Left Atrial Decompression With the HeartMate3 in Heart Failure With Preserved Ejection Fraction: Virtual Fitting and Hemodynamic Analysis.

Effective treatment of heart failure with preserved ejection fraction (HFpEF) remains an unmet medical need. Although left atrial decompression using mechanical circulatory support devices was previously suggested, the heterogeneous HFpEF population and the lack of tailored devices have prevented the translation into clinical practice. This study aimed to evaluate the feasibility of left atrial decompression in HFpEF patients with a HeartMate 3 (HM3, Abbott Inc, Chicago, USA) in silico and in vitro . Anatomic compatibility of the HM3 pump was assessed by virtual device implantation into the left atrium through the left atrial appendage (LAA) and left atrial posterior wall (LAPW) of 10 HFpEF patients. Further, the efficacy of left atrial decompression was investigated experimentally in a hybrid mock loop, replicating the hemodynamics of an HFpEF phenotype at rest and exercise conditions. Virtual implantation without substantial intersection with surrounding tissues was accomplished through the LAA in 90% and 100% through the LAPW. Hemodynamic analysis in resting conditions demonstrated normalization of left atrial pressures without backflow at a pump speed of around 5400 rpm, whereas a range of 6400-7400 rpm was required during exercise. Therefore, left atrial decompression with the HM3 may be feasible in terms of anatomic compatibility and hemodynamic efficacy.

Feasibility of an Animal Model for Cavopulmonary Support With a Double-Outflow Pump.

Both single- and double-outflow cavopulmonary assist devices (CPADs) were recently proposed for the Fontan population, whereas single-outflow configurations were evaluated in large animal trials and double-outflow concepts are lacking an equivalent in vivo assessment. The aim of this study was to test the hemodynamic properties of a double-outflow CPAD device in an acute sheep model. The two inflow cannulae of a CPAD were anastomosed to the caval veins. Outflow graft connection was performed via end-to-side anastomosis to the right (RPA) and main pulmonary artery (MPA). Speed ramp protocols were conducted, and hemodynamic effects were monitored in terms of caval flows, cardiac output (CO), central venous pressure (CVP), pulmonary artery pressure (PAP), and left atrial pressure (LAP). Six experiments were conducted (53.35 ± 5.1 kg). In three experiments, the animal model was established, the CPAD was examined, and restoration of biventricular equivalency in terms of venous return was achieved. Venous pressures (CVP) declined linearly with increasing pump speed (r > 0.879), whereas caval flow (r > 0.973), CO (r > 0.993), PAP (r > 0.973), and LAP (r > 0.408) increased. Despite the considerable complexity of the sheep model caused by the sheep pulmonary arterial anatomy that requires substantial graft bending, the CPAD was evaluated in three acute experiments and showed the potential to completely substitute a subpulmonary ventricle.

Investigation of hemodynamics in the assisted isolated porcine heart.

BACKGROUND: Currently, the interaction between rotary blood pumps (RBP) and the heart is investigated in silico, in vitro, and in animal models. Isolated and defined changes in hemodynamic parameters are unattainable in animal models, while the heart-pump interaction in its whole complexity cannot be modeled in vitro or in silico. AIM: The aim of this work was to develop an isolated heart setup to provide a realistic heart-pump interface with the possibility of easily adjusting hemodynamic parameters. METHODS: A mock circuit mimicking the systemic circulation was developed. Eight porcine hearts were harvested using a protocol similar to heart transplantation. Then, the hearts were resuscitated using Langendorff perfusion with rewarmed, oxygenated blood. An RBP was implanted and the setup was switched to the "working mode" with the left heart and the RBP working as under physiologic conditions. Both the unassisted and assisted hemodynamics were monitored. RESULTS: In the unassisted condition, cardiac output was up to 9.5 l/min and dP/dtmax ranged from 521 to 3621 mmHg/s at a preload of 15 mmHg and afterload of 70 mmHg. With the RBP turned on, hemodynamics similar to heart-failure patients were observed in each heart. Mean pump flow and flow pulsatility ranged from 0 to 11 l/min. We were able to reproduce conditions with an open and closed aortic valve as well as suction events. CONCLUSIONS: An isolated heart setup including an RBP was developed, which combines the advantages of in silico/vitro methods and animal experiments. This tool thus provides further insight into the interaction between the heart and an RBP.