Hyperthermic triggers for drug delivery platforms.

Electromagnetic fields can penetrate aqueous media in a homogeneous and instantaneous way, without physical contact, independently of its temperature, pressure, agitation degree and without modifying their chemical compositions nor heat and mass transfer conditions. In addition, superparamagnetic biomaterials can interact with electromagnetic fields by absorbing electromagnetic energy and transforming it in localized heat with further diffusion to surrounding media. This paper is devoted to the exploration of the potential use of hyperthermic effects resulting from the interaction between externally applied electromagnetic fields and superparamagnetic nanoparticles as a trigger for controlled drug release in soft tissue simulating materials. Gelatin based soft tissue simulating materials were prepared and doped with superparamagnetic nanoparticles. The materials were irradiated with externally applied electromagnetic fields. The effects on temperature and diffusion of a drug model in water and phosphate buffer were investigated. Significant hyperthermic effects were observed. The temperature of the soft tissue simulating material resulted increased from 35 °C to 45 °C at 2.5 °C min-1. Moreover, the release of an entrapped model drug reached 89%. The intensity of the hyperthermic effects was found to have a strong dependency on the concentration of superparamagnetic nanoparticles and the power and the pulse frequency of the electromagnetic field.

Multifactorial Effects of Gelling Conditions on Mechanical Properties of Skin-Like Gelatin Membranes Intended for In Vitro Experimentation and Artificial Skin Models.

The development of new cosmetic products, skin contact medical devices, skin medicaments, wound care devices, tattooing and piercing has experienced an impressive growth in recent years. In parallel, new restrictions to in vivo experimentation in animals and humans have been widely implemented by regulatory authorities. New knowledge about alternative materials for in vitro skin-related experimentation is required to overcome these severe limitations. This paper presents a set of three 4-D surface response equations describing the mechanical properties of skin-like gelatin membranes intended for use as an alternative biomaterial for in vitro skin-related experimentation. The membranes were obtained by a sol-gel method. The novelty of this contribution is the establishment of the cross-dependency effects of key synthesis conditions on the final mechanical properties of gelatin membranes. The results of this work are useful to produce gelatin membranes with tailored mechanical properties mimicking different types of human skins. In particular, membranes with Young's modulus of 1 MPa and maximum tensile strength of 0.85 MPa were obtained.

Catalytic effects of magnetic and conductive nanoparticles on immobilized glucose oxidase in skin sensors.

Wearable skin sensors is a promising technology for real-time health care monitoring. They are of particular interest for monitoring glucose in diabetic patients. The concentration of glucose in sweat can be more than two orders of magnitude lower than in blood. In consequence, the scientific and technological efforts are focused in developing new concepts to enhance the sensitivity, decrease the limit of detection (LOD) and reduce the response time (RT) of glucose skin sensors. This work explores the effect of adsorbed superparamagnetic magnetite nanoparticles (MNPs) and conductive nanoparticles (CNPs) on carbon nanotube substrates (CNTs) used to immobilize glucose oxidase enzyme in the working electrode of skin sensors. MNPs and CNPs are made of magnetite and gold, respectively. The performance of the sensors was tested in standard buffer solution, artificial sweat, fresh sweat and on the skin of a healthy volunteer during an exercise session. In the case of artificial sweat, the presence of MNPs accelerated the RT from 7 to 5 s at the expense of increasing the LOD from 0.017 to 0.022 mM with slight increase of the sensitivity from 4.90 to 5.09µAm M-1cm-2. The presence of CNPs greatly accelerated the RT from 7 to 2 s and lowered the LOD from 0.017 to 0.014 mM at the expense of a great diminution of the sensitivity from 4.90 to 4.09µAm M-1cm-2. These effects were explained mechanistically by analyzing the changes in the concentration of free oxygen and electrons promoted by MNPs and CNPs in the CNTs and its consequences on the the glucose oxidation process.

A multiparametric model for the industrialization of co-precipitation synthesis of nano-commodities.

Magnetite superparamagnetic nanoparticles (MNP) are becoming one of the firsts nanocommodity products. MNP find a number of applications and they are been produced at relatively large scale. The co-precipitation method presents many technical and economical advantages among alternative processes. However, the relationships between physical and chemical reaction conditions during the co-precipitation process and the resulting properties of obtained MNP are not yet fully understood. The novelty of this contribution is the establishment of the cross-dependency effects of the main physical and chemical parameters of the co-precipitation reaction on the properties of resulting MNP. The conditions were varied by following an experimental design. The crystallite size, particle size and magnetization of the MNP and the Z-potential and size of their aggregates were selected as main response properties. A set of equations in the form of 4D surface responses in the space of co-precipitation process variables was obtained and analyzed in terms of the resulting properties. The set of equations is useful to predict, optimize and tailor very precisely the properties of resulting MNP as a function of reaction conditions.

Novel Poly(Diol Sebacate)s as Additives to Modify Paclitaxel Release From Poly(Lactic-co-Glycolic Acid) Thin Films.

Paclitaxel (PTX) incorporation in poly(lactic-co-glycolic acid) (PLGA) matrices produce films with high tensile rigidity and slow release that fail to deliver the required release rate for most biomedical applications such as in drug eluting stents and cancer treatments. To modify and improve this behavior, a set of poly(diol sebacate)s were synthesized and fully characterized as possible additives. The tensile properties of PLGA blends were evaluated as these materials could be used as coatings in drug eluting stent applications. A significant improvement in mechanical flexibility was observed with 20% additive content, as it reduced the Young's modulus value and increased the maximum deformation at break. PTX release was studied and correlated with the release of additive from PLGA films. An increase in the initial burst release phase was observed on all blends when compared to the control films of PLGA. Modulation of PTX release was achieved by altering the hydrophilicity degree of the additive or its percentage content on the blend. This supports the possibility that PTX was partitioned into the additive phase. Cytotoxicity analyses of novel additives were performed on mouse embryonic fibroblasts NIH/3T3.

Poly(polyol sebacate) Elastomers as Coatings for Metallic Coronary Stents.

Biocompatible polymeric coatings for metallic stents are desired, as currently used materials present limitations such as deformation during degradation and exponential loss of mechanical properties after implantation. These concerns, together with the present risks of the drug-eluting stents, namely, thrombosis and restenosis, require new materials to be studied. For this purpose, novel poly(polyol sebacate)-derived polymers are investigated as coatings for metallic stents. All pre-polymers reveal a low molecular weight between 3000 and 18 000 g mol-1 . The cured polymers range from flexible to more rigid, with E-modulus between 0.6 and 3.8 MPa. Their advantages include straightforward synthesis, biodegradability, easy processing through different scaffolding techniques, and easy transfer to industrial production. Furthermore, electrospraying and dip-coating procedures are used as proof-of-concept to create coatings on metallic stents. Biocompatibility tests using adipose stem cells lead to promising results for the use of these materials as coatings for metallic coronary stents.

Absolute determination of the gelling point of gelatin under quasi-thermodynamic equilibrium.

Thermodynamic studies on phase transformation of biopolymers in solution are useful to understand their nature and to evaluate their technological potentials. Thermodynamic studies should be conducted avoiding time-related phenomena. This condition is not easily achieved in hydrophilic biopolymers. In this contribution, the simultaneous effects of pH, salt concentration, and cooling rate (Cr) on the folding from random coil to triple helical collagen-like structures of gelatin were systematically studied. The phase transformation temperature at the absolute invariant condition of Cr = 0 °C/min (T(T)Cr=0) ) is introduced as a conceptual parameter to study phase transformations in biopolymers under quasi-thermodynamic equilibrium and avoiding interferences coming from time-related phenomena. Experimental phase diagrams obtained at different Cr are presented. The T(T)(Cr=0) compared with pH and TT(Cr=0) compared with [NaCl] diagram allowed to explore the transformation process at Cr = 0 °C/min. The results were explained by electrostatic interactions between the biopolymers and its solvation milieu.