A simple spectroscopic method to determine dimethoate in water samples by complex formation.

A simple and rapid method for the determination of dimethoate in water was developed based on the monitoring of the complex formation between bis 5-phenyldipyrrinate of nickel (II) and the herbicide dimethoate. The method showed a short response time (10 s), high selectivity (very low interference from other sulfate and salts), high sensitivity (limit of detection (LOD) 0.45 µM, limit of quantitation (LOQ) of 1.39 µM), and a Kd of 2.4 µM. Stoichiometry experiments showed that complex formation occurred with a 1:1 relation. The method was applied to different environmental water samples such as lagoon, stream, urban, and groundwater samples. The results indicated that independently from the water source, the method exhibited high precision (0.25-2.47% variation coefficient) and accuracy (84.42-115.68% recovery). In addition, the method was also tested using an effluent from a wastewater treatment plant from Mexico; however, the results indicated that the presence of organic matter had a pronounced effect on the detection.

Glyphosate Determination by Coupling an Immuno-Magnetic Assay with Electrochemical Sensors.

Glyphosate (N-(phosphonomethyl)glycine) is the most frequently used broad-spectrum herbicide worldwide. Its mechanism of action is based on the inhibition of an enzyme that is essential to plant growth. Its intensive use has caused global contamination to occur, which has not only affected the ecosystems, but even food and other objects of common use. Thus, there is a pronounced need for developing analytical methods for glyphosate determination in different matrices. Here, an electrochemical competitive immunoassay, based on the use of antibody-modified magnetic particles, has been developed. Tetramethylbenzidine (TMB) has been used as an enzymatic substrate. The extent of the affinity reaction has been achieved by monitoring the current value, due to the reduction of the enzymatic product. A disposable screen-printed electrochemical cell has been used. The calibration curve has been recorded in the 0⁻10,000 ng/L concentration range, with a detection limit of 5 ng/L and quantification limit of 30 ng/L. The electrochemical immunoassay has also been applied to the analysis of spiked beer samples.