Hydrothermal Synthesis of Cancrinite from Coal Gangue for the Immobilization of Sr.

The primary objective of this study is to investigate and develop a rapid and effective method for the immobilization of Sr in the event of a nuclear leakage incident. Coal gangue, an underutilized form of solid waste from the coal industry, can be used as a raw material for curing Sr due to its high content of silica-alumina oxides. In the present study, Sr was successfully solidified in cancrinite synthesized using a hydrothermal method with coal gangue as raw material. A stable cancrinite phase was formed at a relative alkali concentration of more than 6 M. When the Sr/Al(Si) ratio was <1/6, cancrinite was the only stable phase that varied with the hydrothermal temperature and time. When the Sr/Al(Si) ratio increased to 1/2, the cancrinite phase completely disappeared, and a new strontium feldspar phase (SrAl2Si2O8) appeared. PCT leaching experiments showed that when Sr/Al(Si) < 1/6, the Sr leaching rate of Sr-cancrinite samples obtained by hydrothermal synthesis at 180 °C for 24 h was very low.

Post-transcriptional regulation of grain weight and shape by the RBP-A-J-K complex in rice.

RNA-binding proteins (RBPs) are components of the post-transcriptional regulatory system, but their regulatory effects on complex traits remain unknown. Using an integrated strategy involving map-based cloning, functional characterizations, and transcriptomic and population genomic analyses, we revealed that RBP-K (LOC_Os08g23120), RBP-A (LOC_Os11g41890), and RBP-J (LOC_Os10g33230) encode proteins that form an RBP-A-J-K complex that negatively regulates rice yield-related traits. Examinations of the RBP-A-J-K complex indicated RBP-K functions as a relatively non-specific RBP chaperone that enables RBP-A and RBP-J to function normally. Additionally, RBP-J most likely affects GA pathways, resulting in considerable increases in grain and panicle lengths, but decreases in grain width and thickness. In contrast, RBP-A negatively regulates the expression of genes most likely involved in auxin-regulated pathways controlling cell wall elongation and carbohydrate transport, with substantial effects on the rice grain filling process as well as grain length and weight. Evolutionarily, RBP-K is relatively ancient and highly conserved, whereas RBP-J and RBP-A are more diverse. Thus, the RBP-A-J-K complex may represent a typical functional model for many RBPs and protein complexes that function at transcriptional and post-transcriptional levels in plants and animals for increased functional consistency, efficiency, and versatility, as well as increased evolutionary potential. Our results clearly demonstrate the importance of RBP-mediated post-transcriptional regulation for the diversity of complex traits. Furthermore, rice grain yield and quality may be enhanced by introducing various complete or partial loss-of-function mutations to specific RBP genes using clustered regularly interspaced palindromic repeats (CRISPR)/CRISPR-associated protein 9 technology and by exploiting desirable natural tri-genic allelic combinations at the loci encoding the components of the RBP-A-J-K complex through marker-assisted selection.

Multifunctional GeMnTe2 Synergistically Optimizes Thermoelectric Properties of SnTe-In2Te3 Alloys.

SnTe-In2Te3 alloys ensure excellent electrical properties in the whole temperature region due to the resonant level. Nevertheless, temperature-sensitive resonance states and single phonon scattering restrict further improvement of thermoelectric performance. Consequently, it is anticipated that additional electrically independent scattering sources should be introduced to impede phonon transport. Here, the SnTe-In2Te3-GeMnTe2 alloy is prepared by further solidifying cubic GeMnTe2, which demonstrates multiple modulation effects. The highly redissolved Mn2+ promotes the valence band convergence, enhances the Seebeck coefficient at higher temperature, and balances the possible weakened resonance level effect at higher carrier concentrations, and a high average power factor (1.94 mW m-1 K-2) is realized over the entire temperature range. Additionally, compensatory vacancies, substitutions, and Ge/Mn precipitates are easily constructed with GeMnTe2 alloying, leading to a further reduction in lattice thermal conductivity, which reaches κl ∼ 0.6 W m-1 K-1 at 850 K. Ultimately, a high peak zT of ∼1.25 (850 K) and a zTave of 0.72 (300-850 K) are realized in (SnTe)2.91(In2Te3)0.03(Ge0.5Mn0.5Te)1.2, and the maximum thermoelectric conversion efficiency of ∼2.8% (ΔT ∼ 450 K) is achieved. The present results indicate multiple effects of GeMnTe2 in enhancing the thermoelectric performance of SnTe-In2Te3 alloys.

A feasibility study of noninvasive prenatal diagnosis in facioscapulohumeral muscular dystrophy type 1 in a Chinese family.

Objective: To demonstrate the feasibility of haplotype-based noninvasive prenatal diagnosis of Facioscapulohumeral Muscular Dystrophy type 1 (FSHD1). Methods: Bionano optical mapping was used to identify the D4Z4 structural variation of the genomic DNA sample from the proband affected with FSHD1. In addition, based on the technique of next generation sequencing, the pathogenic haplotype was determined by using trio strategy through genotyping his parents, and also fetal inheritance of paternal haplotypes was then deduced using the Hidden Markov Model. Results: Bionano optical mapping analysis revealed that the proband has only three D4Z4 repeats left in the 4q35 chromosomal region and a disease-permitting 4qA haplotype. The other normal allele of the proband contains 29 D4Z4 repeats and also a 4qA haplotype. The noninvasive cell-free fetal DNA (cffDNA)-based haplotype analysis suggested that the fetus inherited the pathogenic allele from his father and thus was predicted to be affected by FSHD1. In addition, Bionano optical mapping also demonstrated the presence of the pathogenic allele in the fetus by interrogating the genomic DNA from the amniotic fluid cells. Conclusion: Our study showed the cffDNA-based haplotyping was feasible for the noninvasive prenatal diagnosis of FSHD1, which is able to provide earlier testing results with a lower risk of miscarriage and infection than invasive techniques.

Cu2Te Incorporation-Induced High Average Thermoelectric Performance in p-Type Bi2Te3 Alloys.

p-Type (Bi, Sb)2Te3 alloys are attractive materials for near-room-temperature thermoelectric applications due to their high atomic masses and large spin-orbit interactions. However, their narrow band gaps originating from spin-orbit interactions lead to bipolar excitation, thereby limiting average thermoelectrics within a local temperature region (300-400 K). Here, we introduce Cu2Te into the Bi0.3Sb1.7Te3 (BST) lattice to implement high thermoelectrics over a wide temperature range. The carrier concentration is synergistically modulated via Cu substitution and the evolution of intrinsic point defects (antisites and vacancies). Furthermore, the chain effect caused by Cu2Te incorporation in BST is reflected in the improvement of the weighted mobility µW, thereby enhancing the power factor in the whole temperature range. Extrinsic and intrinsic defects due to the incorporation of Cu2Te lead to a significant reduction in the lattice thermal conductivity κL, which is further demonstrated by Raman spectroscopy. Combining κL and µW, the quantity factor B increases from 0.5 to 1 with increasing Cu2Te content due to not only the reduction of κL but also a significant improvement in electrical properties. Eventually, a peak figure of merit (zT) of ∼1.15 at 423 K is achieved in BST-Cu2Te samples, and an average figure of merit (zTave) of ∼1.12 (350-500 K) surpasses other excellent p-type Bi2Te3-based thermoelectrics. Such a synergistic effect can facilitate near-room-temperature thermoelectric applications of Bi2Te3-based alloys and provide chances for the technology space in thermoelectrics.

Methyladenosine Modification in RNAs: From Regulatory Roles to Therapeutic Implications in Cancer.

Methyladenosine modifications are the most abundant RNA modifications, including N6-methyladenosine (m6A), N1-methyladenosine (m1A), and 2'-O-methyladenosine (m6Am). As reversible epigenetic modifications, methyladenosine modifications in eukaryotic RNAs are not invariable. Drastic alterations of m6A are found in a variety of diseases, including cancers. Dynamic changes of m6A modification induced by abnormal methyltransferase, demethylases, and readers can regulate cancer progression via interfering with the splicing, localization, translation, and stability of mRNAs. Meanwhile, m6A, m1A, and m6Am modifications also exert regulatory effects on noncoding RNAs in cancer progression. In this paper, we reviewed recent findings concerning the underlying biomechanism of methyladenosine modifications in oncogenesis and metastasis and discussed the therapeutic potential of methyladenosine modifications in cancer treatments.

Virtual Reality in Treatment for Psychological Problems in First-Line Health Care Professionals Fighting COVID-19 Pandemic: A Case Series.

ABSTRACT: Virtual reality therapy (VRT) is a new psychotherapeutic approach integrating virtual reality technology and psychotherapy. This case series aimed to study effectiveness of VRT in treating psychological problems. We described four cases of first-line health care professionals with emerging clinically significant early psychological problems during the COVID-19 outbreak, and specifically received the VRT treatment. We compared the Patient Health Questionnaire 9 items (PHQ-9), Generalized Anxiety Disorder-7 (GAD-7), PHQ-15, and Athens Insomnia Scale to evaluate psychological symptoms and sleep quality before and after sessions. All four cases showed a reduction in scale comparison. General scores of the PHQ-9 reduced 65%, GAD-7 reduced 52.17%, PHQ-15 decreased 38.17%, and scores of the Athens Insomnia Scale reduced 67.44%. Meanwhile, a reduction in depression, anxiety, psychosomatic, and sleeping symptoms was also found, which decreased 76.92% in general. These results are highly significant statistically. This case series demonstrated the effectiveness of VRT on psychological problems as a promising approach to apply on various psychological distress and disorders.

Factors associated with left ventricular diastolic dysfunction in patients with septic shock.

PURPOSE: To investigate risk factors associated with left ventricular diastolic dysfunction (LVDD) of patients with septic shock. MATERIALS AND METHODS: Patients with septic shock concomitant with or without LVDD were retrospectively enrolled and divided into the LVDD group (n = 17) and control without LVDD (n = 85). The clinical and ultrasound data were analyzed. RESULTS: A significant (P < 0.05) difference existed between the two groups in serum creatinine, APACHE II score, serum glucose, triglyceride, BUN, FT4, LAVI, mitral E, average e', E/average e', septal e', septal e'/septal s', E/septal e', lateral s', lateral e', and E/lateral e'. LAVI > 37 mL/m2, septal e' < 7 cm/s (OR 11.04, 95% CI 3.38-36.05), septal e'/septal s' < 0.8 (OR 4.09, 95% CI 1.37-12.25), E/septal e' > 15 (OR 22.86, 95% CI 6.09-85.79), lateral e' < 8 cm/s (OR 9.16, 95% CI 2.70-31.07), E/lateral e' > 13 (OR 52, 95% CI 11.99- 225.55), lateral s' < 10 (OR 3.36, 95% CI 1.13-9.99), average e' > 10, E/average e' > 10 (OR 9.53, 95% CI 2.49-36.46), APACHE II score > 16 (OR 3.33, 95% CI 1.00-11.03), SOFA > 5 (or 3.43, 95% CI 1.11-10.60), BUN > 12 mmol/L (OR 3.37, 95% CI 1.15-9.87), serum creatinine > 146 µmol/L (OR 5.08, 95% CI 1.69-15.23), serum glucose > 8 mmol/L (OR 3.36, 95% CI 1.09-10.40), and triglyceride > 1.8 mmol/L were significant (P < 0.05) risk factors for LVDD. LAVI > 37 ml/m2, lateral e' < 8 cm/s, E/lateral e' > 13, and SOFA > 5 were significant (P < 0.05) independent risk factors for LVDD. ROC curve analysis demonstrated that the cut-off value and AUC were 37.09 mL/m2 and 0.85 for LAVI, 8.00 cm/s and 0.89 for lateral e', 12.86 and 0.82 for E/lateral e', and 5.00 and 0.69 for SOFA, respectively. CONCLUSION: Left atrial volume index, mitral lateral e', E/lateral e', and SOFA score are significant independent risk factors for predicting left ventricular diastolic dysfunction in patients with septic shock.

Arabidopsis Novel Microgametophyte Defective Mutant 1 Is Required for Pollen Viability via Influencing Intine Development in Arabidopsis.

The pollen intine layer is necessary for male fertility in flowering plants. However, the mechanisms behind the developmental regulation of intine formation still remain largely unknown. Here, we identified a positive regulator, Arabidopsis novel microgametophyte defective mutant 1 (AtNMDM1), which influences male fertility by regulating intine formation. The AtNMDM1, encoding a pollen nuclei-localized protein, was highly expressed in the pollens at the late anther stages, 10-12. Both the mutations and the knock-down of AtNMDM1 resulted in pollen defects and significantly lowered the seed-setting rates. Genetic transmission analysis indicated that AtNMDM1 is a microgametophyte lethal gene. Calcofluor white staining revealed that abnormal cellulose distribution was present in the aborted pollen. Ultrastructural analyses showed that the abnormal intine rather than the exine led to pollen abortion. We further found, using transcriptome analysis, that cell wall modification was the most highly enriched gene ontology (GO) term used in the category of biological processes. Notably, two categories of genes, Arabinogalactan proteins (AGPs) and pectin methylesterases (PMEs) were greatly reduced, which were associated with pollen intine formation. In addition, we also identified another regulator, AtNMDM2, which interacted with AtNMDM1 in the pollen nuclei. Taken together, we identified a novel regulator, AtNMDM1 that affected cellulose distribution in the intine by regulating intine-related gene expression; furthermore, these results provide insights into the molecular mechanisms of pollen intine development.

Preconstructing Asymmetric Interface in Air Cathodes for High-Performance Rechargeable Zn-Air Batteries.

Rechargeable zinc-air batteries afford great potential toward next-generation sustainable energy storage. Nevertheless, the oxygen redox reactions at the air cathode are highly sluggish in kinetics to induce poor energy efficiency and limited cycling lifespan. Air cathodes with asymmetric configurations significantly promote the electrocatalytic efficiency of the loaded electrocatalysts, whereas rational synthetic methodology to effectively fabricate asymmetric air cathodes remains insufficient. Herein, a strategy of asymmetric interface preconstruction is proposed to fabricate asymmetric air cathodes for high-performance rechargeable zinc-air batteries. Concretely, the asymmetric interface is preconstructed by introducing immiscible organic-water diphases within the air cathode, at which the electrocatalysts are in situ formed to achieve an asymmetric configuration. The as-fabricated asymmetric air cathodes realize high working rates of 50 mA cm-2 , long cycling stability of 3400 cycles at 10 mA cm-2 , and over 100 cycles under harsh conditions of 25 mA cm-2 and 25 mAh cm-2 . Moreover, the asymmetric interface preconstruction strategy is universal to many electrocatalytic systems and can be easily scaled up. This work provides an effective strategy toward advanced asymmetric air cathodes with high electrocatalytic efficiency and significantly promotes the performance of rechargeable zinc-air batteries.

Prevalence of mental health problems and associated risk factors among military healthcare workers in specialized COVID-19 hospitals in Wuhan, China: A cross-sectional survey.

INTRODUCTION: China has been severely affected by coronavirus disease 2019 (COVID-19) since December 2019. Military healthcare workers in China have experienced many pressures when combating COVID-19. This study aimed to investigate the current psychological status and associated risk factors among military healthcare workers. METHODS: We collected data from 194 military healthcare workers from three inpatient wards in two specialized COVID-19 hospitals using a web-based cross-sectional survey. The survey covered demographic information, the patient health questionnaire-9, the Generalized Anxiety Disorder-7, and the patient health questionnaire-15. Hierarchical regression analysis was used to explore potential risk factors for mental health problems. RESULTS: The overall prevalence rates of depressive, generalized anxiety, and somatic symptoms were 37.6%, 32.5%, and 50%, respectively. Rates of severe depression, generalized anxiety, and somatic symptoms were 5.2%, 3.6%, and 15.5%, respectively. In 22.7% of cases, comorbidities existed between depression, generalized anxiety, and somatization. A junior-grade professional title was associated with depression, older age was associated with generalized anxiety and somatization, and short sleep duration and poor sleep quality were associated with all three symptoms. DISCUSSION: The prevalence of depression, generalized anxiety, and somatic symptoms among military healthcare workers in specialized COVID-19 hospitals is high during the current COVID-19 outbreak. A junior-grade professional title, older age, short sleep duration, and poor sleep quality significantly affect military healthcare workers' mental health. Continuous surveillance and monitoring of the psychological consequences of the COVID-19 outbreak should be routine to promote mental health among military healthcare workers.

Isotropic Thermoelectric Performance of Layer-Structured n-Type Bi2Te2.7Se0.3 by Cu Doping.

The lamellar structure of (Bi,Sb)2(Te,Se)3 alloys makes it difficult to achieve isotropic thermoelectric properties in the directions along and perpendicular to the c-axis, especially for n-type samples. In this work, by introducing Cu in polycrystalline n-type CuxBi2Te2.7Se0.3 and applying the traditional synthesis process of high-energy ball milling and hot pressing, substantial enhancement of the thermoelectric figure of merit zT is obtained in both in-plane and out-of-plane directions. The intercalated Cu not only provides electron transport media for mobility improvement but also reduces the lattice thermal conductivity owing to the strain fluctuation. Typically, the van der Waals gap in the out-of-plane direction leads to relatively slower mobility and lower lattice thermal conductivity. Taking into account the same average density-of-state effective mass (mavg* ∼ 1.5me) predicted based on a single parabolic model, the obtained quality factor ß is comparable in both directions. As a result, a peak zT ∼ 1.05 at 420 K and the average zT approaching to 1.0 in the temperature range 300-500 K are obtained in both directions for the Cu0. 02Bi2Te2.7Se0.3 sample. The simple synthesis process and isotropic thermoelectric properties in this work make n-type Bi2Te3 more convenient for potential production and application.

Recent advances of noble-metal-free bifunctional oxygen reduction and evolution electrocatalysts.

Oxygen reduction and evolution reactions constitute the core process of many vital energy storage or conversion techniques. However, the kinetic sluggishness of the oxygen redox reactions and heavy reliance on noble-metal-based electrocatalysts strongly limit the energy efficiency of the related devices. Developing high-performance noble-metal-free bifunctional ORR and OER electrocatalysts has gained worldwide attention, where much important progress has been made during the last decade. This review systematically addresses the design principles to obtain high-performance noble-metal-free bifunctional oxygen electrocatalysts by emphasizing strategies of both intrinsic activity regulation and active site integration. A statistical analysis of the reported bifunctional electrocatalysts is further carried out to reveal the composition-performance relationship and guide further exploration of emerging candidates. Finally, perspectives for developing advanced bifunctional oxygen electrocatalysts and aqueous rechargeable metal-air batteries are proposed.

Can Aqueous Zinc-Air Batteries Work at Sub-Zero Temperatures?

Efficient energy storage at low temperatures starves for competent battery techniques. Herein, inherent advantages of zinc-air batteries on low-temperature electrochemical energy storage are discovered. The electrode reactions are resistive against low temperatures to render feasible working zinc-air batteries under sub-zero temperatures. The relatively reduced ionic conductivity of electrolyte is identified as the main limiting factor, which can be addressed by employing a CsOH-based electrolyte through regulating the solvation structures. Accordingly, 500 cycles with a stable voltage gap of 0.8 V at 5.0 mA cm-2 is achieved at -10 °C. This work reveals the promising potential of zinc-air batteries for low-temperature electrochemical energy storage and inspires advanced battery systems under extreme working conditions.

A ΔE = 0.63 V Bifunctional Oxygen Electrocatalyst Enables High-Rate and Long-Cycling Zinc-Air Batteries.

Rechargeable zinc-air batteries constitute promising next-generation energy storage devices due to their intrinsic safety, low cost, and feasibility to realize high cycling current density and long cycling lifespan. Nevertheless, their cathodic reactions involving oxygen reduction and oxygen evolution are highly sluggish in kinetics, requiring high-performance noble-metal-free bifunctional electrocatalysts that exceed the current noble-metal-based benchmarks. Herein, a noble-metal-free bifunctional electrocatalyst is fabricated, which demonstrates ultrahigh bifunctional activity and renders excellent performance in rechargeable zinc-air batteries. Concretely, atomic Co-N-C and NiFe layered double hydroxides (LDHs) are respectively selected as oxygen reduction and evolution active sites and are further rationally integrated to afford the resultant CoNC@LDH composite electrocatalyst. The CoNC@LDH electrocatalyst exhibits remarkable bifunctional activity delivering an indicator ΔE of 0.63 V, far exceeding the noble-metal-based Pt/C+Ir/C benchmark (ΔE = 0.77 V) and most reported electrocatalysts. Correspondingly, ultralong lifespan (over 3600 cycles at 10 mA cm-2 ) and excellent rate performances (cycling current density at 100 mA cm-2 ) are achieved in rechargeable zinc-air batteries. This work highlights the current advances of bifunctional oxygen electrocatalysis and endows high-rate and long-cycling rechargeable zinc-air batteries for efficient sustainable energy storage.

Strong photoperiod sensitivity is controlled by cooperation and competition among Hd1, Ghd7 and DTH8 in rice heading.

Rice (Oryza sativa) is a short-day (SD) plant originally having strong photoperiod sensitivity (PS), with SDs promoting and long days (LDs) suppressing flowering. Although the evolution of PS in rice has been extensively studied, there are few studies that combine the genetic effects and underlying mechanism of different PS gene combinations with variations in PS. We created a set of isogenic lines among the core PS-flowering genes Hd1, Ghd7 and DTH8 using CRISPR mutagenesis, to systematically dissect their genetic relationships under different day-lengths. We investigated their monogenic, digenic, and trigenic effects on target gene regulation and PS variation. We found that Hd1 and Ghd7 have the primary functions for promoting and repressing flowering, respectively, regardless of day-length. However, under LD conditions, Hd1 promotes Ghd7 expression and is recruited by Ghd7 and/or DTH8 to form repressive complexes that collaboratively suppress the Ehd1-Hd3a/RFT1 pathway to block heading, but under SD conditions Hd1 competes with the complexes to promote Hd3a/RFT1 expression, playing a tradeoff relationship with PS flowering. Natural allelic variations of Hd1, Ghd7 and DTH8 in rice populations have resulted in various PS performances. Our findings reveal that rice PS flowering is controlled by crosstalk of two modules - Hd1-Hd3a/RFT1 in SD conditions and (Hd1/Ghd7/DTH8)-Ehd1-Hd3a/RFT1 in LD conditions - and the divergences of these genes provide the basis for rice adaptation to broad regions.

Optimized Strategies for Advancing n-Type PbTe Thermoelectrics: A Review.

p-Type and n-type thermoelectric semiconductor materials with compatible performance are key components for thermoelectric devices. Great improvement in thermoelectric performance has been achieved in p-type PbTe, whereas the n-type counterpart still shows much inferior thermoelectric performance compared to that of the p-type PbTe. This inspires many strategies focused on advancing n-type PbTe thermoelectrics. Herein, not only effective mass engineering, resonance states, point defects, and nanostructures but also newly developed concepts including dynamic doping for stabilizing the optimal carrier concentration and introducing dislocations for reducing lattice thermal conductivity are summarized. In addition, the synergistic effects for further enhancing the thermoelectric performance are outlined, together with a discussion and outlook for boosting the advancement in n-type PbTe thermoelectric materials. Strategies discussed here are expected to be applicable to other thermoelectric materials.

Emerging treatment strategies for breast cancer brain metastasis: from translational therapeutics to real-world experience.

Systemic therapies for primary breast cancer have made great progress over the past two decades. However, oncologists confront an insidious and particularly difficult problem: in those patients with metastatic breast cancer, up to 50% of human epidermal growth factor 2 (HER2)-positive and 25-40% of triple-negative subtypes, brain metastases (BM) kill most of them. Fortunately, standard- of-care treatments for BM have improved rapidly, with a decline in whole brain radiation therapy and use of fractionated stereotactic radiosurgery as well as targeted therapies and immunotherapies. Meanwhile, advances in fundamental understanding of the basic biological processes of breast cancer BM (BCBM) have led to many novel experimental therapeutic strategies. In this review, we describe the most recent clinical treatment options and emerging experimental therapeutic strategies that have the potential to combat BCBM.