Thermofluor-Based Optimization Strategy for the Stabilization of Recombinant Human Soluble Catechol-O-Methyltransferase.

Catechol-O-methyltransferase (COMT) has been involved in a number of medical conditions including catechol-estrogen-induced cancers and a great range of cardiovascular and neurodegenerative diseases such as Parkinson's disease. Currently, Parkinson's disease treatment relies on a triple prophylaxis, involving dopamine replacement by levodopa, the use of aromatic L-amino acid decarboxylase inhibitors, and the use of COMT inhibitors. Typically, COMT is highly thermolabile, and its soluble isoform (SCOMT) loses biological activity within a short time span preventing further structural and functional trials. Herein, we characterized the thermal stability profile of lysate cells from Komagataella pastoris containing human recombinant SCOMT (hSCOMT) and enzyme-purified fractions (by Immobilized Metal Affinity Chromatography-IMAC) upon interaction with several buffers and additives by Thermal Shift Assay (TSA) and a biological activity assessment. Based on the obtained results, potential conditions able to increase the thermal stability of hSCOMT have been found through the analysis of melting temperature (Tm) variations. Moreover, the use of the ionic liquid 1-butyl-3-methylimidazolium chloride [C4mim]Cl (along with cysteine, trehalose, and glycerol) ensures complete protein solubilization as well as an increment in the protein Tm of approximately 10 °C. Thus, the developed formulation enhances hSCOMT stability with an increment in the percentage of activity recovery of 200% and 70% when the protein was stored at 4 °C and -80 °C, respectively, for 12 h. The formation of metanephrine over time confirmed that the enzyme showed twice the productivity in the presence of the additive. These outstanding achievements might pave the way for the development of future hSCOMT structural and biophysical studies, which are fundamental for the design of novel therapeutic molecules.

Advances in Membrane-Bound Catechol-O-Methyltransferase Stability Achieved Using a New Ionic Liquid-Based Storage Formulation.

Membrane-bound catechol-O-methyltransferase (MBCOMT), present in the brain and involved in the main pathway of the catechol neurotransmitter deactivation, is linked to several types of human dementia, which are relevant pharmacological targets for new potent and nontoxic inhibitors that have been developed, particularly for Parkinson's disease treatment. However, the inexistence of an MBCOMT 3D-structure presents a blockage in new drugs' design and clinical studies due to its instability. The enzyme has a clear tendency to lose its biological activity in a short period of time. To avoid the enzyme sequestering into a non-native state during the downstream processing, a multi-component buffer plays a major role, with the addition of additives such as cysteine, glycerol, and trehalose showing promising results towards minimizing hMBCOMT damage and enhancing its stability. In addition, ionic liquids, due to their virtually unlimited choices for cation/anion paring, are potential protein stabilizers for the process and storage buffers. Screening experiments were designed to evaluate the effect of distinct cation/anion ILs interaction in hMBCOMT enzymatic activity. The ionic liquids: choline glutamate [Ch][Glu], choline dihydrogen phosphate ([Ch][DHP]), choline chloride ([Ch]Cl), 1- dodecyl-3-methylimidazolium chloride ([C12mim]Cl), and 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) were supplemented to hMBCOMT lysates in a concentration from 5 to 500 mM. A major potential stabilizing effect was obtained using [Ch][DHP] (10 and 50 mM). From the DoE 146% of hMBCOMT activity recovery was obtained with [Ch][DHP] optimal conditions (7.5 mM) at -80 °C during 32.4 h. These results are of crucial importance for further drug development once the enzyme can be stabilized for longer periods of time.

Unveiling the biopathway for the design of novel COMT inhibitors.

Catechol-O-methyltransferase (COMT) is an enzyme responsible for the O-methylation of biologically active catechol-based molecules. It has been associated with several neurological disorders, especially Parkinson's disease (PD), because of its involvement in catecholamine metabolism, and has been considered an important therapeutic target for central nervous system disorders. In this review, we summarize the biophysical, structural, and therapeutical relevance of COMT; the medicinal chemistry behind the development of COMT inhibitors and the application of computer-aided design to support the design of novel molecules; current methodologies for the biosynthesis, isolation, and purification of COMT; and revise existing bioanalytical approaches for the assessment of enzymatic activity in several biological matrices.

Multitask ATPases (NBDs) of bacterial ABC importers type I and their interspecies exchangeability.

ATP-binding cassette (ABC) type I importers are widespread in bacteria and play a crucial role in its survival and pathogenesis. They share the same modular architecture comprising two intracellular nucleotide-binding domains (NBDs), two transmembrane domains (TMDs) and a substrate-binding protein. The NBDs bind and hydrolyze ATP, thereby generating conformational changes that are coupled to the TMDs and lead to substrate translocation. A group of multitask NBDs that are able to serve as the cellular motor for multiple sugar importers was recently discovered. To understand why some ABC importers share energy-coupling components, we used the MsmX ATPase from Bacillus subtilis as a model for biological and structural studies. Here we report the first examples of functional hybrid interspecies ABC type I importers in which the NBDs could be exchanged. Furthermore, the first crystal structure of an assigned multitask NBD provides a framework to understand the molecular basis of the broader specificity of interaction with the TMDs.

A contribution to the rational design of Ru(CO)3Cl2L complexes for in vivo delivery of CO.

A few ruthenium based metal carbonyl complexes, e.g. CORM-2 and CORM-3, have therapeutic activity attributed to their ability to deliver CO to biological targets. In this work, a series of related complexes with the formula [Ru(CO)3Cl2L] (L = DMSO (3), L-H3CSO(CH2)2CH(NH2)CO2H) (6a); D,L-H3CSO(CH2)2CH(NH2)CO2H (6b); 3-NC5H4(CH2)2SO3Na (7); 4-NC5H4(CH2)2SO3Na (8); PTA (9); DAPTA (10); H3CS(CH2)2CH(OH)CO2H (11); CNCMe2CO2Me (12); CNCMeEtCO2Me (13); CN(c-C3H4)CO2Et) (14)) were designed, synthesized and studied. The effects of L on their stability, CO release profile, cytotoxicity and anti-inflammatory properties are described. The stability in aqueous solution depends on the nature of L as shown using HPLC and LC-MS studies. The isocyanide derivatives are the least stable complexes, and the S-bound methionine oxide derivative is the more stable one. The complexes do not release CO gas to the headspace, but release CO2 instead. X-ray diffraction of crystals of the model protein Hen Egg White Lysozyme soaked with 6b (4UWN) and 8 (4UWN) shows the addition of Ru(II)(CO)(H2O)4 at the His15 binding site. Soakings with 7(4UWN) produced the metallacarboxylate [Ru(COOH)(CO)(H2O)3](+) bound to the His15 site. The aqueous chemistry of these complexes is governed by the water-gas shift reaction initiated with the nucleophilic attack of HO(-) on coordinated CO. DFT calculations show this addition to be essentially barrierless. The complexes have low cytotoxicity and low hemolytic indices. Following i.v. administration of CORM-3, the in vivo bio-distribution of CO differs from that obtained with CO inhalation or with heme oxygenase stimulation. A mechanism for CO transport and delivery from these complexes is proposed.

Aromatic aldehydes at the active site of aldehyde oxidoreductase from Desulfovibrio gigas: reactivity and molecular details of the enzyme-substrate and enzyme-product interaction.

Desulfovibrio gigas aldehyde oxidoreductase (DgAOR) is a mononuclear molybdenum-containing enzyme from the xanthine oxidase (XO) family, a group of enzymes capable of catalyzing the oxidative hydroxylation of aldehydes and heterocyclic compounds. The kinetic studies reported in this work showed that DgAOR catalyzes the oxidative hydroxylation of aromatic aldehydes, but not heterocyclic compounds. NMR spectroscopy studies using (13)C-labeled benzaldehyde confirmed that DgAOR catalyzes the conversion of aldehydes to the respective carboxylic acids. Steady-state kinetics in solution showed that high concentrations of the aromatic aldehydes produce substrate inhibition and in the case of 3-phenyl propionaldehyde a suicide substrate behavior. Hydroxyl-substituted aromatic aldehydes present none of these behaviors but the kinetic parameters are largely affected by the position of the OH group. High-resolution crystallographic structures obtained from single crystals of active-DgAOR soaked with benzaldehyde showed that the side chains of Phe425 and Tyr535 are important for the stabilization of the substrate in the active site. On the other hand, the X-ray data of DgAOR soaked with trans-cinnamaldehyde showed a cinnamic acid molecule in the substrate channel. The X-ray data of DgAOR soaked with 3-phenyl propionaldehyde showed clearly how high substrate concentrations inactivate the enzyme by binding covalently at the surface of the enzyme and blocking the substrate channel. The different reactivity of DgAOR versus aldehyde oxidase and XO towards aromatic aldehydes and N-heterocyclic compounds is explained on the basis of the present kinetic and structural data.

Interaction of vanadium(IV) with human serum apo-transferrin.

The interaction of V(IV)O-salts as well as of a few V(IV)O(carrier)n complexes with human serum transferrin (hTF) is studied focusing on the determination of the nature and stoichiometry of the binding of V(IV)O(2+) to hTF, as well as whether the conformation of hTF upon binding to V(IV)O(2+) or to its complexes is changed. Circular dichroism (CD) spectra measured for solutions containing V(IV)O(2+) and apo-hTF, and V(IV)O-maltol and apo-hTF, clearly indicate that hTF-V(IV)O-maltol ternary species form with a V(IV)O:maltol stoichiometry of 1:1. For V(IV)O salts and several V(IV)O(carrier)n complexes (carrier ligand=maltolato, dhp, picolinato and dipicolinato) (Hdhp=1,2-dimethyl-3-hydroxy-4-pyridinone) the maximum number of V(IV)O(2+) bound per mole of hTF is determined to be ~2 or lower in all cases. The binding of V(IV)O to apo-hTF most certainly involves several amino acid residues of the Fe-binding site, and as concluded by urea gel electrophoresis experiments, the formation of (V(IV)O)2hTF species may occur with the closing of the hTF conformation as is the case in (Fe(III))2hTF, which is an essential feature for the transferrin receptor recognition.

Solution structure, dynamics and binding studies of a family 11 carbohydrate-binding module from Clostridium thermocellum (CtCBM11).

Non-catalytic cellulosomal CBMs (carbohydrate-binding modules) are responsible for increasing the catalytic efficiency of cellulosic enzymes by selectively putting the substrate (a wide range of poly- and oligo-saccharides) and enzyme into close contact. In the present study we carried out an atomistic rationalization of the molecular determinants of ligand specificity for a family 11 CBM from thermophilic Clostridium thermocellum [CtCBM11 (C. thermocellum CBM11)], based on a NMR and molecular modelling approach. We have determined the NMR solution structure of CtCBM11 at 25°C and 50°C and derived information on the residues of the protein that are involved in ligand recognition and on the influence of the length of the saccharide chain on binding. We obtained models of the CtCBM11-cellohexaose and CtCBM11-cellotetraose complexes by docking in accordance with the NMR experimental data. Specific ligand-protein CH-π and Van der Waals interactions were found to be determinant for the stability of the complexes and for defining specificity. Using the order parameters derived from backbone dynamics analysis in the presence and absence of ligand and at 25°C and 50°C, we determined that the protein's backbone conformational entropy is slightly positive. This data in combination with the negative binding entropy calculated from ITC (isothermal titration calorimetry) studies supports a selection mechanism where a rigid protein selects a defined oligosaccharide conformation.

Characterization of a versatile organometallic pro-drug (CORM) for experimental CO based therapeutics.

The complex fac-[Mo(CO)(3)(histidinate)]Na has been reported to be an effective CO-Releasing Molecule in vivo, eliciting therapeutic effects in several animal models of disease. The CO releasing profile of this complex in different settings both in vitro and in vivo reveals that the compound can readily liberate all of its three CO equivalents under biological conditions. The compound has low toxicity and cytotoxicity and is not hemolytic. CO release is accompanied by a decrease in arterial blood pressure following administration in vivo. We studied its behavior in solution and upon the interaction with proteins. Reactive oxygen species (ROS) generation upon exposure to air and polyoxomolybdate formation in soaks with lysozyme crystals were observed as processes ensuing from the decomposition of the complex and the release of CO.

Kinetic and structural studies of aldehyde oxidoreductase from Desulfovibrio gigas reveal a dithiolene-based chemistry for enzyme activation and inhibition by H(2)O(2).

Mononuclear Mo-containing enzymes of the xanthine oxidase (XO) family catalyze the oxidative hydroxylation of aldehydes and heterocyclic compounds. The molybdenum active site shows a distorted square-pyramidal geometry in which two ligands, a hydroxyl/water molecule (the catalytic labile site) and a sulfido ligand, have been shown to be essential for catalysis. The XO family member aldehyde oxidoreductase from Desulfovibrio gigas (DgAOR) is an exception as presents in its catalytically competent form an equatorial oxo ligand instead of the sulfido ligand. Despite this structural difference, inactive samples of DgAOR can be activated upon incubation with dithionite plus sulfide, a procedure similar to that used for activation of desulfo-XO. The fact that DgAOR does not need a sulfido ligand for catalysis indicates that the process leading to the activation of inactive DgAOR samples is different to that of desulfo-XO. We now report a combined kinetic and X-ray crystallographic study to unveil the enzyme modification responsible for the inactivation and the chemistry that occurs at the Mo site when DgAOR is activated. In contrast to XO, which is activated by resulfuration of the Mo site, DgAOR activation/inactivation is governed by the oxidation state of the dithiolene moiety of the pyranopterin cofactor, which demonstrates the non-innocent behavior of the pyranopterin in enzyme activity. We also showed that DgAOR incubation with dithionite plus sulfide in the presence of dioxygen produces hydrogen peroxide not associated with the enzyme activation. The peroxide molecule coordinates to molybdenum in a η(2) fashion inhibiting the enzyme activity.

Escherichia coli expression, purification, crystallization, and structure determination of bacterial cohesin-dockerin complexes.

Cellulosomes are highly efficient nanomachines that play a fundamental role during the anaerobic deconstruction of complex plant cell wall carbohydrates. The assembly of these complex nanomachines results from the very tight binding of repetitive cohesin modules, located in a noncatalytic molecular scaffold, and dockerin domains located at the C-terminus of the enzyme components of the cellulosome. The number of enzymes found in a cellulosome varies but may reach more than 100 catalytic subunits if cellulosomes are further organized in polycellulosomes, through a second type of cohesin-dockerin interaction. Structural studies have revealed how the cohesin-dockerin interaction mediates cellulosome assembly and cell-surface attachment, while retaining the flexibility required to potentiate catalytic synergy within the complex. Methods that might be applied for the production, purification, and structure determination of cohesin-dockerin complexes are described here.

Purification, crystallization and preliminary X-ray characterization of the pentamodular arabinoxylanase CtXyl5A from Clostridium thermocellum.

The cellulosome, a highly elaborate extracellular multi-enzyme complex of cellulases and hemicellulases, is responsible for the degradation of plant cell walls. The xylanase CtXyl5A (Cthe_2193) is a multimodular arabinoxylanase which is one of the largest components of the Clostridium thermocellum cellulosome. The N-terminal catalytic domain of CtXyl5A, which is a member of glycoside hydrolase family 5 (GH5), is responsible for the hydrolysis of arabinoxylans. Appended after it are three noncatalytic carbohydrate-binding modules (CBMs), which belong to families 6 (CBM6), 13 (CBM13) and 62 (CBM62). In addition, CtXyl5A has a fibronectin type III-like (Fn3) module preceding the CBM62 and a type I dockerin (DOK) module following it which allows the enzyme to be integrated into the cellulosome through binding to a cohesin module of the protein scaffold CipA. Crystals of the pentamodular enzyme without the DOK module at the C-terminus, with the domain architecture CtGH5-CBM6-CBM13-Fn3-CBM62, have been obtained. The structure of this pentamodular xylanase has been determined by molecular replacement to a resolution of 2.64 Šusing coordinates of CtGH5-CBM6, Fn3 and CBM62 from the PDB as search models.

Overproduction, purification, crystallization and preliminary X-ray characterization of a novel carbohydrate-binding module of endoglucanase Cel5A from Eubacterium cellulosolvens.

The anaerobic cellulolytic rumen bacterium Eubacterium cellulosolvens produces a large array of cellulases and hemicellulases that are responsible for the hydrolysis of plant cell-wall polysaccharides. One of these enzymes, endoglucanase Cel5A, comprises two tandemly repeated novel carbohydrate-binding modules (CBMs) and two catalytic domains belonging to glycoside hydrolase family 5 joined by flexible linker sequences. The novel CBM located at the N-terminus of the endoglucanase has been crystallized. The crystals belonged to the hexagonal space group P6(1)22 and contained a single molecule in the asymmetric unit. The structure of the L-selenomethionine derivative has been solved by a MAD experiment on crystals that diffracted to 1.75 Šresolution.

Structural insights into a unique cellulase fold and mechanism of cellulose hydrolysis.

Clostridium thermocellum is a well-characterized cellulose-degrading microorganism. The genome sequence of C. thermocellum encodes a number of proteins that contain type I dockerin domains, which implies that they are components of the cellulose-degrading apparatus, but display no significant sequence similarity to known plant cell wall-degrading enzymes. Here, we report the biochemical properties and crystal structure of one of these proteins, designated CtCel124. The protein was shown to be an endo-acting cellulase that displays a single displacement mechanism and acts in synergy with Cel48S, the major cellulosomal exo-cellulase. The crystal structure of CtCel124 in complex with two cellotriose molecules, determined to 1.5 Å, displays a superhelical fold in which a constellation of α-helices encircle a central helix that houses the catalytic apparatus. The catalytic acid, Glu96, is located at the C-terminus of the central helix, but there is no candidate catalytic base. The substrate-binding cleft can be divided into two discrete topographical domains in which the bound cellotriose molecules display twisted and linear conformations, respectively, suggesting that the enzyme may target the interface between crystalline and disordered regions of cellulose.

CORM-3 reactivity toward proteins: the crystal structure of a Ru(II) dicarbonyl-lysozyme complex.

CORM-3, [fac-Ru(CO)(3)Cl(κ(2)-H(2)NCH(2)CO(2))], is a well-known carbon monoxide releasing molecule (CORM) capable of delivering CO in vivo. Herein we show for the first time that the interactions of CORM-3 with proteins result in the loss of a chloride ion, glycinate, and one CO ligand. The rapid formation of stable adducts between the protein and the remaining cis-Ru(II)(CO)(2) fragments was confirmed by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES), Liquid-Chromatography Mass Spectrometry (LC-MS), Infrared Spectroscopy (IR), and X-ray crystallography. Three Ru coordination sites are observed in the structure of hen egg white lysozyme crystals soaked with CORM-3. The site with highest Ru occupancy (80%) shows a fac-[(His15)Ru(CO)(2)(H(2)O)(3)] structure.

Putting an N-terminal end to the Clostridium thermocellum xylanase Xyn10B story: crystal structure of the CBM22-1-GH10 modules complexed with xylohexaose.

In general, plant cell wall degrading enzymes are modular proteins containing catalytic domains linked to one or more non-catalytic carbohydrate-binding modules (CBMs). Xyn10B from Clostridium thermocellum is a typical modular enzyme containing an N-terminal family 22 CBM (CBM22-1), a family 10 glycoside hydrolase catalytic domain (GH10), a second CBM22 (CBM22-2), a dockerin sequence and a C-terminal family 1 carbohydrate esterase (CE1) catalytic domain. The structure of the N-terminal bi-modular CBM22-1-GH10 component of Xyn10B has been determined using a SeMet derivative by SAD to 2.5Å. The data was extended to 2.0Å for the non-SeMet mutant complexed with xylohexaose. CBM22-1-GH10 is a 60kDa protein with an E337A mutation to render the GH10 subunit inactive. Three of the six xylose residues of xylohexaose are shown to be bound in the inactivated GH10 substrate binding cleft, with the other three sugars presumably disordered in the solvent channel. The protein is a dimer in the asymmetric unit with extensive surface contacts between the two GH10 modules and between the CBM22-1 and GH10 modules. Residues from helix H4 of the GH10 module provide the major contacts by fitting into the minor groove of the CBM22-1 module. The orientation of CBM22-1 is such that it would allow the substrate to be loosely bound and subsequently delivered to the active site in a processive manner.

Family 42 carbohydrate-binding modules display multiple arabinoxylan-binding interfaces presenting different ligand affinities.

Enzymes that degrade plant cell wall polysaccharides display a modular architecture comprising a catalytic domain bound to one or more non-catalytic carbohydrate-binding modules (CBMs). CBMs display considerable variation in primary structure and are grouped into 59 sequence-based families organized in the Carbohydrate-Active enZYme (CAZy) database. Here we report the crystal structure of CtCBM42A together with the biochemical characterization of two other members of family 42 CBMs from Clostridium thermocellum. CtCBM42A, CtCBM42B and CtCBM42C bind specifically to the arabinose side-chains of arabinoxylans and arabinan, suggesting that various cellulosomal components are targeted to these regions of the plant cell wall. The structure of CtCBM42A displays a beta-trefoil fold, which comprises 3 sub-domains designated as alpha, beta and gamma. Each one of the three sub-domains presents a putative carbohydrate-binding pocket where an aspartate residue located in a central position dominates ligand recognition. Intriguingly, the gamma sub-domain of CtCBM42A is pivotal for arabinoxylan binding, while the concerted action of beta and gamma sub-domains of CtCBM42B and CtCBM42C is apparently required for ligand sequestration. Thus, this work reveals that the binding mechanism of CBM42 members is in contrast with that of homologous CBM13s where recognition of complex polysaccharides results from the cooperative action of three protein sub-domains presenting similar affinities.

The 1.4 A resolution structure of Paracoccus pantotrophus pseudoazurin.

Pseudoazurins are small type 1 copper proteins that are involved in the flow of electrons between various electron donors and acceptors in the bacterial periplasm, mostly under denitrifying conditions. The previously determined structure of Paracoccus pantotrophus pseudoazurin in the oxidized form was improved to a nominal resolution of 1.4 A, with R and R(free) values of 0.188 and 0.206, respectively. This high-resolution structure makes it possible to analyze the interactions between the monomers and the solvent structure in detail. Analysis of the high-resolution structure revealed the structural regions that are responsible for monomer-monomer recognition during dimer formation and for protein-protein interaction and that are important for partner recognition. The pseudoazurin structure was compared with other structures of various type 1 copper proteins and these were grouped into families according to similarities in their secondary structure; this may be useful in the annotation of copper proteins in newly sequenced genomes and in the identification of novel copper proteins.

Crystallization and crystallographic analysis of the apo form of the orange protein (ORP) from Desulfovibrio gigas.

The orange-coloured protein (ORP) from Desulfovibrio gigas is a 12 kDa protein that contains a novel mixed-metal sulfide cluster of the type [S(2)MoS(2)CuS(2)MoS(2)]. Diffracting crystals of the apo form of ORP have been obtained. Data have been collected for the apo form of ORP to 2.25 A resolution in-house and to beyond 2.0 A resolution at ESRF, Grenoble. The crystals belonged to a trigonal space group, with unit-cell parameters a = 43, b = 43, c = 106 A.