Cationic lipid nanoparticle production by microfluidization for siRNA delivery.

Microfluidization has been investigated as a new, scalable, and basic component saving method to produce cationic lipid nanoparticles, in particular for the delivery of short interfering RNAs (siRNAs). The design of experiment (DoE) allowed to reach optimized characteristics in terms of nanocarrier size reduction and low polydispersity. The structure of cationic liposomes and siRNA-lipoplexes was characterized. The optimized preparation parameters were identified as three microfluidization passages at a pressure of 10,000 psi, with a thin film hydration volume of 4 ml. Microfluidized liposomes mean size was 160 nm, with a polydispersity index of 0.2-0.3 and a zeta potential of +40 mV to +60 mV. Positive versus negative charge ratio between the charges of the cationic lipid and the phosphate charges of the siRNAs is a key factor determining the structure and silencing efficacy of siRNA lipoplexes. At a (+/-) charge ratio of 8, a proportion of 88% of the siRNA was associated to microfluidized lipoplexes, which remained stable for one month. These lipoplexes exhibited moderate cytotoxicity and gene silencing efficacy, which should be further optimized.

Antioxidant Activity and Toxicity Study of Cerium Oxide Nanoparticles Stabilized with Innovative Functional Copolymers.

Oxidative stress, which is one of the main harmful mechanisms of pathologies including ischemic stroke, contributes to both neurons and endothelial cell damages, leading to vascular lesions. Although many antioxidants are tested in preclinical studies, no treatment is currently available for stroke patients. Since cerium oxide nanoparticles (CNPs) exhibit remarkable antioxidant capacities, the objective is to develop an innovative coating to enhance CNPs biocompatibility without disrupting their antioxidant capacities or enhance their toxicity. This study reports the synthesis and characterization of functional polymers and their impact on the enzyme-like catalytic activity of CNPs. To study the toxicity and the antioxidant properties of CNPs for stroke and particularly endothelial damages, in vitro studies are conducted on a cerebral endothelial cell line (bEnd.3). Despite their internalization in bEnd.3 cells, coated CNPs are devoid of cytotoxicity. Microscopy studies report an intracellular localization of CNPs, more precisely in endosomes. All CNPs reduces glutamate-induced intracellular production of reactive oxygen species (ROS) in endothelial cells but one CNP significantly reduces both the production of mitochondrial superoxide anion and DNA oxidation. In vivo studies report a lack of toxicity in mice. This study therefore describes and identifies biocompatible CNPs with interesting antioxidant properties for ischemic stroke and related pathologies.

Comprehensive and quantitative stability study of ascorbic acid using capillary zone electrophoresis with ultraviolet detection and high-resolution tandem mass spectrometry.

Ascorbic acid is a powerful antioxidant compound involved in many biological functions, and a chronic deficiency is at the origin of scurvy disease. A simple, rapid, and cost-effective capillary electrophoresis method was developed for the separation and simultaneous quantification of ascorbic acid and the major degradation products: dehydroascorbic acid, furfural, and furoic acid. Systematic optimization of the conditions was performed that enabled baseline separation of the compounds in less than 10 min. In addition to simultaneous quantification of ascorbic acid alongside to the degradation products, stability studies demonstrated the possibility using capillary electrophoresis to separate and identify the major degradation products. Thus, high-resolution tandem mass spectrometry experiments were conducted in order to identify an unknown degradation product separated by capillary electrophoresis and significantly present in degraded samples. Comparison of mass spectrometry data and capillary electrophoresis electropherograms allowed to identify unambiguously trihydroxy-keto-valeraldehyde. Finally, capillary electrophoresis was successfully applied to evaluate the composition of different pharmaceutical preparation of ascorbic acid. Results showed the excellent performance of the capillary electrophoresis method due to the separation of excipients from the compounds of interest, which demonstrated the relevance of using an electrophoretic separation in order to perform comprehensive stability studies of ascorbic acid.

Qualitative and quantitative analysis of the uptake of lipoplexes by villous placenta explants.

Controlled distribution of a drug by its association to a nanocarrier is a promising approach for the treatment of pregnancy disorders such as preeclampsia. For this application, tracking both the nanocarrier and the drug is necessary to ensure the safety of both the mother and the foetus. This study reports a method to visualize and quantify the uptake of liposomal formulations in placental tissue using florescent labelling and appropriate analytical tools. Lipoplexes were labelled with a fluorescent lipid, DOPE-NBD while the encapsulated siRNA was fluorescently labelled with rhodamine. Lipoplexes were incubated with villous placenta explants, explants were imaged with confocal microscopy, then DOPE-NBD was extracted from the explant and quantified by HPLC. Qualitative evaluation by confocal microscopy showed the presence of lipoplexes and siRNA into the outer layer of the placental explants, the syncytiotrophoblast. For quantitative evaluation, an HPLC method for the quantification of fluorescent lipid DOPE-NBD in placental tissue was developed and validated. The developed method was applied to quantify the DOPE-NBD uptake in the placental tissue. Increased amounts of DOPE-NBD were detected in placental explants when increasing the incubation concentration of lipoplexes. This study provides a method to evaluate the interactions between liposomal formulation and the placental barrier.

In vitro and in vivo evaluation of a dextran-graft-polybutylmethacrylate copolymer coated on CoCr metallic stent.

Introduction: The major complications of stent implantation are restenosis and late stent thrombosis. PBMA polymers are used for stent coating because of their mechanical properties. We previously synthesized and characterized Dextrangraft-polybutylmethacrylate copolymer (Dex-PBMA) as a potential stent coating. In this study, we evaluated the haemocompatibility and biocompatibility properties of Dex-PBMA in vitro and in vivo. Methods: Here, we investigated: (1) the effectiveness of polymer coating under physiological conditions and its ability to release Tacrolimus®, (2) the capacity of Dex-PBMA to inhibit Staphylococcus aureus adhesion, (3) the thrombin generation and the human platelet adhesion in static and dynamic conditions, (4) the biocompatibility properties in vitro on human endothelial colony forming cells ( ECFC) and on mesenchymal stem cells (MSC) and in vivo in rat models, and (5) we implanted Dex-PBMA and Dex-PBMATAC coated stents in neointimal hyperplasia restenosis rabbit model. Results: Dex-PBMA coating efficiently prevented bacterial adhesion and release Tacrolimus®. Dex-PBMA exhibit haemocompatibility properties under flow and ECFC and MSC compatibility. In vivo, no pathological foreign body reaction was observed neither after intramuscular nor intravascular aortic implantation. After Dex-PBMA and Dex-PBMATAC coated stents 30 days implantation in a restenosis rabbit model, an endothelial cell coverage was observed and the lumen patency was preserved. Conclusion: Based on our findings, Dex-PBMA exhibited vascular compatibility and can potentially be used as a coating for metallic coronary stents.

Liposomes as Gene Delivery Vectors for Human Placental Cells.

Nanomedicine as a therapeutic approach for pregnancy-related diseases could offer improved treatments for the mother while avoiding side effects for the fetus. In this study, we evaluated the potential of liposomes as carriers for small interfering RNAs to placental cells. Three neutral formulations carrying rhodamine-labelled siRNAs were evaluated on an in vitro model, i.e., human primary villous cytotrophoblasts. siRNA internalization rate from lipoplexes were compared to the one in the presence of the lipofectamine reagent and assessed by confocal microscopy. Results showed cellular internalization of nucleic acid with all three formulations, based on two cationic lipids, either DMAPAP or CSL-3. Moreover, incubation with DMAPAP+AA provided a rate of labelled cells as high as with lipofectamine (53 ± 15% and 44 ± 12%, respectively) while being more biocompatible. The proportion of cells which internalized siRNA were similar when using DMAPAP/DDSTU (16 ± 5%) and CSL-3 (22 ± 5%). This work highlights that liposomes could be a promising approach for gene therapy dedicated to pregnant patients.

Assessment of dually labelled PEGylated liposomes transplacental passage and placental penetration using a combination of two ex-vivo human models: the dually perfused placenta and the suspended villous explants.

Uptake and passage of nanocarriers through the placenta are critical information to develop new therapeutic approaches during pregnancy. In order to assess nanocarriers transplacental passage and penetration into the placenta, we studied and optimized two ex-vivo human models: the dually perfused placenta and the placenta explants. Doubly labelled PEGylated liposomes were used as models to provide data on the penetration and transplacental passage of drugs and liposomes. A HPLC method was set-up to quantify both carboxyfluorescein and lipid-rhodamine. Transplacental passage was then quantified using HPLC and placental penetration was assessed using spinning disk microscopy. We found a similar transplacental passage rate for both free and encapsulated carboxyfluorescein as well as a homogeneous fluorescence intensity in the outer cell layer of the placental villous, the syncytiotrophoblast, and the mesenchyma. Besides, liposome-rhodamine was not detected in the fetal circulation. The absence of transplacental passage of PEGylated liposomes is also supported by their detection in the sole syncytiotrophoblast. The combination of two ex-vivo models and the monitoring of both the drug and the carrier provided consistent and complementary information. Overall, we suggest combining the perfused human placenta and the human explants villous models to evaluate nanocarriers designed for treatments during pregnancy.

Bioreactivity of stent material: Activation of platelets, coagulation, leukocytes and endothelial cell dysfunction in vitro.

Outcome of patients with coronary artery disease has been significantly improved by percutaneous coronary interventions with stent implantation. However, despite progress made on devices and antithrombotic treatments, stent thrombosis remains an important issue because of serious adverse consequences. Several mechanisms are assumed to favor stent thrombosis as platelet aggregation, fibrin formation, defective healing and local inflammation. The objective of this study was to evaluate in vitro the thrombogenicity, proinflammatory properties and healing capacities of cobalt-chromium (CoCr), an alloy commonly used for cardiovascular implants. Platelet adhesion was quantified in static and flow conditions. Thrombin generation was performed using the calibrated automated thrombogram. Neutrophil adhesion and formation of extracellular traps were visualized by scanning electron microscopy and by immunofluorescence. The phenotype of endothelial cells grown on CoCr was analyzed using specific antibodies, whereas the procoagulant potential was analyzed by measuring thrombin generation and protein C activation. Our results show that human blood platelets adhere to and are activated on CoCr in static and flow conditions. Overall, CoCr significantly induced thrombin generation in the presence or absence of platelets by 1.5- and 4.8-fold, respectively, involving activation of the contact pathway and activation of platelets. CoCr triggered leukocyte adhesion and behaved as a scaffold for the formation of neutrophil extracellular traps in the presence of platelets. Endothelial cells adhered and formed a monolayer covering CoCr. However, they switched from an anticoagulant phenotype to a procoagulant one with a significant 2.2-fold increase in thrombin generation due to a combined 30% reduced capacity to trigger protein C activation and 30% increased expression of tissue factor. Moreover, endothelial cells grown on CoCr acquired an inflammatory phenotype as indicated by the increased expression of ICAM-1 and VCAM-1. These data show that bare CoCr is prothrombotic and proinflammatory due to its capacity to activate platelets and coagulation and to induce leukocyte adhesion and activation. More importantly, even if endothelialization is achievable, the switch in endothelial phenotype prevents effective healing. Furthermore, we propose our methodology for future preclinical in vitro evaluation of the thrombogenicity of stent materials.

Doubly amphiphilic poly(2-oxazoline)s as high-capacity delivery systems for hydrophobic drugs.

Solubilization of highly hydrophobic drugs with carriers that are non-toxic, non-immunogenic and well-defined remains a major obstacle in pharmaceutical sciences. Well-defined amphiphilic di- and triblock copolymers based on poly(2-oxazolines) were prepared and used for the solubilization of Paclitaxel (PTX) and other water-insoluble drugs. Probing the polymer micelles in water with the fluorescence probe pyrene, an unusual high polar microenvironment of the probe was observed. This coincides with an extraordinary large loading capacity for PTX of 45 wt.% active drug in the formulation as well as high water solubility of the resulting formulation. Physicochemical properties of the formulations, ease of preparation and stability upon lyophilization, low toxicity and immunogenicity suggest that poly(2-oxazoline)s are promising candidates for the delivery of highly challenging drugs. Furthermore, we demonstrate that PTX is fully active and provides superior tumor inhibition as compared to the commercial micellar formulation.

Parameters affecting organization and transfection efficiency of amphiphilic copolymers/DNA carriers.

Amphiphilic block copolymers are attracting increasing interest in the field of gene therapy, especially for transfection of striated muscles. However, little is known about the parameters affecting their transfection efficiency in vivo. These copolymers can self-assemble as micelles in certain conditions. Since micellization strongly depends on the temperature and ionic content of the preparation medium, the present paper aimed at investigating the influence of these parameters in the context of gene delivery. We first assessed the micellization of pluronic L64 and tetronic 304 at various temperatures in water, saline or Tyrode's salts solution. Pluronic L64 can form micelles at temperatures above 37 degrees C in water or at 37 degrees C in the Tyrode's salts solution, in the range of concentration investigated. For tetronic 304, CMC was found to be far below the concentrations used to transfer DNA. Pluronic L64 interacted with DNA only in the presence of micelles. Moreover, in vivo evaluation demonstrated that significantly improved transfection efficiency was obtained at 37 degrees C in Tyrode's salts solution for pluronic L64 based formulations, compared to 4 degrees C and 20 degrees C. Such differences were not recorded with tetronic 304. Finally, optimized formulations of both tetronic 304 and pluronic L64 were able to mediate efficient transfection in dystrophic muscles.

Comparison of toxicity and transfection efficiency of amphiphilic block copolymers and polycationic polymers in striated muscles.

BACKGROUND: Gene delivery using synthetic vectors is frequently based on cationic compounds such as polyethyleneimine (PEI). However, few data have been published on the ability of PEI to mediate transgene expression in muscle tissue. Besides cationic vectors, there is increasing interest focusing on amphiphilic copolymers as gene carriers into striated muscles, although their mechanism of action is unknown. METHODS: Plasmid DNA was associated with three different polymers: the cationic polyethyleneimine and two amphiphilic copolymers displaying few (tetronic 304) or no charges (pluronic L64). The resulting formulations were investigated by dynamic light scattering, laser doppler velocimetry, gel retardation assay and transmission electron microscopy. The toxicity and efficiency of the carriers were assessed in both skeletal and cardiac muscles. RESULTS: PEI efficiently condenses plasmids into small complexes displaying a positive electrophoretic mobility. However, these PEI/DNA complexes lead to severe side-effects in vivo. The association between amphiphilic copolymers and DNA leads to no or only partial condensation of plasmids. Moreover, amphiphilic polymers do not interact strongly with DNA and tetronic-based systems are destabilized with a decreasing pH. Those vectors also display a negative electrophoretic mobility. Thus, characteristics of amphiphilic polymer/DNA systems might be considered unfavourable for transfection. However, safe and rather efficient gene expression was obtained in skeletal muscles, even at low DNA doses, but not in the myocardium. CONCLUSIONS: The present study highlights the interest in amphiphilic carriers for promoting DNA transfection in vivo. Gaining new insights into the properties of these vectors should allow their optimization.

Hydrosoluble polymers for muscular gene delivery.

Striated muscle tissue is an attractive target for gene delivery as it can be easily reached and can express exogenous proteins. However, administration of naked DNA results in low transfection levels, and the design and development of safe and efficient gene delivery systems are thus required. This review is focusing on the characteristics of the striated muscle tissue with regards to features possibly affecting gene transfer, as well as the different soluble polymers that have been evaluated as gene carriers. The described formulations are ranging from polymers displaying a high density of positive charges to non-ionic molecules. Nevertheless, polymers exhibiting few or no positive charges appear to our opinion as the most promising approach to achieve both safe and efficient transfection of the striated muscles.