Difluoroboron Complexes Based on Benzimidazole-Phenolates as Blue Emitters.

Novel four-coordinated boron complexes (1-5) were synthesized via a reaction between BF3·CH3OH and benzimidazole-phenolate ligands (L1-L5), which are N,O-donors. These complexes exhibit intense blue emission in the solution and solid states accompanied by notable fluorescence quantum yields (ΦF). The study of the structure-property relation, through theoretical and experimental approaches, revealed a distinctive trend where compounds incorporating electron-donating substituents (methyl and ethoxy groups) in the phenolate moiety manifest shifts in emission wavelengths across the blue spectrum, concomitant with an increase in ΦF. Furthermore, the incorporation of an aromatic ring into the benzimidazole moiety considerably intensifies the rate of radiative relaxation from excited states. Notably, in the solid phase, either as a crystalline powder or loaded into polymer films, these modified complexes maintain or even surpass ΦF values observed in molecular solutions, ranging from 0.18 to 0.57, depending on the substitution. This characteristic makes these compounds attractive for applications in optoelectronics. All of the compounds were characterized using 1H, 13C, 11B, and 19F NMR, elemental analysis, and the molecular structures were corroborated through single-crystal X-ray diffraction analysis. Computational calculations via time-dependent density functional theory further elucidate the tunability of optical bandgaps through group substitution on ligands, aligning well with experimental observations.

Entangled Two-Photon Absorption in Transmission-Based Experiments: Deleterious Effects from Linear Optical Losses.

Recently different experimental schemes have been proposed to study the elusive phenomenon of entangled two-photon absorption (ETPA) in nonlinear materials. The attempts to detect ETPA using transmission-based schemes have led to results whose validity is currently under debate because the ETPA signal can be corrupted or emulated by artifacts associated with linear optical losses. The present work addresses the issue of linear losses and the corresponding artifacts in transmission-based ETPA experiments through a new approach that exploits the properties of a Hong-Ou-Mandel (HOM) interferogram. Here, we analyze solutions of rhodamine B (RhB), commonly used as a model of a nonlinear medium in ETPA studies. Then, by using the HOM interferometer as a sensing device, we first demonstrate the equivalence of the standard transmission vs pump power ETPA experiments, presented in many reports, with our novel approach of transmission vs two-photon temporal delay. Second, a detailed study of the effects of optical losses, unrelated to ETPA, over the HOM interferogram is carried out by: (1) characterizing RhB in solutions prepared with different solvents and (2) considering scattering losses introduced by silica nanoparticles used as a controlled linear loss mechanism. Our results clearly expose the deleterious effects of linear optical losses over the ETPA signal when standard transmission experiments are employed and show how, by using the HOM interferogram as a sensing device, it is possible to detect the presence of such losses. Finally, once we showed that the HOM interferogram discriminates properly linear losses, our study also reveals that under the specific experimental conditions considered here, which are the same as those employed in many reported works, the ETPA was not unequivocally detected.

Spectral Considerations of Entangled Two-Photon Absorption Effects in Hong-Ou-Mandel Interference Experiments.

Recently, different experimental methods intended to detect the entangled two-photon absorption (ETPA) phenomenon in a variety of materials have been reported. The present work explores a different approach in which the ETPA process is studied based on the changes induced in the visibility of a Hong-Ou-Mandel (HOM) interferogram. By using an organic solution of Rhodamine B as a model of nonlinear material interacting with entangled photons at ∼800 nm region produced by spontaneous parametric down-conversion (SPDC) Type-II, the conditions that make possible to detect changes in the visibility of a HOM interferogram upon ETPA are investigated. We support the discussion of our results by presenting a model in which the sample is considered as a spectral filtering function which fulfills the energy conservation conditions required by ETPA, allowing us to explain the experimental observations with good agreement. We believe that this work represents a new perspective to studying the ETPA interaction, by using an ultrasensitive quantum interference technique and a detailed mathematical model of the process.

Two-photon absorption-based delivery of nitric oxide from ruthenium nitrosyl complexes.

Since the discovery of the numerous physiological roles exhibited by nitric oxide (NO), ruthenium nitrosyl (RuNO) complexes have been regarded as one of the most promising NO donors, stable, well tolerated by the body and capable of releasing NO locally and quantitatively, under light irradiation. This release can be achieved by two-photon absorption (TPA) processes, which allow the irradiation to be performed in the near infrared domain, where light has its maximum depth of penetration in biological tissues. This review provides a short introduction on the biological properties of NO, on RuNO complexes with photo-releasing capabilities, and on the origin of TPA properties in molecules. Then, the RuNO complexes with TPA capabilities are thoroughly discussed either as monometallic or polymetallic species.

Bimetallic Ruthenium Nitrosyl Complexes with Enhanced Two-Photon Absorption Properties for Nitric Oxide Delivery.

One monometallic and three bimetallic ruthenium nitrosyl (RuNO) complexes are presented and fully characterized in reference to a parent monometallic complex of formula [FTRu(bpy)(NO)]3+ , where FT is a fluorenyl-substituted terpyridine ligand, and bpy the 2,2'-bipyridine. These new complexes are built with the new ligands FFT, TFT, TFFT, and TF-CC-TF (where an alkyne C≡C group is inserted between two fluorenes). The crystal structures of the bis-RuNO2 and bis-RuNO complexes built from the TFT ligand are presented. The evolution of the spectroscopic features (intensities and energies) along the series, at one-photon absorption (OPA) correlates well with the TD-DFT computations. A spectacular effect is observed at two-photon absorption (TPA) with a large enhancement of the molecular cross-section (σTPA ), in the bimetallic species. In the best case, σTPA is equal to 1523±98 GM at 700 nm, in the therapeutic window of transparency of biological tissues. All compounds are capable of releasing NO⋅ under irradiation, which leads to promising applications in TPA-based drug delivery.

Two-Photon-Triggered NO Release via a Ruthenium-Nitrosyl Complex with a Star-Shaped Architecture.

We report herein a molecular engineering strategy based on the design of a multipolar ruthenium-nitrosyl (Ru-NO) complex with a three-branched architecture. The three Ru-NO units are introduced at the periphery of a highly π-delocalized truxene core bearing three terpyridine ligands. The two-photon absorption capabilities of the complex were investigated by the Z-scan technique. The strong electronic coupling among the individual arms gives rise to a very strong two-photon absorption response (δ800 nm ∼ 1600 GM), which corresponds to a 16-fold enhancement of the capability of a single-arm reference, thereby promoting an efficient light-driven NO release process in aqueous media.

Characterization of the fluorescence intensity and color tonality in the exoskeleton of scorpions.

Scorpions are a mesodiverse and nocturnal group of arachnids inhabiting most biomes worldwide. Different species of scorpions have divergent adaptations to the substrate they live in, but most of them share an intriguing characteristic: their exoskeleton contains fluorophores that emit blue-greenish fluorescence under ultraviolet radiation. Although there are some reports in the literature on the study of fluorescence in scorpions, the biological functionality of this light emission is currently unknown and is under debate. In this work, the properties of emission from the scorpion's exoskeleton are studied by means of digitally processed photographs taken of living specimens under ultraviolet illumination and complemented with standard spectroscopic measurements of emission and excitation spectra. With the aim of identifying possible correlations between the fluorescence, the characteristics color of the exoskeleton and the biology of the scorpions, 4 families, 9 genera and 24 species were studied. Our results suggest that the intensity of fluorescence is heterogeneous throughout the scorpion's exoskeleton studied here in such a way that pedipalps and metasomal segments fluoresce more intensely than the mesosomal segments. The spectrum of fluorescence across species is practically identical, suggesting that the same fluorophores are present in their exoskeletons. However, the fluorescence intensity emitted by each species varies according to their characteristic color (associated with the exoskeleton optical reflectance). Since the coloration of the exoskeleton is determined by the concentration of melanin and other pigments according to the substrate where scorpions live in, we conclude by suggesting that fluorescence may correlate directly to the ecomorphotype of the scorpions.

Core carbo-mer of an Extended Tetrathiafulvalene: Redox-Controlled Reversible Conversion to a carbo-Benzenic Dication.

carbo-Benzene is an aromatic molecule devised by inserting C2 units within each C-C bond of the benzene molecule. By integrating the corresponding carbo-quinoid core as bridging unit in a π-extended tetrathiafulvalene (exTTF), it is shown that a carbo-benzene ring can be reversibly formed by electrochemical reduction or oxidation. The so-called carbo-exTTF molecule was thus experimentally prepared and studied by UV-visible absorption spectroscopy and cyclic voltammetry, as well as by X-ray crystallography and by scanning tunneling microscopy (STM) on a surface of highly oriented pyrolytic graphite (HOPG). The molecule and its oxidized and reduced forms were subjected to a computational study at the density functional theory (DFT) level, supporting carbo-aromaticity as a driving force for the formation of the dication, radical cation, and radical anion. By allowing co-planarity of the dithiolylidene rings and carbo-quinoidal core, carbo-exTTFs present a promising new class of redox-active systems.

Prominence of fusion temperature and engineering heteroatoms on multifarious emissive shifts in carbon dots.

We present a simple but robust strategy to engineering heteroatoms (N, S) on carbon dots (CDs) surface that results in a collection of enhanced photoluminescence (PL) emissions. The use of citric acid (CA) and 2-Imidazolidinethione (2-IZT) as precursors was envisioned to study the impact of thermolysis process on the PL properties. The proposed strategy, implemented at two different temperatures (180 °C and 200 °C), is suitable to produce CDs with tunable PL and quantum yield (QY) up to ∼32%. Similar to earlier reports of CA-based CDs, the self-assembling of fluorophores integrated into the CDs edge is hypothesized, however, in our CDs a double intriguing effect of blue- and red-shifting can be observed for PL as the wavelength of excitation is increased in the range 280-480 nm. Through a comprehensive characterization and evaluation of these CDs in water suspensions, the mechanisms that lead to PL multifarious emissions are proposed.

Modal interferometer based on a single mechanically induced long-period fiber grating and a nanoparticles-coated film section.

A modal interferometer by a single mechanically induced long-period fiber grating (MI-LPFG) using a half-length coating fiber is presented. The coating material used for this Letter is a film of silica nanoparticles doped with an organic chromophore. The silica nanoparticles, with diameters within the range of 40-50 nm, were deposited over 3.5 cm length of fiber by the dip-coating method, forming a film with a thickness between 500 and 1250 nm. Then the modal interferometer was implemented by inscribing the MI-LPFG over the coated fiber section and a similar fiber length of the uncoated fiber. The experimental results show high-contrast transmission bands, where the position and depth of the absorption envelope band are finely selected by the grating period, the pressure applied, and the film thickness. The novel modal interferometer architecture based on a single MI-LPFG, combined with a functionalized nanoparticles coating film, offers an attractive platform for the development of fiber sensors and other fiber-based devices.

Semiconductor Polymer/Top Electrode Interface Generated by Two Deposition Methods and Its Influence on Organic Solar Cell Performance.

In this Research Article, the effect of two techniques for top-electrode deposition in organic photovoltaics (OPVs) cells with the configuration ITO/PEDOT:PSS/PTB7-Th:PC71BM/PFN/top-electrode is analyzed. One deposition was made by evaporation under high vacuum, meanwhile the other was carried out at normal room atmosphere; for the former, a double layer of Ca and the eutectic alloy Field's metal (FM) was thermally evaporated, while for the latter FM was deposited just by melting and dropping it on top of the delimited active area at temperatures about 90 °C. The average short-circuit photocurrent density, open circuit voltage and fill factor for devices with either Ca/FM (evaporated) or FM (by dripping) cathode, were very similar: around 13.20 mA/cm2, 840 mV, and 0.6, respectively. Average efficiency for devices with the mentioned evaporated cathode was of 6.4% (largest value 7.0%), meanwhile for devices with the cathode deposited by dripping, it was of 6.1% (largest value 6.5%). Morphological analysis, by atomic force microscopy on the surface of a FM electrode, detached from an OPV device, shows inhomogeneities and pinholes in its surface with an average roughness of 16 nm. OPV photocurrent was studied by means of laser beam induced current (LBIC), it showed that OPVs devices with FM top electrode exhibits an inhomogeneous response. An impedance analysis was also carried out and results were correlated with defects observed at the studied interface. In spite of the mentioned deficiencies at FM interface, overall PV performance of devices with this electrode highlights the convenience of using FM because of its easy, fast, and low-cost deposition (vacuum free) characteristics.

Strong Dipolar Effects on an Octupolar Luminiscent Chromophore: Implications on their Linear and Nonlinear Optical Properties.

Design parameters derived from structure-property relationships play a very important role in the development of efficient molecular-based functional materials with optical properties. Here, we report on the linear and nonlinear optical properties of a fluorene-derived dipolar system (DS) and its octupolar analogue (OS), in which donor and acceptor groups are connected by a phenylacetylene linkage, as a strategy to increase the number of delocalized electrons in the π-conjugated system. The optical nonlinear response was analyzed in detail by experimental and theoretical methods, showing that, in the octupolar system OS, the dipolar effects induced a strong two-photon absorption process whose magnitude is as large as 2210 GM at infrared wavelengths. Solvatochromism studies were implemented to obtain further insight on the charge transfer process. We found that the triple bond plays a fundamental role in the linear and nonlinear optical responses. The strong solvatochromism behavior in DS and OS was analyzed by using four empirical solvent scales, namely Lippert-Mataga, Kamlet-Taft, Catalán, and the recently proposed scale of Laurence et al., finding consistent results of strong solvent polarizability and viscosity dependence. Finally, the role of the acceptor groups was further studied by synthesizing the analogous compound 2DS, having no acceptor group.

Silole-Based Red Fluorescent Organic Dots for Bright Two-Photon Fluorescence In vitro Cell and In vivo Blood Vessel Imaging.

Robust luminescent dyes with efficient two-photon fluorescence are highly desirable for biological imaging applications, but those suitable for organic dots fabrication are still rare because of aggregation-caused quenching. In this work, a red fluorescent silole, 2,5-bis[5-(dimesitylboranyl)thiophen-2-yl]-1-methyl-1,3,4-triphenylsilole ((MesB)2 DTTPS), is synthesized and characterized. (MesB)2 DTTPS exhibits enhanced fluorescence efficiency in nanoaggregates, indicative of aggregation-enhanced emission (AEE). The organic dots fabricated by encapsulating (MesB)2 DTTPS within lipid-PEG show red fluorescence peaking at 598 nm and a high fluorescence quantum yield of 32%. Upon excitation at 820 nm, the dots show a large two-photon absorption cross section of 3.43 × 10(5) GM, which yields a two-photon action cross section of 1.09 × 10(5) GM. These (MesB)2 DTTPS dots show good biocompatibility and are successfully applied to one-photon and two-photon fluorescence imaging of MCF-7 cells and two-photon in vivo visualization of the blood vascular of mouse muscle in a high-contrast and noninvasive manner. Moreover, the 3D blood vasculature located at the mouse ear skin with a depth of over 100 µm can also be visualized clearly, providing the spatiotemporal information about the whole blood vascular network.

Light Emission Properties of a Cross-Conjugated Fluorene Polymer: Demonstration of Its Use in Electro-Luminescence and Lasing Devices.

Light emission properties of a fluorene cross-conjugated polymer (PF⁻1) based on the monomer 4,7-bis[2-(9,9-dimethyl)fluorenyl] benzo[1,2,5]thiadiazole are reported. This polymer exhibits solubility at high concentrations, good processability into thin solid films of good quality and a broad emission band with a fluorescence quantum yield of approximately 1. Based on these features, in this paper we implemented the use of PF⁻1 as an active layer in polymer light-emitting diodes (PLEDs) and as a laser gain medium in solution. To get insight on the conducting properties of PF⁻1, two different electron injectors, poly [(9,9-bis(3'-(N,N-dimethylamino) propyl)-2,7-fluorene)-alt-2,7-(9,9⁻dioctylfluorene)] (PFN) and lithium fluoride (LiF), were used in a simple PLED architecture. PLEDs with the PFN film were found to exhibit better performance with a maximum luminous efficiency of 40 cd/A, a turn-on voltage (Von) of approximately 4.5 V and a luminance maximum of 878 cd/m² at 5.5 V, with a current density of 20 A/m². For the lasing properties of PF⁻1, we found a lasing threshold of around 75 µJ and a tunability of 20 nm. These values are comparable with those of rhodamine 6G, a well-known laser dye.

Difluorenyl carbo-Benzenes: Synthesis, Electronic Structure, and Two-Photon Absorption Properties of Hydrocarbon Quadrupolar Chromophores.

The synthesis, crystal and electronic structures, and one- and two-photon absorption properties of two quadrupolar fluorenyl-substituted tetraphenyl carbo-benzenes are described. These all-hydrocarbon chromophores, differing in the nature of the linkers between the fluorenyl substituents and the carbo-benzene core (C-C bonds for 3 a, C-C=C-C expanders for 3 b), exhibit quasi-superimposable one-photon absorption (1PA) spectra but different two-photon absorption (2PA) cross-sections σ2PA. Z-scan measurements (under NIR femtosecond excitation) indeed showed that the C≡C expansion results in an approximately twofold increase in the σ2PA value, from 336 to 656 GM (1 GM = 10(-50) cm(4) s molecule(-1) photon(-1)) at λ = 800 nm. The first excited states of Au and Ag symmetry accounting for 1PA and 2PA, respectively, were calculated at the TDDFT level of theory and used for sum-over-state estimations of σ2PA(λi), in which λi = 2 hc/Ei, h is Planck's constant, c is the speed of light, and Ei is the energy of the 2PA-allowed transition. The calculated σ2PA values of 227 GM at 687 nm for 3 a and 349 GM at 708 nm for 3 b are in agreement with the Z-scan results.

Photophysical Study of Polymer-Based Solar Cells with an Organo-Boron Molecule in the Active Layer.

Our group previously reported the synthesis of four polythiophene derivatives (P1-P4) used for solar cells. The cells were prepared under room conditions by spin coating, leading to low efficiencies. However, after the addition of 6-nitro-3-(E)-3-(4-dimethylaminophenyl)allylidene)-2,3-dihydrobenzo[d]-[1,3,2] oxazaborole (M1) to their active layers, the efficiencies of the cells showed approximately a two-fold improvement. In this paper, we study this enhancement mechanism by performing ultrafast transient absorption (TA) experiments on the active layer of the different cells. Our samples consisted of thin films of a mixture of PC61BM with the polythiophenes derivatives P1-P4. We prepared two versions of each sample, one including the molecule M1 and another without it. The TA data suggests that the efficiency improvement after addition of M1 is due not only to an extended absorption spectrum towards the infrared region causing a larger population of excitons but also to the possible creation of additional channels for transport of excitons and/or electrons to the PC61BM interface.

Two-photon excited fluorescence of silica nanoparticles loaded with a fluorene-based monomer and its cross-conjugated polymer: their application to cell imaging.

In this work the two-photon activity of nanoparticles obtained from a fluorene monomer (M1) and its cross-conjugated polymer (P1) is reported. Aqueous suspensions of M1 and P1 nanoparticles prepared through the reprecipitation method exhibited maximum two-photon absorption (TPA) cross-sections of 84 and 9860 GM (1 GM = 10(-50) cm(4) s) at 740 nm, respectively, and a fluorescence quantum yield of ~1. Such a two-photon activity was practically equal with respect to that for molecular solutions of M1 and P1. These materials were then successfully encapsulated into silica nanoparticles to provide bio-compatibly. A lung cancer cell line (A549) and a human cervical cancer cell line (HeLa cells) were incubated with our fluorescent silica nanoparticles to carry out two-photon imaging. By means of these studies we demonstrate that optimized nonlinear optical polymers loaded in silica nanoparticles can be used as efficient probes with low cytotoxicity and good photostability for two-photon fluorescence microscopy. To the best of our knowledge, studies concerning polymer-doped silica nanoparticles exhibiting large two-photon activity have not been reported in the literature.

Fast and environmentally friendly quantitative analysis of active agents in anti-diabetic tablets by an alternative laser-induced breakdown spectroscopy (LIBS) method and comparison to a validated reversed-phase high-performance liquid chromatography (RP-HPLC) method.

Laser-induced breakdown spectroscopy (LIBS) is evaluated as a potential analytic technique for rapid screening and quality control of anti-diabetic tablets. This paper proposes a simple LIBS-based method for the quantitative analysis of two active pharmaceutical ingredients (APIs): metformin (Met) and glybenclamide (Gly). In order to quantify both APIs, chlorine (Cl) concentration was estimated by employing the Cl/Br optical emission ratio, where Br was introduced as internal standard. Calibration curves were prepared, achieving linearity higher than 99%. On the other hand, for comparison to the proposed method, an isocratic reversed-phase high-performance liquid chromatography (RP-HPLC) method was also developed for quantitative determination of the same analytes by ultraviolet (UV) detection. The chromatographic separation was achieved on a Phenomenex Hypersil C18, 250 mm × 4.6 mm, 5 µm column. The mobile phase was K(2)HPO(4)/H(3)PO(4)-CH(3)OH and flow rate was 1.0 mL min(-1). The method is linear over a range of 10-60 µg mL(-1) for Gly and 5-30 µg mL(-1) for Met and the correlation coefficients were ≥0.99. Recoveries were found to be in the range of 95-101%. Furthermore, four different commercial brands of each active agent were evaluated by both proposed LIBS and chromatographic methods and results were compared with each other. The comparison was satisfactorily validated by analysis of variance (ANOVA).

Stereoselective synthesis, efficient light emission, and high bipolar charge mobility of chiasmatic luminogens.

Stereoregular tetraphenylethene derivatives (Z)-o-BCaPTPE and (Z)-o-BTPATPE featured with chiasmatic conformations and aggregation-enhanced emission characteristics are synthesized using a McMurry reaction. Both luminogens exhibit high hole and electron mobilities. Organic light-emitting diodes (OLEDs) using (Z)-o-BCaPTPE and (Z)-o-BTPATPE as both the light-emitting and electron-transporting layers show high efficiencies.

Structural, thermal and optical characterization of a Schiff base as a new organic material for nonlinear optical crystals and films with reversible noncentrosymmetry.

Macroscopic single crystals of (E)-5-(diethylamino)-2-((3,5-dinitrophenylimino)methyl)phenol (DNP) were obtained from slow cooling of chloroform or dichlorometane saturated solutions at controlled temperature. X-ray diffraction analysis showed that this compound crystallizes in a noncentrosymmetric space group (P2(1)2(1)2(1)). Thermal analysis was performed and indicated that the crystals are stable until 260 °C. Second-order nonlinear optical properties of DNP were experimentally investigated in solution through EFISH technique and in solid state through the Kurtz-Perry powder technique. Crystals of compound DNP exhibited a second-harmonic signals 39 times larger than of the technologically useful potassium dihydrogenphosphate (KDP) under excitation at infrared wavelengths. In addition, the second-order nonlinear optical properties of DNP were also studied at visible wavelengths through the photorefractive effect and applied to demonstrate dynamic holographic reconstruction.