Simulated gastric leachate of 3D printer metal-fill filaments induces cytotoxic effects in rat and human intestinal models.

Metals are used in 3-dimensional (3D) printer filaments in the manufacture of 3D printed objects. Exposure to the filaments, printed objects and emissions from printing may pose health risks from release of toxic metals. This study investigated the cytotoxicity of extruded 3D printer filament leachates in rat and human intestinal cells. Copper-, bronze-, and steel-fill extruded filaments were incubated in acidic media for 2 h. Leachates were adjusted to pH 7 and cells exposed for 4 or 24 h. Concentration- and time-dependent decreases in rat and human cell viability were observed using a colorimetric assay and confirmed by microscopy. Copper- and bronze-fill leachates were more cytotoxic than steel. Copper-fill leachates had the highest copper concentrations by ICP-MS. Exposure to CuSO4 resulted in concentration-dependent cytotoxicity in rat cells. The copper chelator bathocuproine disulphonate alleviated cytotoxicity of CuSO4 and copper-fill leachate, suggesting that copper ions have a role in the cytotoxicity. Hydrogen peroxide increased and glutathione decreased in rat cells exposed to copper-fill leachate, suggesting the formation of reactive oxygen species. Overall, our data indicate that metals released from the acidic exposure of print objects using metal-fill filaments, especially copper, are toxic to rat and human intestinal cells and additional studies are needed.

Extraction and concentration of nanoplastic particles from aqueous suspensions using functionalized magnetic nanoparticles and a magnetic flow cell.

Although a considerable knowledge base exists for environmental contamination from nanoscale and colloidal particles, significant knowledge gaps exist regarding the sources, transport, distribution, and effects of microplastic pollution (plastic particles < 5 mm) in the environment. Even less is known regarding nanoplastic pollution (generally considered to be plastic particles < 1 µm). Due to their small size, nanoplastics pose unique challenges and potential risks. We herein report a technique focused on the concentration and measurement of nanoplastics in aqueous systems. Hydrophobically functionalized magnetic nanoparticles (HDTMS-FeNPs) were used as part of a method to separate and concentrate nanoplastics from environmentally relevant matrices, here using metal-doped polystyrene nanoplastics (PAN-Pd@NPs) to enable low-level detection and validation of the separation technique. Using a magnetic separation flow cell, PAN-Pd@NPs were removed from suspensions and captured on regenerated cellulose membranes. Depending on the complexity of solution chemistry, variable extraction rates were possible. PAN-Pd@ NPs were recovered from ultrapure water, synthetic freshwater, synthetic freshwater with a model natural organic matter isolate (NOM; Suwannee River Humic Acid), and from synthetic marine water, with recoveries for PAN-Pd@NPs of 84.9%, 78.9%, 70.4%, and 56.1%, respectively. During the initial method testing, it was found that the addition of NaCl was needed in the ultrapure water, synthetic freshwater and synthetic fresh water with NOM to induce particle aggregation and attachment. These results indicate that magnetic nanoparticles in combination with a flow-through system is a promising technique to extract nanoplastics from aqueous suspensions with various compositions.

Characterization of 3D printing filaments containing metal additives and their particulate emissions.

Polylactic acid (PLA) filaments are widely used in fused filament fabrication (FFF) processes (3D printing). Filament additives such as metallic particles incorporated into PLA to modify functional and aesthetic features of print objects are becoming increasingly popular. However, the identities and concentrations of low percentage and trace metals in these filaments have not been well described in either the literature or product safety information included with the product. We report the structures and concentrations of metals in selected Copperfill, Bronzefill and Steelfill filaments. We also report size-weighted number concentrations and size-weighted mass concentrations of particulate emissions as a function of print temperature for each filament. Particulate emissions were heterogenous in shape and size with airborne particles below 50 nm diameter dominating the size-weighted particle concentrations and larger particles (approximately 300 nm) dominating the mass weighted particle concentration. Results indicate that potential exposure to particles in the nano-size range increase when using print temperatures above 200o C. Because inhalation exposure to nanoparticles has been linked to adverse health outcomes, we suggest that using lower print temperatures for specific metal-fill filaments may reduce their operational hazard.

Human exposure to metals in consumer-focused fused filament fabrication (FFF)/ 3D printing processes.

Fused filament fabrication (FFF) or 3D printing is a growing technology used in industry, cottage industry and for consumer applications. Low-cost 3D printing devices have become increasingly popular among children and teens. Consequently, 3D printers are increasingly common in households, schools, and libraries. Because the operation of 3D printers is associated with the release of inhalable particles and volatile organic compounds (VOCs), there are concerns of possible health implications, particularly for use in schools and residential environments that may not have adequate ventilation such as classrooms bedrooms and garages, etc. Along with the growing consumer market for low-cost printers and printer pens, there is also an expanding market for a range of specialty filaments with additives such as inorganic colorants, metal particles and nanomaterials as well as metal-containing flame retardants, antioxidants, heat stabilizers and catalysts. Inhalation of particulate-associated metals may represent a health risk depending on both the metal and internal dose to the respiratory tract. Little has been reported, however, about the presence, speciation, and source of metals in the emissions; or likewise the effect of metals on emission processes and toxicological implications of these 3D printer generated emissions. This report evaluates various issues including the following: metals in feedstock with a focus on filament characteristics and function of metals; the effect of metals on the emissions and metals detected in emissions; printer emissions, particle formation, transport, and transformation; exposure and translation to internal dose; and potential toxicity on inhaled dose. Finally, data gaps and potential areas of future research are discussed within these contexts.

3D Printer Particle Emissions: Translation to Internal Dose in Adults and Children.

Desktop fused deposition modeling (FDM®) three-dimensional (3D) printers are becoming increasingly popular in schools, libraries, and among home hobbyists. FDM® 3D printers have been shown to release ultrafine airborne particles in large amounts, indicating the potential for inhalation exposure and consequent health risks among FDM® 3D printer users and other room occupants including children. These particles are generated from the heating of thermoplastic polymer feedstocks during the FDM® 3D printing process, with the most commonly used polymers being acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA). Risk assessment of these exposures demands estimation of internal dose, especially to address intra-human variability across life stages. Dosimetry models have proven to effectively translate particle exposures to internal dose metrics relevant to evaluation of their effects in the respiratory tract. We used the open-access multiple path particle dosimetry (MPPD v3.04) model to estimate inhaled particle deposition in different regions of the respiratory tract for children of various age groups from three months to eighteen years old adults. Mass concentration data for input into the MPPD model were calculated using particle size distribution and density data from experimental FDM® 3D printer emissions tests using both ABS and PLA. The impact of changes in critical parameters that are principal determinants of inhaled dose, including: sex, age, and exposure duration, was examined using input parameter values available from the International Commission on Radiological Protection. Internal dose metrics used included regional mass deposition, mass deposition normalized by pulmonary surface area, surface area of deposited particles by pulmonary surface area, and retained regional mass. Total mass deposition was found to be highest in the 9-year-old to 18-year-old age groups with mass deposition by pulmonary surface area highest in 3-month-olds to 9-year-olds and surface area of deposited particles by pulmonary surface area to be highest in 9-year-olds. Clearance modeling revealed that frequent 3D printer users are at risk for an increased cumulative retained dose.

Particle and volatile organic compound emissions from a 3D printer filament extruder.

Fused Deposition Modeling (FDM®), also known as Fused Filament Fabrication (FFF), 3D printers have been shown in numerous studies to emit ultrafine particles and volatile organic compounds (VOCs). Filament extruders, designed to create feedstocks for 3D printers, have recently come onto the consumer market for at-home hobbyists as an alternative to buying 3D printer filaments. These instruments allow for the creation of 3D printer filaments from raw plastic pellets. Given the similarity in processes and materials used by 3D printers and filament extruders, we hypothesized that filament extruders may also release ultrafine particle emissions and VOCs. An off-the-shelf filament extruder was operated in a 2 m3 chamber using three separate feedstocks: acrylonitrile butadiene styrene (ABS) pellets, pulverized poly-lactic acid (PLA), and PLA pellets. Ultrafine particle emissions were measured in real-time using a scanning mobility particle sizer and thermal desorption tubes were used for both non-targeted and targeted analysis of VOCs present in emissions. Ultrafine particle number emission rates were comparable to those found in 3D printer studies with the greatest to least emission rates from ABS pellets, pulverized PLA, and PLA pellets, respectively. In addition, the majority of particles released were found to be ultrafine (1-100 nm), similar to 3D printer studies. A variety of VOCs were identified using the ABS feedstock, including styrene and ethylbenzene, and PLA feedstock. Styrene average mass concentration amounts were found to be near the EPA Integrated Risk Information System Reference Concentration for Inhalation Exposure for 3 min and 5 min samples. Further studies will be needed to determine the impact on emissions of environmental volume, air exchange rate, and extruder settings such as extrusion speed and temperature. The results support the hypothesis that use of a filament extruder may present an additional exposure risk to 3D printer hobbyists.

Inclusion of Dancer Wellness Education Programs in U.S. Colleges and Universities: A 20-Year Update.

During the 1990s dancer wellness education began to be codified and understood empirically in U.S. colleges and universities. Those efforts stemmed from a burgeoning knowledge base in dance medicine and science that continues to evolve. However, the current status of dancer wellness education remains largely undocumented. The purpose of this study was to explore the inclusion of dancer wellness education in U.S. colleges and universities. The results were derived from a cross-sectional study of 199 higher education dance administrators at 4-year institutions that were selected using stratified random sampling procedures with data collected through an online survey. Seventy-two participants (36.18%) completed at least part of the survey, and of those 62 (86.11%) completed the entire survey. The majority of dance programs were undergraduate-only (71%), not accredited by the National Association of Schools of Dance (67%), and emphasized dance performance and choreography (89%). Sixty percent offered a formal dancer wellness program, 70% had at least one dancer wellness specialist on faculty, and 20% offered training programs to become dancer wellness specialists. Fewer than half (42.19%) preferred their faculty to have college or university level study in dancer wellness, and only 17.19% required it. Of 11 possible curricular topics, the typical undergraduate program included 64.52% and the typical graduate program 51.87%. Regardless of program level, the top five topics were anatomy, kinesiology, somatics, dance conditioning, and dance injuries. The average school offered 58% of identified supplementary programs at "high levels." Only modest differences were found between programs based on degree level, accreditation status, or program affiliation. Although some positive trends in the evolution of dancer wellness education have occurred over the last two decades, there remains a need for ongoing advocacy and widespread implementation in U.S. colleges and universities.

In vitro intestinal toxicity of commercially available spray disinfectant products advertised to contain colloidal silver.

The use of colloidal silver-containing products as dietary supplements, immune boosters and surface disinfectants has increased in recent years which has elevated the potential for human exposure to silver nanoparticles and ions. Product mislabeling and long-term use of these products may put consumers at risk for adverse health outcomes including argyria. This study assessed several physical and chemical characteristics of five commercial products as well as their cytotoxicity using a rat intestinal epithelial cell (IEC-6) model. Concentrations of silver were determined for both the soluble and particulate fractions of the products. Primary particle size distribution and elemental composition were determined by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. Hydrodynamic diameters were measured using nanoparticle tracking analysis (NTA) and dynamic light scattering (DLS). The effect of gastrointestinal (GI) simulation on the colloidal silver products was determined using two systems. First, physical and chemical changes of the silver nanoparticles in these products was assessed after exposure to Synthetic Stomach Fluid (SSF) resulting in particle agglomeration, and the appearance of AgCl on the surfaces and between particles. IEC-6 cells were exposed for 24 h to dilutions of the products and assessed for cell viability. The products were also treated with a three-stage simulated GI system (stomach and intestinal fluids) prior to exposure of the IEC-6 cells to the isolated silver nanoparticles. Cell viability was affected by each of the consumer products. Based on the silver nitrate and commercial silver nanoparticle dose response, the cytotoxicity for each of the colloidal silver products was attributed to the particulate silver, soluble silver or non­silver matrix constituents.

Transformation of Silver Nanoparticle Consumer Products during Simulated Usage and Disposal.

Twenty-two silver nanoparticle (AgNP) consumer products (CPs) were analyzed with respect to their silver speciation. Three CPs and three lab-synthesized particles were selected to simulate environmental fate and transport by simulating their intended usage and disposal methods. Since many of these products are meant for ingestion, we simulated their usage by exposing them to human synthetic stomach fluid followed by exposure to wastewater sludge. We found that during the products individual exposure to wastewater sludge, the conversion rate of silver to AgCl and Ag2S was affected by both the amount of silver ion present and the properties of the AgNP. The rates of conversion of metallic silver to silver sulfide was heavily dependent on the particle size for the lab-synthesized particles, with 90 nm PVP-capped particles reacting to a much lesser extent than the 15 nm PVP-capped or the citrate-capped particles. We observed similar sulfidation rates on two of the tested CPs with the 15 nm lab-synthesized particles despite containing silver nanoparticles >5 times larger, indicating the presence of other influencing factors. Pre-treatment with synthetic stomach fluid modified the rates of Ag2S formation. Due to the variable composition of CPs and the conditions they are exposed to between manufacture, sale, use, and disposal, their final composition may be somewhat unpredictable in the environment. In the present study, we have achieved a more accurate approximation of the expected interactions between silver nanoparticle-containing CPs and environmental media by utilizing real CPs and evaluating them with solid phase and aqueous phase analytical techniques.

In vitro intestinal toxicity of copper oxide nanoparticles in rat and human cell models.

Human oral exposure to copper oxide nanoparticles (NPs) may occur following ingestion, hand-to-mouth activity, or mucociliary transport following inhalation. This study assessed the cytotoxicity of Cupric (II) oxide (CuO) and Cu2O-polyvinylpyrrolidone (PVP) coated NPs and copper ions in rat (intestine epithelial cells; IEC-6) and human intestinal cells, two- and three-dimensional models, respectively. The effect of pretreatment of CuO NPs with simulated gastrointestinal (GI) fluids on IEC-6 cell cytotoxicity was also investigated. Both dose- and time-dependent decreases in viability of rat and human cells with CuO and Cu2O-PVP NPs and Cu2+ ions was observed. In the rat cells, CuO NPs had greater cytotoxicity. The rat cells were also more sensitive to CuO NPs than the human cells. Concentrations of H2O2 and glutathione increased and decreased, respectively, in IEC-6 cells after a 4-h exposure to CuO NPs, suggesting the formation of reactive oxygen species (ROS). These ROS may have damaged the mitochondrial membrane of the IEC-6 cells causing a depolarization, as a dose-related loss of a fluorescent mitochondrial marker was observed following a 4-h exposure to CuO NPs. Dissolution studies showed that Cu2O-PVP NPs formed soluble Cu whereas CuO NPs essentially remained intact. For GI fluid-treated CuO NPs, there was a slight increase in cytotoxicity at low doses relative to non-treated NPs. In summary, copper oxide NPs were cytotoxic to rat and human intestinal cells in a dose- and time-dependent manner. The data suggests Cu2O-PVP NPs are toxic due to their dissolution to Cu ions, whereas CuO NPs have inherent cytotoxicity, without dissolving to form Cu ions.

Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis.

Fused deposition modeling (FDM) 3D printers, the most popular choice among home hobbyists, have been shown to release volatile organic chemicals (VOCs) and billions of airborne particles per minute, indicating the potential for consumer inhalation exposure and consequent health risks. Publications on FDM 3D printer emissions however, contain large heterogeneity of testing methods and analytical procedures making it difficult to reach overall conclusions for particle characteristics or particle number emission rates across the field. In this publication, data were collected over the printing time from 3D printer emission studies including particle count diameters (PCDs) (nanometers), particle number concentrations (PNCs) (particles/cm3), and particle number emission rates (PNERs) (particles min-1). Despite heterogeneity in methods, the majority of particles released were reported as ultrafine in size (i.e., <100 nm) indicating that using both acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) may present a risk of exposure to respirable particles. Mean PNC emitted in 3D printing tests ranged over several orders of magnitude across publications with overall means of 300,980 particles/cm3 for ABS and 65,482 particles/cm3 for PLA. Although mean PNC data were available from only 7 of the 16 papers reviewed, ABS resulted in greater particle numbers than PLA suggesting increased exposure to ultrafine particles. A linear mixed model was fitted for mean PNCs to further explore the impact of nozzle temperature and filament material. Finally, the PNER calculation method especially regarding losses, varied widely across studies, and directly impacted the PNERs reported. To strengthen direct comparability of results going forward, it is recommended that standard emissions testing protocols be developed for FDM 3D printers and particle influxes and losses be more uniformly calculated.

Determination of Silver Nanoparticle Dose in vitro.

An important issue for interpreting in vitro nanomaterial testing is quantifying the dose delivered to target cells. Considerations include the concentration added to the culture, the proportion of the applied dose that interacts with the target cells, and the amount that is eventually absorbed by the target cells. Rapid and efficient techniques are needed to determine delivered doses. Previously, we demonstrated that TiO2 and silver nanoparticles (AgNP) were absorbed by cells in a dose dependent manner between 1 µg/ml and 30 µg/ml and were detected in cells by light scatter using a flow cytometer. Here, we compare four potential indices of the dose of AgNP to cells, including: inductively coupled plasma - mass spectrometry (ICP-MS); flow cytometry side scatter (SSC); and amount of silver deposited to the cell layer as estimated with both an integrated Volumetric Centrifugation Method - In Vitro Sedimentation, Diffusion and Dosimetry Model (VCM-ISDD) and a Distorted Grid (DG) model. A retinal pigment epithelial cell line was exposed to 20 nm or 75 nm citrate-coated AgNP for 24 hr. The relationships between particle sizes and internalized doses varied according to the dose metric. Twenty-four hours after exposure, the cell layer contained a greater mass of silver when treated with 75 nm AgNP than with 20 nm AgNP. When the dose was expressed as the number of particles or as the total surface area of absorbed particles, however, the reverse was true; the dose to the cells was higher after exposure to 20 than 75 nm AgNP. Flow cytometry SSC increased with dose for both sizes of AgNP, and was correlated with Ag in cells measured by ICP-MS. The rate of SSC increase was greater for 75 than for 20 nm AgNP, suggesting it could be used as an indicator of cellular dose after accounting for particle size and composition. Silver was detected by ICP-MS in re-suspended supernates of the isolated cell layer suggested that not all the silver deposited to the cell layer was absorbed by the cells. Both the VCM-ISDD and DG models estimated the proportion of Ag deposited to the cellular layer, which in both cases was greater than the amount of silver in the cells measured by ICP-MS. Modeled deposition more closely compared to the total Ag deposition by ICP-MS, i.e. mass of silver in the cells plus the resuspended, unabsorbed Ag from the cell layer. ICP-MS indicated the mass of silver in cells from AgNP treatment, but not whether the Ag was in the form of particles or dissolved ions. Deposition models predicted the amount of AgNP deposited to the cell layer, but not cellular uptake. Flow cytometry SSC was correlated to cellular uptake of particle-form AgNP and could be calibrated against ICP-MS to indicate mass of cellular uptake. Therefore, a combination of approaches may be required to accurately understand cellular dosimetry of in vitro nanotoxicology experiments. In summary, cellular dosimetry is an important consideration for nanotoxicology experiments, and not necessarily related to the applied dose.

Advancing Environmental Epidemiology to Assess the Beneficial Influence of the Natural Environment on Human Health and Well-Being.

Environmental health research can be oriented across a continuum of effects ranging from adverse to cobenefits to salutogenic. We argue that the salutogenic end of the continuum is insufficiently represented in research and as a basis for environmental protection, even though there is growing evidence that the natural environment plays a critical role in blunting adverse effects and promoting human health and well-being. Thus, we advocate for advancing environmental health research through environmental epidemiology that more fully and directly accounts for the salutogenic effects of the natural environment on individual well-being by (1) defining "natural environments" broadly, from pristine natural areas to urban green infrastructure; (2) considering exposure comprehensively to encompass residential, occupational, and recreational settings, local and distant, day-to-day and occasional; (3) doing individual-level assessments that include both health and well-being outcomes and one's experience of nature, including potential mediation by connectedness to nature and individual perceptions and preferences, as well as sociocultural and demographic effect modifiers; and (4) collecting longitudinal and nationally representative data.

Characterization of engineered nanoparticles in commercially available spray disinfectant products advertised to contain colloidal silver.

Given the potential for human exposure to silver nanoparticles from spray disinfectants and dietary supplements, we characterized the silver-containing nanoparticles in 22 commercial products that advertised the use of silver or colloidal silver as the active ingredient. Characterization parameters included: total silver, fractionated silver (particulate and dissolved), primary particle size distribution, hydrodynamic diameter, particle number, and plasmon resonance absorbance. A high degree of variability between claimed and measured values for total silver was observed. Only 7 of the products showed total silver concentrations within 20% of their nominally reported values. In addition, significant variations in the relative percentages of particulate vs. soluble silver were also measured in many of these products reporting to be colloidal. Primary silver particle size distributions by transmission electron microscopy (TEM) showed two populations of particles - smaller particles (<5nm) and larger particles between 20 and 40nm. Hydrodynamic diameter measurements using nanoparticle tracking analysis (NTA) correlated well with TEM analysis for the larger particles. Z-average (Z-Avg) values measured using dynamic light scattering (DLS); however, were typically larger than both NTA or TEM particle diameters. Plasmon resonance absorbance signatures (peak absorbance at around 400nm indicative of metallic silver nanoparticles) were only noted in 4 of the 9 yellow-brown colored suspensions. Although the total silver concentrations were variable among products, ranging from 0.54mg/L to 960mg/L, silver containing nanoparticles were identified in all of the product suspensions by TEM.

Treatment changes of hypo- and hyperdivergent Class II Herbst patients.

OBJECTIVES: To determine the relative effects of Herbst appliance therapy in hypo- and hyperdivergent patients. MATERIALS AND METHODS: The treated group included 45 growing Class II, division 1, patients treated with stainless steel crown Herbst appliances, followed by fixed edgewise appliances. The untreated control group consisted of 45 Class II, division 1, subjects, matched to the treated sample based on Angle classification, age, sex, and pretreatment mandibular plane angle (MPA). Subjects were categorized as hypo- or hyperdivergent based on their MPAs. Pre- and posttreatment cephalograms were traced and superimposed on cranial base and mandibular structures. RESULTS: The primary effect of the Herbst in terms of maxillomandibular correction was in the maxilla. It significantly restricted maxillary growth, producing a "headgear effect." Mandibular treatment changes depended on divergence. Hyperdivergent patients experienced a deleterious backward true mandibular rotation with Herbst treatment. Hypodivergent patients, as well as untreated hypo- and hyperdivergent controls, underwent forward true mandibular rotation. However, hypodivergent chins did not advance any more than expected for untreated hypodivergent Class II patients. CONCLUSIONS: Hypo- and hyperdivergent patients benefit from the Herbst's headgear effect. While the mandibular growth of hypodivergent patients overcomes the negative rotational effects, hyperdivergent patients undergo a deleterious backward mandibular rotation and increases in facial height.

A comprehensive framework for evaluating the environmental health and safety implications of engineered nanomaterials.

Engineered nanomaterials (ENM) are a growing aspect of the global economy, and their safe and sustainable development, use, and eventual disposal requires the capability to forecast and avoid potential problems. This review provides a framework to evaluate the health and safety implications of ENM releases into the environment, including purposeful releases such as for antimicrobial sprays or nano-enabled pesticides, and inadvertent releases as a consequence of other intended applications. Considerations encompass product life cycles, environmental media, exposed populations, and possible adverse outcomes. This framework is presented as a series of compartmental flow diagrams that serve as a basis to help derive future quantitative predictive models, guide research, and support development of tools for making risk-based decisions. After use, ENM are not expected to remain in their original form due to reactivity and/or propensity for hetero-agglomeration in environmental media. Therefore, emphasis is placed on characterizing ENM as they occur in environmental or biological matrices. In addition, predicting the activity of ENM in the environment is difficult due to the multiple dynamic interactions between the physical/chemical aspects of ENM and similarly complex environmental conditions. Others have proposed the use of simple predictive functional assays as an intermediate step to address the challenge of using physical/chemical properties to predict environmental fate and behavior of ENM. The nodes and interactions of the framework presented here reflect phase transitions that could be targets for development of such assays to estimate kinetic reaction rates and simplify model predictions. Application, refinement, and demonstration of this framework, along with an associated knowledgebase that includes targeted functional assay data, will allow better de novo predictions of potential exposures and adverse outcomes.

In vitro bioaccessibility of copper azole following simulated dermal transfer from pressure-treated wood.

Micronized copper azole (MCA) and micronized copper quaternary (MCQ) are the latest wood preservatives to replace the liquid alkaline copper and chromated copper arsenate preservatives due to concerns over the toxicity or lack of effectiveness of the earlier formulations. Today, the use of MCA has become abundant in the wood preservative industry with approximately 38millionlbs of copper carbonate being used to treat lumber each year. Despite this widespread usage, little information is available on the bioaccessibility of this preservative upon gastrointestinal exposure. Using a simulated hand-to-mouth/gastric system exposure study we investigated several types of commercially available copper-treated lumber products as-purchased and after exposure to outdoor weathering conditions. Soluble and particulate fractions of copper were measured after transfer to and release from surface wipes passed along copper-treated lumber and exposed to synthetic stomach fluid (SSF, pH1.5) or deionized (DI) water. Wipes passed along new boards contained greater amounts of copper than wipes from weathered boards. The total copper recovered from the wipes after microwave extraction varied among the different wood types. For all wood types the copper released into SSF was more soluble than what was soluble in DI water. The data suggest that copper from treated wood is highly bioaccessible in SSF regardless of wood type and weathering condition.

Estimating dermal transfer of copper particles from the surfaces of pressure-treated lumber and implications for exposure.

Lumber pressure-treated with micronized copper was examined for the release of copper and copper micro/nanoparticles using a surface wipe method to simulate dermal transfer. In 2003, the wood industry began replacing CCA treated lumber products for residential use with copper based formulations. Micronized copper (nano to micron sized particles) has become the preferred treatment formulation. There is a lack of information on the release of copper, the fate of the particles during dermal contact, and the copper exposure level to children from hand-to-mouth transfer. For the current study, three treated lumber products, two micronized copper and one ionic copper, were purchased from commercial retailers. The boards were left to weather outdoors for approximately 1year. Over the year time period, hand wipe samples were collected periodically to determine copper transfer from the wood surfaces. The two micronized formulations and the ionic formulation released similar levels of total copper. The amount of copper released was high initially, but decreased to a constant level (~1.5mgm(-2)) after the first month of outdoor exposure. Copper particles were identified on the sampling cloths during the first two months of the experiment, after which the levels of copper were insufficient to collect interpretable data. After 1month, the particles exhibited minimal changes in shape and size. At the end of 2-months, significant deterioration of the particles was evident. Based on the wipe sample data, a playground visit may result in a potential exposure to 2.58mg of copper, which is near or exceeds the daily tolerable upper intake limits for children under the age of 8, if completely ingested through hand-to-mouth transfer. While nanoparticles were found, there is not enough information to estimate the exposure from the released particles due to a lack of published literature on copper carbonate.

Therapeutic Yoga: Symptom Management for Multiple Sclerosis.

Multiple sclerosis (MS) is the most common autoimmune inflammatory demyelinating disease of the central nervous system, affecting over 2.3 million people worldwide. According to the National Institute of Neurological Disorders and Stroke, the age of disease onset is typically between 20 and 40 years, with a higher incidence in women. Individuals with MS experience a wide range of symptoms, including declining physical, emotional, and psychological symptoms (e.g., fatigue, imbalance, spasticity, chronic pain, cognitive impairment, bladder and bowel dysfunction, visual and speech impairments, depression, sensory disturbance, and mobility impairment). To date, both the cause of and cure for MS remain unknown. In recent years, more individuals with MS have been pursuing alternative methods of treatment to manage symptoms of the disease, including mind-body therapies such as yoga, meditation, breathing, and relaxation techniques. It has been suggested that the practice of yoga may be a safe and effective way of managing symptoms of MS. Therefore, the purpose of this paper is to summarize the most relevant literature on exercise and mind-body modalities to treat MS symptoms and, more specifically, the benefits and potential role of yoga as an alternative treatment of symptom management for individuals with MS. The article also discusses future directions for research.

Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children's potential exposures.

Due to their antifungal, antibacterial, antiviral, and antimicrobial properties, silver nanoparticles (AgNPs) are used in consumer products intended for use by children or in the home. Children may be especially affected by the normal use of consumer products because of their physiological functions, developmental stage, and activities and behaviors. Despite much research to date, children's potential exposures to AgNPs are not well characterized. Our objectives were to characterize selected consumer products containing AgNPs and to use the data to estimate a child's potential non-dietary ingestion exposure. We identified and cataloged 165 consumer products claiming to contain AgNPs that may be used by or near children or found in the home. Nineteen products (textile, liquid, plastic) were selected for further analysis. We developed a tiered analytical approach to determine silver content, form (particulate or ionic), size, morphology, agglomeration state, and composition. Silver was detected in all products except one sippy cup body. Among products in a given category, silver mass contributions were highly variable and not always uniformly distributed within products, highlighting the need to sample multiple areas of a product. Electron microscopy confirmed the presence of AgNPs. Using this data, a child's potential non-dietary ingestion exposure to AgNPs when drinking milk formula from a sippy cup is 1.53 µg Ag/kg. Additional research is needed to understand the number and types of consumer products containing silver and the concentrations of silver in these products in order to more accurately predict children's potential aggregate and cumulative exposures to AgNPs.