Composition of Whole Grain Dietary Fiber and Phenolics and Their Impact on Markers of Inflammation.

Inflammation is an important biological response to any tissue injury. The immune system responds to any stimulus, such as irritation, damage, or infection, by releasing pro-inflammatory cytokines. The overproduction of pro-inflammatory cytokines can lead to several diseases, e.g., cardiovascular diseases, joint disorders, cancer, and allergies. Emerging science suggests that whole grains may lower the markers of inflammation. Whole grains are a significant source of dietary fiber and phenolic acids, which have an inverse association with the risk of inflammation. Both cereals and pseudo-cereals are rich in dietary fiber, e.g., arabinoxylan and ß-glucan, and phenolic acids, e.g., hydroxycinnamic acids and hydroxybenzoic acids, which are predominantly present in the bran layer. However, the biological mechanisms underlying the widely reported association between whole grain consumption and a lower risk of disease are not fully understood. The modulatory effects of whole grains on inflammation are likely to be influenced by several mechanisms including the effect of dietary fiber and phenolic acids. While some of these effects are direct, others involve the gut microbiota, which transforms important bioactive substances into more beneficial metabolites that modulate the inflammatory signaling pathways. Therefore, the purpose of this review is twofold: first, it discusses whole grain dietary fiber and phenolic acids and highlights their potential; second, it examines the health benefits of these components and their impacts on subclinical inflammation markers, including the role of the gut microbiota. Overall, while there is promising evidence for the anti-inflammatory properties of whole grains, further research is needed to understand their effects fully.

Ultrasound Intensify the Flavonoid Production of the Willow Bracket Mushroom, Phellinus igniarius (Agaricomycetes), Fermentation Mycelia.

This research aimed to use a novel and effective ultrasound (US) approach for obtaining high bio-compound production, hence proposing strategies for boosting active ingredient biosynthesis. Furthermore, the US promotes several physiological effects on the relevant organelles in the cell, morphological effects on the structure of Phellinus igniarius mycelium, and increases the transfer of nutrients and metabolites. One suitable US condition for flavonoid fermentation was determined as once per day for 7-9 days at a frequency 22 + 40 kHz, power density 120 W/L, treated 10 min, treatment off time 7 s. The flavonoid content and production increased about 47.51% and 101.81%, respectively, compared with the untreated fermentation (P < 0.05). SEM showed that sonication changes the morphology and structure of Ph. igniarius mycelium; TEM reveals the ultrasonic treatment causes organelle aggregation. The ultrasound could affect the metabolism of the biosynthesis of the active ingredients.

Wheat bran arabinoxylan-soybean protein isolate emulsion-filled gels as a ß-carotene delivery carrier: Effect of polysaccharide content on textural and rheological properties.

This study aimed to investigate the effects of different wheat bran arabinoxylan (WBAX) concentrations (1, 2, 3, and 4 wt%) on the structural and physicochemical properties of WBAX-soybean protein isolate (SPI) emulsion-filled gels (EFGs) prepared using laccase and heat treatment. The properties of the various gels as well as their microstructure, rheology, and in vitro digestion behaviors were investigated. Results showed that WBAX-SPI EFGs with a 3 wt% WBAX concentration had a smooth and uniform appearance, high water holding capacity (98.5 ± 0.2 %), and enhanced mechanical properties. Rheological experiments suggested that a stronger and closer gel network was formed at 3 wt% WBAX concentration. Fourier transform infrared spectroscopy showed that laccase and heat treatment not only catalyzed the intramolecular crosslinking of WBAX and SPI, respectively, but also promoted the interaction between WBAX and SPI. Confocal laser scanning microscopy revealed that the WBAX gel network was interspersed within the SPI network. The interactions contributing to the gelation analysis revealed that chemical (disulfide bond) and physical (hydrogen bond and hydrophobic) interactions promoted the formation of denser EFGs. Furthermore, the WBAX-SPI EFGs provided a ß-carotene bioaccessibility of 21.8 ± 0.6 %. Therefore, our study suggests that WBAX-SPI EFGs hold promising potential for industrial applications in the delivery of ß-carotene.

Research Progress of Protein-Based Bioactive Substance Nanoparticles.

Bioactive substances exhibit various physiological activities-such as antimicrobial, antioxidant, and anticancer activities-and have great potential for application in food, pharmaceuticals, and nutraceuticals. However, the low solubility, chemical instability, and low bioavailability of bioactive substances limit their application in the food industry. Using nanotechnology to prepare protein nanoparticles to encapsulate and deliver active substances is a promising approach due to the abundance, biocompatibility, and biodegradability of proteins. Common protein-based nanocarriers include nano-emulsions, nano-gels, nanoparticles, and nano complexes. In this review, we give an overview of protein-based nanoparticle fabrication methods, highlighting their pros and cons. Additionally, we discuss the applications and current issues regarding the utilization of protein-based nanoparticles in the food industry. Finally, we provide perspectives on future development directions, with a focus on classifying bioactive substances and their functional properties.

Spontaneous gelation behaviors and mechanism of Ficus awkeotsang Makino pectin.

Ficus awkeotsang Makino (jelly fig) can produce edible gels by rubbing its seeds in water at room temperature in which pectin is considered as the main gelling component. However, the spontaneous gelation mechanism of Ficus awkeotsang Makino (jelly fig) pectin (JFSP) is still unclear. This study aimed to reveal the structure, physicochemical properties, and spontaneous gelation behaviors and mechanism of JFSP. JFSP was first obtained by water extraction and alcohol precipitation method, with a pectin yield of 13.25 ± 0.42 % (w/w), weight-average molar mass (Mw) of 111.26 kDa, and methoxylation degree (DM) of 26.8 %. Analysis of monosaccharide compositions showed that JFSP was composed of 87.8 % galactose acid, indicating a high percentage of galacturonic acid blocks. Measurement on the gelling capacity suggested that JFSP gels can be easily formed by simply dispersing the pectin in water at room temperature without adding any co-solutes or metal ions. Gelation force analysis indicated that hydrogen bonding, hydrophobic interactions, and electrostatic interactions were the main factors contributing to gel formation. At 1.0 % (w/v) of pectin concentration, JFSP gels exhibited relatively high gel hardness (72.75 ± 1.15 g) and good thermal and freeze-thawing stability. Overall, these findings highlight the potential application of JFSP as a promising commercial pectin resource.

Drying kinetics and quality dynamics of ultrasound-assisted dried selenium-enriched germinated black rice.

Black rice is a functional food due to its higher protein, fiber, iron, antioxidant compounds, and other health benefits than traditional rice. The ultrasonic (US) pretreatments (10, 20, and 50 min) followed by hot-air drying (50, 60, and 70 °C) were applied to study the drying kinetics, mathematical modeling, thermodynamics, microstructure, bioactive profile, volatile compounds and to lock the nutritional composition of selenium-enriched germinated black rice (SeGBR). Ultrasonic-treated samples exhibited a 20.5% reduced drying time than control ones. The Hii model accurately describes the drying kinetics of SeGBR with the highest R2 (>0.997 to 1.00) among the fifteen studied models. The activation energy values in US-SeGBR varied from 3.97 to 13.90 kJ/mol, while the specific energy consumption ranged from 6.45 to 12.32 kWh/kg, which was lower than untreated. The obtained thermodynamic attributes of dried black rice revealed that the process was endothermic and non-spontaneous. Gallic acid, kaempferol, and cyanidin 3-glucoside were present in high concentrations in phenolics, flavonoids, and anthocyanins, respectively. The HS-SPME-GC-MS investigation detected and quantified 55 volatile compounds. The US-treated SeGBR had more volatile compounds, which may stimulate the release of more flavorful substances. The scanning electronic micrograph shows that the US-treated samples absorbed high water through several micro-cavities. Selenium concentration was significantly higher in US-treated samples at 50 °C than in control samples. In conclusion, ultrasound-assisted hot-air drying accelerated drying and improved SeGBR quality, which is crucial for the food industry and global promotion of this healthiest rice variety.

Optimization of Extrusion Treatments, Quality Assessments, and Kinetics Degradation of Enzyme Activities during Storage of Rice Bran.

Over the years, extrusion has been a multi-step thermal technique that has proven to be the most effective process to stabilize rice bran (RB). This study aimed to investigate the effects of extrusion treatment and temperature (15, 25, and 40 °C) on the storage stability, lipid oxidation, peroxidase, and peroxide values, free fatty acids, fatty acid composition, and protein variations of RB over 60 days. The study offers novel insights into the changes in RB's protein and amino acid compositions during extrusion and storage, which has not been extensively explored in prior research. After extrusion processing, peroxidase activity (POD) and lipase activity (LPS) were significantly reduced. However, peroxide value (PV), free fatty acids (FFA), and malondialdehyde content (MDA) observed a significantly increased by 0.64 mEqO2/kg, 8.3 mg/100 g, and 0.0005 µmol/L respectively. The storage stability of RB after extrusion shows that the POD, LPS, FFA, PV, and MDA were positively correlated with storage duration and temperature. The oleic acid/linoleic acid ratio in processed RB by extrusion had no significant changes during storage. The total and essential/non-essential amino acid ratios showed a downward trend of 5.26% and 8.76%, respectively. The first-order kinetics was the best-fitting model to describe the enzymatic inactivation and degradation of extruded RB during storage. The extrusion treatment did not affect the crude protein and the essential subunits of protein. Overall, the optimized extrusion procedure exhibited promising results in stabilizing the RB.

The Effects of Thermal Treatment on Lipid Oxidation, Protein Changes, and Storage Stabilization of Rice Bran.

Rice bran is a nutrient-rich and resource-dense byproduct of rice milling. The primary cause of rice bran utilization limitation is oxidative deterioration and inadequate storage facilities. Improving stability to extend the shelf-life of rice bran has thus become an utmost necessity. This study aimed to stabilize raw fresh rice bran (RB) by using dry heat methods at 120 °C (233, 143, and 88 min) and 130 °C (86, 66, and 50 min). The results indicated that after dry heat pretreatment, peroxidase levels were at 90%, and the storage stability of dry-heat-stabilized RB was better. However, with an increase in treatment temperature and time, the peroxidase activity improved while the lipase activity decreased to a certain extent without significant changes. The total saturated and unsaturated fatty acids were significantly unchanged during storage, while oleic/linoleic acid increased substantially by 1% at 120 °C for 88 min. The increase in treatment time and temperature was beneficial in controlling the fatty acid values. However, extended treatment time caused an increase in the peroxide value and MDA. The essential and non-essential amino acid ratios, which evaluate a protein's nutritional value, remained relatively stable. The essential subunit of rice bran protein was not affected by the temperature and time of dry heat treatment and storage time.

Energy efficient drying technologies for sweet potatoes: Operating and drying mechanism, quality-related attributes.

Sweet potatoes (SPs) are a versatile tuberous crop used as subsistence and cash crop in raw and processed forms. The major issue with SPs is post-harvest losses, which result in noticeable quality decline because of inappropriate handling, storage, delayed transit, and sales, as well as microbiological and enzymatic activity. Drying is an excellent strategy for managing short postharvest storage life, preserving nutrients, and maximizing long-term benefits. However, several parameters must be considered before drying SPs, such as relative humidity, temperature, drying duration, size, and shape. The current review looks at the factors influencing SPs' moisture loss, drying kinetics, diverse drying methods, pretreatments, operating conditions, and their efficacy in improving the drying process, functional, and nutritional qualities. An optimal drying process is required to preserve SPs to obtain concentrated nutrients and improve energy efficiency to be ecofriendly. Drying sweet potatoes using traditional methods such as sun or open-air drying was found to be a slow process that could result in a lower quality. Various advanced drying techniques, like vacuum, infrared, freeze drying, and pretreatments such as ultrasound and osmotic dehydration, have been developed and are successfully used globally. The best-fit thin-layer models (Hii, Page, two-term, logarithmic) utilized for drying SPs and appropriate modeling methods for optimizing drying procedures are also discussed.

Rheological and tribological nature of flaxseed gum influenced by concentration and temperature and its application as a coating agent for potato chips.

Influence of different concentrations (0.5, 1.0, 2.0, and 3.0% w/v) and temperatures (4, 25, 50, and 75°C) on particle size distribution (PSD) and rheological and tribological characteristics of flaxseed gum (FSG) solutions was investigated. Besides, FSG dispersions (0.5, 1.0, and 2.0% w/v) were used as edible coating and their influence on the quality parameters (oil uptake, moisture loss, texture, and sensory properties) of fried potato chips was studied. All FSG dispersions revealed shear-thinning nature and viscous properties (as G″ > G') that were more dominant at higher concentrations and lower temperatures. The power-law model presented a good fit in demonstrating the flow behavior of FSG dispersions. Concentration was the variable that affected the tribology of FSG dispersions, while temperature had little effect on the tribology. Particle size distribution was increased with the increasing concentration of FSG. FSG dispersions as an edible coating effectively reduced the moisture loss, oil uptake, and hardness properties of potato chips. Practical Application Profiling the influence of concentration and temperature on the rheology and tribology of flaxseed gum is particularly valuable during food processing. The results predict the physical properties of coated potato chips that can support the potential application of flaxseed gum as a coating agent. Today's consumers prefer healthier food products with low caloric, higher fiber content, functional properties, and sensory qualities. Food industries can use FSG as a low-cost natural coating material in terms of economic benefits, consumer acceptance, and providing an inordinate potential both for its protective effect and carrying functional compounds such as antioxidants in their coating matrix.

Acoustically-aided osmo-dehydration pretreatments under pulsed vacuum dryer for apple slices: drying kinetics, thermodynamics, and quality attributes.

The research work investigates the effect of different pretreatment conditions (osmotic dehydration [OD], ultrasound [US], and ultrasound-assisted osmotic dehydration [UOD]) on the drying kinetics modeling, thermodynamics, weight reduction, degradation kinetics of vitamin C, and color of apple slices under pulsed vacuum dryer (PVD). The findings showed that UOD pretreatment significantly improved drying time and increased weight reduction comparative to OD, US, and the control sample. Drying kinetics modeling revealed that the Hii model better described the drying kinetic behavior of the apple slices than the other nine mathematical models based on higher coefficient of determination (R2 ), root mean square error (RMSE), and reduced chi-square (χ2 ). Analysis of vitamin C content revealed a 46.05%, 31.28%, and 25.95% retention for UOD, US, and OD, respectively, after drying. Second-order kinetics could accurately predict the degradation kinetics of vitamin C compared to first-order kinetics. Vitamin C degradation kinetics showed lower k-value, higher D-value (time required for 90% degradation), and half-life indicating a higher retention of vitamin C content for UOD pretreatment compared to OD and US during drying. L*, b*, and chroma values of UOD were significantly (P < 0.05) higher compared to US, OD, and the control sample. PRACTICAL APPLICATION: The findings of this study revealed that ultrasonic-aided osmotic dehydration is a unique and novel pretreatment technique prior to drying, which significantly shortens drying time as a result of faster moisture/mass transfer, improves processing efficiency thereby reducing processing cost, improves quality parameters, and preserve phytochemicals. This makes the business operations of food processors competitive and as well provide value for customers.

Influence of different extraction techniques on recovery, purity, antioxidant activities, and microstructure of flaxseed gum.

Four extraction techniques (that is, hot water extraction [HWE], alkaline-acidic extraction [AAE], ultrasound assisted extraction [UAE], and microwave assisted extraction [MAE]) were compared for flaxseed gum extraction and their influence on the yield, purity, structural characterization (monosaccharide composition, molecular weight distribution, and microstructure by transmission electron microscope), and antioxidant activity (in terms of scavenging ability of 2,2-diphenyl-1-picrylhydrazyl [DPPH], 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid [ABTS], and reducing power) was investigated. The HWE achieved higher yield (8.96%) than UAE (7.84%) followed by MAE (7.01%) and AAE (6.44%). Moreover, the four flaxseed gum (FSG) samples exhibited the identical monosaccharide composition, but slight difference was observed in the content, whereas the molecular weight ratios exhibited significant difference. All samples displayed concentration-dependent manner for all antioxidant assays. UAE-FSG showed significant higher scavenging ability on DPPH free radical, ABTS free radical, reducing power, and ß-carotene bleaching assay followed by HWE-FSG, MAE-FSG, and AAE-FSG. Overall results showed that UAE was favorable to the purity of FSG, whereas HWE was more advantageous to improve the extraction yield and facile as it requires no special equipment. PRACTICAL APPLICATION: Extraction methods directly affect the recovery and purity of the extracted compound. Thus, this study could help in selection of appropriate extraction method for FSG. The results suggested that FSG possesses potential healthcare application in food industry because of their nutrition composition and antioxidant activities, and thus, it can be used for formulation of functional food as a natural antioxidant agent.

Production and Application of Biosurfactant Produced by Bacillus Licheniformis Ali5 in Enhanced Oil Recovery and Motor Oil Removal from Contaminated Sand.

The present study describes the production of biosurfactant from isolate B. licheniformis Ali5. Seven different, previously-reported minimal media were screened for biosurfactant production, and two selected media were further optimized for carbon source. Further, various fermentation conditions such as (pH 2-12, temperature 20-50 °C, agitation speed 100-300 rpm, NaCl (0-30 g·L-1) were investigated. The partially purified biosurfactant was characterized by Fourier transform infrared spectroscopy (FTIR) and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS) and found a lipopeptide mixture, similar to lichenysin-A. Biosurfactant reduced surface tension from 72.0 to 26.21 ± 0.3 and interfacial tension by 0.26 ± 0.1 mN.m-1 respectively, biosurfactant yield under optimized conditions was 1 g·L-1, with critical micelle concentration (CMC) of 21 mg·L-1 with high emulsification activity of (E24) 66.4 ± 1.4% against crude oil. Biosurfactant was found to be stable over extreme conditions. It also altered the wettability of hydrophobic surface by changing the contact angle from 49.76° to 16.97°. Biosurfactant efficiently removed (70-79%) motor oil from sand, with an efficiency of more than 2 fold as compared without biosurfactant (36-38%). It gave 32% additional oil recovery over residual oil saturation upon application to a sand-packed column. These results are indicative of potential application of biosurfactant in wettability alteration and ex-situ microbial enhanced oil recovery.

Longan (Dimocarpus longan) and lychee (Litchi chinensis): Functional ingredients in chocolate pralines.

Fresh and half-dried fruits of lychee (Litchi Chinensis) and longan (Dimocarpus longan) were processed by air drying and implemented in diverse forms as fillings in order to produce chocolate pralines. Both dried fruits and chocolate pralines were characterized with total polyphenols, proanthocyanidins, flavan-3-ols and antioxidant capacity (2, 2-diphenyl-1-picrylhydrazyl, 2, 2-Azino-Bis-3-Ethylbenzothiazoline-6-Sulfonic acid) were determined by spectrophotometric and sensory analyses by quantitative descriptive analysis. Specific polyphenolic compounds were quantified using high-performance liquid chromatography coupled with photodiode array detector. The bioactive content and profile of chocolate pralines produced with the addition of longan and lychee were not significantly altered when compared to plain chocolate, but the sensory analysis revealed a preference for lychee-containing pralines, due to characteristic fruity sensory properties. Since longan and lychee fruits are still underutilized as raw materials and ingredients in food production, preservation by drying and incorporation into new products may enable their popularization and increase functional food production. PRACTICAL APPLICATIONS: Since both longan and lychee are still underutilized as raw materials and ingredients in food production, preservation by drying and incorporation into new products may enable their popularization and increase functional food production.

Flaxseed gum: Extraction, bioactive composition, structural characterization, and its potential antioxidant activity.

Flaxseed gum (FSG) is a heteropolysaccharide consist of neutral and acidic components that makes up approximately 8% of seed mass. FSG was extracted from mixture of brown and golden varieties of flaxseeds by hot water extraction method. The molecular weight distribution, monosaccharide analysis, chemical composition, and surface morphology of FSG were scrutinized in the current study to get a better insight regarding this important polysaccharide. The average molecular weight was recorded as 1,322 kDa with a polydispersity ratio of 1.6 for Mw/Mn and 2.4 for Mn/Mz. High-performance liquid chromatography (HPLC) screening revealed that extracted FSG was comprised of rhamnose, arabinose, mannose, glucose, fucose, xylose, galactose, glucosamine, glucuronic acid, and galacturonic acid, of which mannose and glucosamine have not been reported previously. The antioxidant activities of FSG measured as DPPH, ABTS, reducing power, and total antioxidant activity clearly demonstrated the antioxidant potency of FSG. Fourier-transform infrared spectroscopy (FTIR) and the Nuclear magnetic resonance (NMR) (1 H, 13 C) s pectra ratified the presence of functional groups typical for polysaccharide. PRACTICAL APPLICATIONS: Flaxseed gum is a natural carbohydrate polymar. This study provides useful information regarding antioxidant potential, chemical, and structural characterization of FSG. The availability of a gum is fully characterized with bioactive composition, structural features, and antioxidant potential provides a toolset for the practical application in the food or drug industry.

Preliminary study to evaluate the phytochemicals and physiochemical properties in red and black date's vinegar.

Antioxidant activity, total phenolic content (TPC), total flavonoids, carotenoids, pH, and total titratable acidity of red and black date's vinegar were analyzed. The extraction method was designed and optimized for this purpose with respect to the variety and solvent concentrations along with the time of ultrasonication. The results showed that red dates' vinegar has significantly (p < 0.05) higher total phenols (3.38 ± 0.13 mg GAE/ml) and antioxidant activity as compared to black dates' vinegar, which had a higher amount of carotenoids (3.43 ± 0.11 mg/100 ml). Similarly, red dates' vinegar has more flavonoids as compared to commercially available Zhenjiang vinegar. In terms of physiochemical properties, both red and black date's vinegar were not significantly different (p > 0.05). Use of 50% and 80% methanol with 25 min of ultrasonication for extraction seemed more effective. The total phenols, flavonoids, antioxidant activity, carotenoids, and physiochemical analysis of the red and black date's vinegar indicated that vinegar from dates (red or black dates) is a competitive product in the marketplace.

Effect of infrared drying with multifrequency ultrasound pretreatments on the stability of phytochemical properties, antioxidant potential, and textural quality of dried sweet potatoes.

The study aims to determine drying of sweet potatoes using multifrequency ultrasound (US) pretreatments (20, 40, and 60 kHz) at three different infrared (IR) drying temperatures (60, 70, and 80°C) and evaluate the phytochemical and textural quality of the dried product. Drying time was significantly decreased in moderate US frequency (40 kHz) at 70°C with the increasing drying temperature. Comparing to the fresh samples, the dried samples showed the highest amount of phytochemical contents. The antioxidant activity of the samples increased especially at 60 kHz and 80°C, while US-IR treatments shown a positive impact on total carotenoids contents and ß-carotene. For phenolic compounds, Ellagic acid and Rutin were quantified in higher amount while Quercetin-3-rhamnoside and Quercetin 3-ß-D-glucoside were two new compounds identified for the first time in sweet potatoes. FTIR spectra showed the successful synthesis of OH group and phenolics in samples treated with the US at 20 kHz. PRACTICAL APPLICATIONS: This study investigated the effects of multifrequency ultrasound with different infrared drying temperatures. The study provides evidence that infrared drying application in synergy with ultrasonic pretreatments can improve drying efficiency and food quality much better than using each method alone. Total phenolic contents and total flavonoid contents remained stable at US 40 kHz and 60°C conditions. The findings showed that moderate ultrasound frequency (40 kHz) at 60°C improved phytochemical properties while antioxidant activities showed better preservation response at 80°C with 60 kHz. In addition, the samples treated with the same US treatment at 40 kHz showed less cell breakage in SEM analysis.