Electronic Configuration Tuning of Centrally Extended Non-Fullerene Acceptors Enabling Organic Solar Cells with Efficiency Approaching 19 .

In the molecular optimizations of non-fullerene acceptors (NFAs), extending the central core can tune the energy levels, reduce nonradiative energy loss, enhance the intramolecular (donor-acceptor and acceptor-acceptor) packing, facilitate the charge transport, and improve device performance. In this study, a new strategy was employed to synthesize acceptors featuring conjugation-extended electron-deficient cores. Among these, the acceptor CH-BBQ, embedded with benzobisthiadiazole, exhibited an optimal fibrillar network morphology, enhanced crystallinity, and improved charge generation/transport in blend films, leading to a power conversion efficiency of 18.94 % for CH-BBQ-based ternary organic solar cells (OSCs; 18.19 % for binary OSCs) owing to its delicate structure design and electronic configuration tuning. Both experimental and theoretical approaches were used to systematically investigate the influence of the central electron-deficient core on the properties of the acceptor and device performance. The electron-deficient core modulation paves a new pathway in the molecular engineering of NFAs, propelling relevant research forward.

A rare case of brominated small molecule acceptors for high-efficiency organic solar cells.

Given that bromine possesses similar properties but extra merits of easily synthesizing and polarizing comparing to homomorphic fluorine and chlorine, it is quite surprising very rare high-performance brominated small molecule acceptors have been reported. This may be caused by undesirable film morphologies stemming from relatively larger steric hindrance and excessive crystallinity of bromides. To maximize the advantages of bromides while circumventing weaknesses, three acceptors (CH20, CH21 and CH22) are constructed with stepwise brominating on central units rather than conventional end groups, thus enhancing intermolecular packing, crystallinity and dielectric constant of them without damaging the favorable intermolecular packing through end groups. Consequently, PM6:CH22-based binary organic solar cells render the highest efficiency of 19.06% for brominated acceptors, more excitingly, a record-breaking efficiency of 15.70% when further thickening active layers to ~500 nm. By exhibiting such a rare high-performance brominated acceptor, our work highlights the great potential for achieving record-breaking organic solar cells through delicately brominating.

Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and Its Bromo Derivatives: Molecular Structure and Reactivity.

Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) (isoBBT) is a new electron-withdrawing building block that can be used to obtain potentially interesting compounds for the synthesis of OLEDs and organic solar cells components. The electronic structure and delocalization in benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), and 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) were studied using X-ray diffraction analysis and ab initio calculations by EDDB and GIMIC methods and were compared to the corresponding properties of benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazole (BBT). Calculations at a high level of theory showed that the electron affinity, which determines electron deficiency, of isoBBT was significantly smaller than that of BBT (1.09 vs. 1.90 eV). Incorporation of bromine atoms improves the electrical deficiency of bromobenzo-bis-thiadiazoles nearly without affecting aromaticity, which increases the reactivity of these compounds in aromatic nucleophilic substitution reactions and, on the other hand, does not reduce the ability to undergo cross-coupling reactions. 4-Bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) is an attractive object for the synthesis of monosubstituted isoBBT compounds. The goal to find conditions for the selective substitution of hydrogen or bromine atoms at position 4 in order to obtain compounds containing a (het)aryl group in this position and to use the remaining unsubstituted hydrogen or bromine atoms to obtain unsymmetrically substituted isoBBT derivatives, potentially interesting compounds for organic photovoltaic components, was not set before. Nucleophilic aromatic and cross-coupling reactions, along with palladium-catalyzed C-H direct arylation reactions for 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), were studied and selective conditions for the synthesis of monoarylated derivatives were found. The observed features of the structure and reactivity of isoBBT derivatives may be useful for building organic semiconductor-based devices.

Palladium-Catalyzed Direct (Het)arylation Reactions of Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole and 4,8-Dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole).

Palladium-catalyzed direct (het)arylation reactions of strongly electron-withdrawing tricyclic benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and its 4,8-dibromo derivative were studied; the conditions for the selective formation of mono- and bis-aryl derivatives were found. The reaction of 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) with thiophenes in the presence of palladium acetate as a catalyst and potassium pivalate as a base, depending on the conditions used, selectively gave both mono- and bis-thienylated benzo-bis-thiadiazoles in low to moderate yields; arenes were found to be inactive in these reactions. It was discovered that direct C-H arylation of benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole with bromo(iodo)arenes and -thiophenes in the presence of Pd(OAc)2 and di-tert-butyl(methyl)phosphonium tetrafluoroborate salt is a powerful tool for the selective formation of 4-mono- and 4,8-di(het)arylated benzo-bis-thiadiazoles. Oxidative double C-H hetarylation of benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole with thiophenes in the presence of Pd(OAc)2 and silver (I) oxide in DMSO was successfully employed to prepare bis-thienylbenzo-bis-thiadiazoles in moderate yields.

Efficient Synthesis of 4,8-Dibromo Derivative of Strong Electron-Deficient Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and Its SNAr and Cross-Coupling Reactions.

An efficient synthesis of hydrolytically and thermally stable 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) by the bromination of its parent heterocycle is reported. The structure of 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) was confirmed by X-ray analysis. The conditions for the selective aromatic nucleophilic substitution of one bromine atom in this heterocyclic system by nitrogen nucleophiles are found, whereas thiols formed the bis-derivatives only. Suzuki-Miyaura cross-coupling reactions were found to be an effective method for the selective formation of various mono- and di(het)arylated derivatives of strong electron-deficient benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), and Stille coupling can be employed for the preparation of bis-arylated heterocycles, which can be considered as useful building blocks for the synthesis of DSSCs and OLEDs components.

New Cycloadditon Reaction of 2-Chloroprop-2-enethioamides with Dialkyl Acetylenedicarboxylates: Synthesis of Dialkyl 2-[4,5-bis(alkoxycarbonyl)-2-(aryl{alkyl}imino)-3(2H)-thienylidene]-1,3-dithiole-4,5-dicarboxylates.

The 1,3-dipolar cycloaddition of 1,2-dithiole-3-thiones with alkynes to form 1,3-dithioles is one of the most studied reactions in this class of polysulfur-containing heterocycles. Nucleophilic substitution of chlorine atoms in dimethyl 2-(1,2-dichloro-2-thioxoethylidene)-1,3-dithiole-4,5-dicarboxylate, which was obtained by addition one molecules of DMAD to 4,5-dichloro-3H-1,2-dithiole-3-thione, led to a series of 2-chloro-2-(1,3-dithiol-2-ylidene)ethanethioamides. Cycloaddition reaction of 2-chloro-2-(1,3-dithiol-2-ylidene)ethanethioamides with activated alkynes led to the unexpected formation of 2-(thiophen-3(2H)-ylidene)-1,3-dithioles via new intermediate, 1-(1,3-dithiol-2-ylidene)-N-phenylethan-1-yliumimidothioate. Structure of dimethyl 2-(4,5-bis(methoxycarbonyl)-2-(phenylimino)thiophen-3(2H)-ylidene)-1,3-dithiole-4,5-dicarboxylate was finally proven by single crystal X-ray diffraction study. Optimized reaction conditions and a mechanistic rationale for the 1,3-dipolar cycloaddition of novel intermediate are presented.

Novel D-A-π-A1 Type Organic Sensitizers from 4,7-Dibromobenzo[d][1,2,3]thiadiazole and Indoline Donors for Dye-Sensitized Solar Cells.

Two novel D-A-π-A1 metal-free organic dyes of the KEA series containing benzo[d][1,2,3]thiadiazole (isoBT) internal acceptor, indoline donors fused with cyclopentane or cyclohexane rings (D), a thiophene as a π-spacer, and a cyanoacrylate as an anchor part were synthesized. Monoarylation of 4,7-dibromobenzo[d][1,2,3]thiadiazole by Suzuki-Miyamura cross-coupling reaction showed that in the case of indoline and carbazole donors, the reaction was non-selective, i.e., two monosubstituted derivatives were isolated in each case, whereas only one mono-isomer was formed with phenyl- and 2-thienylboronic acids. This was explained by the fact that heterocyclic indoline and carbazole fragments are much stronger donor groups compared to thiophene and benzene, as confirmed by cyclic voltammetry measurements and calculation of HOMO energies of indoline, carbazole, thiophene and benzene molecules. The structure of monoaryl(hetaryl) derivatives was strictly proven by NMR spectroscopy and X-ray diffraction. The optical and photovoltaic properties observed for the KEA dyes showed that these compounds are promising for the creation of solar cells. A comparison with symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 showed that the asymmetric nature of benzo[d][1,2,3]thiadiazole KEA dyes leads to a hypsochromic shift of the ICT band in comparison with the corresponding benzo[c][1,2,5]thiadiazole isomers. KEA dyes have a narrow HOMO-LUMO gap of 1.5-1.6 eV. Amongst these dyes, KEA321 recorded the best power efficiency (PCE), i.e., 5.17%, which is superior to the corresponding symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 (5.07 and 4.90%).

Benzothiadiazole vs. iso-Benzothiadiazole: Synthesis, Electrochemical and Optical Properties of D-A-D Conjugated Molecules Based on Them.

This paper presents an improved synthesis of 4,7-dibromobenzo[d][1,2,3]thiadiazole from commercially available reagents. According to quantum-mechanical calculations, benzo[d][1,2,3]thiadiazole (isoBTD) has higher values of ELUMO and energy band gap (Eg), which indicates high electron conductivity, occurring due to the high stability of the molecule in the excited state. We studied the cross-coupling reactions of this dibromide and found that the highest yields of π-spacer-acceptor-π-spacer type compounds were obtained by means of the Stille reaction. Therefore, 6 new structures of this type have been synthesized. A detailed study of the optical and electrochemical properties of the obtained π-spacer-acceptor-π-spacer type compounds in comparison with isomeric structures based on benzo[c][1,2,5]thiadiazole (BTD) showed a red shift of absorption maxima with lower absorptive and luminescent capacity. However, the addition of the 2,2'-bithiophene fragment as a π-spacer resulted in an unexpected increase of the extinction coefficient in the UV/vis spectra along with a blue shift of both absorption maxima for the isoBTD-based compound as compared to the BTD-based compound. Thus, a thorough selection of components in the designing of appropriate compounds with benzo[d][1,2,3]thiadiazole as an internal acceptor can lead to promising photovoltaic materials.

Synthesis and Reactivity of 3H-1,2-dithiole-3-thiones.

3H-1,2-Dithiole-3-thiones are among the best studied classes of polysulfur-containing heterocycles due to the almost explosive recent interest in these compounds as sources of hydrogen sulfide as an endogenously produced gaseous signaling molecule. This review covers the recent developments in the synthesis of these heterocycles, including both well-known procedures and important novel transformations for building the 1,2-dithiole-3-thione ring. Diverse ring transformations of 3H-1,2-dithiole-3-thiones into various heterocyclic systems through 1,3-dipolar cycloaddition, replacement of one or two sulfur atoms to form carbon- and carbon-nitrogen containing moieties, and other unexpected reactions are considered.

Novel D-A-D Fluorescent Dyes Based on 9-(p-Tolyl)-2,3,4,4a,9,9a-hexahydro-1H-carbazole as a Donor Unit for Solution-Processed Organic Light-Emitting-Diodes.

New fluorescent D-A-D dyes containing 9-(p-tolyl)-2,3,4,4a,9,9a-hexahydro-1H-carbazole as a donor unit and 2,1,3-benzochalcogenadiazoles as an electron-withdrawing group were synthesized. The photoluminescent and electroluminescent properties of novel dyes for fluorescent OLED application were investigated. It was demonstrated that the replacement of lightweight heteroatoms by heavier ones enables the fine tuning of the maximum emission without significantly reducing the luminescence quantum yield. The maximum quantum yield value of 62.6% for derivatives based on 2,1,3-benzoxadiazole (1a) in cyclohexane was achieved. Two devices with the architecture of glass/ITO/PEDOT-PSS/poly-TPD/EML/TPBi/LiF/Al (EML = emitting layer) were fabricated to check the suitability of the synthesized compounds as a single active emission layer in OLED. These OLEDs exhibited clear red electroluminescence of the dyes with the maximum current efficiency of 0.85 Cd/A.

Synthesis of 2-((2-(Benzo[d]oxazol-2-yl)-2H-imidazol-4-yl)amino)-phenols from 2-((5H-1,2,3-Dithiazol-5-ylidene)amino)phenols through Unprecedented Formation of Imidazole Ring from Two Methanimino Groups.

A new synthetic pathway to four substituted imidazoles from readily available 2-((4-aryl(thienyl)-5H-1,2,3-dithiazol-5-ylidene)amino)phenols has been developed. Benzo[d]oxazol-2-yl(aryl(thienyl))methanimines were proved as key intermediates in their synthesis. The formation of an imidazole ring from two methanimine derivatives likely includes the opening of one benzoxazole ring followed by ring closure by intermolecular nucleophilic attack of the N-methanimine atom to a carbon atom of another methanimine.

Antimicrobial and Antifungal Activity of Rare Substituted 1,2,3-Thiaselenazoles and Corresponding Matched Pair 1,2,3-Dithiazoles.

We report our investigations into the underlying differences between 1,2,3-dithiazole and their ultra-rare counterpart, 1,2,3-thiaselenazole. This rare 1,2,3-thiaselenazole chemotype was afforded by sulfur extrusion and selenium insertion into the preconstructed 1,2,3-dithiazoles. We built a library of matched paired compounds to compare and contrast the two ring systems. This led to the development of both narrow and broad-spectrum antimicrobial compounds with sub-micro molar potency, limited to no toxicity and a further understanding of the transition state electronics through molecular simulations. We also identified the potent 4,5,6-trichlorocyclopenta[d][1,2,3]thiaselenazole 11a, for use against Candida albicans, Cryptococcus neoformans var. grubii, Staphylococcus aureus and Acinetobacter baumannii, all of which have limited clinical treatment options. The 1,2,3-thiaselenazole represents a new class of potential compounds for the treatment of a host of multi-resistant hospital derived infections.

Synthesis and Identification of Pentathiepin-Based Inhibitors of Sporothrix brasiliensis.

Sporothrix brasiliensis is the causative agent of zoonotic sporotrichosis in Brazil and is currently referred to as the most virulent species among those of clinical importance within the genus. Sporotrichosis is an emergent disease that has come to the forefront over two decades with a recent hot spot of sporotrichosis infection emerging in the state of Rio de Janeiro. The source of these infections is now at epidemic proportions with more than 4000 cases reported in Rio de Janeiro, Brazil, alone since 1998. We developed a focused library of a rare pentathiepin ring system and identified a potent substitution pattern that yielded compounds 21 and 22. These compounds were more potent than itraconazole which is the current standard of care for sporotrichosis.

A novel candle light-style OLED with a record low colour temperature.

The possibility of using a single light-emitting layer consisting of newly synthesized fluorescent small organic molecules of D-A-π-A type incorporated into a conductive matrix together with an electron conductive Alq3 layer in order to form radiation in candle light-style OLEDs was shown for the first time. A record low color temperature of 1722 K OLED radiation was achieved, which is by 80 K lower than that of the best devices reported previously.

Synthesis and comparison of substituted 1,2,3-dithiazole and 1,2,3-thiaselenazole as inhibitors of the feline immunodeficiency virus (FIV) nucleocapsid protein as a model for HIV infection.

We report the first biological evaluation the 1,2,3-thiaselenazole class of compound and utilising a concise synthetic approach of sulfur extrusion, selenium insertion of the 1,2,3-dithiazoles. We created a small diverse library of compounds to contrast the two ring systems. This approach has highlighted new structure activity relationship insights and lead to the development of sub-micro molar anti-viral compounds with reduced toxicity. The 1,2,3-thiaselenazole represents a new class of potential compounds for the treatment of FIV and HIV.

[1,2,5]Thiadiazolo[3,4-d]Pyridazine as an Internal Acceptor in the D-A-π-A Organic Sensitizers for Dye-Sensitized Solar Cells.

Four new D-A-π-A metal-free organic sensitizers for dye-sensitized solar cells (DSSCs), with [1,2,5]thiadiazolo[3 ,4-d]pyridazine as internal acceptor, thiophene unit as π-spacer and cyanoacrylate as anchoring electron acceptor, have been synthesized. The donor moiety was introduced into [1,2,5]thiadiazolo[3,4-d]pyridazine by nucleophilic aromatic substitution and Suzuki cross-coupling reactions, allowing design of D-A-π-A sensitizers with the donor attached to the internal heterocyclic acceptor not only by the carbon atom, as it is in a majority of DSSCs, but by the nitrogen atom also. Although low values of power conversion efficiency (PCE) were found, a few important consequences were identified: (i) poor PCE data can be attributed to high electron deficiency of the internal [1,2,5]thiadiazolo[3,4-d]pyridazine acceptor due to lower light harvesting by the dye; (ii) the manner in which the donor was attached to the internal acceptor (by carbon or nitrogen) did not play an essential role in the photovoltaic properties of the dyes; (iii) dyes based on the novel donor 2,3,4,4a,9,9a-hexahydro-1H-1,4-methanocarbazolyl and 9-(p-tolyl)-2,3,4,4a,9,9a-hexahydro-1H- carbazole moieties showed similar photovoltaic properties to dyes based on the well-known 4-(p-tolyl)-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indolyl building block, which opens the door for further optimization potential of new dye families.

Investigation of the Pentathiepin Functionality as an Inhibitor of Feline Immunodeficiency Virus (FIV) via a Potential Zinc Ejection Mechanism, as a Model for HIV Infection.

A small diverse library of pentathiepin derivatives were prepared to evaluate their efficacy against the nucleocapsid protein function of the feline immunodeficiency virus (FIV) as a model for HIV, using an in vitro cell culture approach. This study led to the development of nanomolar active compounds with low toxicity.

Safe Synthesis of 4,7-Dibromo[1,2,5]thiadiazolo[3,4-d]pyridazine and Its SNAr Reactions.

A safe and efficient synthesis of 4,7-dibromo[1,2,5]thiadiazolo[3,4-d]pyridazine from the commercial diaminomaleonitrile is reported. Conditions for selective aromatic nucleophilic substitution of one or two bromine atoms by oxygen and nitrogen nucleophiles are found, whereas thiols formed the bis-derivatives only. Buchwald-Hartwig or Ullmann techniques are successful for incorporation of a weak nitrogen base, such as carbazole, into the [1,2,5]thiadiazolo[3,4-d]pyridazine core. The formation of rather stable S…η²-(N=N) bound chains in 4,7-bis(alkylthio)-[1,2,5]thiadiazolo[3,4-d]pyridines makes these compounds promising for the design of liquid crystals.

3D molecular network and magnetic ordering, formed by multi-dentate magnetic couplers, bis(benzene)chromium(i) and [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazolidyl.

The reaction between bis(benzene)chromium(0), Cr0(C6H6)2, and [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (abbreviated as TDTD) formed single crystals of the 1 : 1 salt, [CrI(C6H6)2]+[TDTD]-. The crystal structure of [Cr(C6H6)2][TDTD] belongs to the monoclinic P21/c space group, and involves a CdSO4-type network (or quartz dual net), which is formed by CHN hydrogen bonds between [Cr(C6H6)2]+ (S = 1/2) and [TDTD]- (S = 1/2). In addition to this network, the two components form an alternating chain crystal with a π-π overlap along the [110] and [11[combining macron]0] directions. The theoretical calculations for the pairwise intermolecular magnetic exchange interactions in [Cr(C6H6)2][TDTD] reveal the presence of 3D interactions, ranging from an antiferromagnetic interaction of -8.96 cm-1 to a ferromagnetic one of 1.70 cm-1. The temperature dependence of the paramagnetic susceptibility χp indicates the dominance of an antiferromagnetic interaction with a negative Weiss constant of -4.8 K and a magnetic ordering at 8 K, which can be characterized in terms of weak ferromagnetism.

The Conversion of 5,5'-Bi(1,2,3-dithiazolylidenes) into Isothiazolo[5,4-d]isothiazoles.

Thermolysis of 4,4'-dichloro-, 4,4'-diaryl-, and 4,4'-di(thien-2-yl)-5,5'-bi(1,2,3-dithiazol-ylidenes) affords the respective 3,6-dichloro-, 3,6-diaryl- and 3,6-di(thien-2-yl)isothiazolo[5,4-d]-isothiazoles in low to high yields. The transformation of the 4,4'-diaryl- and 4,4'-di(thien-2-yl)-5,5'-bi(1,2,3-dithiazolylidenes) occurs at lower temperatures in the presence of the thiophiles triphenylphosphine or tetraethylammonium iodide. Optimized reaction conditions and a mechanistic rationale for the thiophile-mediated ring transformation are presented.