Surface Modification of PHBV Fibrous Scaffold via Lithium Borohydride Reduction.

In this study, lithium borohydride (LiBH4) reduction was used to modify the surface chemistry of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) fibers. Although the most common reaction employed in the surface treatment of polyester materials is hydrolysis, it is not suitable for fiber modification of bacterial polyesters, which are highly resistant to this type of reaction. The use of LiBH4 allowed the formation of surface hydroxyl groups under very mild conditions, which was crucial for maintaining the fibers' integrity. The presence of these groups resulted in a noticeable improvement in the surface hydrophilicity of PHBV, as revealed by contact angle measurements. After the treatment with a LiBH4 solution, the electrospun PHBV fibrous mat had a significantly greater number of viable osteoblast-like cells (SaOS-2 cell line) than the untreated mat. Moreover, the results of the cell proliferation measurements correlated well with the observed cell morphology. The most flattened SaOS-2 cells were found on the surface that supported the best cell attachment. Most importantly, the results of our study indicated that the degree of surface modification could be controlled by changing the degradation time and concentration of the borohydride solution. This was of great importance since it allowed optimization of the surface properties to achieve the highest cell-proliferation capacity.

Novel Xanthone Derivatives Impair Growth and Invasiveness of Colon Cancer Cells In Vitro.

Natural xanthones are a large group of compounds from which promising anticancer properties could be further developed by chemical modifications. This study aimed to investigate the influence of four novel xanthone derivatives based on a naturally occurring xanthone skeleton on the invasiveness of colon cancer cells in vitro. First, the concentrations required to inhibit growth of three colorectal cancer cell lines to 50% (GI50) of all the studied compounds, as well as the natural xanthones used as a reference (gambogic acid and α-mangostin), have been established (MTS reduction test). Next, the assays determining several aspects of the GI25 xanthones influence on colorectal cancer cells, including cytotoxicity, migration and invasion potential, interaction with extracellular matrix and endothelial cells, as well as expression of selected invasiveness related genes have been performed. Our results demonstrate that these novel xanthone derivatives impair colorectal cancer proliferation, motility, adhesion to extracellular matrix and to endothelial cells, and also induce apoptosis and cell death. Moreover, their activity is comparable to cisplatin and 5-fluorouracil, used as reference compounds. Conducted research indicates our compounds for further research and development as novel drugs in colorectal cancer treatment.

The Role of the Mechanical, Structural, and Thermal Properties of Poly(l-lactide-co-glycolide-co-trimethylene carbonate) in the Development of Rods with Aripiprazole.

In this work, we aimed to determine the role of the mechanical, structural, and thermal properties of poly(l-lactide-co-glycolide-co-trimethylene carbonate) (P(l-LA:GA:TMC)) with shape memory in the formulation of implantable and biodegradable rods with aripiprazole (ARP). Hot melt extrusion (HME) and electron beam (EB) irradiation were applied in the formulation process of blank rods and rods with ARP. Rod degradation was carried out in a PBS solution. HPLC; NMR; DSC; compression and tensile tests; molecular weight (Mn); water uptake (WU); and weight loss (WL) analyses; and SEM were used in this study. HME and EB irradiation did not influence the structure of ARP. The mechanical tests indicated that the rods may be safely implanted using a pre-filled syringe. During degradation, no unfavorable changes in terpolymer content were observed. A decrease in the glass transition temperature and the Mn, and an increase in the WU and the WL were revealed. The loading of ARP and EB irradiation induced earlier pore formation and more intense WU and WL changes. ARP was released in a tri-phasic model with the lag phase; therefore, the proposed formulation may be administered as a delayed-release system. EB irradiation was found to accelerate ARP release.

Electron beam sterilization of implantable rods with risperidone and with 17-ß-estradiol: a structural, thermal and morphology study.

PURPOSE: Poly(L-lactide-co-glycolide-co-trimethylene carbonate) rods with risperidone and 17-ß-estradiol were sterilized by electron beam irradiation. The aim of the study was to assess electron beam irradiation impact on terpolymer composition, chain microstructure, glass transition temperature, molecular weight and the morphological features of rods. METHODS: Hot melt extrusion in the formulation of rods was applied. Sterilization of the rods was performed by electron beam in an electron beam accelerator (10 MeV, 360 mA, 25 kGy). The following methods in the development of rods were applied: nuclear magnetic resonance, differential scanning calorimetry, gel permeation chromatography and scanning electron microscopy. RESULTS: Sterilization influenced only glass transition temperature in blind rods and rods with risperidone. As for the other parameters, no significant changes were observed as far as a sterilization effect is concerned. However, some changes were noted after introducing drug substances and after extrusion. CONCLUSIONS: Electron beam irradiation of rods with risperidone and rods with 17-ß-estradiol is an adequate method for sterilizing implantable drug delivery systems.