Characterisation of New Zealand Propolis from Different Regions Based on Its Volatile Organic Compounds.

Propolis is a bee product mainly consisting of plant resins and is used by bees to maintain the structural integrity of the colony. Propolis is known to contribute to bee health via its antimicrobial activity and is a valued product for human use owing to its nutritional and medicinal properties. Propolis is often characterised into seven categories depending on the resin source. New Zealand propolis is typically assumed as being poplar-type propolis, but few studies have chemically characterised New Zealand propolis to confirm or reject this assumption. Here, for the first time, we characterise propolis originating from different regions in New Zealand based on its volatile organic compounds, using gas chromatography coupled with mass spectrometry (GC-MS). To support this characterisation, we also collected and analysed resin samples from a variety of resin-producing plants (both native to New Zealand and introduced). Our findings suggest that bees mainly use poplar as a resin source, but also utilize native plant species to produce propolis. While regional variation did not allow for clear separation between samples, some patterns emerged, with samples from some regions having more chemical complexity and a higher contribution from native species (as suggested by a higher number of compounds unique to native species resin). Further studies are needed to accurately identify the botanical sources contributing to these samples. It may be also of interest to explore the biological activity of regional propolis samples and their potential nutritional or medicinal benefits.

Consensus on managing open ankle fractures in the frail patient.

Aims: Ankle fractures are common injuries and the third most common fragility fracture. In all, 40% of ankle fractures in the frail are open and represent a complex clinical scenario, with morbidity and mortality rates similar to hip fracture patients. They have a higher risk of complications, such as wound infections, malunion, hospital-acquired infections, pressure sores, veno-thromboembolic events, and significant sarcopaenia from prolonged bed rest. Methods: A modified Delphi method was used and a group of experts with a vested interest in best practice were invited from the British Foot and Ankle Society (BOFAS), British Orthopaedic Association (BOA), Orthopaedic Trauma Society (OTS), British Association of Plastic & Reconstructive Surgeons (BAPRAS), British Geriatric Society (BGS), and the British Limb Reconstruction Society (BLRS). Results: In the first stage, there were 36 respondents to the survey, with over 70% stating their unit treats more than 20 such cases per year. There was a 50:50 split regarding if the timing of surgery should be within 36 hours, as per the hip fracture guidelines, or 72 hours, as per the open fracture guidelines. Overall, 75% would attempt primary wound closure and 25% would utilize a local flap. There was no orthopaedic agreement on fixation, and 75% would permit weightbearing immediately. In the second stage, performed at the BLRS meeting, experts discussed the survey results and agreed upon a consensus for the management of open elderly ankle fractures. Conclusion: A mutually agreed consensus from the expert panel was reached to enable the best practice for the management of patients with frailty with an open ankle fracture: 1) all units managing lower limb fragility fractures should do so through a cohorted multidisciplinary pathway. This pathway should follow the standards laid down in the "care of the older or frail orthopaedic trauma patient" British Orthopaedic Association Standards for Trauma and Orthopaedics (BOAST) guideline. These patients have low bone density, and we should recommend full falls and bone health assessment; 2) all open lower limb fragility fractures should be treated in a single stage within 24 hours of injury if possible; 3) all patients with fragility fractures of the lower limb should be considered for mobilisation on the day following surgery; 4) all patients with lower limb open fragility fractures should be considered for tissue sparing, with judicious debridement as a default; 5) all patients with open lower limb fragility fractures should be managed by a consultant plastic surgeon with primary closure wherever possible; and 6) the method of fixation must allow for immediate unrestricted weightbearing.

Primary Ankle Fusion Using an Antegrade Nail Into the Talus for Early Treatment of OTA Type C3 Distal Tibial Plafond Fractures: A Preliminary Report.

BACKGROUND: Type C3 distal tibial plafond fractures consistently show poor outcomes with high complication rates and significant risk of posttraumatic arthritis. We describe a minimally invasive technique of performing a primary ankle fusion using an anterograde tibial nail and compare our early results to traditional methods of fixation. METHODS: During the acute admission, the patient undergoes an arthroscopic preparation of the ankle joint and insertion of an anterograde nail into the talus. This technique is described in detail and presented alongside a retrospective 5-year review of all adult C3 distal tibial plafond fractures from our center. RESULTS: Twenty-six patients (8 open fractures) had been fixed traditionally using open reduction internal fixation (24 patients) and circular frames (2 patients) with an average follow-up of 20 months. Those internally fixed had protected weightbearing for 3 months. Complications included deep infection (12%), nonunion (8%), malunion (4%), severe posttraumatic osteoarthritis (27%), and the secondary conversion to ankle replacement/fusion (12%) requiring an average of 3 reoperations.Six patients underwent primary fusion (3 open fractures) with an average follow-up of 18 months. Patients were allowed to immediately weightbear. There were no reported complications and the primary fusion group demonstrated shorter hospital stays, faster return to work, and higher mean self-reported foot and ankle score (SEFAS) compared to those treated with ORIF. CONCLUSION: C3 distal tibial plafond fractures are difficult to manage and there has not been a satisfactory method of treating them that allows early return to work, has a low risk of complications, and reduces the risk of posttraumatic tibiotalar arthritis.We present our initial results with a method that uses traditional arthroscopic techniques to prepare the tibiotalar joint together with minimally invasive anterograde tibiotalar nailing. In this initial report of a small group of patients, we found that surgery can be performed once the swelling has subsided after injury and that allowing weightbearing as tolerated did not appear to have a negative effect on initial outcomes. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Talar neck and body fracture outcomes: a multicentre retrospective review.

PURPOSE: Talar neck and body fractures are uncommon injuries that are challenging to manage with high reported complication rates, including post-traumatic arthritis, avascular necrosis, and poor functional outcomes. The aim of this study was to assess the complication rates for patients with talus fractures across three major trauma centres (MTCs) in England. METHODS: A retrospective analysis was performed of prospectively collected trauma databases. Data were collected from three English MTCs. Patients with talar neck and/or body fractures sustained between August 2015 and August 2019 were identified and their clinical course reviewed radiologically and clinically. Isolated process fractures, osteochondral defects and paediatric patients were excluded. Patients were analysed by fracture type and for definitive treatment method with separation into non-operative and operative management groups. Procedure type was identified in the operative group. Superficial infection, deep infection, non-union, avascular necrosis, post-traumatic arthritis and removal of metalwork rates were analysed. RESULTS: Eighty-five patients with talar neck and/or body fractures were included. Seventy-five patients received operative management, 10 non-operative. The overall AVN rate was 5.9% (five patients), overall post-traumatic arthritis rate was 18.8% (16 patients), deep infection rate 1.2% (one patient), non-union rate 4.7% (four patients). Removal of metalwork rate was 9.4% (eight patients). CONCLUSION: Our reported outcomes and complication rates are generally lower than those previously described. This may be a result of improved techniques, a higher frequency of open reduction with direct visualisation or by surgery occurring in centralised specialist centres.

Identification of late asthmatic reactions following specific inhalation challenge.

Specific inhalation challenge (SIC) is the reference standard for the diagnosis of occupational asthma. Current guidelines for identifying late asthmatic reactions are not evidence based. OBJECTIVES: To identify the fall in forced expiratory volume in 1 s (FEV1) required following SIC to exceed the 95% CI for control days, factors which influence this and to show how this can be applied in routine practice using a statistical method based on the pooled SD for FEV1 from three control days. METHODS: Fifty consecutive workers being investigated for occupational asthma were asked to self-record FEV1 hourly for 2 days before admission for SIC. These 2 days were added to the in-hospital control day to calculate the pooled SD and 95% CI. RESULTS: 45/50 kept adequate measurements. The pooled 95% CI was 385 mL (SD 126), or 14.2% (SD 6.2) of the baseline FEV1, but was unrelated to the baseline FEV1 (r=0.06, p=0.68), or gender, atopy, smoking, non-specific reactivity or treatment before or during SIC. Thirteen workers had a late asthmatic reaction with ≥2 consecutive FEV1 measurements below the 95% CI for pooled control days, 4/13 had <15% and 9/13 >15% late fall from baseline. The four workers with ≥2 values below the 95% CI all had independent evidence of occupational asthma. CONCLUSION: The pooled SD method for defining late asthmatic reactions has scientific validity, accounts for interpatient spirometric variability and diurnal variation and can identify clinically relevant late asthmatic reactions from smaller exposures. For baseline FEV1 <2.5 L, a 15% fall is within the 95% CI.

Management of hip fractures during the COVID-19 pandemic at a high-volume hip fracture unit in the United Kingdom.

This study aimed to compare the treatment pathway and 30-day outcomes of hip fracture patients admitted during the COVID-19 pandemic with the pre-pandemic period. Three periods were retrospectively analysed: period C = 23/03/2020-11/05/2020, period A = 23/03/2018-11/05/2018, period B = 23/03/2019-11/05/2019. No statistically significant differences in time to surgery, type of treatment, complications, and mortality rates were noted. A significant reduction (p = 0.021) in the time to orthogeriatric assessment and length of inpatient stay (p < 0.001) was found in period C. Institutional adaptions to facilitate prompt treatment in hip fractures during the pandemic resulted in favourable outcomes.

The effect of carbohydrate sources: Sucrose, invert sugar and components of manuka honey, on core bacteria in the digestive tract of adult honey bees (Apis mellifera).

Bacteria within the digestive tract of adult honey bees are likely to play a key role in the digestion of sugar-rich foods. However, the influence of diet on honey bee gut bacteria is not well understood. During periods of low floral abundance, beekeepers often supplement the natural sources of carbohydrate that honey bees collect, such as nectar, with various forms of carbohydrates such as sucrose (a disaccharide) and invert sugar (a mixture of the monosaccharides glucose and fructose). We compared the effect of these sugar supplements on the relative abundance of bacteria in the gut of bees by feeding bees from a single colony, two natural diets: manuka honey, a monofloral honey with known antibacterial properties, and a hive diet; and artificial diets of invert sugar, sucrose solution, and sucrose solutions containing synthesised compounds associated with the antibacterial properties of manuka honey. 16S ribosomal RNA (rRNA)-based sequencing showed that dietary regimes containing manuka honey, sucrose and invert sugar did not alter the relative abundance of dominant core bacteria after 6 days of being fed these diets. However, sucrose-rich diets increased the relative abundances of three sub-dominant core bacteria, Rhizobiaceae, Acetobacteraceae, and Lactobacillus kunkeei, and decreased the relative abundance of Frischella perrara, all which significantly altered the bacterial composition. Acetogenic bacteria from the Rhizobiaceae and Acetobacteraceae families increased two- to five-fold when bees were fed sucrose. These results suggest that sucrose fuels the proliferation of specific low abundance primary sucrose-feeders, which metabolise sugars into monosaccharides, and then to acetate.

Characteristics of hypersensitivity pneumonitis diagnosed by interstitial and occupational lung disease multi-disciplinary team consensus.

INTRODUCTION: The causes of hypersensitivity pneumonitis (HP) in the UK are changing as working practices evolve, and metalworking fluid (MWF) is now a frequently reported causative exposure. We aimed to review and describe all cases of HP from our UK regional service, with respect to the causative exposure and diagnostic characteristics. METHODS: In a retrospective, cross-sectional study, we collected patient data for all 206 cases of HP diagnosed within our UK-based regional NHS interstitial and occupational lung disease service, 2002-17. This included demographics, environmental and occupational exposures, clinical features, and diagnostic tests (CT imaging, bronchiolo-alveolar cell count, lung function, histology). We grouped the data by cause (occupational, non-occupational and unknown) and by presence or absence of fibrosis on CT, in order to undertake hypothesis testing. RESULTS: Cases were occupational (n = 50), non-occupational (n = 56) or cryptogenic (n = 100) in aetiology. The commonest causes were birds = 37 (18%) and MWF = 36 (17%). Other occupational causes included humidifiers and household or commercial waste, but only one case of farmers' lung. Cryptogenic cases were associated with significantly older age, female gender, lower lung function parameters, fewer alveolar lymphocyte counts >20%, and fibrosis on CT; exposure information was missing in 22-33% of cryptogenic cases. CONCLUSION: MWF is the commonest occupational cause of HP, where workers usually present with more acute/subacute features and less fibrosis on CT; refuse work is an emerging cause. Cryptogenic HP has a fibrotic phenotype, and a full occupational history should be taken, as historical workplace exposures may be relevant.

Occupational asthma; the limited role of air-fed respiratory protective equipment.

BACKGROUND: Evidence-based reviews have found that evidence for the efficacy of respiratory protective equipment (RPE) in the management of occupational asthma (OA) is lacking. AIMS: To quantify the effectiveness of air-fed RPE in workers with sensitizer-induced OA exposed to metal-working fluid aerosols in a car engine and transmission manufacturing facility. METHODS: All workers from an outbreak of metal-working fluid-induced OA who had continuing peak expiratory flow (PEF) evidence of sensitizer-induced OA after steam cleaning and replacement of all metal-working fluid were included. Workers kept 2-hourly PEF measurements at home and work, before and after a strictly enforced programme of RPE with air-fed respirators with charcoal filters. The area-between-curve (ABC) score from the Oasys plotter was used to assess the effectiveness of the RPE. RESULTS: Twenty workers met the inclusion criteria. Records were kept for a mean of 24.6 day shifts and rest days before and 24.7 after the institution of RPE. The ABC score improved from 26.6 (SD 16.2) to 17.7 (SD 25.4) l/min/h (P > 0.05) post-RPE; however, work-related decline was <15 l/min/h in only 12 of 20 workers, despite increased asthma treatment in 5 workers. CONCLUSIONS: Serial PEF measurements assessed with the ABC score from the Oasys system allowed quantification of the effect of RPE in sensitized workers. The RPE reduced falls in PEF associated with work exposure, but this was rarely complete. This study suggests that RPE use cannot be relied on to replace source control in workers with OA, and that monitoring post-RPE introduction is needed.

Hospital Attendances and Acute Admissions Preceding a Diagnosis of Occupational Asthma.

PURPOSE: Occupational exposures are a common cause of adult-onset asthma; rapid removal from exposure to the causative agent offers the best chance of a good outcome. Despite this, occupational asthma (OA) is widely underdiagnosed. We aimed to see whether chances of diagnosis were missed during acute hospital attendances in the period between symptom onset and the diagnosis of OA. METHODS: Patients diagnosed with OA at the regional occupational lung disease service in Birmingham between 2007 and 2018 whose home address had a Birmingham postcode were included. Emergency department (ED) attendances and acute admission data were retrieved from acute hospitals in the Birmingham conurbation for the period between symptom onset and diagnosis. RESULTS: OA was diagnosed in 406 patients, 147 having a Birmingham postcode. Thirty-four percent (50/147) had acute hospital attendances to a Birmingham conurbation hospital preceding their diagnosis of OA, including 35 (24%) with respiratory illnesses, which resulted in referral for investigation of possible OA in 2/35. The median delay between symptom onset and diagnosis of OA was 30 months (IQR = 13-60) and between first hospital attendance with respiratory illness and diagnosis 12 months (IQR = 12-48, range 3-96 months) CONCLUSIONS: The chance to reduce the delay in the diagnosis of OA was missed in 33/35 patients admitted or seen in ED with respiratory symptoms in the period between symptom onset and diagnosis of OA. The diagnosis of OA was delayed by a median of 12 months by failure to ask about employment and work relationship of symptoms.

Standardised virtual fracture clinic management of Achilles tendon ruptures is safe and reproducible.

BACKGROUND: Traditional fracture clinics are some of the busiest clinics in a hospital, often with significant patient waiting times and delays. The use of virtual fracture clinic (VFC) for the management of certain injuries to reduce the workload on the traditional fracture clinic, in addition to reducing costs is growing in popularity. The tendoachilles is the most frequently ruptured tendon in the body but despite this, management remains a keenly debated topic. METHODS: All adult patients referred to the VFC with an actual or suspected Achilles tendon rupture were identified between January 2015 to October 2017. RESULTS: This study found that patient with and acute achilles tendon ruptures managed according to a standardised VFC protocol had a re-rupture rate of 3.82%. CONCLUSIONS: One of the advantages of a VFC model that is standardised, initiated in the ED, is that it has no variation in outcome seen in our patient group.

Microsatellite markers for Corybas (Orchidaceae) species in New Zealand.

PREMISE OF THE STUDY: Microsatellite markers were developed for New Zealand species of Corybas (Orchidaceae) to investigate population genetics and species delimitation. METHODS AND RESULTS: From sequencing a total genomic DNA library (using Illumina MiSeq), we developed 22 microsatellite markers for C. obscurus. The di- and trinucleotide repeat loci were initially trialed on individuals representing seven Corybas taxa (C. "rimutaka," C. confusus, C. hypogaeus, C. macranthus, C. obscurus, C. trilobus, and C. walliae) and had one to eight alleles per locus. Twelve polymorphic markers were further tested on six Corybas populations from three of the seven taxa (C. obscurus, C. "rimutaka," and C. trilobus). Observed and expected heterozygosities ranged from 0-1 and 0-0.859, respectively. The utility of these 12 loci was further validated in five related Corybas species (C. hypogaeus, C. obscurus, C. vitreus, C. walliae, and C. "rimutaka"; 38 individuals) representing populations from across the North and South Islands. The average value for genetic diversity among populations (F ST) of 0.439 shows differentiation among species. CONCLUSIONS: These markers will be useful for future studies aimed at delimiting species boundaries and examining the genetic diversity of the New Zealand Corybas species.

Understanding and interpreting funnel plots for the clinician.

Funnel plots are an increasingly common graphical tool which are widely used in the literature. They were first introduced by Light and Pillemer in 1984 . In scientific literature, funnel plots are used to identify the probability of bias in meta-analyses and compare institutional performance. The ability to identify variation is better with graphical than tabular display. In addition, the way data are presented can directly influence the interpretation of results. This was demonstrated by Marshall et al (2004) , who presented institutional mortality data in both a league table and control chart format. This study illustrated that when displayed as a league table, a greater number of units were identified for investigation than were actually required. The use of control charts or funnel plots may therefore show benefit in reducing the number of inappropriately labelled outliers. This article explains how clinicians should read and interpret funnel plots, and discusses their considerations and limitations.

Do laboratory challenge tests for occupational asthma represent what happens in the workplace?

Specific inhalation challenge (SIC) is the diagnostic reference standard for occupational asthma; however, a positive test cannot be considered truly significant unless it can be reproduced by usual work exposures. We have compared the timing and responses during SIC in hospital to Oasys analysis of serial peak expiratory flow (PEF) during usual work exposures.All workers with a positive SIC to occupational agents between 2006 and 2015 were asked to measure PEF every 2 h from waking to sleeping for 4 weeks during usual occupational exposures. Responses were compared between the laboratory challenge and the real-world exposures at work.All 53 workers with positive SIC were included. 49 out of 53 had records suitable for Oasys analysis, 14 required more than one attempt and all confirmed occupational work-related changes in PEF. Immediate SIC reactors and deterioration within the first 2 h of starting work were significantly correlated with early recovery, and late SIC reactors and a delayed start to workplace deterioration were significantly correlated with delayed recovery. Dual SIC reactions had features of immediate or late SIC reactions at work rather than dual reactions.The concordance of timings of reactions during SIC and at work provides further validation for the clinical significance of each test.

Mycobacterium shimoidei: an uncommon non-tuberculous infection in a UK patient.

We present the case of a 69-year-old man with significant respiratory comorbidities who presented with slow growing pulmonary nodules which cavitated. Subsequent sputum sampling grew Mycobacterium shimoidei, a non-tuberculous mycobacterium species and an uncommon cause of infection in the UK. We describe the diagnostic process and subsequent treatment regimen.