Finite size effects on the metamagnetic phase transition in a thick B2 FeRh nanocluster film.

FeRh alloys in the CsCl-type (B2) chemically ordered phase present an antiferromagnetic to ferromagnetic order transition around 370 K observed in bulk and continuous films but absent in nanoclusters. In this study, we investigate the thermal magnetic behavior of a thick film composed of assembled FeRh nanoclusters preformed in the gas phase. This work reveals a broad and asymmetric metamagnetic transition with a consequent residual magnetization at low temperature. Due to the coexistence of different grain sizes in the sample, we confront the results with a description that involves two populations of B2-FeRh particles, and the existence of a discriminating size below which the magnetic order transition does not take place.

SiN half-etch horizontal slot waveguides for integrated photonics: numerical modeling, fabrication, and characterization of passive components.

This work presents a "half-etch" horizontal slot waveguide design based on SiN, where only the upper SiN layer is etched to form a strip that confines the mode laterally. The numerical modeling, fabrication, and characterization of passive waveguiding components are described. This novel slot waveguide structure was designed with on-chip light amplification in mind, for example with an Er-doped oxide spacer layer. Proof-of-concept racetrack resonators were fabricated and characterized, showing quality factors up to 50,000 at critical coupling and residual losses of 4 dB/cm at wavelengths away from the N-H bond absorption peak in SiN, demonstrating the high potential of these horizontal slot waveguides for use in active integrated photonics.

Low-voltage, broadband graphene-coated Bragg mirror electro-optic modulator at telecom wavelengths.

We demonstrate a graphene based electro-optic free-space modulator yielding a reflectance contrast of 20% over a strikingly large 250nm wavelength range, centered in the near-infrared telecom band. Our device is based on the original association of a planar Bragg reflector, topped with an electrically contacted double-layer graphene capacitor structure employing a high work-function oxide shown to confer a static doping to the graphene in the absence of an external bias, thereby reducing the switching voltage range to +/-1V. The device design, fabrication and opto-electric characterization is presented, and its behavior modeled using a coupled optical-electronic framework.

Modeling the anisotropic electro-optic interaction in hybrid silicon-ferroelectric optical modulator.

We present a numerical method to accurately model the electro-optic interaction in anisotropic materials. Specifically, we combine a full-vectorial finite-difference optical mode solver with a radio-frequency solver to analyze the overlap between optical modes and applied electric field. This technique enables a comprehensive understanding on how electro-optic effects modify individual elements in the permittivity tensor of a material. We demonstrate the interest of this approach by designing a modulator that leverages the Pockels effect in a hybrid silicon-BaTiO3 slot waveguide. Optimized optical confinement in the active BaTiO3 layer as well as design of travelling-wave index-matched electrodes is presented. Most importantly, we show that the overall electro-optic modulation is largely governed by off-diagonal elements in the permittivity tensor. As most of active electro-optic materials are anisotropic, this method paves the way to better understand the physics of electro-optic effects and to improve optical modulators.