Benchtop Flow Stasis Quantification: In Vitro Methods and In Vivo Possibilities.

PURPOSE: Neo-sinus flow stasis has ben correlated with transcatheter heart valve (THV) thrombosis severity and occurrence. Standard benchtop flow field quantification techniques require optical access or modified prosthesis models that may not reflect the true nature of the original valve. En face and fluoroscopic videodensitometry enable visualization of washout in regions otherwise unviewable. METHODS: This study compares two in vitro methods of assessing flow stasis in scenarios with insufficient optical access for traditional techniques such as particle image velocimetry (PIV). A series of seven paired experiments were conducted using a previously described laser-enhanced video densitometry (LEVD) and fluoroscopic video densitometry (FVD). Both sets of experiments were analyzed to calculate washout time as a measure of flow stasis. A novel flow stasis measure termed contrast attenuation ratio (CAR) is proposed as a viable single measure of flow stasis obtainable from only a small number of cardiac cycles of in vitro or in vivo fluoroscopic data. Retrospective fluoroscopic datasets (n = 72) were analyzed to assess the feasibility of obtaining this metric from routine clinical practice and its ability to stratify results. RESULTS: Neo-sinus flow stasis calculated from in vitro fluoroscopy was well correlated with LEVD (r2 = 0.77, p = 0.009). The newly proposed CAR metric showed good agreement with the commonly used "washout time" measure of flow stasis (r2 = 0.91, p < 0.001) while allowing for assessment with incomplete or truncated data. As a proof of concept, CAR was measured in 72 consecutive retrospective fluoroscopic datasets. CAR averaged 10.6 ± 4.6% with a range of 1.5-20.3% in these patients. CONCLUSIONS: This study demonstrates two in vitro methods that can be used to assess relative flow stasis in otherwise optically inaccessible regions surrounding cardiac or vascular implants. In addition, the fluoroscopic benchtop technique was used to validate a metric that allows for extension to routine clinical fluoroscopy. This contrast attenuation ratio (CAR) metric was found to be both accurate and clinically obtainable, and potentially offers a new method for valve thrombosis risk stratification.

Spatio-temporal Relationship between Three-Dimensional Deformations of a Collapsible Tube and the Downstream Flowfield.

The interactions between fluid flow and structural components of collapsible tubes are representative of those in several physiological systems. Although extensively studied, there exists a lack of characterization of the three-dimensionality in the structural deformations of the tube and its influence on the flow field. This experimental study investigates the spatio-temporal relationship between 3D tube geometry and the downstream flow field under conditions of fully open, closed, and slamming-type oscillating regimes. A methodology is implemented to simultaneously measure three-dimensional surface deformations in a collapsible tube and the corresponding downstream flow field. Stereophotogrammetry was used to measure tube deformations, and simultaneous flow field measurements included pressure and planar Particle Image Velocimetry (PIV) data downstream of the collapsible tube. The results indicate that the location of the largest collapse in the tube occurs close to the downstream end of the tube. In the oscillating regime, sections of the tube downstream of the largest mean collapse experience the largest oscillations in the entire tube that are completely coherent and in phase. At a certain streamwise distance upstream of the largest collapse, a switch in the direction of oscillations occurs with respect to those downstream. Physically, when the tube experiences constriction downstream of the location of the largest mean collapse, this causes the accumulation of fluid and build-up of pressure in the upstream regions and an expansion of these sections. Fluctuations in the downstream flow field are significantly influenced by tube fluctuations along the minor axes. The fluctuations in the downstream flowfield are influenced by the propagation of disturbances due to oscillations in tube geometry, through the advection of fluid through the tube. Further, the manifestation of the LU-type pressure fluctuations is found to be due to the variation in the propagation speed of the disturbances during the different stages within a period of oscillation of the tube.

Aerodynamic response of a red-tailed hawk to discrete transverse gusts.

A limiting factor in the design of smaller size uncrewed aerial vehicles is their inability to navigate through gust-laden environments. As a result, engineers have turned towards bio-inspired engineering approaches for gust mitigation techniques. In this study, the aerodynamics of a red-tailed hawk's response to variable-magnitude discrete transverse gusts was investigated. The hawk was flown in an indoor flight arena instrumented by multiple high-speed cameras to quantify the 3D motion of the bird as it navigated through the gust. The hawk maintained its flapping motion across the gust in all runs; however, it encountered the gust at different points in the flapping pattern depending on the run and gust magnitude. The hawk responded with a downwards pitching motion of the wing, decreasing the wing pitch angle to between -20∘and -5∘, and remained in this configuration until gust exit. The wing pitch data was then applied to a lower-order aerodynamic model that estimated lift coefficients across the wing. In gusts slower than the forward flight velocity (low gust ratio), the lift coefficient increases at a low-rate, to a maximum of around 2-2.5. In gusts faster than the forward flight velocity (high gust ratio), the lift coefficient initially increased rapidly, before increasing at a low-rate to a value around 4-5. In both regimes, the hawk's observed height change due to gust interaction was similar (and small), despite larger estimated lift coefficients over the high gust regime. This suggests another mitigation factor apart from the wing response is present. One potential factor is the tail pitching response observed here, which prior work has shown serves to mitigate pitch disturbances from gusts.

Influence of Pulsatility and Inflow Waveforms on Tracheal Airflow Dynamics in Healthy Older Adults.

Tracheal collapsibility is a dynamic process altering local airflow dynamics. Patient-specific simulation is a powerful technique to explore the physiological and pathological characteristics of human airways. One of the key considerations in implementing airway computations is choosing the right inlet boundary conditions that can act as a surrogate model for understanding realistic airflow simulations. To this end, we numerically examine airflow patterns under the influence of different profiles, i.e., flat, parabolic, and Womersley, and compare these with a realistic inlet obtained from experiments. Simulations are performed in ten patient-specific cases with normal and rapid breathing rates during the inhalation phase of the respiration cycle. At normal breathing, velocity and vorticity contours reveal primary flow structures on the sagittal plane that impart strength to cross-plane vortices. Rapid breathing, however, encounters small recirculation zones. Quantitative flow metrics are evaluated using time-averaged wall shear stress (TAWSS) and oscillatory shear index (OSI). Overall, the flow metrics encountered in a real velocity profile are in close agreement with parabolic and Womersley profiles for normal conditions, however, the Womersley inlet alone conforms to a realistic profile under rapid breathing conditions.

Influence of expiratory flow pulsatility on the effectiveness of a surgical mask.

BACKGROUND: Expiratory events, such as coughs, are often pulsatile in nature and result in vortical flow structures that transport expiratory particles. The World Health Organization recommends wearing face masks to reduce the airborne transmission of diseases such as SARS-CoV-2 (COVID-19). However, masks are not perfect as flow leakage occurs around the mask, and their effectiveness under realistic (multi-pulse) coughing conditions is unknown. OBJECTIVE: To assess the influence of expiratory flow pulsatility on the effectiveness of a surgical face mask by quantifying and classifying the flow leakage around the mask. METHODS: A custom-built pulsatile expiratory flow simulator is used to generate single- and multi-pulsed coughing events. Flow visualization and particle image velocimetry are used to assess the penetration distance and volume of leakage flow at the top and sides of a surgical mask. RESULTS: Leakage flow velocity profiles at the top and sides of a surgical mask take the form of a wall jet and a free-shear jet, respectively. Multi-pulsed expiratory flow events are found to generate greater leakage flow around the mask than single-pulsed events. SIGNIFICANCE: For the first time, the leakage volume of a surgical mask is shown to be correlated to the pulsatile nature of a cough. IMPACT STATEMENT: The novelties of this study are: First, flow field measurements are used to quantify and classify the leakage flow fields around the top and sides of a surgical mask, providing a benchmark for quantitative modeling of leakage flow velocity profiles. Second, the influence of pulsatility on the effectiveness of surgical face masks is studied by quantifying the leakage volume. For the first time, the leakage volume of a surgical mask is shown to be correlated to the pulsatile nature of a cough, as multi-pulsed expiratory flow events are found to generate greater flow leakage around the mask than single-pulsed events.

Transcatheter aortic valve thrombosis: a review of potential mechanisms.

Transcatheter aortic valve (TAV) thrombosis has been recognized as a significant problem that sometimes occurs as early as within 30 days after valve implantation, leading to increased concerns of stroke and long-term valve durability. In this article, a critical summary of the relevant literature on identifying potential mechanisms of TAV thrombosis from the perspective of the well-known Virchow's triad, which comprises blood flow, foreign materials and blood biochemistry, is presented. Blood flow mechanisms have been the primary focus thus far, with a general consensus on the flow mechanisms with respect to haemodynamic conditions, the influence of TAV placement and expansion and the influence of coronary flow. Less attention has been paid to the influence of blood biochemistry and foreign materials (and related endothelial damage), with little consensus among studies with regards to platelet and/or microparticle levels post-TAV implantation. Finally, we discuss the future outlook for research with unanswered scientific questions.

Experimental characterization of speech aerosol dispersion dynamics.

Contact and inhalation of virions-carrying human aerosols represent the primary transmission pathway for airborne diseases including the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Relative to sneezing and coughing, non-symptomatic aerosol-producing activities such as speaking are highly understudied. The dispersions of aerosols from vocalization by a human subject are hereby quantified using high-speed particle image velocimetry. Syllables of different aerosol production rates were tested and compared to coughing. Results indicate aerosol productions and penetrations are not correlated. E.g. 'ti' and 'ma' have similar production rates but only 'ti' penetrated as far as coughs. All cases exhibited a rapidly penetrating "jet phase" followed by a slow "puff phase." Immediate dilution of aerosols was prevented by vortex ring flow structures that concentrated particles toward the plume-front. A high-fidelity assessment of risks to exposure must account for aerosol production rate, penetration, plume direction and the prevailing air current.

Transcatheter aortic valve deployment influences neo-sinus thrombosis risk: An in vitro flow study.

OBJECTIVES: We investigated the impact of (transcatheter heart valve) THV expansion at the level of the native annulus and implant depth on valve performance and neo-sinus flow stasis. BACKGROUND: Flow stasis in the neo-sinus is one of the identified risk factors of THV thrombosis. METHODS: A 29 mm CoreValve and 26 mm SAPIEN 3 were deployed under different expansions (CoreValve, SAPIEN 3) and implant depths (CoreValve) within a patient-derived aortic root in a pulse duplicator. Fluorescent dye was injected during diastole into the neo-sinus and imaged over 20 cardiac cycles. Washout times were computed as a measure of flow stasis for each deployment. RESULTS: The 10% CoreValve under-expansion improved neo-sinus washout over full expansion by 8% (p < .001), and higher CoreValve implant depth improved neo-sinus washout (p < .001). The 10% SAPIEN 3 under-expansion improved neo-sinus washout by 23% (p < .001). Under-expansion of both valve types caused higher pressure gradients and smaller effective orifice areas than full expansion. CONCLUSIONS: Neo-sinus flow stasis is influenced by THV expansion and implant depth (CoreValve). The 10% valve under-deployment (oversizing) may facilitate reduced flow stasis in the neo-sinus with minimal increase in pressure gradients. This strategy may be helpful for patient anatomies, which are in-between transcatheter valve sizes.

A mechanistic investigation of the EDWARDS INTUITY Elite valve's hemodynamic performance.

OBJECTIVE: Rapid deployment surgical aortic valve replacement has emerged as an alternative to the contemporary sutured valve technique. A difference in transvalvular pressure has been observed clinically between RD-SAVR and contemporary SAVR. A mechanistic inquiry into the impact of the rapid deployment valve inflow frame design on the left ventricular outflow tract and valve hemodynamics is needed. METHODS: A 23 mm EDWARDS INTUITY Elite rapid deployment valve and a control contemporary, sutured valve, a 23 mm Magna Ease valve, were implanted in an explanted human heart by an experienced cardiac surgeon. Per convention, the rapid deployment valve was implanted with three non-pledgeted, simple guiding sutures, while fifteen pledgeted, mattress sutures were used to implant the contemporary surgical valve. In vitro flow models were created from micro-computed tomography scans of the implanted valves and surrounding cardiac anatomy. Particle image velocimetry and hydrodynamic characterization experiments were conducted in the vicinity of the valves in a validated pulsatile flow loop system. RESULTS: The rapid deployment and control valves were found to have mean transvalvular pressure gradients of 7.92 ± 0.37 and 10.13 ± 0.48 mmHg, respectively. The inflow frame of the rapid deployment valve formed a larger, more circular, left ventricular outflow tract compared to the control valve. Furthermore, it was found that the presence of the control valve's sub-annular pledgets compromised its velocity distribution and consequently its pressure gradient. CONCLUSIONS: The rapid deployment valve's intra-annular inflow frame provides for a larger, left ventricular outflow tract, thus reducing the transvalvular pressure gradient and improving overall hemodynamic performance.

Three-dimensional extent of flow stagnation in transcatheter heart valves.

The recent unexpected discovery of thrombosis in transcatheter heart valves (THVs) has led to increased concerns of long-term valve durability. Based on the clinical evidence combined with Virchow's triad, the primary hypothesis is that low-velocity blood flow around the valve could be a primary cause for thrombosis. However, due to limited optical access in such unsteady three-dimensional biomedical flows, measurements are challenging. In this study, for the first time, we employ a novel single camera volumetric velocimetry technique to investigate unsteady three-dimensional cardiovascular flows. Validation of the novel volumetric velocimetry technique with standard planar particle image velocimetry (PIV) technique demonstrated the feasibility of adopting this new technique to investigate biomedical flows. This technique was used to quantify the three-dimensional velocity field in the vicinity of a validated, custom developed, transparent THV in a bench-top pulsatile flow loop. Large volumetric regions of flow stagnation were observed in the neo-sinus throughout the cardiac cycle, with stagnation defined as a velocity magnitude lower than 0.05 m s-1. The volumetric scalar viscous shear stress quantified via the three-dimensional shear stress tensor was within the range of low shear-inducing thrombosis observed in the literature. Such high-fidelity volumetric quantitative data and novel imaging techniques used to obtain it will enable fundamental investigation of heart valve thrombosis in addition to providing a reliable and robust database for validation of computational tools.

The Peak Index: Spirometry Metric for Airflow Obstruction Severity and Heterogeneity.

Rationale: Chronic obstructive pulmonary disease (COPD) is characterized by airflow limitation. Spirometry loops are not smooth curves and have undulations and peaks that likely reflect heterogeneity of airflow.Objectives: To assess whether the Peak Index, the number of peaks adjusted for lung size, is associated with clinical outcomes.Methods: We analyzed spirometry data of 9,584 participants enrolled in the COPDGene study and counted the number of peaks in the descending part of the expiratory flow-volume curve from the peak expiratory flow to end-expiration. We adjusted the peaks count for the volume of the lungs from peak expiratory flow to end-expiration to derive the Peak Index. Multivariable regression analyses were performed to test associations between the Peak Index and lung function, respiratory morbidity, structural lung disease on computed tomography (CT), forced expiratory volume in 1 second (FEV1) decline, and mortality.Results: The Peak Index progressively increased from Global Initiative for Chronic Obstructive Lung Disease stage 0 through 4 (P < 0.001). On multivariable analysis, the Peak Index was significantly associated with CT emphysema (adjusted ß = 0.906; 95% confidence interval [CI], 0.789 to 1.023; P < 0.001) and small airways disease (adjusted ß = 1.367; 95% CI, 1.188 to 1.545; P < 0.001), St. George's Respiratory Questionnaire score (adjusted ß = 1.075; 95% CI, 0.807 to 1.342; P < 0.001), 6-minute-walk distance (adjusted ß = -1.993; 95% CI, -3.481 to -0.506; P < 0.001), and FEV1 change over time (adjusted ß = -1.604; 95% CI, -2.691 to -0.516; P = 0.004), after adjustment for age, sex, race, body mass index, current smoking status, pack-years of smoking, and FEV1. The Peak Index was also associated with the BODE (body mass index, airflow obstruction, dyspnea, and exercise capacity) index and mortality (P < 0.001).Conclusions: The Peak Index is a spirometry metric that is associated with CT measures of lung disease, respiratory morbidity, lung function decline, and mortality.Clinical trial registered with www.clinicaltrials.gov (NCT00608764).

Experimental Assessment of Flow Fields Associated with Heart Valve Prostheses Using Particle Image Velocimetry (PIV): Recommendations for Best Practices.

Experimental flow field characterization is a critical component of the assessment of the hemolytic and thrombogenic potential of heart valve substitutes, thus it is important to identify best practices for these experimental techniques. This paper presents a brief review of commonly used flow assessment techniques such as Particle image velocimetry (PIV), Laser doppler velocimetry, and Phase contrast magnetic resonance imaging and a comparison of these methodologies. In particular, recommendations for setting up planar PIV experiments such as recommended imaging instrumentation, acquisition and data processing are discussed in the context of heart valve flows. Multiple metrics such as residence time, local velocity and shear stress that have been identified in the literature as being relevant to hemolysis and thrombosis in heart valves are discussed. Additionally, a framework for uncertainty analysis and data reporting for PIV studies of heart valves is presented in this paper. It is anticipated that this paper will provide useful information for heart valve device manufacturers and researchers to assess heart valve flow fields for the potential for hemolysis and thrombosis.

Valve mediated hemodynamics and their association with distal ascending aortic diameter in bicuspid aortic valve subjects.

PURPOSE: Valve mediated hemodynamics have been postulated to contribute to pathology of the ascending aorta (AAo). The objective of this study is to assess the association of aortic valve morphology and hemodynamics with downstream AAo size in subjects with bicuspid aortic valve (BAV) disease. MATERIALS AND METHODS: Four-dimensional flow MRI at 1.5 or 3 Tesla was used to evaluate the hemodynamics in the proximal AAo of 52 subjects: size-matched controls with tricuspid aortic valves (n = 24, mid ascending aorta [MAA] diameter = 38.0 ± 4.9 mm) and BAV patients with aortic dilatation (n = 14 right and left coronary leaflet fusion [RL]-BAV, MAA diameter = 38.1 ± 5.3 mm; n = 14 right and noncoronary leaflet fusion [RN]-BAV, MAA diameter = 36.5 ± 6.6 mm). A validated semi-automated technique was used to evaluate hemodynamic metrics (flow angle, flow displacement, and jet quadrant) and valve morphology (orifice circularity) for all subjects. Regression analysis of these metrics to AAo diameter was performed. RESULTS: RN-BAV subjects displayed a stronger correlation between hemodynamic metrics in the proximal AAo with diameter in the distal AAo compared with size-matched tricuspid aortic valve (TAV) controls and RL-BAV subjects. The distal AAo diameter was found to be strongly correlated to the upstream flow displacement (R2adjusted = 0.75) and flow angle (R2adjusted = 0.66) measured at the sino-tubular junction (STJ). Orifice circularity was also strongly correlated (R2adjusted = 0.53) to the distal AAo diameter in RN-BAV subjects. For TAV controls and RL-BAV subjects, correlations were weaker (R2adjusted < 0.2). CONCLUSION: Hemodynamics in the STJ were strongly correlated to the distal AAo diameter for the RN-BAV subjects. Hemodynamic metrics were more strongly correlated to the downstream aortic size when compared with valve morphology metrics. LEVEL OF EVIDENCE: 3 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018;47:246-254.

Using a Novel In Vitro Fontan Model and Condition-Specific Real-Time MRI Data to Examine Hemodynamic Effects of Respiration and Exercise.

Several studies exist modeling the Fontan connection to understand its hemodynamic ties to patient outcomes (Chopski in: Experimental and Computational Assessment of Mechanical Circulatory Assistance of a Patient-Specific Fontan Vessel Configuration. Dissertation, 2013; Khiabani et al. in J Biomech 45:2376-2381, 2012; Taylor and Figueroa in Annu Rev Biomed 11:109-134, 2009; Vukicevic et al. in ASAIO J 59:253-260, 2013). The most patient-accurate of these studies include flexible, patient-specific total cavopulmonary connections. This study improves Fontan hemodynamic modeling by validating Fontan model flexibility against a patient-specific bulk compliance value, and employing real-time phase contrast magnetic resonance flow data. The improved model was employed to acquire velocity field information under breath-held, free-breathing, and exercise conditions to investigate the effect of these conditions on clinically important Fontan hemodynamic metrics including power loss and viscous dissipation rate. The velocity data, obtained by stereoscopic particle image velocimetry, was visualized for qualitative three-dimensional flow field comparisons between the conditions. Key hemodynamic metrics were calculated from the velocity data and used to quantitatively compare the flow conditions. The data shows a multi-factorial and extremely patient-specific nature to Fontan hemodynamics.

The Fluid Mechanics of Transcatheter Heart Valve Leaflet Thrombosis in the Neosinus.

BACKGROUND: Transcatheter heart valve (THV) thrombosis has been increasingly reported. In these studies, thrombus quantification has been based on a 2-dimensional assessment of a 3-dimensional phenomenon. METHODS: Postprocedural, 4-dimensional, volume-rendered CT data of patients with CoreValve, Evolut R, and SAPIEN 3 transcatheter aortic valve replacement enrolled in the RESOLVE study (Assessment of Transcatheter and Surgical Aortic Bioprosthetic Valve Dysfunction With Multimodality Imaging and Its Treatment with Anticoagulation) were included in this analysis. Patients on anticoagulation were excluded. SAPIEN 3 and CoreValve/Evolut R patients with and without hypoattenuated leaflet thickening were included to study differences between groups. Patients were classified as having THV thrombosis if there was any evidence of hypoattenuated leaflet thickening. Anatomic and THV deployment geometries were analyzed, and thrombus volumes were computed through manual 3-dimensional reconstruction. We aimed to identify and evaluate risk factors that contribute to THV thrombosis through the combination of retrospective clinical data analysis and in vitro imaging in the space between the native and THV leaflets (neosinus). RESULTS: SAPIEN 3 valves with leaflet thrombosis were on average 10% further expanded (by diameter) than those without (95.5±5.2% versus 85.4±3.9%; P<0.001). However, this relationship was not evident with the CoreValve/Evolut R. In CoreValve/Evolut Rs with thrombosis, the thrombus volume increased linearly with implant depth (R2=0.7, P<0.001). This finding was not seen in the SAPIEN 3. The in vitro analysis showed that a supraannular THV deployment resulted in a nearly 7-fold decrease in stagnation zone size (velocities <0.1 m/s) when compared with an intraannular deployment. In addition, the in vitro model indicated that the size of the stagnation zone increased as cardiac output decreased. CONCLUSIONS: Although transcatheter aortic valve replacement thrombosis is a multifactorial process involving foreign materials, patient-specific blood chemistry, and complex flow patterns, our study indicates that deployed THV geometry may have implications on the occurrence of thrombosis. In addition, a supraannular neosinus may reduce thrombosis risk because of reduced flow stasis. Although additional prospective studies are needed to further develop strategies for minimizing thrombus burden, these results may help identify patients at higher thrombosis risk and aid in the development of next-generation devices with reduced thrombosis risk.

Aortic Regurgitation Generates a Kinematic Obstruction Which Hinders Left Ventricular Filling.

An incompetent aortic valve (AV) results in aortic regurgitation (AR), where retrograde flow of blood into the left ventricle (LV) is observed. In this work, we parametrically characterized the detailed changes in intra-ventricular flow during diastole as a result of AR in a physiological in vitro left-heart simulator (LHS). The loss of energy within the LV as the level of AR increased was also assessed. The validated LHS consisted of an optically-clear, flexible wall LV and a modular AV holder. Two-component, planar, digital particle image velocimetry was used to visualize and quantify intra-ventricular flow. A large coherent vortical structure which engulfed the whole LV was observed under control conditions. In the cases with AR, the regurgitant jet was observed to generate a "kinematic obstruction" between the mitral valve and the LV apex, preventing the trans-mitral jet from generating a coherent vortical structure. The regurgitant jet was also observed to impinge on the inferolateral wall of the LV. Energy dissipation rate (EDR) for no, trace, mild, and moderate AR were found to be 1.15, 2.26, 3.56, and 5.99 W/m3, respectively. This study has, for the first time, performed an in vitro characterization of intra-ventricular flow in the presence of AR. Mechanistically, the formation of a "kinematic obstruction" appears to be the cause of the increased EDR (a metric quantifiable in vivo) during AR. EDR increases non-linearly with AR fraction and could potentially be used as a metric to grade severity of AR and develop clinical interventional timing strategies for patients.

The Effect of Valve-in-Valve Implantation Height on Sinus Flow.

Valve-in-valve transcatheter aortic valve replacement (VIV-TAVR) has proven to be a successful treatment for high risk patients with failing aortic surgical bioprostheses. However, thrombus formation on the leaflets of the valve has emerged as a major issue in such procedures, posing a risk of restenosis, thromboembolism, and reduced durability. In this work we attempted to understand the effect of deployment position of the transcatheter heart valve (THV) on the spatio-temporal flow field within the sinus in VIV-TAVR. Experiments were performed in an in vitro pulsatile left heart simulator using high-speed Particle Image Velocimetry (PIV) to measure the flow field in the sinus region. The time-resolved velocity data was used to understand the qualitative and quantitative flow patterns. In addition, a particle tracking technique was used to evaluate relative thrombosis risk via sinus washout. The velocity data demonstrate that implantation position directly affects sinus flow patterns, leading to increased flow stagnation with increasing deployment height. The particle tracking simulations showed that implantation position directly affected washout time, with the highest implantation resulting in the least washout. These results clearly demonstrate the flow pattern and flow stagnation in the sinus is sensitive to THV position. It is, therefore, important for the interventional cardiologist and cardiac surgeon to consider how deployment position could impact flow stagnation during VIV-TAVR.

On the Mechanics of Transcatheter Aortic Valve Replacement.

Transcatheter aortic valves (TAVs) represent the latest advances in prosthetic heart valve technology. TAVs are truly transformational as they bring the benefit of heart valve replacement to patients that would otherwise not be operated on. Nevertheless, like any new device technology, the high expectations are dampened with growing concerns arising from frequent complications that develop in patients, indicating that the technology is far from being mature. Some of the most common complications that plague current TAV devices include malpositioning, crimp-induced leaflet damage, paravalvular leak, thrombosis, conduction abnormalities and prosthesis-patient mismatch. In this article, we provide an in-depth review of the current state-of-the-art pertaining the mechanics of TAVs while highlighting various studies guiding clinicians, regulatory agencies, and next-generation device designers.

Valve Type, Size, and Deployment Location Affect Hemodynamics in an In Vitro Valve-in-Valve Model.

OBJECTIVES: The purpose of this study was to optimize hemodynamic performance of valve-in-valve (VIV) according to transcatheter heart valve (THV) type (balloon vs. self-expandable), size, and deployment positions in an in vitro model. BACKGROUND: VIV transcatheter aortic valve replacement is increasingly used for the treatment of patients with a failing surgical bioprosthesis. However, there is a paucity in understanding the THV hemodynamic performance in this setting. METHODS: VIV transcatheter aortic valve replacement was simulated in a physiologic left heart simulator by deploying a 23-mm SAPIEN, 23-mm CoreValve, and 26-mm CoreValve within a 23-mm Edwards PERIMOUNT surgical bioprosthesis. Each THV was deployed into 5 different positions: normal (inflow of THV was juxtaposed with inflow of surgical bioprosthesis), -3 and -6 mm subannular, and +3 and +6 mm supra-annular. At a heart rate of 70 bpm and cardiac output of 5.0 l/min, mean transvalvular pressure gradients (TVPG), regurgitant fraction (RF), effective orifice area, pinwheeling index, and pullout forces were evaluated and compared between THVs. RESULTS: Although all THV deployments resulted in hemodynamics that would have been consistent with Valve Academic Research Consortium-2 procedure success, we found significant differences between THV type, size, and deployment position. For a SAPIEN valve, hemodynamic performance improved with a supra-annular deployment, with the best performance observed at +6 mm. Compared with a normal position, +6 mm resulted in lower TVPG (9.31 ± 0.22 mm Hg vs. 11.66 ± 0.22 mm Hg; p < 0.01), RF (0.95 ± 0.60% vs. 1.27 ± 0.66%; p < 0.01), and PI (1.23 ± 0.22% vs. 3.46 ± 0.18%; p < 0.01), and higher effective orifice area (1.51 ± 0.08 cm(2) vs. 1.35 ± 0.02 cm(2); p < 0.01) at the cost of lower pullout forces (5.54 ± 0.20 N vs. 7.09 ± 0.49 N; p < 0.01). For both CoreValve sizes, optimal deployment was observed at the normal position. The 26-mm CoreValve, when compared with the 23-mm CoreValve and 23-mm SAPIEN, had a lower TVPG (7.76 ± 0.14 mm Hg vs. 10.27 ± 0.18 mm Hg vs. 9.31 ± 0.22 mm Hg; p < 0.01) and higher effective orifice area (1.66 ± 0.05 cm(2) vs. 1.44 ± 0.05 cm(2) vs. 1.51 ± 0.08 cm(2); p < 0.01), RF (4.79 ± 0.67% vs. 1.98 ± 0.36% vs. 0.95 ± 1.68%; p < 0.01), PI (29.13 ± 0.22% vs. 6.57 ± 0.14% vs. 1.23 ± 0.22%; p < 0.01), and pullout forces (10.65 ± 0.66 N vs. 5.35 ± 0.18 N vs. 5.54 ± 0.20 N; p < 0.01). CONCLUSIONS: The optimal deployment location for VIV in a 23 PERIMOUNT surgical bioprosthesis was at a +6 mm supra-annular position for a 23-mm SAPIEN valve and at the normal position for both the 23-mm and 26-mm CoreValves. The 26-mm CoreValve had lower gradients, but higher RF and PI than the 23-mm CoreValve and the 23-mm SAPIEN. In their optimal positions, all valves resulted in hemodynamics consistent with the definitions of Valve Academic Research Consortium-2 procedural success. Long-term studies are needed to understand the clinical impact of these hemodynamic performance differences in patients who undergo VIV transcatheter aortic valve replacement.

The hemodynamic effects of acute aortic regurgitation into a stiffened left ventricle resulting from chronic aortic stenosis.

Acute aortic regurgitation (AR) post-chronic aortic stenosis is a prevalent phenomenon occurring in patients who undergo transcatheter aortic valve replacement (TAVR) surgery. The objective of this work was to characterize the effects of left ventricular diastolic stiffness (LVDS) and AR severity on LV performance. Three LVDS models were inserted into a physiological left heart simulator. AR severity was parametrically varied through four levels (ranging from trace to moderate) and compared with a competent aortic valve. Hemodynamic metrics such as average diastolic pressures (DP) and reduction in transmitral flow were measured. AR index was calculated as a function of AR severity and LVDS, and the work required to make up for lost volume due to AR was estimated. In the presence of trace AR, higher LVDS had up to a threefold reduction in transmitral flow (13% compared with 3.5%) and a significant increase in DP (2-fold). The AR index ranged from ∼42 to 16 (no AR to moderate AR), with stiffer LVs having lower values. To compensate for lost volume due to AR, the low, medium, and high LVDS models were found to require 5.1, 5.5, and 6.6 times more work, respectively. This work shows that the LVDS has a significant effect on the LV performance in the presence of AR. Therefore, the LVDS of potential TAVR patients should be assessed to gain an initial indication of their ability to tolerate post-procedural AR.