RESUMO
Within the new circular economy paradigm, this work evaluates the performance of tailored mixed metal oxides (MMO) anodes, based on ruthenium and antimony, for their application into an electrochemically-assisted organic refinery process. This process is designed to transform pollutants into value-added products with minimal mineralization. Oxidation of synthetic wastes consisting of phenol solutions was used to validate the electrochemical conversion of phenolic wastes into carboxylates, which are then considered as bricks to be used for electrosynthesis or to produce fuels. The MMO anodes were manufactured using two synthesis routes (Pechini method and ionic liquid method), each followed by one of three different heating treatments: furnace, microwave, and CO2 laser. The selection of the optimal electrode for the organic electrorefinery was based on a combination of physical and electrochemical properties, degradation performance of phenol to carboxylates, and long-term stability, looking for a truly sustainable solution. Results indicate that anodes synthesized by the ionic liquid (IL) method, regardless of the heating treatment, demonstrated superior performance, with larger active areas (with furnace 82 mC cm-2, microwave 97 mC cm-2, and laser 127 mC cm-2) and higher phenol degradation rates, resulting in a greater generation of carboxylates during electrolysis, yielding primarily oxalate and achieving up to 40% conversion with furnace heating. However, laser-treated anodes exhibited greater stability than furnace-made ones, attributed to the formation of an insulating TiO2 layer. Although the electrode with the longest service life did not show the best catalytic properties for minimizing mineralization, the observed variations in coatings with identical chemical compositions highlight the importance of this research. This study positions itself at the forefront of developing more efficient and sustainable electrochemical technologies for organic waste treatment.
RESUMO
This prospective work focuses on the use of two different gaseous oxidants (chlorine dioxide and ozone) to remediate soil polluted with methomyl in two different applications: ex-situ and in-situ. In the first, the soil washing is integrated with the bubbling of the oxidant, while in the second, the gas was introduced by a perforated pipe located sub-superficially. Regarding the soil washing treatment, results demonstrate that direct use of ozone is not very efficient, although an important improvement is obtained following activation with hydrogen peroxide or UV light. In contrast, chlorine dioxide exhibited complete methomyl depletion from the soil, although with higher energy consumption and technical complexity compared to ozone. The direct dosing of the gaseous oxidants in perforated pipes is effective, achieving methomyl removals of 7.8 % and 9.2 % using ozone and chlorine dioxide, respectively. In these cases, soil conditions are not significantly modified, which becomes an important advantage of the technology as compared with other electrochemically assisted soil remediation process, in which large regions of the treated soil are affected by important changes in the pH or by depletion of ions. This lower impact makes these novel technologies more promising for further evaluations.
Assuntos
Compostos Clorados , Recuperação e Remediação Ambiental , Metomil , Oxidantes , Óxidos , Ozônio , Poluentes do Solo , Ozônio/química , Poluentes do Solo/análise , Poluentes do Solo/química , Recuperação e Remediação Ambiental/métodos , Óxidos/química , Compostos Clorados/química , Metomil/química , Oxidantes/química , Solo/químicaRESUMO
This study focuses on the synthesis of mixed metal oxide anodes (MMOs) with the composition Ti/RuO2Sb2O4Ptx (where x = 0, 5, 10 mol) using hybrid microwave irradiation heating. The synthesized electrodes were characterized using scanning electron microscopy, X-ray energy-dispersive analysis, X-ray diffraction, cyclic voltammetry, and electrochemical impedance spectroscopy. These electrodes were then evaluated in both bulk electrolytic and fuel cell tests within a reversible chloralkaline electrochemical cell. The configurations using the electrodes Ti/(RuO2)0.7-(Sb2O4)0.3 and Ti/(RuO2)66.5-(Sb2O4)28.5-Pt5 presented lower onset potential for oxygen and chlorine evolution reactions and reduced resistance to charge transfer compared to the Ti/(RuO2)63-(Sb2O4)27-Pt10 variant. These electrodes demonstrated notable performance in reversible electrochemical cells, achieving Coulombic efficiencies of up to 60% when operating in the electrolytic mode at current densities of 150 mA cm-2. They also reached maximum power densities of 1.2 mW cm-2 in the fuel cell. In both scenarios, the presence of platinum in the MMO coating positively influenced the process. Furthermore, a significant challenge encountered was crossover through the membranes, primarily associated with gaseous Cl2. This study advances our understanding of reversible electrochemical cells and presents possibilities for further exploration and refinement. It demonstrated that the synergy of innovative electrode synthesis strategies and electrochemical engineering can lead to promising and sustainable technologies for energy conversion.
RESUMO
Boron-doped diamond (BDD) electrodes are the most effective and resistant electrodic materials to perform advanced oxidation processes. Having a reactor that can provide adequate hydrodynamic conditions is mandatory to use these electrodes effectively. In this work, the diamond anode electrochemical reactor (E3L-DAER) is designed to fulfill this necessity. Several features are included to improve its efficiency, like conic inlet/outlet, flow enhancers, and a reduced interelectrode gap. The fluid dynamic validation has been performed using computer fluid dynamics (CFD) calculations, residence time distribution (RDT) curves, and mass transfer analysis. The reactor has been made using a three-dimensional (3D) printing stereolithography (SLA) technique, which allows us to build chemical-resistant reactors with nonstandard and tailored features in a cheap and fast way. The obtained results demonstrate that the designed reactor has the required fluid dynamics properties to perform reliable BDD electrode studies and applications. Finally, a BDD electrode was used to test the production of different oxidants such as persulfate, peroxophosphate, and chlorine-derived species.
RESUMO
This work focuses on the comparison of the performance of direct electrochemical oxidation with indirect electrolysis mediated by gaseous oxidants in the treatment of diluted wastewater. To do this, energy consumptions of the electrolysis using mixed metal oxide (MMO) electrodes are compared with those required for the production and use of chlorine dioxide in the degradation of methomyl contained in aqueous solutions. Results demonstrate the feasibility of the mediated oxidation process and that this process is competitive with direct oxidation. The oxidants are produced under optimized conditions using the same anodic material applied for the direct degradation of organics, thus avoiding efficiency losses associated with mass transfer limitations in the degradation of dilute organic solutions. Thus, using the ClO2 gaseous oxidant, a concentration of 0.1 mM of methomyl from a solution containing 500 mL is completely removed with an energy consumption as low as 50 Wh. The application of the same energy to a direct electrolytic process for treating the same wastewater can only reach less than half of this removal. These findings may have a very important application in the use of electrochemical technology to achieve the remediation of persistent pollutants in wastewater, where their low concentrations typically make direct processes very inefficient.
RESUMO
Taphonomic works aim at discovering how paleontological and archaeofaunal assemblages were formed. They also aim at determining how hominin fossils were preserved or destroyed. Hominins and other mammal carnivores have been co-evolving, at least during the past two million years, and their potential interactions determined the evolution of human behavior. In order to understand all this, taxon-specific carnivore agency must be effectively identified in the fossil record. Until now, taphonomists have been able to determine, to some degree, hominin and carnivore inputs in site formation, and their interactions in the modification of part of those assemblages. However, the inability to determine agency more specifically has hampered the development of taphonomic research, whose methods are virtually identical to those used several decades ago (lagged by a high degree of subjectivity). A call for more objective and agent-specific methods would be a major contribution to the advancement of taphonomic research. Here, we present one of these advances. The use of computer vision (CV) on a large data set of images of tooth marks has enabled the objective discrimination of taxon-specific carnivore agency up to 88% of the testing sample. We highlight the significance of this method in an interdisciplinary interplay between traditional taphonomic-paleontological analysis and artificial intelligence-based computer science. The new questions that can be addressed with this will certainly bring important changes to several ideas on important aspects of the human evolutionary process.
Assuntos
Carnívoros , Hominidae , Dente , Animais , Humanos , Inteligência Artificial , Osso e Ossos , Fósseis , ComputadoresRESUMO
Recent Plio-Pleistocene hominin findings have revealed the complexity of human evolutionary history and the difficulties involved in its interpretation. Moreover, the study of hominin long bone remains is particularly problematic, since it commonly depends on the analysis of fragmentary skeletal elements that in many cases are merely represented by small diaphyseal portions and appear in an isolated fashion in the fossil record. Nevertheless, the study of the postcranial skeleton is particularly important to ascertain locomotor patterns. Here we report on the discovery of a robust hominin femoral fragment (OH 84) at the site of Amin Mturi Korongo dated to 1.84 Ma (Olduvai Bed I). External anatomy and internal bone structure of OH 84 were analyzed and compared with previously published data for modern humans and chimpanzees, as well as for Australopithecus, Paranthropus and Homo specimens ranging from the Late Pliocene to Late Pleistocene. Biomechanical analyses based on transverse cross-sections and the comparison of OH 84 with another robust Olduvai specimen (OH 80) suggest that OH 84 might be tentatively allocated to Paranthropus boisei. More importantly, the identification of a unique combination of traits in OH 84 could indicate both terrestrial bipedalism and an arboreal component in the locomotor repertoire of this individual. If interpreted correctly, OH 84 could thus add to the already mounting evidence of substantial locomotor diversity among Early Pleistocene hominins. Likewise, our results also highlight the difficulties in accurately interpreting the link between form and function in the human fossil record based on fragmentary remains, and ultimately in distinguishing between coeval hominin groups due to the heterogeneous pattern of inter- and intraspecific morphological variability detected among fossil femora.
Assuntos
Hominidae , Animais , Humanos , Hominidae/anatomia & histologia , Fêmur/anatomia & histologia , Pan troglodytes , Evolução Biológica , Fósseis , África OrientalRESUMO
In this work, a new coating of boron-doped diamond ultra-nanocrystalline (U-NBDD), tailored to prevent massive formation of perchlorates during disinfection, is evaluated as electrode for the reclaiming of treated secondary wastewater by the electrochemically assisted disinfection process. Results obtained are compared to those obtained by using a standard electrode (STD) that was evaluated as a standard in previous research showing outstanding performance for this application. First tests were carried out to evaluate the chlorine speciation obtained after the electrolysis of synthetic chloride solutions at two different ranges of current densities. Concentrations of hypochlorite obtained using the U-NBDD anode at 25 mA cm-2 were 1.5-fold higher, outperforming STD anode; however, at 300 mA cm-2, an overturn on the behavior of anodes occurs where the amount of hypochlorite produced on STD anode was 1.5-fold higher. Importantly, at low current density the formation of chlorates and perchlorates is null using U-NBDD. Then, the disinfection of the real effluent of the secondary clarifier of a municipal wastewater treatment facility is assessed, where inactivation of Escherichia coli is achieved at low charge applied per volume electrolyzed (0.08 A h L-1) at 25 mA cm-2 using the U-NBDD. These findings demonstrate the appropriateness of the strategy followed in this work to obtain safer electro-disinfection technologies for the reclaiming of treated wastewater.
Assuntos
Águas Residuárias , Poluentes Químicos da Água , Diamante/química , Desinfecção/métodos , Ácido Hipocloroso , Percloratos , Eletrólise/métodos , Eletrodos , Oxirredução , Poluentes Químicos da Água/químicaRESUMO
Objective analytical identification methods are still a minority in the praxis of paleobiological sciences. Subjective interpretation of fossils and their modifications remains a nonreplicable expert endeavor. Identification of African bovids is a crucial element in the reconstruction of paleo-landscapes, ungulate paleoecology, and, eventually, hominin adaptation and ecosystemic reconstruction. Recent analytical efforts drawing on Fourier functional analysis and discrimination methods applied to occlusal surfaces of teeth have provided a highly accurate framework to correctly classify African bovid tribes and taxa. Artificial intelligence tools, like computer vision, have also shown their potential to be objectively more accurate in the identification of taphonomic agency than human experts. For this reason, here we implement some of the most successful computer vision methods, using transfer learning and ensemble analysis, to classify bidimensional images of African bovid teeth and show that 92% of the large testing set of images of African bovid tribes analyzed could be correctly classified. This brings an objective tool to paleoecological interpretation, where bovid identification and paleoecological interpretation can be more confidently carried out.
Assuntos
Inteligência Artificial , Ecossistema , Bovinos , Humanos , Animais , Fósseis , Mamíferos , Computadores , Aprendizado de MáquinaRESUMO
This study upgrades the sustainability of environmental electrochemical technologies with a novel approach consisting of the in-situ cogeneration and use of two important oxidants, hydrogen peroxide (H2O2) and Caro's acid (H2SO5), manufactured with the same innovative cell. This reactor was equipped with a gas diffusion electrode (GDE) to generate cathodically H2O2, from oxygen reduction reaction, a boron doped diamond (BDD) electrode to obtain H2SO5, via anodic oxidation of dilute sulfuric acid, and a proton exchange membrane to separate the anodic and the cathodic compartment, preventing the scavenging effect of the interaction of oxidants. A special design of the inlet helps this cell to reach simultaneous efficiencies as high as 99% for H2O2 formation and 19.7% for Caro's acid formation, which means that the cogeneration reaches efficiencies over 100% in the uses of electric current to produce oxidants. The two oxidants' streams produced were used with different configurations for the degradation of three volatile organic compounds (benzene, toluene, and xylene) in a batch reactor equipped with a UVC-lamp. Among different alternatives studied, the combination H2SO5/H2O2 under UVC irradiation showed the best results in terms of degradation efficiency, demonstrating important synergisms as compared to the bare technologies.
Assuntos
Oxidantes , Poluentes Químicos da Água , Peróxido de Hidrogênio/química , Oxirredução , Eletrodos , Boro/química , Diamante/química , Poluentes Químicos da Água/químicaRESUMO
The in-situ removal of lindane from spiked soil was studied using cork barriers combined with electrokinetic and ohmic heating soil remediation processes. Both vertical and horizontal cork barriers have been evaluated to retain pollutants mobilized by electro-osmotic flow or volatilized by ohmic heating. Moreover, the addition of surfactant solutions in electrolyte wells has been evaluated to promote the dragging of lindane by electrokinetic fluxes. Results indicated that the drag of lindane by liquid flows is not as important as expected, opposite to what happened with the dragging by gaseous flows. The retention of gaseous lindane was also confirmed in adsorption tests carried out in a column packed with cork granules. The addition of surfactant had a very limited effect on the mobility of lindane, and dragging of this species to the electrode wells or to a permeable reactive barrier. On the contrary, the reactivity of lindane during the electrochemical treatments is relevant due to the electrokinetic basic front promoting the in-situ conversion of lindane into less chlorinated pollutants.
RESUMO
Pathogenic microorganisms are a major concern in indoor environments, particularly in sensitive facilities such as hospitals, due to their potential to cause nosocomial infections. This study evaluates the concentration of airborne bacteria and fungi in the University Hospital Complex of Albacete (Spain), comparing the results with recent literature. Staphylococcus is identified as the most prevalent bacterial genus with a percentage distribution of 35%, while Aspergillus represents the dominant fungal genus at 34%. The lack of high Technology Readiness Levels (TRL 6, TRL 7) for effective indoor air purification requires research efforts to bridge this knowledge gap. A screening of disinfection technologies for pathogenic airborne microorganisms such as bacteria and fungi is conducted. The integration of filtration, irradiation or and (electro)chemical gas treatment systems in duct flows is discussed to enhance the design of the air-conditioning systems for indoor air purification. Concerns over microbial growth have led to recent studies on coating commercial fibrous air filters with antimicrobial particles (silver nanoparticles, iron oxide nanowires) and polymeric materials (polyaniline, polyvinylidene fluoride). Promising alternatives to traditional short-wave UV-C energy for disinfection include LED and Far-UVC irradiation systems. Additionally, research explores the use of TiO2 and TiO2 doped with metals (Ag, Cu, Pt) in filters with photocatalytic properties, enabling the utilization of visible or solar light. Hybrid photocatalysis, combining TiO2 with polymers, carbon nanomaterials, or MXene nanomaterials, enhances the photocatalytic process. Chemical treatment systems such as aerosolization of biocidal agents (benzalkonium chloride, hydrogen peroxide, chlorine dioxide or ozone) with their possible combination with other technologies such as adsorption, filtration or photocatalysis, are also tested for gas disinfection. However, the limited number of studies on the use of electrochemical technology poses a challenge for further investigation into gas-phase oxidant generation, without the formation of harmful by-products, to raise its TRL for effectively inactivating airborne microorganisms in indoor environments.
Assuntos
Poluição do Ar em Ambientes Fechados , Nanopartículas Metálicas , Humanos , Prata , Raios Ultravioleta , Desinfecção/métodos , Poluição do Ar em Ambientes Fechados/prevenção & controleRESUMO
In this work, it is studied the photolysis, electrolysis, and photo-electrolysis of a mixture of pharmaceutics (sulfadiazine, naproxen, diclofenac, ketoprofen and ibuprofen) contained in two very different types of real water matrices (obtained from surface and porewater reservoirs), trying to clarify the role of the matrix on the degradation of the pollutants. To do this, a new metrological approach was also developed for screening of pharmaceuticals in waters by capillary liquid chromatography mass spectrometry (CLC-MS). This allows the detection at concentrations lower than 10 ng mL-1. Results obtained in the degradation tests demonstrate that inorganic composition of the water matrix directly influences on the efficiency of the drugs removal by the different EAOPs and better degradation results were obtained for experiments carried out with surface water. The most recalcitrant drug studied was ibuprofen for all processes evaluated, while diclofenac and ketoprofen were found to be the easiest drugs for being degraded. Photo-electrolysis was found to be more efficient than photolysis and electrolysis, and the increase in the current density was found to attain a slight improvement in the removal although with an associated huge increase in the energy consumption. The main reaction pathways for each drug and technology were also proposed.
Assuntos
Cetoprofeno , Poluentes Químicos da Água , Diclofenaco/química , Cetoprofeno/análise , Ibuprofeno/análise , Água/química , Poluentes Químicos da Água/análise , Preparações FarmacêuticasRESUMO
H2S is a gaseous compound that contributes to air pollution. In this work, the electrochemical oxidation treatment of gaseous streams polluted with H2S is evaluated using a jet mixer and electrochemical cell device, in which the performance of electrolytic and electro-Fenton assisted absorption processes are compared. Results demonstrate the feasibility of both processes to remove H2S, reaching coulombic efficiencies of nearly 100% in the electrolytic assisted absorption, and 70-80% in the electro-Fenton assisted absorption. Aqueous solutions containing phosphate salts as electrolyte were found to be suitable as absorbents for the process. Efficiency in the cathodic production of H2O2 in these solutions using the experimental device was found to be as high as 32.8% (1.184 mgH2O2/min) at 12 °C and atmospheric pressure. Sequential formation of SO2 and SO3 is obtained by the oxidation of H2S contained in the gas. These species are hydrolysed, and a part remained in the absorbent as SO32- and SO42-, while the rest is dragged in the outlet gas. SO3 production is promoted by electrolytic assisted absorption and polysulphides by the electro-Fenton technology. Low concentrations of elemental sulphur are detected in the solid suspensions formed during the process.
Assuntos
Gases , Poluentes Químicos da Água , Peróxido de Hidrogênio/química , Eletrólise , Oxirredução , Eletrodos , Poluentes Químicos da Água/químicaRESUMO
The composition and concentration of airborne microorganisms in hospital indoor air has been reported to contain airborne bacteria and fungi concentrations ranged 101-103 CFU/m3 in inpatients facilities which mostly exceed recommendations from the World Health Organization (WHO). In this work, a deeper knowledge of the performance of airborne microorganisms would allow improving the designs of the air-conditioning installations to restrict hospital-acquired infections (HAIs). A solution containing Escherichia coli (E. coli) as a model of airborne bacteria was nebulized using the Collison nebulizer to simulate bioaerosols in various hospital areas such as patients' rooms or bathrooms. Results showed that the bioaerosol source had a significant influence on the airborne bacteria concentrations since 4.00 102, 6.84 103 and 1.39 104 CFU mL-1 were monitored during the aerosolization for 10 min of urine, saliva and urban wastewater, respectively. These results may be explained considering the quite narrow distribution profile of drop sizes around 1.10-1.29 µm obtained for urban wastewater, with much vaster distribution profiles during the aerosolization of urine or saliva. The airborne bacteria concentration may increase up to 107 CFU mL-1 for longer sampling times and higher aerosolization pressures, causing several cell damages. The cell membrane damage index (ID) can vary from 0 to 1, depending on the genomic DNA releases from bacteria. In fact, the ID of E. coli was more than two times higher (0.33 vs. 0.72) when increasing the pressure of air flow was applied from 1 to 2 bar. Finally, the ventilation air flow also affected the distribution of bioaerosols due to its direct relationship with the relative humidity of indoor air. Specifically, the airborne bacteria concentration diminished almost below 3-logs by applying more than 10 L min-1 during the aerosolization of urine due to their inactivation by an increase in their osmotic pressure.
Assuntos
Microbiologia do Ar , Poluição do Ar em Ambientes Fechados , Humanos , Poluição do Ar em Ambientes Fechados/análise , Águas Residuárias , Escherichia coli , Bactérias/genética , Fungos , Aerossóis/análise , Hospitais , Monitoramento AmbientalRESUMO
This paper focuses on the evaluation of the mobility of four hexachlorocyclohexane (HCH) isomers by soil vapor extraction (SVE) coupled with direct electrokinetic (EK) treatment without adding flushing fluids. SVE was found to be very efficient and remove nearly 70 % of the four HCH in the 15-days of the tests. The application of electrokinetics produced the transport of HCH to the cathode by different electrochemical processes, which were satisfactorily modelled with a 1-D transport equation. The increase in the electric field led to an increase in the transport of pollutants, although 15â days was found to be a very short time for an efficient transportation of the pollutants to the nearness of the cathode. Loss of water content in the vicinity of the cathode warns about the necessity of using electrokinetic flushing technologies instead of simple direct electrokinetics. Thus, results point out that direct electrokinetic treatment without adding flushing fluids produced low current intensities and ohmic heating that contributes negatively to the performance of the SVE process. No relevant differences were found among the removal of the four isomers, neither in SVE nor in EK processes.
RESUMO
Human carnivory is atypical among primates. Unlike chimpanzees and bonobos, who are known to hunt smaller monkeys and eat them immediately, human foragers often cooperate to kill large animals and transport them to a safe location to be shared. While it is known that meat became an important part of the hominin diet around 2.6-2 Mya, whether intense cooperation and food sharing developed in conjunction with the regular intake of meat remains unresolved. A widespread assumption is that early hominins acquired animal protein through klepto-parasitism at felid kills. This should be testable by detecting felid-specific bone modifications and tooth marks on carcasses consumed by hominins. Here, deep learning (DL) computer vision was used to identify agency through the analysis of tooth pits and scores on bones recovered from the Early Pleistocene site of DS (Bed I, Olduvai Gorge). We present the first objective evidence of primary access to meat by hominins 1.8 Mya by showing that the most common securely detectable bone-modifying fissipeds at the site were hyenas. The absence of felid modifications in most of the carcasses analyzed indicates that hominins were the primary consumers of most animals accumulated at the site, with hyenas intervening at the post-depositional stage. This underscores the role of hominins as a prominent part of the early Pleistocene African carnivore guild. It also stresses the major (and potentially regular) role that meat played in the diet that configured the emergence of early Homo.
Assuntos
Carnívoros , Hominidae , Hyaenidae , Animais , Humanos , Pan troglodytes , Osso e Ossos , Carne , Pan paniscusRESUMO
This study reports the hydrogen production using TiO2 based composite polybenzimidazole membranes through the SO2 depolarized electrolysis that requires lower energy input than the direct water electrolysis. Composite membranes prepared and studied in this work showed very promising results in terms of proton conductivity, chemical stability, and crossover. Thus, a reduction in SO2 crossover was observed with the increase of the concentration of TiO2, obtaining reductions as high as 42% with the 3.0 wt% TiO2-PBI membrane at 120 °C. Higher hydrogen production rates and Faradaic efficiencies were achieved by all the composite membranes, with an optimum for the 1.0 wt% TiO2-PBI membrane (with this membrane, the production of hydrogen increased a 53% at 110 °C and a 49% at 120 °C as compared with the standard PBI membrane), demonstrated the benefit of the use of composite membranes with respect to the standard one for green hydrogen production.
RESUMO
This work examines the role of oxygen supply in the improvement of the hydrogen peroxide (H2O2) electrochemical production efficiency and the generation of high H2O2 concentrations in electrochemical processes operated in a discontinuous mode. To conduct this study, a highly efficient Printex L6 carbon-based gas diffusion electrode (GDE) as a cathode was employed for the electrogeneration of H2O2 in a flow-by reactor and evaluated the effects of lowering the operation temperature (to increase solubility) and increasing the air supply in the system on H2O2 electrogeneration. The results obtained in this study show that unlike what is expected in flow-through reactors, the efficiency in the H2O2 production is not affected by the solubility of oxygen when GDE is employed in the electrochemical process (using the flow-by reactor); i.e., the efficiency of H2O2 production is not significantly dependent on O2 solubility, temperature, and pressure. The application of the proposed PL6C-based GDE led to the generation of accumulated H2O2 of over 3 g L-1 at a high current density. It should be noted, however, that the application of the electrocatalyst at lower current densities resulted in higher energy efficiency in terms of H2O2 production. Precisely, a specific production of H2O2 as high as 131 g kWh-1 was obtained at 25 mA cm-2; the energy efficiency (in terms of H2O2 production) values obtained in this study based on the application of the proposed GDE in a flow-by reactor at low current densities were found to be within the range of values recorded for H2O2 production techniques that employ flow-through reactors.
RESUMO
Misiam is a modern wildebeest-dominated accumulation situated in a steep ravine covered with dense vegetation at Olduvai Gorge (Tanzania). It is interpreted here as a leopard lair to which carcasses have been transported for several years. Felid-specific bone damage patterns, felid-typical skeletal part profiles, taxonomic specialization and the physical presence of leopards observed by the authors show that leopards at Misiam can be specialized medium-sized carcass accumulators. Hyenas also intervened at intervals in the modification of the retrieved faunal assemblage. This makes Misiam a carnivore palimpsest. Here, we additionally show that leopards only transport and accumulate carcasses on occasions, that they can seem highly specialized despite being dietary generalists, and that such a behaviour may be prompted by seasonal competition or during the breeding season or both. Misiam is the first open-air leopard lair with a dense bone accumulation reported. There, leopards engaged in intensive accumulation of carcasses during the wet season, when the southern Serengeti short-grass plains undergo the effect of the famous wildebeest migration and this migratory species reaches the gorge. The ecological importance of this behaviour and its relevance as a proxy for reconstructing prehistoric carnivore behaviours are discussed.