Evolutionary Computation for Parameter Extraction of Organic Thin-Film Transistors Using Newly Synthesized Liquid Crystalline Nickel Phthalocyanine.

In this work, the topic of the detrimental contact effects in organic thin-film transistors (OTFTs) is revisited. In this case, contact effects are considered as a tool to enhance the characterization procedures of OTFTs, achieving more accurate values for the fundamental parameters of the transistor threshold voltage, carrier mobility and on-off current ratio. The contact region is also seen as a fundamental part of the device which is sensitive to physical, chemical and fabrication variables. A compact model for OTFTs, which includes the effects of the contacts, and a recent proposal of an associated evolutionary parameter extraction procedure are reviewed. Both the model and the procedure are used to assess the effect of the annealing temperature on a nickel-1,4,8,11,15,18,22,25-octakis(hexyl)phthalocyanine (NiPc6)-based OTFT. A review of the importance of phthalocyanines in organic electronics is also provided. The characterization of the contact region in NiPc6 OTFTs complements the results extracted from other physical-chemical techniques such as differential scanning calorimetry or atomic force microscopy, in which the transition from crystal to columnar mesophase imposes a limit for the optimum performance of the annealed OTFTs.

Surface plasmon resonance imaging detection of silver nanoparticle-tagged immunoglobulin.

The detection sensitivity of silver nanoparticle (AgNP)-tagged goat immunoglobulin G (gIgG) microarrays was investigated by studying surface plasmon resonance (SPR) images captured in the visible wavelength range with the help of a Kretchmann-configured optical coupling set-up. The functionalization of anti-gIgG molecules on the AgNP surface was studied using transmission electron microscopy, photon correlation measurements and UV-visible absorption spectroscopy. A value of 1.3×10(7) M(-1) was obtained for the antibody-antigen binding constant by monitoring the binding events at a particular resonance wavelength. The detection limit of this SPR imaging instrument is 6.66 nM of gIgG achieved through signal enhancement by a factor of larger than 4 owing to nanoparticle tagging with the antibody.

High-mobility solution-processed copper phthalocyanine-based organic field-effect transistors.

Solution-processed films of 1,4,8,11,15,18,22,25-octakis(hexyl) copper phthalocyanine (CuPc6) were utilized as an active semiconducting layer in the fabrication of organic field-effect transistors (OFETs) in the bottom-gate configurations using chemical vapour deposited silicon dioxide (SiO2) as gate dielectrics. The surface treatment of the gate dielectric with a self-assembled monolayer of octadecyltrichlorosilane (OTS) resulted in values of 4×10-2 cm2 V-1 s-1 and 106 for saturation mobility and on/off current ratio, respectively. This improvement was accompanied by a shift in the threshold voltage from 3 V for untreated devices to -2 V for OTS treated devices. The trap density at the interface between the gate dielectric and semiconductor decreased by about one order of magnitude after the surface treatment. The transistors with the OTS treated gate dielectrics were more stable over a 30-day period in air than untreated ones.

Spectroscopic investigation of sulfonate phthalocyanine to probe enzyme reactions for heavy metals detection.

Optical absorption and Raman spectra of the sulfonated copper phthalocyanine (CuTsPc) layer were exploited for detection of cadmium (Cd) contaminants in water. Acetylcholine esterase was immobilized by freely suspending them in calcium alginate microbeads and this gel was then spincoated on the drop cast sulfonated copper phthalocyanine film on a glass substrate to form a bilayer. The inhibition of catalytic reaction between acetylcholine chloride and enzyme due to Cd contaminants was monitored by recording changes in spectra of drop cast CuTsPc as an indicator. The detection limit of cadmium content in water was found to be 1 ppm.

Optical biodetection of cadmium and lead ions in water.

A three layer waveguiding silicon dioxide (SiO(2))/silicon nitride (Si(3)N(4))/SiO(2) structure on silicon substrate was proposed as an optically efficient biosensor for calibration of heavy metal ions in drinking water. The catalytic activities of urease and acetylcholine esterase (AchE) were inhibited by the presence of cadmium (Cd(2+)) and lead (Pb(2+)) ions. The detection limit as low as 1 ppb was achieved by employing the technique of total reflection at the interface between the Si(3)N(4) core and composite polyelectrolyte self-assembled (PESA) membranes containing cyclotetrachromotropylene (CTCT) as an indicator.

Optical studies on chemical bath deposited nanocrystalline CdS thin films.

Nanocrystalline cadmium sulphide thin films were prepared by the chemical bath (CB) deposition using a mixed aqueous solution of cadmium chloride, thiourea, and ammonium chloride. The XRD patterns showed that the CdS films were of hexagonal phase with preferred (002) orientation. From ellipsometric measurements, the film thickness was found to be in order of 66 nm and the optical band gap was estimated to be 2.4 eV.