RESUMO
Although precise regulation of the crystalline structures of metal oxides is an effective method to improve their antibacterial activities, the corresponding mechanisms involved in this process are still unclear. In this study, three kinds of cuprous oxide (Cu2O) samples with different structures of cubes, octahedra, and rhombic dodecahedra (c-Cu2O, o-Cu2O, and r-Cu2O) have been successfully synthesized and their antibacterial activities are compared. The antibacterial activities follow the order of r-Cu2O > o-Cu2O > c-Cu2O, revealing the significant dependence of the antibacterial activities on the crystalline structures of Cu2O. Quenching experiments, as well as the NBT and DPD experiments indicate that ≡CuIIâOO⢠superoxo and ≡CuIIâOOH peroxo, instead of â¢OH, O2â¢-, and H2O2, are the primary oxidizing species in the oxidative damage to E. coli. Raman analysis further confirms the presence of both ≡CuIIâOO⢠superoxo and ≡CuIIâOOH peroxo on the surface of r-Cu2O. On the other hand, the NCP experiment reveals that Cu+, instead of Cu2+, also contributes to the antibacterial process. This study provides new insight into the antibacterial mechanisms of Cu2O.
RESUMO
Bismaleimide (BMI) is often used as the cross-linking reagent in Diels-Alder (D-A)-type intrinsic self-healing materials (DISMs) to promote the connectivity of damaged surfaces based on reversible D-A bond formation on the molecular scale. Until now, although DISMs have exhibited great potential in the applications of various sensors, electronic skin, and artificial muscles, it is still difficult to prepare DISMs with satisfactory self-healing abilities and high tensile strengths and strains at the same time, thus largely limiting their applications in self-healing anticorrosive coatings. Herein, symmetrical trimaleimide (TMI) was successfully synthesized, and trimaleimide-structured D-A self-healing polyurethane (TMI-DA-PU) was prepared via the reversible D-A reaction (cycloaddition of furan and maleimide). As a DISM, TMI-DA-PU exhibits apparently higher self-healing efficiency (98.7%), tensile strength (25.4 MPa), and strain (1378%) compared to bismaleimide-structured D-A self-healing polyurethane (BMI-DA-PU) (self-healing efficiency, 90.2%; tensile strength, 19.3 MPa; strain, 1174%). In addition, TMI-DA-PU shows a high recycling efficiency (>95%) after 4 cycles of recycling. A series of characterizations indicate that TMI provides more monoene rings as the self-healing sites, forms denser cross-linked structures compared to BMI, and is, thus, more appropriate to be used for DISM applications. Moreover, the barrier abilities of coatings can be semi-quantitatively expressed by the impedance value at 0.01 Hz (|Z|0.01 Hz). The |Z|0.01â¯Hz value of the TMI-DA-PU coating is 3.93 × 109 Ω cm2 on day 0, which is significantly higher than that of the BMI-DA-PU coating (6.76 × 108 Ω cm2 on day 0), indicating that the denser rigid cross-linked structure of TMI results in the small porosity in the TMI-DA-PU coating, thus effectively improving the anticorrosion performance. The construction of DISMs with the structure of TMI demonstrates immense potential in self-healing anticorrosive coatings.
RESUMO
Combining photodynamic antimicrobials with nonwovens is prospective. However, common photosensitizers still have drawbacks such as poor photoactivity and the inability to charge. In this study, a photodynamic and high-efficiency antimicrobial protective material was prepared by grafting bis benzophenone-structured 4,4-terephthaloyl diphthalic anhydride (TDPA) photosensitizer, and antimicrobial agent chlorogenic acid (CA) onto spunbond-meltblown-spunbond (SMS) membranes. The charging rates for ·OH and H2O2 were 6377.89 and 913.52 µg/g/h. The light absorption transients structural storage remained above 69% for 1 month. High electrical capacity remained after seven cycles indicating its rechargeability and recyclability. The SMS/TDPA/CA membrane has excellent bactericidal performance when under illumination or lightless conditions, and the bactericidal efficiency of Escherichia coli and Staphylococcus aureus reached over 99%. The construction of self-disinfection textiles based on the photodynamic strategies proposed in this paper is constructive for expanding and promoting the application of textile materials in the medical field.
RESUMO
Photocatalytic technology is a popular research area for converting solar energy into environmentally friendly chemicals and is considered the greenest approach for producing H2O2. However, the corresponding reactive oxygen species (ROS) and pathway involved in the photocatalytic generation of H2O2 by the Bi2.15WO6-glucose system are still not clear. Quenching experiments have established that neither â¢OH nor h+ contribute to the formation of H2O2, and show that the formed surface superoxo (≡Bi-OOâ¢) and peroxo (≡Bi-OOH) species are the predominant ROS in H2O2 generation. In addition, various characterizations indicate the enhanced electron-transfer on the surface of Bi2.15WO6 with increasing contents of glucose via the ligand-to-metal charge transfer pathway, confirming H-transfer from glucose to ≡Bi-OO⢠or ≡Bi-OOH. The increased production of H2O2 with decreasing bond dissociation energy (BDEO-H) values of various phenolic compounds again supports the H-transfer mechanism from phenolic compounds to ≡Bi-OO⢠and then to ≡Bi-OOH. DFT calculations further reveal that on the Bi2.15WO6 surface, oxygen is sequentially reduced to ≡Bi-OO⢠and ≡Bi-OOH, while H-transfer from H2O or glucose to ≡Bi-OO⢠and ≡Bi-OOH, resulting in the production of H2O2. The lower energy barrier of H-transfer from adsorbed glucose (0.636 eV) than that from H2O (1.157 eV) indicates that H-transfer is more favorable from adsorbed glucose. This work gives new insight into the photocatalytic generation of H2O2 by Bi2.15WO6 in the presence of glucose/phenolic compounds via the H-abstraction pathway.
RESUMO
Bone tissue engineering scaffolds should have bone compatibility, biological activity, porosity, and degradability. In this study, flake-like hydroxyapatite was synthesized by hydrothermal method and mixed with sodium alginate to make a gel, which was injected into a hollow braid. Porous and degradable SA/n-Hap woven scaffolds were prepared by freeze-drying technology. The morphology of hydroxyapatite was characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and x-ray diffraction. The scaffolds were characterized by an improved liquid replacement method, compression test, and degradation test. The results showed that the hydroxyapatite synthesized at 160 °C had a scaly morphology. The prepared scaffold had a pore size of 5-100 µm, a porosity of 60%-70%, and a swelling rate of more than 300%. After 21 d the degradation rate reached 5.54%, and a cell survival rate of 214.98%. In summary, it is feasible to prepare porous bone scaffolds for potential bone tissue engineering. This study shows the feasibility of applying textile structures to the field of tissue scaffolds and provides a new idea for the application structure of tissue engineering scaffolds.
Assuntos
Durapatita , Engenharia Tecidual , Engenharia Tecidual/métodos , Durapatita/química , Alicerces Teciduais/química , Osso e Ossos , Difração de Raios X , Porosidade , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
When impaired bones are grafted with bone scaffolds, the behaviors of osteoblast are dependent on the implant materials and surface morphology. To this end, we modulated the surface morphology of scaffolds that promote cell growth. In this study, ice-template and spraying method methods are employed to coat different proportions of PDA and PPy over the PLA/PVA weaving scaffolds, after which HA is Coated over via the electrochemical deposition, forming weaving scaffolds with electrically conductive PDA/PPy/HA coating. The test results indicate that with a PPy/PDA concentration ratio is 30, the PPy particles are more uniformly distributed on the fiber surface. The scaffolds are wrapped in a HA coating layer with a high purity, and calcium and phosphorus elements are evenly dispersed with a Ca/P ratio being 1.69. Owing to the synergistic effect between PDA and PPy coating, the scaffolds demonstrate excellent electrochemical stability and electrochemical activity. The biological activity of the scaffold increased to 274.66% under electrical stimulation. The new thinking proposed by this study extends the worth of applying textile structure to the medical field, the application of which highly increases the prospect of bone tissue engineering.
Assuntos
Durapatita , Polímeros , Polímeros/química , Durapatita/química , Pirróis/química , Engenharia Tecidual , Alicerces Teciduais/química , Condutividade ElétricaRESUMO
In harsh environments, it is crucial to design personal protective materials that possess both puncture/cut resistance and chemical resistance. In order to fulfill these requirements, this study introduces an innovative approach that combines hydrophobically modified rigid nanoparticles with thermoplastic polyurethane elastomers. These materials are then laminated with high-performance aramid fabrics through a scraping process, resulting in a multifunctional composite with puncture/cut resistance, superhydrophobicity, self-cleaning properties, and acid/alkali resistance. The quasi-static puncture tests conducted reveal the remarkable performance of the composite. The maximum spike puncture resistance reaches 267.62 N, which is 17.14 times higher than that of the pure fabric (15.61 N). Similarly, the maximum knife puncture resistance reaches 115.02 N, exhibiting a 5.01 times increase compared to that of the pure aramid fabric (22.97 N). Furthermore, the results obtained from the yarn pull-out, fabric burst strength, and tearing experiments demonstrate that the incorporation of rigid nanoparticles significantly enhances the friction between the yarns, enabling a greater number of yarns to participate in the dissipation of impact energy. As a result, the puncture resistance of the fabric is greatly improved. Significantly, the composite exhibits sustained superhydrophobicity even after exposure to harsh chemicals such as concentrated sulfuric acid and sodium hydroxide as well as undergoing cyclic mechanical wear. These findings highlight the composite's exceptional durability and resistance to corrosion. Overall, this study offers insights and methods for the development of multifunctional flexible puncture-resistant equipment for individuals.
RESUMO
This study designed a novel co-electrospun cellulose acetate (CA)/thermoplastic polyurethane (TPU) photodynamic helical fiber antibacterial membrane as a potential environmentally friendly medical protective material. A central combined design method (CCD) based on response surface methodology (RSM) was used to analyze essential variables' influence. The optimized parameters for CCD were TPU (wt%) 11.68 %, CA (wt%) 13.89 %, DMAc/ACE volume ratio 0.147, LiCl (wt%) 1.39 %, and voltage (kV) 14.43 V. Pitch and pitch diameter were the response process as the critical output variable. The membranes were characterized by SEM, TG, FT-IR, and molecular structure analysis. The results showed that the photodynamic helical fiber antimicrobial membrane exhibited synergistic effects of the antibacterial photodynamic therapy (APDT) and antimicrobial agent under average daylight irradiation. The release rate of -OH was 98.22 %, and H2O2 was 88.36 % under the action of 20 min of light. The bactericidal rates of S. aureus and E. coli reached 99.9 % and 99.7 %, respectively. The fiber helical structure can increase the light absorption rate, thus increasing the release rate and amount of reactive oxygen species (ROS) species, increasing the antibacterial rate. After washing five times, the antibacterial membrane has excellent antibacterial performance and a dark antibacterial effect.
Assuntos
Escherichia coli , Poliuretanos , Poliuretanos/farmacologia , Poliuretanos/química , Staphylococcus aureus , Espectroscopia de Infravermelho com Transformada de Fourier , Biomimética , Peróxido de Hidrogênio/farmacologia , Antibacterianos/farmacologia , Antibacterianos/químicaRESUMO
Although the photocatalytic reduction of Cr(VI) to Cr(III) by traditional powder photocatalysts is a promising method, the difficulty and poor recovery of photocatalysts from water hinder their wide practical applications. Herein, we present that FeC2O4/Bi2.15WO6 (FeC2O4/BWO) composites were tightly bonded to modified polyvinylidene fluoride (PVDF) membranes by chemical grafting with the aid of polyvinyl alcohol (PVA) to form photocatalytic composite membranes (PVDF@PVA-FeC2O4/BWO). The contact angle of PVDF@PVA-FeC2O4/BWO (0.06 wt % of FeC2O4/BWO) is 48.0°, which is much lower than that of the pure PVDF membrane (80.5°). Meanwhile, the permeate flux of 61.43 g m-2 h-1 and water flux of 250.60 L m-2 h-1 were observed for PVDF@PVA-FeC2O4/BWO composite membranes. The tensile strength of composite membranes reached 48.84 MPa, which was 9.8 times higher than that of PVDF membrane. It was found that the PVDF@PVA-FeC2O4/BWO membrane exhibited excellent photocatalytic Cr(VI) reduction performance under both simulated and real sunlight irradiation. The adsorption for Cr(VI) by PVDF@PVA-FeC2O4/BWO can reach 47.6% in the dark process within 30 min, and the removal percentage of Cr(VI) could reach 100% with a rate constant k value of 0.2651 min-1 after 10 min of light exposure, indicating a synergistic effect of adsorption and photoreduction for Cr(VI) removal by the composite membrane. The PVDF@PVA-FeC2O4/BWO membrane had good stability and reusability after seven consecutive cycles. Most importantly, the influences of foreign ions on Cr(VI) reduction were investigated to mimic real sewage, which revealed that no obvious adverse effects can be found with the presence of common foreign ions in sewage. The photocatalytic membrane material developed in this study provides a new idea for treating Cr(VI)-containing wastewater and has a more significant application prospect.
RESUMO
BACKGROUND: Spinal muscular atrophy (SMA) and amyotrophic lateral sclerosis (ALS) were two major motor neuron diseases with similar symptoms and poor outcomes. This study aimed to identify potential biomarkers in disease monitoring and differential diagnosis of adult SMA patients with sporadic ALS patients. METHODS: This was a pilot study with ten adult SMA patients and ten ALS patients consecutively enrolled during hospitalization. Serum and cerebrospinal fluid (CSF) samples were collected for assessment of neurofilament light (NFL) and phosphorylated neurofilament heavy chain (pNFH). Serum creatine kinase (CK) and creatinine (Cr) were also compared between groups. The receiver operating characteristic (ROC) curves were used to identify differentiated values among ALS and SMA patients. RESULTS: Serum Cr, CSF NFL, and CSF pNFH levels of ALS patients were significantly higher than those of the adult SMA patients (p < .01). Serum CK and Cr were strongly correlated with baseline ALSFRS-R scores in SMA patients (p < .001). The ROC curves revealed an area under the curve (AUC) of 0.94 in serum Cr with a cut-off value of 44.5 µmol/L (Sensitivity 90%, Specificity 90%). AUC from the ROC curve of CSF NFL and CSF pNFH were 1.0 and 0.84, with cut-off values of 1275 pg/mL and 0.395 ng/mL, respectively (Sensitivity and Specificity of 100% and 100% in CSF NFL; Sensitivity and Specificity of 90% and 80% in CSF pNFH). CONCLUSION: CSF NFL and pNFH might be useful biomarkers for differential diagnosis of adult SMA and ALS.
Assuntos
Esclerose Lateral Amiotrófica , Atrofia Muscular Espinal , Adulto , Humanos , Esclerose Lateral Amiotrófica/diagnóstico , Projetos Piloto , Filamentos Intermediários , Proteínas de Neurofilamentos/líquido cefalorraquidiano , Atrofia Muscular Espinal/diagnóstico , BiomarcadoresRESUMO
OBJECTIVE: To investigate aquaporin-4 antibody (AQP4-IgG) dynamics and relapse risk in patients with seropositive neuromyelitis optica spectrum disorder treated with immunosuppressants. METHODS: This observational cohort study with prospectively collected data included 400 neuromyelitis optica spectrum disorder patients seropositive for AQP4-IgG and treated with immunosuppressants. Serum AQP4-IgG was detected by fixed cell-based assay every 6 months. RESULTS: After treatment with immunosuppressants, 128 patients became AQP4-IgG seronegative. The median time to become seronegative for 400 patients was 76.4 months (61.4 months, NA). Among those patients with negative change of AQP4-IgG, the mean annualized relapse rate significantly decreased after patients became seronegative (0.20 vs 0.77, p < 0.001), and a positive correlation was observed between time to become seronegative and relapse (OR 1.018, 95% CI 1.001-1.035, p < 0.05). Independent risk factors for AQP4-IgG becoming seronegative were older age at onset, initiation of immunosuppressants at onset, and shorter disease duration before maintenance therapy. Independent risk factors for relapse included younger age (≤46.4 years) at onset, poly-system involvement in the first attack, and unchanged or increased AQP4-IgG titer. The relapse risk was not associated with sex, combination with connective tissue disease, seropositivity for systemic autoimmune antibodies, or incomplete recovery from the first attack. INTERPRETATION: Patients with younger age at onset, poly-system involvement in the first attack, and unchanged or increased titer of AQP4-IgG are most likely to experience relapse under treatment with immunosuppressants. Time to AQP4-IgG becoming seronegative and change of AQP4-IgG titer may become the surrogate efficacy biomarkers in clinical trials. ANN NEUROL 2023;93:1069-1081.
Assuntos
Neuromielite Óptica , Humanos , Pessoa de Meia-Idade , Imunossupressores/uso terapêutico , Aquaporina 4 , Autoanticorpos , Doença Crônica , Biomarcadores , Recidiva , Imunoglobulina GRESUMO
In this work, TiO2 nanofiber membrane (NFM) with a complete surface microstructure was prepared through regulating the surface microstructure of TiO2 NFM by doping Zr. The crystal structures and morphological analyses indicated that the nanofiber membranes were consisted by disordered accumulation of Zr-doped TiO2 nanofibers with a crack-free surface, small grain size and high aspect ratio. When the doping amount of Zr was 0.8 mL, the tensile strength of the doped membranes reached 1.27 MPa, which was 60.7% higher than that of pure TiO2 NFM. The photocatalytic performance of Zr-doped TiO2 NFM was evaluated by the degradation performance of Methylene orange (MO) under simulated sunlight irradiation. Compared with the undoped TiO2 NFM, the 0.8-Zr/TiO2 NFM presented a higher catalytic degradation efficiency (improved by 69.6%), and the photocatalytic performance maintained stable after five circulating. It was found that the doping of Zr ions effectively limited the surface crack size and grain size of TiO2 nanofibers, thereby improving the tensile strength, and enhanced the surface area effect and carrier transfer efficiency of TiO2 NFM. On the other hand, a narrow band-gap was obtained by doping a small amount of Zr ions, which expanded the visible light response range to improve the photocatalytic performance of TiO2 nanofibers.
Assuntos
Nanofibras , Nanofibras/química , Luz , Titânio/químicaRESUMO
Removal of organic solvents and heavy metals in effluents is of great significance to environmental pollution control and ecological civilization construction. pH-responsive materials have unique advantages in treating complicated oily wastewater. In this work, an intelligent pH-responsive nonwoven fabric with excellent reversible wettability was prepared. The pH-sensitive polymer was synthesized by free radical polymerization (FRP) technique, then dipped with SiO2 on PP fabric. The particular molecular structure of poly (dimethylaminoethyl methacrylate) (PDMAEMA) enabled the fabric surface to switch wettability rapidly between hydrophilic/underwater oleophobic and oleophobic/hydrophobic under pH stimulus and exhibit controllable selective separation of various oil/water mixtures. Furthermore, the fabric removed Pb2+ efficiently under a wide pH range. The experimetal results showed that the separation flux reached 19,229 ± 1656.43 L-h-1-m-2 for water and 19,342 ± 1796.77 L-m-2-h-1 for n-hexane. Besides, the obtained fabric effectively realized the separation and collection process of complex ternary mixtures. The fabric removed Pb2+ in solutions with efficiency up to 90.83%. After immersing in acid and alkali solutions for 24 h, no significant damage to the surface wettability. This economical and intelligent fabric is able to meet the different separation purposes of industrial wastewaters with complex compositions.
Assuntos
Metais Pesados , Águas Residuárias , Álcalis , Concentração de Íons de Hidrogênio , Chumbo , Metacrilatos , Polímeros , Dióxido de Silício , Solventes , Águas Residuárias/química , MolhabilidadeRESUMO
Photooxidation of As(III) by TiO2 is a complicated process in which the oxidation mechanisms are always controversial. In this study, the enhanced photooxidation rates of As(III) with increasing pH values from 8.0 to 11.0 indicate the high photocatalytic reactivity of TiO2 under alkaline conditions. Moreover, As(III) improves the production of H2O2, indicating H-abstraction from As(III) (soluble or adsorbed) for H2O2 production. Although O2Ë-, h+, ËOH and -OOH are always regarded as the reactive oxygen species in the UV-TiO2 system, the superoxo and peroxo species formed on the surface of TiO2 also contribute to As(III) oxidation. The As(III)-O-Ti(IV) surface complexes formed on TiO2, as well as the decreased bandgaps of TiO2 with increasing concentrations of As(III) indicate that the ligand-to-metal charge transfer (LMCT) pathway also contributes to the oxidation of As(III) under alkaline conditions. Electrochemical analyses further reveal that As(III) enhances the electron density on the surface of TiO2, thereby improving the catalytic reactivity of TiO2. We therefore suggest that H-abstraction from As(III) or H2O to the formed superoxo and peroxo species results in the formation of H2O2, accompanied by the oxidation of As(III). This enriches our knowledge on the oxidation of As(III), as well as other contaminants rich in -OH groups during the photocatalytic oxidation processes.
Assuntos
Arsenitos , Arsenitos/química , Peróxido de Hidrogênio/química , Ligantes , Metais , Titânio/químicaRESUMO
Biotic and abiotic oxidation of Mn(II) in aqueous environments is an important process for the cycling of many elements. However, the mechanism involved in photocatalytic oxidation of Mn(II) has not been clearly elucidated yet. In this study, the photocatalytic oxidation of Mn(II) on the surface of self-doped Bi2+xWO6 (Bi2.15WO6) under visible light was conducted. Kinetics results show that visible light apparently accelerates the oxidation of Mn(II) to Mn(III, IV) oxides on Bi2.15WO6. The average oxidation states (AOS) of manganese reach 2.18 after 80 min of reaction under visible light at pH 8.50. Characterizations indicate the formation of Bi(III)-O-Mn(II) surface complexes between Mn(II) and surface Bi(III) on Bi2.15WO6, which then decreases the bandgap of [Bi2.15WO6 + Mn(II)]light (2.53 eV) compared with those of [Bi2.15WO6 + Mn(II)]dark (2.72 eV) and pure Bi2.15WO6 (2.86 eV), suggesting the contribution of the ligand-to-metal charge transfer (LMCT) pathway to the photocatalytic oxidation of Mn(II). Moreover, the addition of inorganic oxidants with strong oxidizing capacities (such as Cr2O72-, NO3- or NO2-) significantly increases the oxidation rate of Mn(II), further verifying the contribution of the LMCT pathway to Mn(II) oxidation. We therefore suggest that the LMCT pathway is one of the important oxidation routes for Mn(II) oxidation on Bi2.15WO6 under visible light.
RESUMO
Micro-nano bubbles (MNBs) play important roles in the reduction of membrane fouling during membrane separation; however, such improvements are always attributed to the reduced concentration polarization on the surface of membranes and little attention has been paid on the variations of physicochemical properties of the feed caused by MNBs. In this study, the separation efficiencies of the feed containing humic acid (HA), bovine serum albumin (BSA), sodium alginate (SA) or dyes can be improved by MNBs during ultrafiltration, and the normalized fluxes can be maximally increased to 139% and 127% in the dead-end and cross-flow modes, respectively in the treatment of HA solution. We further reveal that the decreased apparent viscosity of the feed in the presence of MNBs is the key factor that enhances the normalized flux during ultrafiltration. This study gives new insight on the importance of MNBs in membrane separation and provides valuable clues for other chemical processes.
Assuntos
Ultrafiltração , Purificação da Água , Substâncias Húmicas , Membranas Artificiais , ViscosidadeRESUMO
Although synthesis of oligoaniline (OANI) by persulfate and aniline has been investigated in the recent years, the impact of phenol on the synthesized soluble OANI is still not clear. In this study, our results indicate that phenol and pH mediate the production of the blue water-soluble OANI (OANIblue) in the reaction between sodium persulfate (SPS) and aniline under alkaline conditions, and the yields of OANIblue increase with increasing concentrations of phenol and pH values. Quenching experiments rule out the contributions of SO4Ë- and ËOH to aniline oxidation and imply that the non-radical activation of SPS is an important pathway in the formation of OANIblue. MALDI-TOF-MS analysis indicates that phenol apparently inhibits the polymerization degree of aniline in that the molecular weights of OANIblue gradually decrease from 1586.4 to 684.6 when phenol is increased from 0 to 2.0 mM. FTIR and Raman analyses confirm the structure of aniline oligomers in OANIblue and indicate that phenol inhibits the phenazine-like structure in OANIblue and facilitates the transformation of benzenoid rings to quinoid rings in the oxidation products. However, simultaneous activation of SPS by phenol and aniline is likely to occur in the reaction system with the formation of PhNHË, as indicated by DFT calculations. The high scavenging reactivity of phenol towards both PhNH2Ë+ and PhNHË implies that PhNH2Ë+ and PhNHË are not the intermediates in the formation of OANIblue. DFT calculations also reveal that apart from the one-electron transfer pathway between aniline and SPS, the two-electron transfer pathway is also likely to occur in the presence of phenol, resulting in the formation of PhNH+/PhNËË without producing PhNH2Ë+ and PhNHË. The produced PhNH+/PhNËË intermediates then couple with aniline, PhNH+, aminophenyl sulfate and its hydrolysate to form dimers, trimers, oligomers, and eventually OANIblue. This study not only describes a novel method to prepare water-soluble OANI, but also gives new insight on the importance of phenol in the production of OANIblue.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Compostos de Anilina/química , Oxirredução , Fenol/química , Fenóis , Sulfatos/química , Água , Poluentes Químicos da Água/química , Purificação da Água/métodosRESUMO
In this study, two natural clay minerals were combined with hydrogels to study the influence of natural adsorbents on the adsorption performance of hydrogels. Here, we separately doped bentonite and vermiculite and discussed their mechanical properties and adsorption properties. It was found that the compressive performance of the hydrogel added with clay increased by 21.6% and the swelling performance decreased or increased to varying degrees. Regarding the adsorption performance of hydrogels, it can be seen from the adsorption Langmuir isotherm model that the adsorption capacity of clay-hydrogels is improved to varying degrees (6.6%-15.8%) compared with non-clay-hydrogels, and clay-hydrogels have different degrees of improvement (6.6%-15.8%). The hydrogel has a removal efficiency of more than 95% for low concentrations of heavy-metal ions and dyes. In addition, the clay-hydrogel has low cost and is easy to prepare, and can be recycled many times. Therefore, the material is of great significance for the treatment of pollutants. PRACTITIONER POINTS: The effect of natural clay on the adsorption performance of hydrogels was studied. Clay can enhance the compression and adsorption properties of hydrogels. The adsorption mechanism and adsorption capacity of clay hydrogels were evaluated.
Assuntos
Águas Residuárias , Poluentes Químicos da Água , Adsorção , Argila , Corantes , Hidrogéis , Íons , Têxteis , Poluentes Químicos da Água/análiseRESUMO
Photocatalytic reduction of Cr(VI) in water environments attracts more attention; however, the mechanisms involved in this process have not been clearly elucidated yet. In this study, the photocatalytic reduction of Cr(VI) by polydopamine modified Bi2.15WO6 (PDA/BWO) under visible light was conducted. Kinetics results show that PDA apparently accelerates the reduction of Cr(VI). The quasi-first-order kinetic constant of Cr(VI) reduction by 5PDA/BWO is 70.0 times that of the original BWO, reaching 0.070 min-1. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Raman analyses confirm the formation of ligand-to-metal charge transfer (LMCT) complex [Bi(III)OC] between PDA and BWO. The formed Bi(III)OC complex enhances visible light response and narrows the bandgap of PDA/BWO. The photoelectrochemical and photoluminescent characterization further reveals that the formed Bi(III)OC complex inhibits the recombination of carriers, thus enhancing the photocatalytic reactivity of PDA/BWO. Electrons, are derived from three paths, including dye sensitization, LMCT and bandgap excitation, contribute to Cr(VI) reduction by PDA/BWO. This study provides new insights on the paths of Cr(VI) reduction by PDA/BWO under visible light.
Assuntos
Cromo , Cromo/química , Indóis , Ligantes , Oxirredução , PolímerosRESUMO
Drug delivery technology can prevent wound infection and inflammatory reactions and accelerate wound healing and quality. In this paper, we propose preparing a multifunctional medical dressing to meet the various needs of people for dressing. A multi-layered composite nanofiber membrane was constructed using silk fibroin as the substrate, and mesoporous silica nanoparticles (MSN) with high adsorption properties were first prepared and then electrosprayed on silk fibroin (SF)/chitosan (CS) microspheres to form MSN-SF/CS microspheres with uniform distribution. Then the MSN-SF/CS microspheres were sprayed on the silk fibroin (SF)/polycaprolactone (PCL)-polyvinyl alcohol (PVA) unidirectional water-conducting composite nanofiber membrane. The test results showed that the encapsulation rate of bovine serum albumin (BSA) by MSN-SF/CS drug-loaded microspheres was 65.53% and the cumulative release rate in vitro was 54.46%. The results of in vitro experiments also showed its good antibacterial effect and good biocompatibility. To eliminate excess wound exudate and reduce inflammation, the cumulative unidirectional transport capacity (AOTC) of 651.75% was achieved by spraying the microspheres on an SF/PCL- PVA unidirectional water conductive composite membrane. This study could stimulate and promote the use of additional wound healing biomaterials in clinical medicine.