RESUMO
Wound management is a critical clinical issue, with substantial economic and social implications. Traditional dressings often lead to poor healing, impacting the effective wound repair is an ongoing challenge. So, this research aimed to investigate the development of a novel medical textile auxiliary in the form of a padded cotton bandage coated with a blend of agricultural biopolymers (xanthan gum and gum arabic) containing AgNPs with an emphasis on environmental friendliness and sustainability. The samples treated with various biopolymer blend compositions that were assessed by SEM and FTIR analysis, tensile strength, antibacterial properties, and comfort attributes, including air permeability and wicking. Antibacterial tests showed no bacterial growth on the samples, with the maximum inhibition zone measuring 3.3 mm. The mechanical and comfort tests revealed that the blend with 0.5 % xanthan gum and 1 % Arabic gum achieved the highest air permeability at 500 mm/s, the sample with the highest GSM demonstrated superior tensile strength at 42 N, and the 50 GSM sample exhibited better-wicking properties, reaching up to 1.33 cm, compared to the 100 GSM samples. This research is aimed to develop biopolymer-based cotton bandages with improved air permeability, antibacterial, tensile strength, moisture-wicking.
RESUMO
Bio-wastes are organic materials achieved through biological sources. The rice crop produces a substantial amount of biowaste in the form of rice husk, which is rich in cellulose. In this research, cellulose was extracted from rice husk by alkalization and bleaching process. The rice husk extracted cellulose was further used to develop cellulose hydrogel by using the sol-gel technique. The nonwoven fabric of industrial cotton waste was developed in three different GSM (50, 100, and 150). The nonwoven fabric was incorporated in the cellulose hydrogel having three different concentrations (1 %, 2 %, and 3 %) to develop the hydrogel non-woven cotton fabric composite for sustainable wound dressing applications. Moreover, prepared rice husk extracted cellulose hydrogel loaded with AgNO3 (0.5 %, 1 %, and 1.5 %) for achieving antibacterial characteristics. The Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were employed to confirm the existence of cellulose hydrogel layers within the cotton nonwoven composite. The developed hydrogel S12 exhibited a maximum fluid absorbency of 1281.84 % with a tensile strength of 28.6 N and elongation of 40.96 %. The results show successful rice husk extracted cellulose hydrogel formation, exhibiting structural stability, excellent exudate absorbency and moisture management, antimicrobial efficacy, and sustainability.
RESUMO
Hydrogels are used in modern wound dressings due to their ability to provide comfort with quick healing. However, poor mechanical properties of hydrogels limit their availability in commercial wound dressings. Nonwovens are highly porous, strong, and flexible structures that can provide support to hydrogels without compromising their properties. In this study, a cost-effective and sustainable hydroentangled nonwoven from industrial cotton waste was prepared and incorporated into alginate hydrogel for wound dressings. The novel composite of hydroentangled cotton nonwoven and alginate hydrogel was synthesized by a simple sol-gel technique. The effect of concentration of alginate hydrogel (0.5 wt%, 1 wt%, 1.5 wt %) and drying temperature (20 °C, 40 °C, 60 °C) of composite was analyzed for high wound exudates. The properties of prepared composite samples were characterized by scanning electron microscopy (SEM), XRD, tensile strength, tear strength, Air permeability, moisture management wound exudate test, and quantitative antimicrobial testing. Moreover, the comfort performance of these samples was evaluated by air permeability and moisture management testing. The properties of developed composites are highly dependent on the concentration of alginate and drying temperature. The results showed that maximum ï¬uid absorbency (%) of 650 was achieved with good comfort properties. This study can help to increase the commercial availability of hydrogel-based wound dressings.
RESUMO
Flame retardant (FR) finishing is crucial for developing protective textiles, traditionally relying on halogen, phosphorus, and phosphorus-nitrogen chemistries, which have limitations like toxicity and fabric stiffening. Innovative approaches such as nanotechnology, plasma treatments, and natural resource-based finishes are being explored to achieve sustainable FR textiles. This study presents the development and comprehensive characterization of hydrogel composites made from nonwoven fabrics composed of various hemp/wool blends (70/30, 80/20, and 90/10). The nonwoven fabrics were treated with a chitosan hydrogel incorporating banana sap to enhance their properties. Scanning electron microscope (SEM) examined the surface morphology and structural integrity of the composites, while Fourier transform infrared spectroscopy (FTIR) identified chemical interactions and functional groups. Differential scanning calorimeter (DSC) revealed thermal properties, water absorbency tests demonstrated hydrophilicity, mechanical testing assessed tensile strength, and vertical flammability tests evaluated fire resistance. SEM and FTIR revealed a successful coating of chitosan hydrogel with banana sap inclusions onto the hemp/wool nonwoven fabric, forming a composite structure. DSC analysis suggests higher chitosan content and hemp fiber ratio (like 70/30) lead to increased thermal stability of hydrogel composites. Higher chitosan concentrations in the hydrogel significantly improve the flame-retardant properties of hemp/wool nonwoven fabrics by reducing char length and enhancing protective char layer formation, with banana sap further promoting charring. These results indicate that the developed composite can be effectively used in flame-retardant textiles.
RESUMO
Gas separation membranes are critical in a variety of environmental research and industrial applications. These membranes are designed to selectively allow some gases to flow while blocking others, allowing for the separation and purification of gases for a variety of applications. Therefore, the demand for fast and energy-efficient gas separation techniques is of central interest for many chemical and energy production diligences due to the intensified levels of greenhouse and industrial gases. This encourages the researchers to innovate techniques for capturing and separating these gases, including membrane separation techniques. Polymeric membranes play a significant role in gas separations by capturing gases from the fuel combustion process, purifying chemical raw material used for plastic production, and isolating pure and noncombustible gases. Polyurethane-based membrane technology offers an excellent knack for gas separation applications and has also been considered more energy-efficient than conventional phase change separation methodologies. This review article reveals a thorough delineation of the current developments and efforts made for PU membranes. It further explains its uses for the separation of valuable gases such as carbon dioxide (CO2), hydrogen (H2), nitrogen (N2), methane (CH4), or a mixture of gases from a variety of gas spillages. Polyurethane (PU) is an excellent choice of material and a leading candidate for producing gas-separating membranes because of its outstanding chemical chemistry, good mechanical abilities, higher permeability, and variable microstructure. The presence of PU improves several characteristics of gas-separating membranes. Selectivity and separation efficiency of PU-centered membranes are enhanced through modifications such as blending with other polymers, use of nanoparticles (silica, metal oxides, alumina, zeolite), and interpenetrating polymer networks (IPNs) formation. This manuscript critically analyzes the various gas transport methods and selection criteria for the fabrication of PU membranes. It also covers the challenges facing the development of PU-membrane-based separation procedures.
Assuntos
Gases , Membranas Artificiais , Poliuretanos , Poliuretanos/química , Gases/química , Poluentes Atmosféricos/análise , Poluentes Atmosféricos/químicaRESUMO
Alginate hydrogel is highly efficient for water filtration due to its anti-fouling nature and formation of strong hydration membranes. However, poor mechanical properties of alginate hydrogel membrane limit its installation in water treatment. There is a need to enhance mechanical properties of alginate hydrogel membranes using eco-friendly, cost-effective materials and technologies. In this work, hydroentangled non-woven from cotton waste (comber noil) fibers was prepared. This non-woven was immersed in solution of sodium alginate (0.5 %, 1 %, 1.5 %) followed by dipping in calcium chloride solution which resulted in gel formation on and into cotton fibers. The successful formation of gel on non-woven fabric was confirmed through FTIR (Fourier transform infrared spectroscopy) and properties of this composite membrane were analyzed by SEM (Scanning electron microscopy), XRD (X-ray diffraction), DSC (Differential scanning calorimeter), water contact, water flux, oil-water filtration, air permeability, tensile strength, and porosity tests. The results showed that porosity of prepared hydrogel membranes decreased with increasing alginate concentration from 0.5 % to 1.5 % which resulted in decreased water permeation flux from 2655 h-1/m2 to 475 h-1/m2. The prepared membrane has separation efficiencies for the oil-water mixture in the range of 97.5 % to 99.5 %. Moreover, the developed samples also showed significant antibacterial activity as well as improved mechanical properties. The strength of the prepared membrane is in the range of 40 N to 80 N. The developed sodium alginate hydrogel-based non-woven membrane could have potential applications for commercial water filtration systems.
Assuntos
Alginatos , Hidrogéis , Hidrogéis/química , Alginatos/química , Espectroscopia de Infravermelho com Transformada de Fourier , Cloreto de Cálcio , AntibacterianosRESUMO
Recently, quantum-dot-based core/shell structures have gained significance due to their optical, optoelectronic, and magnetic attributes. Controlling the fluorescence lifetime of QDs shells is imperative for various applications, including light-emitting diodes and single-photon sources. In this work, novel Cu-doped CdS/ZnS shell structures were developed to enhance the photoluminescence properties. The objective was to materialize the Cu-doped CdS/ZnS shells by the adaptation of a two-stage high-temperature doping technique. The developed nanostructures were examined with relevant characterization techniques such as transmission electron microscopy (TEM) and ultraviolet-visible (UV-vis) emission/absorption spectroscopy. Studying fluorescence, we witnessed a sharp emission peak at a wavelength of 440 nm and another emission peak at a wavelength of 620 nm, related to the fabricated Cu-doped CdS/ZnS core/shell QDs. Our experimental results revealed that Cu-doped ZnS shells adopted the crystal structure of CdS due to its larger bandgap. Consequently, this minimized lattice mismatch and offered better passivation to any surface defects, resulting in increased photoluminescence. Our developed core/shells are highly appropriate for the development of efficient light-emitting diodes.
RESUMO
Hydrogels wound dressings have enormous advantages due to their ability to absorb high wound exudate, capacity to load drugs, and provide quick pain relief. The use of hydrogels as wound dressings in their original form is a considerable challenge, as these are difficult to apply on wounds without support. Therefore, the incorporation of polymeric hydrogels with a certain substrate is an emerging field of interest. The present study fabricated cellulose hydrogel using the sol-gel technique and reinforced it with nonwoven cotton for sustainable wound dressing application. The nonwoven cotton was immersed inside the prepared solution of cellulose and heated at 50 °C for 2 h to form cellulose hydrogel-nonwoven cotton composites and characterized for a range of properties. In addition, the prepared hydrogel composite was also loaded with titania particles to attain antibacterial properties. The Fourier transform infrared spectroscopy and scanning electron microscopy confirmed the formation of cellulose hydrogel layers inside the nonwoven cotton structure. The fabricated composite hydrogels showed good moisture management and air permeability, which are essential for comfortable wound healing. The wound exudate testing revealed that the fluid absorptive capacity of cellulose hydrogel nonwoven cotton composite was improved significantly in comparison to pure nonwoven cotton. The results reveal the successful hydrogel formation, having excellent absorbing, antimicrobial, and sustainable properties.