Clarification of the Supercooling and Heat Storage Efficiency Calculation Formula for Shape-Stabilized Phase Change Materials.

It is essential to determine the heat storage efficiency of shape-stabilized phase change materials (ss-PCMs). In two published articles, the formula for heat storage efficiency is presented using two distinct equations. Using the two equations, the calculated values for heat storage efficiency revealed significant discrepancies. The outcomes cannot be compared. The evaluation of heat storage efficiency has a substantial impact on the practical application of PCMs and serves as a performance benchmark for the PCM samples that have been tested. In this paper, the correct equations for calculating the efficiency of heat storage are presented. Furthermore, it is essential to note that the methods used to calculate the supercooling value are not straightforward. Consequently, this paper clarified the correct formula and/or method for determining the supercooling value and heat storage efficiency of ss-PCMs.

Stem Cell Transplantation Therapy and Neurological Disorders: Current Status and Future Perspectives.

Neurodegenerative diseases are a global health issue with inadequate therapeutic options and an inability to restore the damaged nervous system. With advances in technology, health scientists continue to identify new approaches to the treatment of neurodegenerative diseases. Lost or injured neurons and glial cells can lead to the development of several neurological diseases, including Parkinson's disease, stroke, and multiple sclerosis. In recent years, neurons and glial cells have successfully been generated from stem cells in the laboratory utilizing cell culture technologies, fueling efforts to develop stem cell-based transplantation therapies for human patients. When a stem cell divides, each new cell has the potential to either remain a stem cell or differentiate into a germ cell with specialized characteristics, such as muscle cells, red blood cells, or brain cells. Although several obstacles remain before stem cells can be used for clinical applications, including some potential disadvantages that must be overcome, this cellular development represents a potential pathway through which patients may eventually achieve the ability to live more normal lives. In this review, we summarize the stem cell-based therapies that have been explored for various neurological disorders, discuss the potential advantages and drawbacks of these therapies, and examine future directions for this field.

Efficient Capture of Heavy Metal Ions and Arsenic with a CaY-Carbonate Layered Double-Hydroxide Nanosheet.

Nanosheets consisting of two-dimensional (2-D) nanomaterials made up of Ca2+ (Ca), and Y3+ (Y) cations and carbonate [CO3 2-] anions in the interlayer with a uniform thickness and lengths of around 10 µm have been successfully synthesized in a hydrotalcite layer structure, otherwise known as a layered double hydroxide, using a facile hydrothermal method. The resulting CaY-CO3 2- layered double-hydroxide (LDH) materials demonstrate outstanding affinity and selectivity for toxic transition metal ions such as Cr3+, Ni2+, Cu2+, Zn2+, Pb2+, Cd2+, and Hg2+ as well as metalloid As3+. The adsorption of all of the highly toxic metal ions from the aqueous solution was found to be exceptionally rapid and highly selective, with more than 95% removal achieved within 30 min. For AsO3, a strong adsorption potential of 452 mg/g was observed at pH 7.0, which is better than most values previously reported. The distribution coefficient K d values can exceed ∼106 mL/g for Cr3+, Pb2+, and As3+, which are highly toxic. The fabricated materials have excellent chemical stability: they retain their well-defined lamellar shapes even under mildly acidic conditions.

Preparation of a Sustainable Shape-Stabilized Phase Change Material for Thermal Energy Storage Based on Mg2+-Doped CaCO3/PEG Composites.

The properties of polyethylene glycol-6000 (PEG)/MgCaCO3, a low-cost shape-selective phase change material (ss-PCM), make it highly suitable for solar thermal applications. Nanosized porous MgO-doped CaCO3 with Mg molar concentrations of 5%, 10%, and 15% were synthesized using a hydrothermal technique. The prepared MgO-CaCO3 matrices were then impregnated with PEG to obtain PEG/MgCaCO3 as an ss-PCM. Samples identified as PEG-5MgCaCO3 (P-5-MCC), PEG-10MgCaCO3 (P-10-MCC), and PEG-15MgCaCO3 (P-15-MCC) were prepared and studied. Interestingly, P-10-MCC has the smallest particle size together with a good porous structure compared to the other two materials. The results of thermogravimetric analyses and differential scanning calorimetry indicate that the small particle size and porous structure facilitate the impregnation of approximately 69% of the PEG into the 10-MCC matrix. The latent heat and energy storage efficiency of PEG in the P-10-MCC sample are 152.5 J/g and 96.48%, respectively, which are significantly higher than those of comparable materials. Furthermore, in addition to the improvement of the thermal conductivity of the P-10-MCC, its supercooling is also reduced to some extent. The combined mesoporous and macro-porous structure of P-10-MCC is critical to retaining a large amount of PEG within the matrix, resulting in a high latent heat in the operating temperature range of 35-57 °C. The P-10MCC sample also demonstrates a high energy storage capacity (98.59%), high thermal energy storage/release rates, and exceptional shape-stabilized PCM properties.

Cadmium Selenide Quantum Dots for Solar Cell Applications: A Review.

Quantum dot-sensitized solar cells (QDSSCs) are significant energy-producing devices due to their remarkable capability to growing sunshine and produce many electrons/holes pairs, easy manufacturing, and low cost. However, their power conversion efficiency (4%) is usually worse than that of dye-sensitized solar cells (≤12%); this is mainly due to their narrow absorption areas and the charge recombination happening at the quantum dot/electrolyte and Ti O 2 /electrolyte interfaces. Thus, to raise the power conversion efficiency of QDSSC, new counter electrodes, working electrodes, sensitizers, and electrolytes are required. CdSe thin films have shown great potential for use in photodetectors, solar cells, biosensors, light-emitting diodes, and biomedical imaging systems. This article reviews the CdSe nanomaterials that have been recently used in QDSSCs as sensitizers. Their size, design, morphology, and density all noticeably influence the electron injection efficiency and light-harvesting capacity of these devices. A detailed overview of the development of QDSSCs is presented, including their basic principles, the synthesis methods for their CdSe quantum dots, and the device fabrication processes. Finally, the challenges and opportunities of realizing high-performance CdSe QDSSCs are discussed and some future directions are suggested.

Shape-Stabilized Phase Change Materials for Solar Energy Storage: MgO and Mg(OH)2 Mixed with Polyethylene Glycol.

Heat energy storage systems were fabricated with the impregnation method using MgO and Mg(OH)2 as supporting materials and polyethylene glycol (PEG-6000) as the functional phase. MgO and Mg(OH)2 were synthesized from the salt Mg(NO3)·6H2O by performing hydrothermal reactions with various precipitating agents. The precipitating agents were NaOH, KOH, NH3, NH3 with pamoic acid (PA), or (NH4)2CO3. The result shows that the selection of the precipitating agent has a significant impact on the crystallite structure, size, and shape of the final products. Of the precipitating agents tested, only NaOH and NH3 with PA produce single-phase Mg(OH)2 as the as-synthesized product. Pore size distribution analyses revealed that the surfaces of the as-synthesized MgO have a slit-like pore structure with a broad-type pore size distribution, whereas the as-synthesized Mg(OH)2 has a mesoporous structure with a narrow pore size distribution. This structure enhances the latent heat of the phase change material (PCM) as well as super cooling mitigation. The PEG/Mg(OH)2 PCM also exhibits reproducible behavior over a large number of thermal cycles. Both MgO and Mg(OH)2 matrices prevent the leakage of liquid PEG during the phase transition in phase change materials (PCMs). However, MgO/PEG has a low impregnation ratio and efficiency, with a low thermal storage capability. This is due to the large pore diameter, which does not allow MgO to retain a larger amount of PEG. The latent heat values of PEG-1000/PEG-6000 blends with MgO and Mg(OH)2 were also determined with a view to extending the application of the PCMs to energy storage over wider temperature ranges.

Comparative phenotypic and physiological characteristics of spotted leaf 6 (spl6) and brown leaf spot2 (bl2) lesion mimic mutants (LMM) in rice.

Spontaneous necrotic lesions were found in a lesion mimic mutant brown leaf spot 2 (bl2) without pathogenic infection. Small spots in the seedlings appeared at the four leaves stage and gradually grew into a large round and black area with a gray center on the leaf surfaces. Lower growth habit and lower agronomic trait values with reduced stature, tiller, and panicle number, as well as lower yield potential were noted in the mutants relative to the trait values of the wild-type plants. Microscopic analysis revealed that mesophyll chloroplast was severely damaged or absent in the spotted area of the mutant leaves. Total chlorophyll content, hydrogen peroxide level, and catalase activity were increased at up to 45 days after germination and were dropped at 60 d in the mutant leaves. However, the total protein contents were reduced slightly with a growth period of up to 45 days and were increased at 60 days after germination. A gradual increment of the total ascorbic acid contents in the mutants were observed with advanced plant age, but increased until 45 days and dropped comparatively at 60 days in the wild-type leaves. Increased gene transcriptions of OsPDI and OsGPX1 were noted in the spotted leaves as compared to the non-spotted leaves of the mutant and wild-type leaves, whereas transcripts of OsTPX were transcribed at lower levels in the spotted leaves as compared to the non-spotted leaves. The genetic nature of the bl2 mutant indicated that the F(1) plants evidenced the wild-type phenotype and that bl2 was governed by a single recessive gene.