High-Voltage All-Solid-State Thin-Film Lithium Batteries Enabled by LiF Interlayer.

All-solid-state thin-film lithium batteries (TFBs) with high voltage are crucial for powering microelectronics systems. However, the issues of interfacial instability and poor solid contact of cathode/electrolyte films have limited their application. In this work, the preferentially orientated LiCoO2 (LCO) nanocolumns and the LCO/LiPON/Li TFBs are fabricated by in situ heating sputtering. By introducing the LiF interlayer, the solid contact of the LCO/LiPON interface is improved, enabling the high-voltage TFBs. The elemental diffusion, morphology change, and interfacial deterioration are suppressed, as demonstrated by various in situ and ex situ tests. As a result, the LCO/LiF/LiPON/Li TFB exhibits a more stable and higher capacity compared to other TFBs. This work provides guidance to improve the solid contact of TFBs and increase the performance of all-solid-state lithium batteries.

Anisotropic materials based on carbohydrate polymers: A review of fabrication strategies, properties, and applications.

Anisotropic structures exist in almost all living organisms to endow them with superior properties and physiological functionalities. However, conventional artificial materials possess unordered isotropic structures, resulting in limited functions and applications. The development of anisotropic structures on carbohydrates is reported to have an impact on their properties and applications. In this review, various alignment strategies for carbohydrates (i.e., cellulose, chitin and alginate) from bottom-up to top-down strategies are discussed, including the rapidly developed innovative technologies such as shear-induced orientation through extrusion-based 3D/4D printing, magnetic-assisted alignment, and electric-induced alignment. The unique properties and wide applications of anisotropic carbohydrate materials across different fields, from biomedical, biosensors, smart actuators, soft conductive materials, to thermal management are also summarized. Finally, recommendations on the selection of fabrication strategies are given. The major challenge lies in the construction of long-range hierarchical alignment with high orientation degree and precise control over complicated architectures. With the future development of hierarchical alignment strategies, alignment control techniques, and alignment mechanism elucidation, the potential of anisotropic carbohydrate materials for scalable manufacture and clinical applications will be fully realized.

Effects of irradiation on the aging and sensory quality of navel orange distilled spirits.

BACKGROUND: 60 Co-γ irradiation can simulate the effects of aging and enhance the flavor of distilled spirits. The present study aimed to investigate the effects of 0, 2, 4, 6, 8 and 10 kGy 60 Co-γ irradiation doses on the key aroma components in newly produced navel orange distilled spirits and thus determine the mechanism of their aging distilled spirits. RESULTS: The identification of aroma compounds demonstrated that ethyl hexanoate, d-limonene, ethyl octanoate, 3-methyl-1-butanol and linalool are the key aroma compounds in navel orange distilled spirits, which were increased except for linalool with irradiation doses of 2-6 kGy. Irradiation treatment simulated the effects of the aging of navel orange distilled spirits by promoting the content of total acids, total esters and aldehydes. Irradiation doses of 2-6 kGy increased the aroma intensity of navel orange distilled spirits, reaching an optimum at 6 kGy. However, irradiation doses as high as 8 and 10 kGy decreased the content of esters in navel orange distilled spirits, which led to a deterioration of the spirit flavor. CONCLUSION: Low doses of 60 Co-γ irradiation can simulate the effects of the aging by increasing the content of key aromatic compounds in navel orange distilled spirits. © 2023 Society of Chemical Industry.

Effect of different ways of ingesting orange essential oil on blood immune index and intestinal microflora in mice.

BACKGROUND: Studies have found that the addition of plant essential oils to feed had a positive effect on intestinal microflora and immunity in mice. However, the effect of different ways of ingestion of orange essential oil on mice has seldom been reported. In the present study, we investigated the effects of ingestion of orange essential oil by gavage, sniffing and feeding on intestinal microflora and immunity in mice. RESULTS: The results obtained showed that a low concentration of essential oil feeding significantly increased the spleen index of mice (P < 0.05). The effect of different ways of ingestion on the thymus index, immunoglobulin G and immunoglobulin M of mice was not significant (P > 0.05). High and medium concentrations of essential oil feeding increased the level of interleukin-2 in mice (P < 0.05). H+ K+ -ATPase activity was significantly increased in mice fed with gavage and different concentrations of essential oil feed compared to the control group (P < 0.05). The analysis of the results of the microflora in the cecum and colon of mice indicated that the medium concentration of essential oil feeding group and the sniffing group significantly changed the structure of the flora and increased the diversity of the intestinal microflora. All three essential oil ingestion methods increased the abundance of Bacteroidetes and Lactobacillus in the intestine of mice. CONCLUSION: Compared with gavage and feeding, sniffing had a significant effect on immunoglobulins in mice. All the three ingestion methods could affect the intestinal microflora of mice and increase the abundance of Lactobacillus. © 2022 Society of Chemical Industry.

Effect of Chromium Content on the Oxidation Behavior of a Ta Stabilized γ'-Strengthened Polycrystalline Co-30Ni-10Al-4W-4Ti-2Ta Alloy.

The high-temperature oxidation behaviors of polycrystalline Co-30Ni-10Al-4W-4Ti-2Ta superalloys with Cr contents ranging from 1 to 5 at.% are characterized at 900 °C to provide benchmark data for the alloy design of the CoNi-based superalloys. The mass gain curves for all three alloys exhibit parabolic growth, and the addition of 5Cr at.% is sufficient to decrease the oxidation rate by two orders of magnitude compared to the Cr-free alloy. Furthermore, cross-sectional findings reveal that these three alloys form qualitatively similar oxide scales composed of an outer oxide layer of Co3O4 and CoAl2O4 phase on top of an Al2O3 scale, following the inner oxide layers of Cr2O3, TiO2, and TiTaO4, and internally oxidized Al2O3 precipitate. The alloy forms a chromium-rich oxide scale as the Cr addition increased, and the concentration of Cr in the scale/alloy interface increases, promoting the growth of Cr2O3, while CoAl2O4 and Co3O4 nucleation is inhibited. The results further indicate that Cr has a superior effect on improving the oxidation resistance of CoNi-based alloys and that a higher content of Cr can assist the formation of a continuous Al2O3, Cr2O3, and TiTaO4 layers, which in turn hampers outer Co and Ni, and inward oxygen flux.

Differential proteomic analysis of citrus flavor (+)-valencene biotransformation to (+)-nootkatone by Yarrowia lipolytica.

Natural products (+)-nootkatone is an important sesquiterpene compound and is widely used in pharmaceutical, cosmetic, agricultural and food industries. The aim of this study was to analyze the differentially expressed proteins (DEPs) during citrus aroma compound (+)-valencene biotransformation to (+)-nootkatone by Yarrowia lipolyticaby with high-throughput LC-MS/MS. A total of 778 proteins were differentially expressed, 385 DEPs were significantly up-regulated and 393 DEPs were markedly down-regulated. It was found that the enzymes transformed (+)-valencene to (+)-nootkatone were mainly existed in yeast intracellular and precipitated under the condition of 30-40 % ammonium sulfate. Most DEPs involved in amino acid and fatty acid metabolism were down-regulated during (+)-valencene biotransformation. The DEPs related to the carbohydrate metabolism, energy metabolism and most of transporter proteins were significantly up-regulated. Furthermore, the key enzymes involved in (+)-valencene transformation might be related to cytochrome P450s (gene2215 and gene2911) and dehydrogenases (gene6493). This is the first time that proteomics was used to investigate the metabolism mechanism of Yarrowia lipolytica during (+)-valencene biotransformation. The proteomic analysis of Yarrowia lipolytica provided a foundation for the molecular regulatory mechanism in the biotransformation to (+)-nootkatone from (+)-valencene.

Sputtering Coating of Lithium Fluoride Film on Lithium Cobalt Oxide Electrodes for Reducing the Polarization of Lithium-Ion Batteries.

Lithium cobalt oxide (LCO) is the most widely used cathode materials in electronic devices due to the high working potential and dense tap density, but the performance is limited by the unstable interfaces at high potential. Herein, LiF thin film is sputtered on the surface of LCO electrodes for enhancing the electrochemical performance and reducing the voltage polarization. The polarization components are discussed and quantified by analyzing the relationship between electrochemical polarization and charger transfer resistance, as well as that between concentration polarization and Li-ion diffusion coefficients. In addition, the decreased charge transfer resistance, increased lithium-ion diffusion coefficients, and stabilized crystal structure of LiF-coated LCO are confirmed by various electrochemical tests and in-situ XRD experiments. Compared to that of pristine LCO, the capacity and cycling performance of LiF-coated LCO is improved, and the overpotential is reduced upon cycling. This work provides reference for quantifying the various polarization components, and the strategy of coating LiF film could be applied in developing other analogous cathode materials.

Recent updates on bioactive properties of linalool.

Natural products, including essential oils and their components, have been used for their bioactivities. Linalool (2,6-dimethyl-2,7-octadien-6-ol) is an aromatic monoterpene alcohol that is widely found in essential oils and is broadly used in perfumes, cosmetics, household cleaners and food additives. This review covers the sources, physicochemical properties, application, synthesis and bioactivities of linalool. The present study focuses on the bioactive properties of linalool, including anticancer, antimicrobial, neuroprotective, anxiolytic, antidepressant, anti-stress, hepatoprotective, renal protective, and lung protective activity and the underlying mechanisms. Besides this, the therapeutic potential of linalool and the prospect of encapsulating linalool are also discussed. Linalool can induce apoptosis of cancer cells via oxidative stress, and at the same time protects normal cells. Linalool exerts antimicrobial effects through disruption of cell membranes. The protective effects of linalool to the liver, kidney and lung are owing to its anti-inflammatory activity. On account of its protective effects and low toxicity, linalool can be used as an adjuvant of anticancer drugs or antibiotics. Therefore, linalool has a great potential to be applied as a natural and safe alternative therapeutic.

[Isolation of polyethylene microbeads in cosmetics by double-density separation].

OBJECTIVE: To develop a stable method for isolation and quantitation of polyethylene microbeads in cosmetics and to observe its morphology and size. METHODS: Polyethylene microbeads were isolated by using the difference of relative density between polyethylene and two kinds of separation solutions( sodium chloride solution and acetonitrile). The contents of polyethylene microbeads in cosmetics were determined by gravimetric method. The morphology and particle size were observed by microscope. RESULTS: A stable method was developed by optimizing experimental method. The recoveries were from 93. 2% to 98. 2%, and the relative standard deviations varied in the range from 0. 16% to 2. 81%. Samples labeled containing microbeads could be isolated polyethylene microbeads, and the contents were from 0. 11% to 7. 76%, and size ranged from 100 µm to 200 µm. The morphology of isolated polyethylene microbeads were mostly regular, and color were mainly blue and white. CONCLUSION: The developed method is simple, repeatable and reliable that can be used for isolation and quantitation of polyethylene microbeads with a density lower than 1 g/cm in cosmetics.