Tailoring Metal-Organic Frameworks and Derived Materials for High-Performance Zinc-Air and Alkaline Batteries.

Developing multifunctional materials from earth-abundant elements is urgently needed to satisfy the demand for sustainable energy. Herein, we demonstrate a facile approach for the preparation of a metal-organic framework (MOF)-derived Fe2O3/C, composited with N-doped reduced graphene oxide (MO-rGO). MO-rGO exhibits excellent bifunctional electrocatalytic activities toward the oxygen evolution reaction (ηj=10 = 273 mV) and the oxygen reduction reaction (half-wave potential = 0.77 V vs reversible hydrogen electrode) with a low ΔEOER-ORR of 0.88 V in alkaline solutions. A Zn-air battery based on the MO-rGO cathode displays a high specific energy of over 903 W h kgZn-1 (∼290 mW h cm-2), an excellent power density of 148 mW cm-2, and an open-circuit voltage of 1.430 V, outperforming the benchmark Pt/C + RuO2 catalyst. We also hydrothermally synthesized a Ni-MOF that was partially transformed into a Ni-Co-layered double hydroxide (MOF-LDH). A MO-rGO||MOF-LDH alkaline battery exhibits a specific energy of 42.6 W h kgtotal mass-1 (106.5 µW h cm-2) and an outstanding specific power of 9.8 kW kgtotal mass-1 (24.5 mW cm-2). This work demonstrates the potential of MOFs and MOF-derived compounds for designing innovative multifunctional materials for catalysis, electrochemical energy storage, and beyond.

Phase-Dependent Energy Storage Performance of the NixSey Polymorphs for Supercapacitor-Battery Hybrid Devices.

Transition-metal chalcogenides have emerged as a promising class of materials for energy storage applications due to their earth abundance, high theoretical capacity, and high electrical conductivity. Herein, we introduce a facile and one-pot electrodeposition method to prepare high-performance nickel selenide NixSey (0.5 ≤ x/y ≤ 1.5) nanostructures (specific capacity = 180.3 mA h g-1 at 1 A g-1). The as-synthesized nickel selenide (NS) nanostructure is however converted to other polymorphs of nickel selenide including orthorhombic NiSe2, trigonal Ni3Se2, hexagonal NiSe, and orthorhombic Ni6Se5 over cycling. Interestingly, NiSe2 and Ni3Se2 polymorphs that display a more metallic character and superior energy storage performance are the predominant phases after a few hundred cycles. We fabricated a hybrid device using activated carbon (AC) as a supercapacitor-type negative electrode and NS as a high-rate battery-type positive electrode (AC||NS). This hybrid device provides a high specific energy of 71 W h kg-1, an excellent specific power of up to 31 400 W kg-1, and exceptional cycling stability (80% retention of the initial capacity after 20 000 cycles). The higher energy storage performance of the device is a result of the development of high-performance NiSe2 and Ni3Se2 polymorphs. Moreover, the reduction of the critical dimension of the NS particles to the nanoscale partially induces an extrinsic pseudocapacitive behavior that improves the rate capability and durability of the device. We also explored the origin of the superior energy storage performance of the NS polymorphs using density functional theory calculations in terms of the computed density of states around the Fermi level, electrical conductivity, and quantum capacitance that follows the trend NiSe2 > Ni3Se2 > NiSe > Ni6Se5. The present study thus provides an appealing approach for tailoring the phase composition of NS as an alternative to the commonly used templated synthesis methods.

Trilayer Metal-Organic Frameworks as Multifunctional Electrocatalysts for Energy Conversion and Storage Applications.

The need for enhanced energy storage and improved catalysts has led researchers to explore advanced functional materials for sustainable energy production and storage. Herein, we demonstrate a reductive electrosynthesis approach to prepare a layer-by-layer (LbL) assembled trimetallic Fe-Co-Ni metal-organic framework (MOF) in which the metal cations within each layer or at the interface of the two layers are linked to one another by bridging 2-amino-1,4-benzenedicarboxylic acid linkers. Tailoring catalytically active sites in an LbL fashion affords a highly porous material that exhibits excellent trifunctional electrocatalytic activities toward the hydrogen evolution reaction (ηj=10 = 116 mV), oxygen evolution reaction (ηj=10 = 254 mV), as well as oxygen reduction reaction (half-wave potential = 0.75 V vs reference hydrogen electrode) in alkaline solutions. The dispersion-corrected density functional theory calculations suggest that the prominent catalytic activity of the LbL MOF toward the HER, OER, and ORR is due to the initial negative adsorption energy of water on the metal nodes and the elongated O-H bond length of the H2O molecule. The Fe-Co-Ni MOF-based Zn-air battery exhibits a remarkable energy storage performance and excellent cycling stability of over 700 cycles that outperform the commercial noble metal benchmarks. When assembled in an asymmetric device configuration, the activated carbon||Fe-Co-Ni MOF supercapacitor provides a superb specific energy and a power of up to 56.2 W h kg-1 and 42.2 kW kg-1, respectively. This work offers not only a novel approach to prepare an LbL assembled multimetallic MOF but also provides a benchmark for a multifunctional electrocatalyst for water splitting and Zn-air batteries.

Polyaniline-Lignin Interpenetrating Network for Supercapacitive Energy Storage.

Because of increasing interest in environmentally benign supercapacitors, earth-abundant biopolymers have found their way into value-added applications. Herein, a promising nanocomposite based on an interpenetrating network of polyaniline and sulfonated lignin (lignosulfonate, LS) is presented. On the basis of an appropriate regulation of the nucleation kinetics and growth behavior via applying a series of rationally designed potential pulse patterns, a uniform PANI-LS film is achieved. On the basis of the fast rate of H+ insertion-deinsertion kinetics, rather than the slow SO42- doping-dedoping process, the PANI-LS nanocomposite delivers specific capacitance of 1200 F g-1 at 1 A g-1 surpassing the best conducting polymer-lignin supercapacitors known. A symmetric PANI-LS||PANI-LS device delivers a high specific energy of 21.2 W h kg-1, an outstanding specific power of 26.0 kW kg-1, along with superb flexibility and excellent cycling stability. Thus, combining charge storage attributes of polyaniline and lignosulfonate enables a waste-to-wealth approach to improve the supercapacitive performance of polyaniline.

Exploration of Advanced Electrode Materials for Approaching High-Performance Nickel-Based Superbatteries.

The surging interest in high performance, low-cost, and safe energy storage devices has spurred tremendous research efforts in the development of advanced electrode active materials. Herein, the in situ growth of zinc-iron layered double hydroxide (Zn-Fe LDH) on graphene aerogel (GA) substrates through a facile, one-pot hydrothermal method is reported. The strong interaction and efficient electronic coupling between LDH and graphene substantially improve interfacial charge transport properties of the resulting nanocomposite and provide more available redox active sites for faradaic reactions. An LDH-GA||Ni(OH)2 device is also fabricated that results in greatly enhanced specific capacity (187 mAh g-1 at 0.1 A g-1 ), outstanding specific energy (147 Wh kg-1 ), excellent specific power (16.7 kW kg-1 ), along with 88% capacity retention after >10 000 cycles. This approach is further extended to Ni-MH and Ni-Cd batteries to demonstrate the feasibility of compositing with graphene for boosting the energy storage performance of other well-known Ni-based batteries. In contrast to conventional Ni-based batteries, the nearly flat voltage plateau followed by a sloping potential profile of the integrated supercapacitor-battery enables it to be discharged down to 0 V without being damaged. These findings provide new prospects for the design of high-performance and affordable superbatteries based on earth-abundant elements.

Nile Blue Functionalized Graphene Aerogel as a Pseudocapacitive Negative Electrode Material across the Full pH Range.

The pursuit of new negative electrode materials for redox supercapacitors with a high capacitance, boosted energy, and high rate capability is still a tremendous challenge. Herein, we report a Nile Blue conjugated graphene aerogel (NB-GA) as a negative electrode material with excellent pseudocapacitive performance (with specific capacitance of up to 483 F g-1 at 1 A g-1) in all acidic, neutral, and alkaline aqueous electrolytes. The contribution from capacitive charge storage represents 93.4% of the total charge, surpassing the best pseudocapacitors known. To assess the feasibility of NB-GA as a negative electrode material across the full pH range, we fabricated three devices, namely, a symmetric NB-GA||NB-GA device in an acidic (1.0 M H2SO4) electrolyte, an NB-GA||MnO2 device in a pH-neutral (1.0 M Na2SO4) electrolyte, and an NB-GA||LDH (LDH = Ni-Co-Fe layered double hydroxide) device in an alkaline (1.0 M KOH) electrolyte. The NB-GA||NB-GA device exhibits a maximum specific energy of 22.1 Wh kg-1 and a specific power of up to 8.1 kW kg-1; the NB-GA||MnO2 device displays a maximum specific energy of 55.5 Wh kg-1 and a specific power of up to 14.9 kW kg-1, and the NB-GA||LDH device shows a maximum specific energy of 108.5 Wh kg-1 and a specific power of up to 25.1 kW kg-1. All the devices maintain excellent stability over 5000 charge-discharge cycles. The outstanding pseudocapacitive performances of the NB-GA nanocomposites render them a highly promising negative electrode material across the entire pH range.

Towards establishing standard performance metrics for batteries, supercapacitors and beyond.

Over the past decade, electrochemical energy storage (EES) devices have greatly improved, as a wide variety of advanced electrode active materials and new device architectures have been developed. These new materials and devices should be evaluated against clear and rigorous metrics, primarily based on the evidence of real performances. A series of criteria are commonly used to characterize and report performance of EES systems in the literature. However, as advanced EES systems are becoming more and more sophisticated, the methodologies to reliably evaluate the performance of the electrode active materials and EES devices need to be refined to realize the true promise as well as the limitations of these fast-moving technologies, and target areas for further development. In the absence of a commonly accepted core group of metrics, inconsistencies may arise between the values attributed to the materials or devices and their real performances. Herein, we provide an overview of the energy storage devices from conventional capacitors to supercapacitors to hybrid systems and ultimately to batteries. The metrics for evaluation of energy storage systems are described, although the focus is kept on capacitive and hybrid energy storage systems. In addition, we discuss the challenges that still need to be addressed for establishing more sophisticated criteria for evaluating EES systems. We hope this effort will foster ongoing dialog and promote greater understanding of these metrics to develop an international protocol for accurate assessment of EES systems.

Designing 3D highly ordered nanoporous CuO electrodes for high-performance asymmetric supercapacitors.

The increasing demand for energy has triggered tremendous research efforts for the development of lightweight and durable energy storage devices. Herein, we report a simple, yet effective, strategy for high-performance supercapacitors by building three-dimensional pseudocapacitive CuO frameworks with highly ordered and interconnected bimodal nanopores, nanosized walls (∼4 nm) and large specific surface area of 149 m(2) g(-1). This interesting electrode structure plays a key role in providing facilitated ion transport, short ion and electron diffusion pathways and more active sites for electrochemical reactions. This electrode demonstrates excellent electrochemical performance with a specific capacitance of 431 F g(-1) (1.51 F cm(-2)) at 3.5 mA cm(-2) and retains over 70% of this capacitance when operated at an ultrafast rate of 70 mA cm(-2). When this highly ordered CuO electrode is assembled in an asymmetric cell with an activated carbon electrode, the as-fabricated device demonstrates remarkable performance with an energy density of 19.7 W h kg(-1), power density of 7 kW kg(-1), and excellent cycle life. This work presents a new platform for high-performance asymmetric supercapacitors for the next generation of portable electronics and electric vehicles.

Facile synthesis of nanostructured CuCo2O4 as a novel electrode material for high-rate supercapacitors.

CuCo2O4 nanostructures were synthesized through a facile solution combustion method. Electrochemical investigations demonstrate a novel electrode material for supercapacitors with remarkable performance including high-rate capability, high-power density (22.11 kW kg(-1)) and desirable cycling stability at different current densities.