Didodecyldimethylammonium Bromide Role in Anchoring Gold Nanoparticles onto Liposome Surface for Triggering the Drug Release.

Liposomes with their capacity to anchor gold nanoparticles (AuNPs) onto their surface are used in the treatment of several pathologies such as cancer. The objective of this work was the optimization of the vesicle composition by using cationic agents in order to reinforce the anchoring process of AuNPs, and for the study of the influence of local temperature and vesicle size on drug release. A Plackett-Burman design was conducted to determine the optimal composition for the anchoring of AuNPs. A comprehensive study of the influence of lipid bilayer composition on the surface charge, size, and polydispersity index (PdI) of liposomes was carried out. Afterwards, in vitro release studies by dialysis were performed and several release parameters were evaluated as a function of temperature. Cholesterol was fixed as the rigid agent and Didodecyldimethylammonium bromide (DDAB) was selected as the cationic lipid into the liposome bilayer. Photomicrographs revealed that DDAB facilitated the anchoring of AuNPs onto the liposomal surface. The anchoring of AuNPs also enhanced the amount and rate of calcein released, especially in extruded samples, at several incubating temperatures. In addition, it was observed that both the anchoring of AuNPs and the calcein release were improved by increasing the surface of the vesicles. The contributions of liposome composition (DDAB inclusion, incubation temperature, anchoring of AuNPs) and size and surface availability of the vesicles on calcein release could be used to design improved lipid nanostructures for the controlled release of anticancer drugs.

Ophthalmic administration of a 10-fold-lower dose of conventional nanoliposome formulations caused levels of intraocular pressure similar to those induced by marketed eye drops.

The purpose of this study was to compare the in vivo efficacy of several timolol (TM)-loaded liposomal formulations with current TM antiglaucoma treatment (aqueous 0.5% w/v eye drops). In this study, conventional liposomes (CL) and deformable liposomes, without (DL1) and with ethanol (DL2) were prepared and characterized. In addition, in vitro release and permeation studies, as well as in vivo lowering intraocular pressure (IOP) and biocompatibility studies were performed. It was found that the quali and quantitative lipid bilayer composition played a significant role in modifying the physical properties of vesicles. The deformability study and electronic microscopy images revealed that membrane elasticity of DL1 and DL2 was much higher than CL. However, in vitro permeation results showed that the flux and permeability coefficient were significantly higher in CL compared to DL. The IOP study revealed that TM-loaded CL showed the best pharmacological activity, in comparison to deformable vesicles. Compared to the eye drops, CL formulation could equally reduce the IOP but using a concentration 10-fold lower, whereas the effective time was significantly longer. In addition, the formulations showed no irritant effects after instillation on the ocular surface.

Deformability properties of timolol-loaded transfersomes based on the extrusion mechanism. Statistical optimization of the process.

The purpose of this work was to analyze the deformability properties of different timolol maleate (TM)-loaded transfersomes by extrusion. This was performed because elastic liposomes may contribute to the elevation of amount and rate of drug permeation through the corneal membrane. This paper describes the optimization of a transfersome formulation by use of Taguchi orthogonal experimental design and two different statistical analysis approaches were utilized. The amount of cholesterol (F1), the amount of edge-activator (F2), the distribution of the drug into the vesicle (F3), the addition of stearylamine (F4) and the type of edge-activator (F5) were selected as causal factors. The deformability index, the phosphorous recovery, the vesicle size, the polydispersity index, the zeta potential and percentage of drug entrapped were fixed as the dependent variables and these responses were evaluated for each formulation. Two different statistical analysis approaches were applied. The better statistical approach was determined by comparing their prediction errors, where regression analysis provided better optimized responses than marginal means. From the study, an optimized formulation of TM-loaded transfersomes was prepared and obtained for the proposed ophthalmic delivery for the treatment of open angle glaucoma. It was found that the lipid to surfactant ratio and type of surfactant are the main key factors for determining the flexibility of the bilayer of transfersomes. From in vitro permeation studies, we can conclude that TM-loaded transfersomes may enhance the corneal transmittance and improve the bioavailability of conventional TM delivery.

Surface functionalizing of a lipid nanosystem to promote brain targeting: step-by-step design and physico-chemical characterization.

The use of lipid nanosystems as drug delivery to the central nervous system may be advantageous over the current strategies. The aim of this study was to develop and characterize functionalized liposomes for treatment of brain diseases. The covalent method of coupling IgG to liposomes via the derivatized lipid 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-[4-(p-maleimidophenyl)butyramide](MPB-PE) was investigated. Optimized coupling conditions are shown to result in the efficient conjugation of IgG to liposomes containing low concentrations of MPB-PE (3/1 SH:IgG). The qualitative analysis has shown that after the extrusion process, more homogeneous populations of vesicles have been obtained with a nanometric size suitable to be effective to further anchor the protein. Negative values of zeta potential demonstrate that they are stable systems. Lyophilization was used to maintain the stability of the formulation. These very interesting results encourage further investigations to formulate peptide- and protein-loaded immunoliposomes, making targeting of liposomes as an attractive approach for brain drug delivery.

Development and validation of a high performance chromatographic method for determining sumatriptan in niosomes.

In this paper, a novel, precise, specific, accurate and rapid reversed-phase high performance liquid chromatographic method was developed, optimized and validated for determining sumatriptan succinate in niosomes with the best chromatographic peak resolution, reduced run time and low cost of analysis. The formulation has been previously optimized in terms of composition and preparation technique to obtain a high drug encapsulation efficiency and adequate vesicle size distribution. This method showed the best resolution by using Spherisorb OSD2 C18 column (250 mm × 4.6 mm, 5 µm) using phosphate buffer (0.05 M):acetonitrile (80:20, v/v; pH adjusted to 6.0) as a mobile phase at a flow rate of 1 mL/min and wavelength of 214 nm. The main objective of this research was to demonstrate the robustness of the reversed-phase HPLC method development by applying the Taguchi robust methodology. The signal-to-noise ratio (S/N) was employed as a quality measurement. This tool permits to establish the influence of some selected factors (acetonitrile:phosphate ratio, pH buffer, oven temperature and flow rate) on two responses (peak areas and retention time). On the basis of the results obtained, we can conclude that this analytical method was robust for all the factors studies, as exception of the flow rate, where the higher quality was obtained for the fewer values (0.8 mL/min). Therefore, this parameter must be carefully controlled when this method was employed, to avoid any modification in the peak areas overall.

Robust optimization of alginate-Carbopol 940 bead formulations.

Formulation process is a very complex activity which sometimes implicates taking decisions about parameters or variables to obtain the best results in a high variability or uncertainty context. Therefore, robust optimization tools can be very useful for obtaining high quality formulations. This paper proposes the optimization of different responses through the robust Taguchi method. Each response was evaluated like a noise variable, allowing the application of Taguchi techniques to obtain a response under the point of view of the signal to noise ratio. A L(18) Taguchi orthogonal array design was employed to investigate the effect of eight independent variables involved in the formulation of alginate-Carbopol beads. Responses evaluated were related to drug release profile from beads (t(50%) and AUC), swelling performance, encapsulation efficiency, shape and size parameters. Confirmation tests to verify the prediction model were carried out and the obtained results were very similar to those predicted in every profile. Results reveal that the robust optimization is a very useful approach that allows greater precision and accuracy to the desired value.

Charged liposomes as carriers to enhance the permeation through the skin.

INTRODUCTION: In recent years, there has been increased interest in developing charged liposomes as carriers for transdermal drug delivery. It is necessary to modify the basic composition of the liposomes in order to enhance the penetration properties of the vesicles through the skin. Charged liposomes offer several advantages compared with previous drug delivery systems. AREAS COVERED: This paper provides a brief overview of the different drug delivery systems that exist which aim to improve the permeation of drugs through the skin, focusing on the use of charged liposomes for transdermal delivery. We propose a classification of such liposomes based on the origin of the charge given to the vesicles. EXPERT OPINION: Despite the advances that are occurring in the design of charged liposomes for transdermal drug delivery, the long-term stability continues to be a drawback in such systems. The presence of charge on the surface of the vesicles favors the electrostatic repulsion among them, creating a ζ potential positive or negative that prevents their aggregation and flocculation. However, there is loss of the encapsulated drug, which limits the in vivo use of these systems. It should be emphasized that charged liposomes are indeed a promising candidate for use in gene therapy and vaccine targeting, in a great diversity of diseases, for which drugs are administered by the percutaneous route.

New "drug-in cyclodextrin-in deformable liposomes" formulations to improve the therapeutic efficacy of local anaesthetics.

The combined approach of cyclodextrin complexation and entrapment in liposomes was investigated to develop a topical formulation of local anaesthetics. For both benzocaine (BZC) and butamben (BTM), hydroxypropyl-beta-cyclodextrin (HPbetaCD) was a better partner than betaCD; drug-HPbetaCD coevaporated products showed the best solubility and dissolution properties, and were selected for loading into liposomes. Addition of stearylamine to the phosphatidylcholine-cholesterol mixture of the vesicle bilayer allowed obtainment of deformable liposomes with improved permeation and in vivo drug anaesthetic effect (P<0.05). Double-loaded deformable liposomes were obtained by adding the drug-HPbetaCD complex at its maximum aqueous solubility in the vesicles hydrophilic phase, and the remaining amount up to 1% as free drug in the lipophilic phase. The properties of double-loaded liposomes were compared with those of classic single-loaded ones, obtained by adding 1% free drug in the aqueous or lipophilic phase of the vesicles. Size, charge, morphology and entrapment efficiency of the different batches were investigated, respectively, by light scattering, confocal laser scanning microscopy and dialysis, while their therapeutic efficacy was evaluated in vivo on rabbits. For both drugs, double-loaded liposomes, exploiting the favourable effects of drug-CD complexation, allowed a significant (P<0.05) enhancement of intensity and duration of anaesthetic effect with respect to those single-loaded.

Development and validation of a reverse-phase liquid chromatographic method for the assay of lidocaine hydrochloride in alginate-Gantrez microspheres.

A simple, fast and reliable reverse-phase high-performance liquid chromatographic (HPLC) method was developed for the assay of lidocaine hydrochloride (LH) in Gantrez-alginate microspheres. Separation was achieved in a LiChrospher C18 column, using a mobile phase consisting of acetonitrile:ammonium acetate (0.0257 M) adjusted to pH 4.85 with acetic acid, in the ratio 70:30 (v/v) and a flow rate of 0.6 mL/min. The detection was made with a diode array detector measuring at the maximum for the compound. The validation study demonstrated that the method was precise, accurate and linear over the concentration range of analysis with a limit of detection of 0.001 mg/mL. The limit of quantification was 0.002 mg/mL. Linear regression analysis in the range of 0.8-2.4 mg/mL gave correlation coefficients higher than 0.995. The method developed was applied to the analysis of lidocaine in microsphere samples in order to evaluate in next papers, the encapsulation efficiency of different formulations.

Application of statistical experimental design to study the formulation variables influencing the coating process of lidocaine liposomes.

In this paper, we have used statistical experimental design to investigate the effect of several factors in coating process of lidocaine hydrochloride (LID) liposomes by a biodegradable polymer (chitosan, CH). These variables were the concentration of CH coating solution, the dripping rate of this solution on the liposome colloidal dispersion, the stirring rate, the time since the liposome production to the liposome coating and finally the amount of drug entrapped into liposomes. The selected response variables were drug encapsulation efficiency (EE, %), coating efficiency (CE, %) and zeta potential. Liposomes were obtained by thin-layer evaporation method. They were subsequently coated with CH according the experimental plan provided by a fractional factorial (2(5-1)) screening matrix. We have used spectroscopic methods to determine the zeta potential values. The EE (%) assay was carried out in dialysis bags and the brilliant red probe was used to determine CE (%) due to its property of forming molecular complexes with CH. The graphic analysis of the effects allowed the identification of the main formulation and technological factors by the analysis of the selected responses and permitted the determination of the proper level of these factors for the response improvement. Moreover, fractional design allowed quantifying the interactions between the factors, which will consider in next experiments. The results obtained pointed out that LID amount was the predominant factor that increased the drug entrapment capacity (EE). The CE (%) response was mainly affected by the concentration of the CH solution and the stirring rate, although all the interactions between the main factors have statistical significance.

Effect of cholesterol and ethanol on dermal delivery from DPPC liposomes.

The main objective of the present work was to compare the dermal delivery of minoxidil (Mx), a lipophilic drug from ethosomes versus classic liposomes, containing different cholesterol (CHOL) concentrations. All the systems were characterized for shape, lamellarity, particle size and entrapment efficiency percentage (EE), by transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM), laser diffraction and ultracentrifugation or dialysis methods, respectively. Multilamellar vesicles (MLVs) were obtained and one to six lamellae were visualized by CLSM. The presence of ethanol in the formulations affects the particle size in terms of reducing this parameter. In addition, it was possible to appreciate the influence of CHOL on the vesicle size, because it was increased, as CHOL concentration was higher. When the EE was determined by two different methods (ultracentrifugation and dialysis methods), a clear losing of entrapped drug by the ultracentrifugation method was observed, because the strong energy transmitted to the samples disrupted vesicles. Vesicles were non-occlusively applied on rat skin and the permeation pattern of the different systems, depth into the skin and the main permeation pathway were studied by using beta-carotene as a fluorescent probe. CLSM studies showed that ethosomal systems were much more efficient at delivering the fluorescent substance into the skin in terms of quantity and depth, than either liposomes or hydroalcoholic solutions.

Modified doxorubicin for improved encapsulation in PVA polymeric micelles.

Polyvinylalcohol, partially substituted with lipophilic acyl chains, generates polymeric micelles in aqueous phase, containing a hydrophobic core able to encapsulate lipophilic drugs. Two types of polymers were obtained by conjugation of polyvinylalcohol with oleoyl or linoleoyl chains as pendant groups. The polymers, at a substitution degree of approximately 1%, are soluble in water and form polymeric micelles whose size increases with polymer concentration. Doxorubicin was hydrophobized, by linking an oleoyl chain via amide bond, to make the drug more similar to the substituted polymers and promote its encapsulation into the inner core of the micelles. The properties of the drug-polymer systems were evaluated in solution by dynamic light scattering technique and correlated to the physicochemical characteristics of the drug and the substituted polymers. Solubilization tests revealed that the similarity of the chain, in both the polymer and the drug, promotes better drug encapsulation in the oleoyl than linoleoyl derivative. The drug-polymer systems are stable in phosphate buffer saline (pH 7.4) at 37 degrees C, and the release of the drug is activated by the presence of the proteolytic enzyme pronase-E. The enzyme activated drug release and the size of the polymeric micelles, compatible with the pore dimensions of the tumor vessels, make these systems interesting for targeting lipophilic drugs to solid tumors, where the proteolytic enzyme concentration strongly raises with respect to the other body compartments.

Characterization of ibuproxam binary and ternary dispersions with hydrophilic carriers.

This work investigates the possibility of increasing the dissolution properties of ibuproxam (a poorly water-soluble anti-inflammatory drug) using hydrophilic carriers such as polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), or urea, alone or in combination. Phase-solubility studies showed that the carrier solubilizing power was in the order PEG>PVP>urea and evidenced a synergistic effect in drug solubility improvement when using carrier combinations. Binary and ternary systems, at 20/80 or 20/40/40 (w/w) drug/carrier(s) ratios, prepared by coevaporation of their ethanolic solutions or by cogrinding physical mixtures in a high-energy vibrational micromill, were characterized by differential scanning calorimetry (DSC), hot stage microscopy (HSM), and scanning electron microscopy (SEM) analyses. The results of dissolution tests (USP paddle method), in terms of Dissolution Efficiency, indicated that ternary systems were up to 35% more effective than the corresponding binary preparations and coevaporated products were up to 45% more efficacious than the corresponding coground ones. The IBUX-PEG-PVP coevaporated was the best product, allowing a more than three-times increase in Dissolution Efficiency with respect to drug alone; moreover, t50% (> 60 min for pure ibuproxam) was < 10 min, and 90% dissolution was achieved after 30 min, whereas only 40% was obtained after 60 min for pure drug. The best performance of this system was attributed to a joined effect of the strong amorphizing power of PVP (as demonstrated by solid state analyses) with the high solubilizing efficacy of PEG (as emerged from phase-solubility studies). The drug dissolution rate from solid dispersions remained practically unchanged after one-year storage at room temperature in closed containers.

Study of glimepiride-b-cyclodextrin complex.

The interaction of glimepiride with b-cyclodextrin (b-CD) has been studied by several analytical techniques, including 1H NMR, infrared spectroscopy (FTIR), powder x-ray diffractometry (XRD), thermal analysis (DSC) and scanning electron microscopy (SEM). The existence of an inclusion complex was proved in solution by phase solubility techniques and 1H NMR, and in the solid state by DSC, FTIR and XRD, being isolated by sealed heating and freeze drying procedures.

Eudragit RS-PM and Ethocel 100 Premium: influence over the behavior of didanosine inert matrix system.

Inert matrices of didanosine (ddI) were elaborated as controlled release dosage forms, using two different types of polymers: Eudragit RS-PM, an anionic acrylic acid copolymer, and Ethocel 100 Premium, an ethylcellulose. A preformulation study of the drug was designed to address the following points: (a) the development of two alternative methods (high performance liquid chromatography (HPLC) and UV spectrophotometry) for the analysis and quantifying of ddI; (b) the determination of the aqueous solubility of ddI; and (c) the characterization of ddI from the following points of view: morphological (scanning electronic microscopy (SEM)) and thermal (differential scanning calorimetry (DSC)). Furthermore, some of these techniques were used for the characterization of those components which will be included in the oral controlled release system to be developed. The in vitro release of ddI matrices was studied at pH 7.4, because of the instability of ddI at pH values lower than 3 units. A significant reduction in the release rate of drug from both ddI controlled release systems was found. Furthermore, Ethocel 100 Premium showed a minor efficiency in the dissolution process, with a reduction of more than double in the final dissolution efficiency (DE) value. This parameter and the fit factors (f1 and f2) have been compared for the characterization of dissolution profiles.

Alginate/chitosan particulate systems for sodium diclofenac release.

Alginate/chitosan particles were prepared by ionic gelation (Ca2+ and Al3+) for the sodium diclofenac release. The systems were characterized by electron microscopy and differential scanning calorimetry. The ability to release the active substance was examined as a function of some technological parameters and pH of dissolution medium. The release of sodium diclofenac is prevented at acidic pH, while is complete in a few minutes when pH is raised up to 6.4 and 7.2. The alginate/chitosan ratio and the nature of the gelifying cation allow a control of the release rate of the drug. The release mechanism was briefly discussed.

Channeling agent and drug release from a central core matrix tablet.

A new oral dosage form for controlled and complete release of drug after a predetermined lag time is described. The system, designed to exploit the relatively constant small intestine transit time, consists of a drug-containing core coated with a polymeric matrix formed by a channeling agent (NaCl, mannitol, and Emdex) and an inert polymer (Eudragit RS100). The lag time was found to be dependent on type and particle size of the channeling substances used. Also, rheological properties of the binary mixtures (channeling substance--polymer) can affect the lag time periods. On the other hand, the release kinetics were found to be influenced significantly by excipient type and particle size. Results obtained from in vitro dissolution testing demonstrated that this device potentially could be used to deliver drugs orally for up to once-a-day dosing at controllable rates.

Estimation of the percolation thresholds in dextromethorphan hydrobromide matrices.

Percolation theory is a multidisciplinary theory that studies chaotic systems. It has been applied in the pharmaceutical field since 1987. Knowledge of the percolation threshold -- one of the most important concepts in percolation theory -- results in a clear improvement of the solid dosage form design. The percolation threshold is the concentration showing the maximum probability to obtain, for the first time, a percolating cluster of a substance. In this work, the percolation thresholds of dextromethorphan.HBr/Eudragit RS-PM inert matrices were estimated. The drug percolation threshold was estimated as 0.3691+/-0.0541 (P=0.05) of the total porosity (ranging between 23 and 36% w/w of drug). The SEM micrographs of the matrices are consistent with the estimated percolation range. In agreement with previous reports, different percolation thresholds were found for the matrix forming excipient Eudragit RS-PM. The site percolation threshold (based on the release properties) ranged between 10 and 20% v/v of the excipient, the site-bond percolation threshold (estimated from the mechanical properties) between 29.5 and 34% v/v of the excipient and the swelling percolation threshold between 34.3 and 46.9% v/v of the excipient. These percolation ranges are in agreement with those found previously for Eudragit RS-PM matrices containing naltrexone.HCl and morphine.HCl.

Design of controlled release inert matrices of naltrexone hydrochloride based on percolation concepts.

The percolation theory is a statistical theory able to study chaotic or disordered systems that has been applied in the pharmaceutical field since 1987. Through the application of this theory, the design of controlled release inert matrices has been improved. The aim of the present paper is to estimate the percolation thresholds, the most important concept of the percolation theory, which characterise the release behaviour of controlled release inert matrices of naltrexone hydrochloride. Matrix tablets were prepared using naltrexone hydrochloride as a potent narcotic antagonist and Eudragit(R) RS-PM as matrix forming material in different ratios, keeping constant the drug and excipient particle sizes. In vitro release assays were carried out exposing only one side of the tablets to the dissolution medium. The drug percolation threshold was estimated using different methods. The method of Leuenberger and Bonny gives 31.11+/-7.95% v/v as the critical porosity, which corresponds to a percolation range from 12 to 20% (w/w) of drug content. The release profiles and the release kinetics are in agreement with this result. A change in the exponent k (from 0.29 to 0.57) has been found in this region. Using scanning electron microscopy, the percolation threshold has been observed in a higher concentration range (20-35% w/w). This fact can be attributed to the low accuracy of the visual methods, mainly due to the extrapolation from 2D to 3D systems. If a percolating cluster is observed in two dimensions, the percolation threshold of the 3D system will be already clearly exceeded. The excipient percolation threshold is estimated between 25.4 and 31.1% (v/v) based on the release profiles and the analysis of the release kinetics.

Effect of the temperature on a hydrate diclofenac salt.

The salt Diclofenac/N-(2-hydroxyethyl) pyrrolidine when crystallizes from water forms a di-hydrate, which looses the crystallization water molecules on heating or in the presence of silica gel, undergoing a phase transition. The two processes were followed at room temperature, at 40 and 50 degrees C by thermal analysis and analyzing the dimensional parameters obtained by scanning electron microscopy as a function of the changes occurring in the solid state. The fractal dimension of the particle surface (DS) was determined for the di-hydrate, the anhydrate and the anhydrous forms: DS values are close together suggesting that the processes modify only slightly the external morphology of the particles. The reactive dimension (DR) to dissolution suggests that the salt after the thermal treatment has a dissolution behaviour identical to that observed for the salt obtained from organic solvents. The two processes de-hydration and phase transition can be carried out at relatively low temperature, suggesting an important pathway to obtain the anhydrous form starting from the di-hydrate one.