Acrylonitrile and Pullulan Based Nanofiber Mats as Easily Accessible Scaffolds for 3D Skin Cell Models Containing Primary Cells.

(1) Background: Three-dimensional (3D) collagen I-based skin models are commonly used in drug development and substance testing but have major drawbacks such as batch-to-batch variations and ethical concerns. Recently, synthetic nanofibrous scaffolds created by electrospinning have received increasing interest as potential alternatives due to their morphological similarities to native collagen fibrils in size and orientation. The overall objective of this proof-of-concept study was to demonstrate the suitability of two synthetic polymers in creating electrospun scaffolds for 3D skin cell models. (2) Methods: Electrospun nanofiber mats were produced with (i) poly(acrylonitrile-co-methyl acrylate) (P(AN-MA)) and (ii) a blend of pullulan (Pul), poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) (Pul/PVA/PAA) and characterized by scanning electron microscopy (SEM) and diffuse reflectance infrared Fourier transform (DRIFT) spectra. Primary skin fibroblasts and keratinocytes were seeded onto the nanofiber mats and analyzed for phenotypic characteristics (phalloidin staining), viability (Presto Blue HS assay), proliferation (Ki-67 staining), distribution (H/E staining), responsiveness to biological stimuli (qPCR), and formation of skin-like structures (H/E staining). (3) Results: P(AN-MA) mats were more loosely packed than the Pul/PVA/PAA mats, concomitant with larger fiber diameter (340 nm ± 120 nm vs. 250 nm ± 120 nm, p < 0.0001). After sterilization and exposure to cell culture media for 28 days, P(AN-MA) mats showed significant adsorption of fetal calf serum (FCS) from the media into the fibers (DRIFT spectra) and increased fiber diameter (590 nm ± 290 nm, p < 0.0001). Skin fibroblasts were viable over time on both nanofiber mats, but suitable cell infiltration only occurred in the P(AN-MA) nanofiber mats. On P(AN-MA) mats, fibroblasts showed their characteristic spindle-like shape, produced a dermis-like structure, and responded well to TGFß stimulation, with a significant increase in the mRNA expression of PAI1, COL1A1, and αSMA (all p < 0.05). Primary keratinocytes seeded on top of the dermis equivalent proliferated and formed a stratified epidermis-like structure. (4) Conclusion: P(AN-MA) and Pul/PVA/PAA are both biocompatible materials suitable for nanofiber mat production. P(AN-MA) mats hold greater potential as future 3D skin models due to enhanced cell compatibility (i.e., adsorption of FCS proteins), cell infiltration (i.e., increased pore size due to swelling behavior), and cell phenotype preservation. Thus, our proof-of-concept study shows an easy and robust process of producing electrospun scaffolds for 3D skin cell models made of P(AN-MA) nanofibers without the need for bioactive molecule attachments.

Cross-industrial applications of organotypic models.

Recent advances in microphysiological systems (MPS) promise a global paradigm shift in drug development, diagnostics, disease prevention, and therapy. The expectation is that these systems will model healthy and various diseased stages and disease progression to predict toxicity, immunogenicity, ADME profiles, and treatment efficacies. MPS will provide unprecedented human-like physiological properties of in vitro models, enabling their routine application in the pharma industry and thus reducing drug development costs by lowering the attrition rate of compounds. We showcased MPS application diversity across different industries during the TEDD Annual Meeting on 14th October 2021 in Wädenswil, Switzerland. The goal was to promote cross-sectoral collaboration of academia and industry to further pave the way for developing next-generation MPS based on 3D cell culture, organoid, and organ-on-chip technology and their widespread exploitation. To enable visionary projects and radical innovations, we covered multidisciplinary fields and connected different industry sectors, like pharma, medtech, biotech, cosmetics, diagnostics, fragrances, and food, with each other.

Matrigel 3D bioprinting of contractile human skeletal muscle models recapitulating exercise and pharmacological responses.

A key to enhance the low translatability of preclinical drug discovery are in vitro human three-dimensional (3D) microphysiological systems (MPS). Here, we show a new method for automated engineering of 3D human skeletal muscle models in microplates and functional compound screening to address the lack of muscle wasting disease medication. To this end, we adapted our recently described 24-well plate 3D bioprinting platform with a printhead cooling system to allow microvalve-based drop-on-demand printing of cell-laden Matrigel containing primary human muscle precursor cells. Mini skeletal muscle models develop within a week exhibiting contractile, striated myofibers aligned between two attachment posts. As an in vitro exercise model, repeated high impact stimulation of contractions for 3 h by a custom-made electrical pulse stimulation (EPS) system for 24-well plates induced interleukin-6 myokine expression and Akt hypertrophy pathway activation. Furthermore, the known muscle stimulators caffeine and Tirasemtiv acutely increase EPS-induced contractile force of the models. This validated new human muscle MPS will benefit development of drugs against muscle wasting diseases. Moreover, our Matrigel 3D bioprinting platform will allow engineering of non-self-organizing complex human 3D MPS.

Advances in the Biofabrication of 3D Skin in vitro: Healthy and Pathological Models.

The relevance for in vitro three-dimensional (3D) tissue culture of skin has been present for almost a century. From using skin biopsies in organ culture, to vascularized organotypic full-thickness reconstructed human skin equivalents, in vitro tissue regeneration of 3D skin has reached a golden era. However, the reconstruction of 3D skin still has room to grow and develop. The need for reproducible methodology, physiological structures and tissue architecture, and perfusable vasculature are only recently becoming a reality, though the addition of more complex structures such as glands and tactile corpuscles require advanced technologies. In this review, we will discuss the current methodology for biofabrication of 3D skin models and highlight the advantages and disadvantages of the existing systems as well as emphasize how new techniques can aid in the production of a truly physiologically relevant skin construct for preclinical innovation.

A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues.

Two-dimensional (2D) cell cultures do not reflect the in vivo situation, and thus it is important to develop predictive three-dimensional (3D) in vitro models with enhanced reliability and robustness for drug screening applications. Treatments against muscle-related diseases are becoming more prominent due to the growth of the aging population worldwide. In this study, we describe a novel drug screening platform with automated production of 3D musculoskeletal-tendon-like tissues. With 3D bioprinting, alternating layers of photo-polymerized gelatin-methacryloyl-based bioink and cell suspension tissue models were produced in a dumbbell shape onto novel postholder cell culture inserts in 24-well plates. Monocultures of human primary skeletal muscle cells and rat tenocytes were printed around and between the posts. The cells showed high viability in culture and good tissue differentiation, based on marker gene and protein expressions. Different printing patterns of bioink and cells were explored and calcium signaling with Fluo4-loaded cells while electrically stimulated was shown. Finally, controlled co-printing of tenocytes and myoblasts around and between the posts, respectively, was demonstrated followed by co-culture and co-differentiation. This screening platform combining 3D bioprinting with a novel microplate represents a promising tool to address musculoskeletal diseases.

ZHAW Waedenswil: A new Approach in the Fight against Cancer.

A happy coincidence brought Dr Markus Rimann from ZHAW Waedenswil together with Dr Andreas Meyer from the start-up FGen and PD Dr Emanuela Felley-Bosco, Molecular Oncologist at Zurich University Hospital, to develop a technology platform for the manufacture and high throughput analysis of single mesothelioma spheroids. Armin Picenoni, former student in Chemistry for the Life Sciences at ZHAW, confirmed everything in writing his Master Thesis on this Innosuisse project.

TEDD Annual Meeting with 3D Bioprinting Workshop.

Bioprinting is the technology of choice for realizing functional tissues such as vascular system, muscle, cartilage and bone. In the future, bioprinting will influence the way we engineer tissues and bring it to a new level of physiological relevance. That was the topic of the 2017 TEDD Annual Meeting at ZHAW Waedenswil on 8th and 9th November. In an exciting workshop, the two companies regenHU Ltd. and CELLINK gave us an insight into highly topical applications and collaborations in this domain.

Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells.

Cells grown in 3D are more physiologically relevant than cells cultured in 2D. To use 3D models in substance testing and regenerative medicine, reproducibility and standardization are important. Bioprinting offers not only automated standardizable processes but also the production of complex tissue-like structures in an additive manner. We developed an all-in-one bioprinting solution to produce soft tissue models. The holistic approach included (1) a bioprinter in a sterile environment, (2) a light-induced bioink polymerization unit, (3) a user-friendly software, (4) the capability to print in standard labware for high-throughput screening, (5) cell-compatible inkjet-based printheads, (6) a cell-compatible ready-to-use BioInk, and (7) standard operating procedures. In a proof-of-concept study, skin as a reference soft tissue model was printed. To produce dermal equivalents, primary human dermal fibroblasts were printed in alternating layers with BioInk and cultured for up to 7 weeks. During long-term cultures, the models were remodeled and fully populated with viable and spreaded fibroblasts. Primary human dermal keratinocytes were seeded on top of dermal equivalents, and epidermis-like structures were formed as verified with hematoxylin and eosin staining and immunostaining. However, a fully stratified epidermis was not achieved. Nevertheless, this is one of the first reports of an integrative bioprinting strategy for industrial routine application.

An in vitro osteosarcoma 3D microtissue model for drug development.

Osteosarcoma (OS) is the most common primary malignant bone tumour in children and adolescents. Therapy today includes surgical removal of the tumour and neoadjuvant and adjuvant chemotherapy. The 5-year survival rates for patients with localised disease are between 50 and 70%, but in patients with metastases the prognosis remains poor (∼ 20%). The aim of this study was the development of a biological relevant OS 3D microtissue model, which is suitable for drug development. Microtissues were formed by the hanging drop method with the established OS cell lines SaOS-2, HOS and MG-63, as well as with cells derived from osteoblastic and chondroblastic OS patient material. Histological characterisation of the microtissues with H/E- and Ki-67-(proliferation), as well as apoptosis staining (TUNEL) revealed the inherent histological heterogeneity of OS. Microtissues from SaOS-2 and HOS cell lines were exposed to doxorubicin, cisplatin, taurolidine, pemetrexed and taxol and the viability was assessed by the CellTiter-GLO(®) Luminescent Cell Viability Assay. The obtained IC50-values for 3D cultures were all higher (1.7 to >16,000-fold) when compared to corresponding cells grown in 2D monolayer culture, except for pemetrexed that was inactive in 2D and 3D cultures. Doxorubicin did not affect the viability of chondroblastic monolayer cultures whereas on 3D microtissues an IC50-value of 2.3 µM was obtained. The 3D microtissues reflect the tissue heterogeneity of OS and are potential suitable tools for drug development towards personalised medicine.

Automation of 3D cell culture using chemically defined hydrogels.

Drug development relies on high-throughput screening involving cell-based assays. Most of the assays are still based on cells grown in monolayer rather than in three-dimensional (3D) formats, although cells behave more in vivo-like in 3D. To exemplify the adoption of 3D techniques in drug development, this project investigated the automation of a hydrogel-based 3D cell culture system using a liquid-handling robot. The hydrogel technology used offers high flexibility of gel design due to a modular composition of a polymer network and bioactive components. The cell inert degradation of the gel at the end of the culture period guaranteed the harmless isolation of live cells for further downstream processing. Human colon carcinoma cells HCT-116 were encapsulated and grown in these dextran-based hydrogels, thereby forming 3D multicellular spheroids. Viability and DNA content of the cells were shown to be similar in automated and manually produced hydrogels. Furthermore, cell treatment with toxic Taxol concentrations (100 nM) had the same effect on HCT-116 cell viability in manually and automated hydrogel preparations. Finally, a fully automated dose-response curve with the reference compound Taxol showed the potential of this hydrogel-based 3D cell culture system in advanced drug development.

The angiogenic response to PLL-g-PEG-mediated HIF-1α plasmid DNA delivery in healthy and diabetic rats.

Impaired angiogenesis is a major clinical problem and affects wound healing especially in diabetic patients. Improving angiogenesis is a reasonable strategy to increase diabetes-impaired wound healing. Recently, our lab described a system of transient gene expression due to pegylated poly-l-lysine (PLL-g-PEG) polymer-mediated plasmid DNA delivery in vitro. Here we synthesized peptide-modified PLL-g-PEG polymers with two functionalities, characterized them in vitro and utilized them in vivo via a fibrin-based delivery matrix to induce dermal wound angiogenesis in diabetic rats. The two peptides were 1) a TG-peptide to covalently bind these nanocondensates to the fibrin matrix (TG-peptide) for a sustained release and 2) a polyR peptide to improve cellular uptake of these nanocondensates. In order to induce angiogenesis in vivo we condensed modified and non-modified polymers with plasmid DNA encoding a truncated form of the therapeutic candidate gene hypoxia-inducible transcription factor 1α (HIF-1α). HIF-1α is the primarily oxygen-dependent regulated subunit of the heterodimeric transcription factor HIF-1, which controls angiogenesis among other physiological pathways. The truncated form of HIF-1α lacks the oxygen-dependent degradation domain (ODD) and therefore escapes degradation under normoxic conditions. PLL-g-PEG polymer-mediated HIF-1α-ΔODD plasmid DNA delivery was found to lead to a transiently induced gene expression of angiogenesis-related genes Acta2 and Pecam1 as well as the HIF-1α target gene Vegf in vivo. Furthermore, HIF-1α gene delivery was shown to enhance the number endothelial cells and smooth muscle cells - precursors for mature blood vessels - during wound healing. We show that - depending on the selection of the therapeutic target gene - PLL-g-PEG nanocondensates are a promising alternative to viral DNA delivery approaches, which might pose a risk to health.

Synthetic 3D multicellular systems for drug development.

Since the 1970s, the limitations of two dimensional (2D) cell culture and the relevance of appropriate three dimensional (3D) cell systems have become increasingly evident. Extensive effort has thus been made to move cells from a flat world to a 3D environment. While 3D cell culture technologies are meanwhile widely used in academia, 2D culture technologies are still entrenched in the (pharmaceutical) industry for most kind of cell-based efficacy and toxicology tests. However, 3D cell culture technologies will certainly become more applicable if biological relevance, reproducibility and high throughput can be assured at acceptable costs. Most recent innovations and developments clearly indicate that the transition from 2D to 3D cell culture for industrial purposes, for example, drug development is simply a question of time.

Telomere length, telomerase activity and osteogenic differentiation are maintained in adipose-derived stromal cells from senile osteoporotic SAMP6 mice.

Adipose tissue provides for a rich and easily accessible source of multipotent stromal cells and thus offers the potential for autologous cell-based therapy for a number of degenerative diseases. Senile osteoporosis is characterized by a reduction in bone quality, which is associated with inadequacies in bone marrow stromal cell (BMSC) differentiation. In the present study, we have characterized adipose-derived stromal cells (ASCs) isolated from aged osteoporotic mice and evaluated their suitability as a source of osteogenic precursor cells. Significant reductions in both tibia bone quality and telomere length in liver tissue were observed in the senescence-accelerated mouse prone 6 strain (SAMP6), as compared to the control age-matched senescence-accelerated mouse resistant 1 strain (SAMR1), thus confirming osteoporosis and accelerated ageing traits in this model. ASCs isolated from inguinal fat expressed mesenchymal surface markers and were capable of differentiating along the osteoblast, adipocyte and chondrocyte lineages. Telomere length was not compromised in ASCs from SAMP6 mice but was actually found to be significantly increased as compared to control SAMR1 mice. Furthermore, ASCs from both strains were comparable in terms of telomerase activity, p21 mRNA expression, SA-ß-gal activity and proliferative capacity. The overall osteogenic and adipogenic potential of ASCs was comparable between SAMP6 and SAMR1 strains, as determined by quantitative molecular, biochemical and histological analyses. In conclusion, adipose tissue may represent a promising autologous cell source for the development of novel bone regenerative therapeutic strategies in the treatment of age-related osteoporosis.

Cellular uptake and intracellular pathways of PLL-g-PEG-DNA nanoparticles.

Polycationic molecules form condensates with DNA and are used for gene therapy as an alternative to viral vectors. As clinical efficacy corresponds to cellular uptake, intracellular stability of the condensates, and bioavailability of the DNA, it is crucial to analyze uptake mechanisms and trafficking pathways. Here, a detailed study of uptake, stability, and localization of PLL-g-PEG-DNA nanoparticles within COS-7 cells is presented, using FACS analysis to assess the involvement of different uptake mechanisms, colocalization studies with markers indicative for different endocytotic pathways, and immunofluorescence staining to analyze colocalization with intracellular compartments. PLL-g-PEG-DNA nanoparticles were internalized in an energy-dependent manner after 2 h and accumulated in the perinuclear region after >6 h. The nanoparticles were found to be stable within the cytoplasm for at least 24 h and did not colocalize with the endosomal pathway. Nanoparticle uptake was approximately 50% inhibited by genistein, an inhibitor of the caveolae-mediated pathway. However, genistein did not inhibit gene expression, and PLL-g-PEG-DNA nanoparticles were not colocalized with caveolin-1 indicating that caveolae-mediated endocytosis is not decisive for DNA delivery. Clathrin-mediated endocytosis and macropinocytosis pathways were reduced by 17 and 24%, respectively, in the presence of the respective inhibitors. When cells were transfected in the presence of double and triple inhibitors, transfection efficiencies were increasingly reduced by 40 and 70%, respectively; however, no differences were found between the different uptake mechanisms. These findings suggest that PLL-g-PEG-DNA nanoparticles enter by several pathways and might therefore be an efficient and versatile tool to deliver therapeutic DNA.