Structure Low Dimensionality and Lone-Pair Stereochemical Activity: the Key to Low Thermal Conductivity in the Pb-Sn-S System.

Recently, metal sulfides have begun to receive attention as potential cost-effective materials for thermoelectric applications beyond optoelectronic and photovoltaic devices. Herein, based on a comparative analysis of the structural and transport properties of 2D PbSnS2 and 1D PbSnS3, we demonstrate that the intrinsic effects that govern the low lattice thermal conductivity (κL) of these sulfides originate from the combination of the low dimensionality of their crystal structures with the stereochemical activity of the lone-pair electrons of cations. The presence of weak bonds in these materials, responsible for phonon scattering, results in inherently low κL of 1.0 W/m K in 1D PbSnS3 and 0.6 W/m K in 2D PbSnS2 at room temperature. However, the nature of the thermal transport is quite distinct. 1D PbSnS3 exhibits a higher thermal conductivity with a crystalline-like peak at low temperatures, while 2D PbSnS2 demonstrates glassy thermal conductivity in the entire temperature range investigated. First-principles density functional theory calculations reveal that the presence of antibonding states below the Fermi level, especially in PbSnS2, contributes to the very low κL. In addition, the calculated phonon dispersions exhibit very soft acoustic phonon branches that give rise to soft lattices and very low speeds of sounds.

Three-Fold Coordination of Copper in Sulfides: A Blockade for Hole Carrier Delocalization but a Driving Force for Ultralow Thermal Conductivity.

Copper-rich sulfides are very promising for energy conversion applications due to their environmental compatibility, cost effectiveness, and earth abundance. Based on a comparative analysis of the structural and transport properties of Cu3BiS3 with those of tetrahedrite (Cu12Sb4S13) and other Cu-rich sulfides, we highlight the role of the cationic coordination types and networks on the electrical and thermal properties. By precession-assisted 3D electron diffraction analysis, we find very high anisotropic thermal vibration of copper attributed to its 3-fold coordination, with an anisotropic atomic displacement parameter up to 0.09 Å2. Density functional theory calculations reveal that these Cu atoms are weakly bonded and give rise to low-energy Einstein-like vibrational modes that strongly scatter heat-carrying acoustic phonons, leading to ultralow thermal conductivity. Importantly, we demonstrate that the 3-fold coordination of copper in Cu3BiS3 and in other copper-rich sulfides constituted of interconnected CuS3 networks causes a hole blockade. This phenomenon hinders the possibility of optimizing the carrier concentration and electronic properties through mixed valency Cu+/Cu2+, differently from tetrahedrite and most other copper-rich chalcogenides, where the main interconnected Cu-S network is built of CuS4 tetrahedra. The comparison with various copper-rich sulfides demonstrates that seeking for frameworks characterized by the coexistence of tetrahedral and 3-fold coordinated copper is very attractive for the discovery of efficient thermoelectric copper-rich sulfides. Considering that lattice vibrations and carrier concentration are key factors for engineering transport phenomena (electronic, phonon, ionic, etc.) in copper-rich chalcogenides for various types of applications, our findings improve the guidelines for the design of materials enabling sustainable energy solutions with wide-ranging applications.

From K6[Re6-xMoxS8(CN)5] Solid Solution to Individual Cluster Complexes: Separation and Investigation of [Re4Mo2S8(CN)6]n- and [Re3Mo3S8(CN)6]n- Heterometallic Clusters.

A series of new cluster compounds with {Re4Mo2S8} and {Re3Mo3S8} cores has been obtained and investigated. The clusters with different Re/Mo ratios were isolated as individual compounds, which made it possible to study their spectroscopic and electrochemical properties. The geometry of the new clusters was studied using a combination of X-ray diffraction analysis, XAS and quantum chemical DFT calculations. It was shown that the properties of the new clusters, such as the number and position of electrochemical transitions, electronic structure and change in geometry with a change in charge, are similar to the properties of clusters based on the {Re4Mo2Se8} and {Re3Mo3Se8} cores described earlier.

Enhanced NH3 Sensing Performance of Mo Cluster-MoS2 Nanocomposite Thin Films via the Sulfurization of Mo6 Cluster Iodides Precursor.

The high-performance defect-rich MoS2 dominated by sulfur vacancies as well as Mo-rich environments have been extensively studied in many fields, such as nitrogen reduction reactions, hydrogen evolution reactions, as well as sensing devices for NH3, which are attributed to the under-coordinated Mo atoms playing a significant role as catalytic sites in the defect area. In this study, the Mo cluster-MoS2 composite was creatively synthesized through a one-step sulfurization process via H2/H2S gas flow. The Mo6 cluster iodides (MIs) coated on the fluorine-doped tin oxide (FTO) glass substrate via the electrophoretic deposition method (i.e., MI@FTO) were used as a precursor to form a thin-film nanocomposite. Investigations into the structure, reaction mechanism, and NH3 gas sensing performance were carried out in detail. The results indicated that during the gas flowing, the decomposed Mo6 cluster iodides played the role of template and precursor, forming complicated Mo cluster compounds and eventually producing MoS2. These Mo cluster-MoS2 thin-film nanocomposites were fabricated and applied as gas sensors for the first time. It turns out that after the sulfurization process, the response of MI@FTO for NH3 gas increased three times while showing conversion from p-type to n-type semiconductor, which enhances their possibilities for future device applications.

A review on functional nanoarchitectonics nanocomposites based on octahedral metal atom clusters (Nb6, Mo6, Ta6, W6, Re6): inorganic 0D and 2D powders and films.

This review is dedicated to various functional nanoarchitectonic nanocomposites based on molecular octahedral metal atom clusters (Nb6, Mo6, Ta6, W6, Re6). Powder and film nanocomposites with two-dimensional, one-dimensional and zero-dimensional morphologies are presented, as well as film matrices from organic polymers to inorganic layered oxides. The high potential and synergetic effects of these nanocomposites for biotechnology applications, photovoltaic, solar control, catalytic, photonic and sensor applications are demonstrated. This review also provides a basic level of understanding how nanocomposites are characterized and processed using different techniques and methods. The main objective of this review would be to provide guiding significance for the design of new high-performance nanocomposites based on transition metal atom clusters.

Nanoarchitectonics of Glass Coatings for Near-Infrared Shielding: From Solid-State Cluster-Based Niobium Chlorides to the Shaping of Nanocomposite Films.

The high potential of [{Nb6Cli12}La6] cluster-based building blocks as near-infrared radiation blockers for energy saving applications is exposed in the present paper (i = inner edge-bridging ligand, a = apical ligand of the Nb6; L = H2O and/or Cl). To do so, a combined experimental and theoretical investigation of edge-bridged [{Nb6Cli12}Cla6-x(H2O)x]m+/0/n- cluster unit series (x = 0, 4, 6; m = 2, 3, 4; n = 2, 3, 4) has been carried out. By using the K4[{Nb6Cli12}Cla6] starting solid-state precursor, we explored the behavior of the [{Nb6Cli12}Cla6]4- cluster unit during the different steps of its integration as a building block into a polyvinylpyrrolidone (PVP) matrix to form a glass coating composite denoted {Nb6Cli12}m+@PVP (m = 2 or 3). The optical, vibrational and redox properties [{Nb6Cli12}Cla6-x(H2O)x]m+/0/n- building blocks have been interpreted with the support of electronic structure calculations and simulation of properties. The chemical modifications and oxidation properties have been identified and studied thanks to various techniques in solution. Combining Raman and ultraviolet-visible spectroscopies, electrochemistry, and quantum chemical simulations, we bring new knowledge to the understanding of the evolution of the properties of the [{Nb6Cli12}Cla6-x(H2O)x]m+/0/n- cluster units as a function of the number of valence electron per cluster (VEC) and the nature of terminal ligands (x = 0, n = 4; x = 4, charge = 0; x = 6, m = 4). The fine understanding of the physical properties and vibrational fingerprints depending on the VEC and chemical modifications in solution are mandatory to master the processing of cluster-based building blocks for the controlled design and shaping of glass coating nanocomposites. On the basis of this acquired knowledge, [{Nb6Cli12}Cla6-x(H2O)x]m+/0/n- building blocks were embedded in a PVP matrix. The resulting {Nb6Cli12}2+@PVP nanocomposite film shows excellent ultraviolet (UV, 280-380 nm) and near-infrared (NIR, 780-1080 nm) blocking ability (>90%) and a highly visible light transmittance thanks to the controlled integration of the {Nb6Cli12}2+ cluster core. The figures of merit (FOM) value of Tvis/Tsol (Tvis = visible transmittance and Tsol = solar transmittance) as well as the haze, clarity, and the NIR shielding values (SNIR) were measured. After optimization of the integration process, a {Nb6Cli12}2+@PVP nanocomposite on glass substrate has been obtained with a high FOM equal to 1.29. This high value places the transparent green olive {Nb6Cli12}2+@PVP nanocomposites at the top system in the benchmark in the field of glass coating composites for energy-saving applications.

A Tunable Structural Family with Ultralow Thermal Conductivity: Copper-Deficient Cu1-x□xPb1-xBi1+xS3.

Understanding the mechanism that connects heat transport with crystal structures and order/disorder phenomena is crucial to develop materials with ultralow thermal conductivity (κ), for thermoelectric and thermal barrier applications, and requires the study of highly pure materials. We synthesized the n-type sulfide CuPbBi5S9 with an ultralow κ value of 0.6-0.4 W m-1 K-1 in the temperature range 300-700 K. In contrast to prior studies, we show that this synthetic sulfide does not exhibit the ordered gladite mineral structure but instead forms a copper-deficient disordered aikinite structure with partial Pb replacement by Bi, according to the chemical formula Cu1/3□2/3Pb1/3Bi5/3S3. By combining experiments and lattice dynamics calculations, we elucidated that the ultralow κ value of this compound is due to very low energy optical modes associated with Pb and Bi ions and, to a smaller extent, Cu. This vibrational complexity at low energy hints at substantial anharmonic effects that contribute to enhance phonon scattering. Importantly, we show that this aikinite-type sulfide, despite being a poor semiconductor, is a potential matrix for designing novel, efficient n-type thermoelectric compounds with ultralow κ values. A drastic improvement in the carrier concentration and thermoelectric figure of merit have been obtained upon Cl for S and Bi for Pb substitution. The Cu1-x□xPb1-xBi1+xS3 series provides a new, interesting structural prototype for engineering n-type thermoelectric sulfides by controlling disorder and optimizing doping.

Evidence of the Ambipolar Behavior of Mo6 Cluster Iodides in All-Inorganic Solar Cells: A New Example of Nanoarchitectonic Concept.

Ambipolar materials such as carbon nanotubes, graphene, or 2D transition metal chalcogenides are very attractive for a large range of applications, namely, light-emitting transistors, logic circuits, gas sensors, flash memories, and solar cells. In this work, it is shown that the nanoarchitectonics of inorganic Mo6 cluster-based iodides enable to form thin films exhibiting photophysical properties that enable their classification as new members of the restricted family of ambipolar materials. Thus, the electronic properties of the ternary iodide Cs2[{Mo6I8i}I6a] and those of thin films of the aqua-complex-based compound [{Mo6I8i}I4a(H2O)2a]·xH2O were investigated through an in-depth photoelectrochemical study. Once hole/electron pairs are created, the holes and electrons turn to be transported simultaneously in opposite directions, and their lifetimes exhibit similar values. The ambipolar properties were demonstrated via the integration of [{Mo6I8i}I4a(H2O)2a]·xH2O as light harvesters in an all-solid solar cell. A significant photoresponse with a typical diode characteristic clearly provides evidence of the simultaneous transfer and transport of holes and electrons within the [{Mo6I8i}I4a(H2O)2a]·xH2O layer. The ambipolar behavior results, on the one hand, from the confinement of electrons imposed by the nanometric size of the molecular metal clusters and, on the other hand, from the poor electronic interactions between clusters in the solid state. Such molecular structure-based layers lead naturally to an intrinsic semiconducting behavior.

Revisiting properties of edge-bridged bromide tantalum clusters in the solid-state, in solution and vice versa: an intertwined experimental and modelling approach.

Edge-bridged halide tantalum clusters based on the {Ta6Br12}4+ core have been the topic of many physicostructural investigations both in solution and in the solid-state. Despite a large number of studies, the fundamental correlations between compositions, local symmetry, electronic structures of [{Ta6Bri12}La6]m+/n- cluster units (L = Br or H2O, in solution and in the solid-state), redox states, and vibrational and absorption properties are still not well established. Using K4[{Ta6Bri12}Bra6] as a starting precursor (i: inner and a: apical), we have investigated the behavior of the [{Ta6Bri12}Bra6]4- cluster unit in terms of oxidation properties and chemical modifications both in solution (water and organic solvent) and after recrystallization. A wide range of experimental techniques in combination with quantum chemical simulations afford new data that allow the puzzling behavior of the cluster units in response to changes in their environment to be revealed. Apical ligands undergo changes like modifications of interatomic distances to complete substitutions in solution that modify noticeably the cluster physical properties. Changes in the oxidation state of the cluster units also occur, which modify significantly their physical properties, including optical properties, which can thus be used as fingerprints. A subtle balance exists between the number of substituted apical ligands and the cluster oxidation state. This study provides new information about the exact nature of the species formed during the transition from the solid-state to solutions and vice versa. This shows new perspectives on optimization protocols for the design of Ta6 cluster-based materials.

Transparent functional nanocomposite films based on octahedral metal clusters: synthesis by electrophoretic deposition process and characterization.

Transparent optical thin films have recently attracted a growing interest for functional window applications. In this study, highly visible transparent nanocomposite films with ultraviolet (UV)-near-infrared (NIR)-blocking capabilities are reported. Such films, composed of Mo6 and Nb6 octahedral metal atom clusters (MC) and polymethylmethacrylate polymer (PMMA), were prepared by electrophoretic deposition on indium tin oxide-coated glass (ITO glass). PMMA was found to improve both the chemical and physical stability of Mo6 and Nb6 MCs, resulting in a relatively homogeneous distribution of the clusters within the PMMA matrix, as seen by microstructural observations. The optical absorption spectrum of these transparent MC@polymer nanocomposite films was marked by contributions from their Mo6 and Nb6-based clusters (absorption in the UV range) and from the ITO layer on silica glass (absorption in the NIR range). Mo6@PMMA nanocomposite films also exhibited excellent photoluminescence properties, which were preserved even after exposure to 50°C at a relative humidity of 70% for one month. These films cumulate high transparency in the visible range with remarkable UV-NIR blocking properties and represent interesting candidates for functional glass application.

Unusual Changes in Electronic Band-Edge Energies of the Nanostructured Transparent n-Type Semiconductor Zr-Doped Anatase TiO2 (Ti1-xZrxO2; x < 0.3).

By the establishment of highly controllable synthetic routes, electronic band-edge energies of the n-type transparent semiconductor Zr-doped anatase TiO2 have been studied holistically for the first time up to 30 atom % Zr, employing powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, nitrogen gas sorption measurements, UV/vis spectroscopies, and Mott-Schottky measurements. The materials were produced through a sol-gel synthetic procedure that ensures good compositional homogeneity of the materials, while introducing nanoporosity in the structure, by achieving a mild calcination condition. Vegard's law was discovered among the homogeneous samples, and correlations were established between the chemical compositions and optical and electronic properties of the materials. Up to 20% Zr doping, the optical energy gap increases to 3.29 eV (vs 3.19 eV for TiO2), and the absolute conduction band-edge energy increases to -3.90 eV (vs -4.14 eV). The energy changes of the conduction band edge are more drastic than what is expected from the average electronegativities of the compounds, which may be due to the unnatural coordination environment around Zr in the anatase phase.

Unravelling the origin of the giant Zn deficiency in wurtzite type ZnO nanoparticles.

Owing to its high technological importance for optoelectronics, zinc oxide received much attention. In particular, the role of defects on its physical properties has been extensively studied as well as their thermodynamical stability. In particular, a large concentration of Zn vacancies in ZnO bulk materials is so far considered highly unstable. Here we report that the thermal decomposition of zinc peroxide produces wurtzite-type ZnO nanoparticles with an extraordinary large amount of zinc vacancies (>15%). These Zn vacancies segregate at the surface of the nanoparticles, as confirmed by ab initio calculations, to form a pseudo core-shell structure made of a dense ZnO sphere coated by a Zn free oxo-hydroxide mono layer. In others terms, oxygen terminated surfaces are privileged over zinc-terminated surfaces for passivation reasons what accounts for the Zn off-stoichiometry observed in ultra-fine powdered samples. Such Zn-deficient Zn1-xO nanoparticles exhibit an unprecedented photoluminescence signature suggesting that the core-shell-like edifice drastically influences the electronic structure of ZnO. This nanostructuration could be at the origin of the recent stabilisation of p-type charge carriers in nitrogen-doped ZnO nanoparticles.

Nanoporous delafossite CuAlO2 from inorganic/polymer double gels: a desirable high-surface-area p-type transparent electrode material.

Nanoporous structures of a p-type semiconductor, delafossite CuAlO(2), with a high crystallinity have been fabricated through an inorganic/polymer double-gel process and characterized for the first time via Mott-Schottky measurements. The effect of the precursor concentration, calcination temperature, and atmosphere were examined to achieve high crystallinity and photoelectrochemical properties while maximizing the porosity. The optical properties of the nanoporous CuAlO(2) are in good agreement with the literature with an optical band gap of 3.9 eV, and the observed high electrical conductivity and hole concentrations conform to highly crystalline and well-sintered nanoparticles observed in the product. The Mott-Schottky plot from the electrochemical impedance spectroscopy studies indicates a flat-band potential of 0.49 V versus Ag/AgCl. It is concluded that CuAlO(2) exhibits band energies very close to those of NiO but with electrical properties very desirable in the fabrication of photoelectrochemical devices including dye-sensitized solar cells.

P-type nitrogen-doped ZnO nanoparticles stable under ambient conditions.

Zinc oxide is considered as a very promising material for optoelectronics. However, to date, the difficulty in producing stable p-type ZnO is a bottleneck, which hinders the advent of ZnO-based devices. In that context, nitrogen-doped zinc oxide receives much attention. However, numerous reviews report the controversial character of p-type conductivity in N-doped ZnO, and recent theoretical contributions explain that N-doping alone cannot lead to p-typeness in Zn-rich ZnO. We report here that the ammonolysis at low temperature of ZnO(2) yields pure wurtzite-type N-doped ZnO nanoparticles with an extraordinarily large amount of Zn vacancies (up to 20%). Electrochemical and transient spectroscopy studies demonstrate that these Zn-poor nanoparticles exhibit a p-type conductivity that is stable over more than 2 years under ambient conditions.