How Climate Literacy and Public Opinion Are the Driving Forces Behind Climate-Based Policy: A Student Perspective on COP27.

Despite the existence of a substantial amount of climate-related scientific data, misconceptions about climate change are still prevalent within public opinion. Dissemination of misinformation to the public through subjective media sources is a major challenge that climate scientists face. Implementation of climate policy is crucial for mitigation and adaptation measures required to curtail anthropogenic rooted climate change. This paper will discuss student perspectives on the 2022 United Nations climate summit in Egypt (COP27) related to climate literacy and public opinion as the driving forces behind the enactment and execution of important climate-based policy.

Inorganic Scaling in Membrane Desalination: Models, Mechanisms, and Characterization Methods.

Inorganic scaling caused by precipitation of sparingly soluble salts at supersaturation is a common but critical issue, limiting the efficiency of membrane-based desalination and brine management technologies as well as other engineered systems. A wide range of minerals including calcium carbonate, calcium sulfate, and silica precipitate during membrane-based desalination, limiting water recovery and reducing process efficiency. The economic impact of scaling on desalination processes requires understanding of its sources, causes, effects, and control methods. In this Critical Review, we first describe nucleation mechanisms and crystal growth theories, which are fundamental to understanding inorganic scale formation during membrane desalination. We, then, discuss the key mechanisms and factors that govern membrane scaling, including membrane properties, such as surface roughness, charge, and functionality, as well as feedwater characteristics, such as pH, temperature, and ionic strength. We follow with a critical review of current characterization techniques for both homogeneous and heterogeneous nucleation, focusing on the strengths and limitations of each technique to elucidate scale-inducing mechanisms, observe actual crystal growth, and analyze the outcome of scaling behaviors of desalination membranes. We conclude with an outlook on research needs and future research directions to provide guidelines for scale mitigation in water treatment and desalination.

Distinct impacts of natural organic matter and colloidal particles on gypsum crystallization.

Gypsum scaling via crystallization is a major obstacle limiting the applications of membrane-based technologies and heat exchangers in engineered systems. Herein, we perform the first comparative investigation on the impacts of natural organic matter (Suwannee River humic acid, SRHA) and colloidal particles on the gypsum crystallization process in terms of induction time and crystal morphology. Results show that the presence of SRHA significantly increases the induction time of gypsum crystallization. Specifically, at a solution saturation index of 4.92, the induction time increases 6.5-fold in the presence of 6 mg/L SRHA, compared to the case without SRHA. SRHA also alters the morphology of the formed calcium sulfate crystals, resulting in a polygon-like shape, differing from the characteristic needle-like shape of gypsum in the absence of additives. These changes in crystal morphology are attributed to the adsorption of SRHA on the gypsum crystal surface, blocking the active sites for gypsum growth. In contrast, in the presence of colloidal particles, the observed induction time of gypsum crystallization either decreases or increases, depending on the competitive interplay between the enhancement effect in the nucleation step and the inhibition effect in the subsequent crystal growth step. Furthermore, the formed gypsum crystals in the presence of colloidal particles exhibit a needle-like morphology similar to the crystals formed in the absence of any additives. Our study provides fundamental understanding of gypsum crystallization in feedwaters containing natural organic matter and colloidal particles, highlighting the importance of feedwater composition in gypsum scaling.

Engineered Slippery Surface to Mitigate Gypsum Scaling in Membrane Distillation for Treatment of Hypersaline Industrial Wastewaters.

Membrane distillation (MD) is an emerging thermal desalination process, which can potentially treat high salinity industrial wastewaters, such as shale gas produced water and power plant blowdown. The performance of MD systems is hampered by inorganic scaling, particularly when treating hypersaline industrial wastewaters with high-scaling potential. In this study, we developed a scaling-resistant MD membrane with an engineered "slippery" surface for desalination of high-salinity industrial wastewaters at high water recovery. A polyvinylidene fluoride (PVDF) membrane was grafted with silica nanoparticles, followed by coating with fluoroalkylsilane to lower the membrane surface energy. Contact angle measurements revealed the "slippery" nature of the modified PVDF membrane. We evaluated the desalination performance of the surface-engineered PVDF membrane in direct contact membrane distillation using a synthetic wastewater with high gypsum scaling potential as well as a brine from a power plant blowdown. Results show that gypsum scaling is substantially delayed on the developed slippery surface. Compared to the pristine PVDF membrane, the modified PVDF membranes exhibited a stable MD performance with reduced scaling potential, demonstrating its potential to achieve high water recovery in treatment of high-salinity industrial wastewaters. We conclude with a discussion of the mechanism for gypsum scaling inhibition by the engineered slippery surface.

Frequency-dependent stability of CNT Joule heaters in ionizable media and desalination processes.

Water shortages and brine waste management are increasing challenges for coastal and inland regions, with high-salinity brines presenting a particularly challenging problem. These high-salinity waters require the use of thermally driven treatment processes, such as membrane distillation, which suffer from high complexity and cost. Here, we demonstrate how controlling the frequency of an applied alternating current at high potentials (20 Vpp) to a porous thin-film carbon nanotube (CNT)/polymer composite Joule heating element can prevent CNT degradation in ionizable environments such as high-salinity brines. By operating at sufficiently high frequencies, these porous thin-films can be directly immersed in highly ionizable environments and used as flow-through heating elements. We demonstrate that porous CNT/polymer composites can be used as self-heating membranes to directly heat high-salinity brines at the water/vapour interface of the membrane distillation element, achieving high single-pass recoveries that approach 100%, far exceeding standard membrane distillation recovery limits.

Coupling Underwater Superoleophobic Membranes with Magnetic Pickering Emulsions for Fouling-Free Separation of Crude Oil/Water Mixtures: An Experimental and Theoretical Study.

Oil/water separations have become an area of great interest, as growing oil extraction activities are increasing the generation of oily wastewaters as well as increasing the risk of oil spills. Here, we demonstrate a membrane-based and fouling-free oil/water separation method that couples carbon nanotube-poly(vinyl alcohol) underwater superoleophobic ultrafiltration membranes with magnetic Pickering emulsions. We demonstrate that this process is insensitive to low water temperatures, high ionic strength, or crude oil loading, while allowing operation at high permeate fluxes and producing high quality permeate. Furthermore, we develop a theoretical framework that analyzes the stability of Pickering emulsions under filtration mechanics, relating membrane surface properties and hydrodynamic conditions in the Pickering emulsion cake layer to membrane performance. Finally, we demonstrate the recovery and recyclability of the nanomagnetite used to form the Pickering emulsions through a magnetic separation step, resulting in an environmentally friendly, continuous process for oil/water separation.