RESUMO
Groundwater nitrate pollution is a major reason for deteriorating water quality and threatens human and animal health. Yet, mitigating groundwater contamination naturally is often complicated since most aquifers are limited in bioavailable carbon. Since metabolically flexible microbes might have advantages for survival, this study presents a detailed description and first results on our modification of the BacTrap© method, aiming to determine the prevailing microbial community's potential to utilize chemolithotrophic pathways. Our microbial trapping devices (MTDs) were amended with four different iron sources and incubated in seven groundwater monitoring wells for â¼3 months to promote growth of nitrate-reducing Fe(II)-oxidizing bacteria (NRFeOxB) in a nitrate-contaminated karst aquifer. Phylogenetic analysis based on 16S rRNA gene sequences implies that the identity of the iron source influenced the microbial community's composition. In addition, high throughput amplicon sequencing revealed increased relative 16S rRNA gene abundances of OTUs affiliated to genera such as Thiobacillus, Rhodobacter, Pseudomonas, Albidiferax, and Sideroxydans. MTD-derived enrichments set up with Fe(II)/nitrate/acetate to isolate potential NRFeOxB, were dominated by e.g., Acidovorax spp., Paracoccus spp. and Propionivibrio spp. MTDs are a cost-effective approach for investigating microorganisms in groundwater and our data not only solidifies the MTD's capacity to provide insights into the metabolic flexibility of the aquifer's microbial community, but also substantiates its metabolic potential for anaerobic Fe(II) oxidation.
Assuntos
Comamonadaceae , Água Subterrânea , Humanos , Ferro , Nitratos/metabolismo , RNA Ribossômico 16S/genética , Filogenia , Minerais , Oxirredução , Compostos Ferrosos/metabolismo , Água Subterrânea/microbiologiaRESUMO
Transport of hydrophobic pollutants in rivers such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and heavy metals is often facilitated by suspended sediment particles, which are typically mobilized during high discharge events. Suspended sediments thus represent a means of transport for particle related pollutants within river reaches and may represent a suitable proxy for average pollutant concentrations estimation in a river reach or catchment. In this study, multiple high discharge/turbidity events were sampled at high temporal resolution in the Globaqua River Basins Sava (Slovenia, Serbia), Adige (Italy), and Evrotas (Greece) and analysed for persistent organic pollutants such as PAHs (polycyclic aromatic hydrocarbons) or PCBs (polychlorinated biphenyls) and heavy metals. For comparison, river bed sediment samples were analysed as well. Further, results are compared to previous studies in contrasting catchments in Germany, Iran, Spain, and beyond. Overall results show that loadings of suspended sediments with pollutants are catchment-specific and relatively stable over time at a given location. For PAHs, loadings on suspended particles mainly correlate to urban pressures (potentially diluted by sediment mass fluxes) in the rivers, whereas metal concentrations mainly display a geogenic origin. By cross-comparison with known urban pressure/sediment yield relationships (e.g. for PAHs) or soil background values (for metals) anthropogenic impact - e.g. caused by industrial activities - may be identified. Sampling of suspended sediments gives much more reliable results compared to sediment grab samples which typically show a more heterogeneous contaminant distribution. Based on mean annual suspended sediment concentrations and distribution coefficients of pollutants the fraction of particle facilitated transport versus dissolved fluxes can be calculated.
RESUMO
The contamination of riverine sediments and suspended matter with hydrophobic pollutants is typically associated with urban land use. However, it is rarely related to the sediment supply of the watershed, because sediment yield data are often missing. We show for a suite of watersheds in two regions of Germany with contrasting land use and geology that the contamination of suspended particles with polycyclic aromatic hydrocarbons (PAH) can be explained by the ratio of inhabitants residing within the watershed and the watershed's sediment yield. The modeling of sediment yields is based on the Revised Universal Soil Loss Equation (RUSLE2015, Panagos et al., 2015) and the sediment delivery ratio (SDR). The applicability of this approach is demonstrated for watersheds ranging in size from 1.4 to 3000km2. The approach implies that the loading of particles with PAH can be assumed as time invariant. This is indicated by additional long-term measurements from sub-watersheds of the upper River Neckar basin, Germany. The parsimonious conceptual approach allows for reasonable predictions of the PAH loading of suspended sediments especially at larger scales. Our findings may easily be used to estimate the vulnerability of river systems to particle-associated urban pollutants with similar input pathways as the PAH or to indicate if contaminant point sources such as sites of legacy pollution exist in a river basin.
RESUMO
Increasing numbers of organic micropollutants are emitted into rivers via municipal wastewaters. Due to their persistence many pollutants pass wastewater treatment plants without substantial removal. Transport and fate of pollutants in receiving waters and export to downstream ecosystems is not well understood. In particular, a better knowledge of processes governing their environmental behavior is needed. Although a lot of data are available concerning the ubiquitous presence of micropollutants in rivers, accurate data on transport and removal rates are lacking. In this paper, a mass balance approach is presented, which is based on the Lagrangian sampling scheme, but extended to account for precise transport velocities and mixing along river stretches. The calculated mass balances allow accurate quantification of pollutants' reactivity along river segments. This is demonstrated for representative members of important groups of micropollutants, e.g. pharmaceuticals, musk fragrances, flame retardants, and pesticides. A model-aided analysis of the measured data series gives insight into the temporal dynamics of removal processes. The occurrence of different removal mechanisms such as photooxidation, microbial degradation, and volatilization is discussed. The results demonstrate, that removal processes are highly variable in time and space and this has to be considered for future studies. The high precision sampling scheme presented could be a powerful tool for quantifying removal processes under different boundary conditions and in river segments with contrasting properties.
Assuntos
Monitoramento Ambiental/métodos , Rios/química , Poluentes Químicos da Água/análise , Águas Residuárias/análiseRESUMO
Transport of many pollutants in rivers is coupled to mobilization of suspended particles which typically occurs during floods. Since the amount of total suspended solids (TSS) in rivers can be monitored by turbidity measurements this may be used as a proxy for the total concentration of particle associated pollutants such as PAHs, PCBs, etc. and several heavy metals. Online turbidity measurements (e.g. by optical backscattering sensors) would then also allow for an assessment of particle and pollutant flux dynamics if once calibrated against TSS and total pollutant concentrations for a given catchment. In this study, distinct flood and thus turbidity events were sampled at high temporal resolution in three contrasting sub-catchments of the River Neckar in Southwest Germany (Ammer, Goldersbach, Steinlach) as well as in the River Neckar itself and investigated for the total amount of PAHs and TSS in water; turbidity (NTU) and grain size distributions of suspended solids were determined as well. Laboratory experiments were performed with natural river bed sediments from different locations (Ammer) to investigate PAH concentrations, TSS and turbidity during sedimentation of suspended particles under controlled conditions (yielding smaller and smaller suspended particles and TSS with time). Laboratory and field results agreed very well and showed that turbidity and TSS were linearly correlated over an extended turbidity range up to 2000 NTU for the field samples and up to 8000 NTU in lab experiments. This also holds for total PAH concentrations which can be reasonably well predicted based on turbidity measurements and TSS vs. PAHs relationships - even for high turbidity values observed during flood events (>2000 NTU). Total PAH concentrations on suspended solids were independent of grain size of suspended particles. This implies that for the rivers investigated the sorption capacity of particles did not change significantly during the observed events.
Assuntos
Monitoramento Ambiental/métodos , Rios/química , Poluentes Químicos da Água/análise , Inundações/estatística & dados numéricos , Sedimentos Geológicos/química , Interações Hidrofóbicas e Hidrofílicas , Modelos Químicos , Bifenilos Policlorados/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Movimentos da ÁguaRESUMO
Water quality of rivers depends often on the degree of urbanization and the population density in the catchment. This study shows results of a monitoring campaign of total concentration of polycyclic aromatic hydrocarbons (PAHs) and suspended particles in water samples in adjacent catchments in Southern Germany with similar geology and climate but different degrees of urbanization. Defined linear relationships between total concentrations of PAHs in water and the amount of suspended solids were obtained indicating predominance of particle-facilitated transport. The slopes of these regressions correspond to the average contamination of suspended particles (C(sus)) and thus comprise a very robust measure of sediment pollution in a river. For the first time, we can show that C(sus) is distinct in the different catchments and correlates to the degree of urbanization represented by the number of inhabitants per total flux of suspended particles.
Assuntos
Monitoramento Ambiental/métodos , Hidrocarbonetos Policíclicos Aromáticos/análise , Poluentes Químicos da Água/análise , Sedimentos Geológicos/química , Alemanha , Rios/química , Urbanização , Poluição Química da Água/estatística & dados numéricosRESUMO
In this study, contaminant leaching from three different secondary materials (demolition waste, municipal solid waste incineration ash, and blast furnace slag) to groundwater is assessed by numerical modeling. Reactive transport simulations for a noise protection dam and a road dam (a typical German autobahn), in which secondary materials are reused as base layers, were performed to predict the breakthrough of a conservative tracer (i.e., a salt) and sorbing contaminants (e.g., PAHs like naphthalene and phenanthrene or heavy metals) at the groundwater table. The dam constructions have a composite architecture with soil covers in inclined layers and distinct contrasts in the unsaturated hydraulic properties of the used materials. Capillary barrier effects result in strong spatial variabilities of flow and transport velocities. Contaminant breakthrough curves at the groundwater table show significant tailing due to slow sorption kinetics and a wide distribution of travel times. While conservative tracer breakthrough depends primarily on subsoil hydraulic properties, equilibrium distribution coefficients and sorption kinetics represent additional controlling factors for contaminant spreading. Hence, the three secondary materials show pronounced differences in the temporal development of leached contaminant concentrations with consequences for breakthrough times and peak concentrations at the groundwater table. Significant concentration reductions due to dispersion occur only if the source concentrations decrease significantly prior to the arrival of the contaminant at the groundwater table. Biodegradation causes significant reduction of breakthrough concentrations only if flow velocities are low.
Assuntos
Materiais de Construção/análise , Modelos Teóricos , Ruído/prevenção & controle , Meios de Transporte , Água/química , Conservação dos Recursos Naturais , Eliminação de Resíduos , Fatores de TempoRESUMO
Desorption experiments were carried out in flow through columns following long-term sorption batch experiments (up to 1010 days at 20 degrees C; Rügner, H.; Kleineidam, S.; Grathwohl, P. Long-term sorption kinetics of phenanthrene in aquifer materials. Environ. Sci. Technol. 1999, 33, 1645-1651) to elucidate sorption/desorption hysteresis phenomena of phenanthrene in aquifer materials. Most of the sorbents employed in this study (homogeneous lithocomponents separated from aquifer sediments or fresh rock fragments) showed highly nonlinear sorption isotherms because of coal particles embedded inside the grains. Because sorption capacities were high, sorption equilibrium was not reached in most of the sorbents during the initial sorptive uptake experiments lasting up to 1010 days. Desorption was studied up to 90 days at 20 degrees C. The temperature was raised after that stepwise from originally 20 to 30, 40, 50, and finally to 70 degrees C for selected samples to estimate activation energies of desorption. A numerical intraparticle pore diffusion model was used to fit sorptive uptake data and subsequently for pure forward prediction of the release rates in the desorption column experiments. Desorption was initially fast followed by extended tailing which in other studies is fitted by using multirate first-order models. Our results demonstrate that the retarded intraparticle pore diffusion model can predict the desorption rates with a single diffusion rate constant obtained independently from the long-term batch sorption experiment. No evidence for hysteresis was found, suggesting that many hysteresis phenomena reported earlier are experimental artifacts resulting from nonequilibrium effects and "nonphysical" models. The different temperature steps allowed one to additionally calculate activation energies of desorption (45-59 kJ mol(-1)), which were in reasonably good agreement with results from earlier studies for a retarded pore diffusion process. In addition, equilibrium sorption isotherms were determined at 20 and 40 degrees C to compare sorption and desorption enthalpies. Both were in good agreement, confirming that desorption was not significantly different from sorption.