Cellulose-Encapsulated Composite Electrolyte Design: Toward Chemically and Mechanically Enhanced Solid-Sodium Batteries.

Sulfide- and halide-based ceramic ionic conductors exhibit comparable ionic conductivity with liquid electrolytes and are candidates for high-energy- and high-power-density all-solid-state batteries. These materials, however, are inherently brittle, making them unfavorable for applications. Here, we report a mechanically enhanced composite Na+ conductor that contains 92.5 wt % of sodium thioantimonate (Na3SbS4, NSS) and 7.5 wt % of sodium carboxymethyl cellulose (CMC); the latter serves as the binder and an electrochemically inert encapsulation layer. The ceramic and binder constituents were integrated at the particle level, providing ceramic NSS-level Na+ conductivity in the NSS-CMC composite. The more than 5-fold decrease of electrolyte thickness obtained in NSS-CMC composite provided a 5-fold increase in Na+ conductance compared to NSS ceramic pellets. As a result of the CMC encapsulation, this NSS-CMC composite shows increased moisture resistivity and electrochemical stability, which significantly promotes the cycling performance of NSS-based solid-state batteries. This work demonstrates a well-controlled, orthogonal process of ceramic-rich, composite electrolyte processing: independent streams for ceramic particle formation along with binder encapsulation in a solvent-assisted environment. This work also provides insights into the interplay among the solvent, the polymeric binder, and the ceramic particles in composite electrolyte synthesis and implies the critical importance of identifying the appropriate solvent/binder system for precise control of this complicated process.

Microfabrication Process Development for a Polymer-Based Lab-on-Chip Concept Applied in Attenuated Total Reflection Fourier Transform Infrared Spectroelectrochemistry.

Micro electro-mechanical systems (MEMS) combining sensing and microfluidics functionalities, as are common in Lab-on-Chip (LoC) devices, are increasingly based on polymers. Benefits of polymers include tunable material properties, the possibility of surface functionalization, compatibility with many micro and nano patterning techniques, and optical transparency. Often, additional materials, such as metals, ceramics, or silicon, are needed for functional or auxiliary purposes, e.g., as electrodes. Hybrid patterning and integration of material composites require an increasing range of fabrication approaches, which must often be newly developed or at least adapted and optimized. Here, a microfabrication process concept is developed that allows one to implement attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and electrochemistry on an LoC device. It is designed to spatially resolve chemical sensitivity and selectivity, which are instrumental for the detection of chemical distributions, e.g., during on-flow chemical and biological reaction chemistry. The processing sequence involves (i) direct-write and soft-contact UV lithography in SUEX dry resist and replication in polydimethylsiloxane (PDMS) elastomers as the fluidic structure; (ii) surface functionalization of PDMS with oxygen plasma, 3-aminopropyl-triethoxysilane (APTES), and a UV-curable glue (NOA 73) for bonding the fluidic structure to the substrate; (iii) double-sided patterning of silicon nitride-coated silicon wafers serving as the ATR-FTIR-active internal reflection element (IRE) on one side and the electrode-covered substrate for microfluidics on the back side with lift-off and sputter-based patterning of gold electrodes; and (iv) a custom-designed active vacuum positioning and alignment setup. Fluidic channels of 100 µm height and 600 µm width in 5 mm thick PDMS were fabricated on 2" and 4" demonstrators. Electrochemistry on-chip functionality was demonstrated by cyclic voltammetry (CV) of redox reactions involving iron cyanides in different oxidation states. Further, ATR-FTIR measurements of laminar co-flows of H2O and D2O demonstrated the chemical mapping capabilities of the modular fabrication concept of the LoC devices.

Chemical Imaging of Mass Transport Near the No-Slip Interface of a Microfluidic Device using Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy.

Mass transport in geometrically confined environments is fundamental to microfluidic applications. Measuring the distribution of chemical species on flow requires the use of spatially resolved analytical tools compatible with microfluidic materials and designs. Here, the implementation of an attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) imaging (macro-ATR) approach for chemical mapping of species in microfluidic devices is described. The imaging method is configurable between a large field of view, single-frame imaging, and the use of image stitching to build composite chemical maps. Macro-ATR is used to quantify transverse diffusion in the laminar streams of coflowing fluids in dedicated microfluidic test devices. It is demonstrated that the ATR evanescent wave, which primarily probes the fluid within ∼500 nm of the channel surface, provides accurate quantification of the spatial distribution of species in the entire microfluidic device cross section. This is the case when flow and channel conditions promote vertical concentration contours in the channel as verified by three-dimensional numeric simulations of mass transport. Furthermore, the validity of treating the mass transport problem in a simplified and faster approach using reduced dimensionality numeric simulations is described. Simplified one-dimensional simulations, for the specific parameters used herein, overestimate diffusion coefficients by a factor of approximately 2, whereas full three-dimensional simulations accurately agree with experimental results.

Biochemical Alterations in White Matter Tracts of the Aging Mouse Brain Revealed by FTIR Spectroscopy Imaging.

White matter degeneration in the central nervous system (CNS) has been correlated with a decline in cognitive function during aging. Ultrastructural examination of the aging human brain shows a loss of myelin, yet little is known about molecular and biochemical changes that lead to myelin degeneration. In this study, we investigate myelination across the lifespan in C57BL/6 mice using electron microscopy and Fourier transform infrared (FTIR) spectroscopic imaging to better understand the relationship between structural and biochemical changes in CNS white matter tracts. A decrease in the number of myelinated axons was associated with altered lipid profiles in the corpus callosum of aged mice. FTIR spectroscopic imaging revealed alterations in functional groups associated with phospholipids, including the lipid acyl, lipid ester and phosphate vibrations. Biochemical changes in white matter were observed prior to structural changes and most predominant in the anterior regions of the corpus callosum. This was supported by biochemical analysis of fatty acid composition that demonstrated an overall trend towards increased monounsaturated fatty acids and decreased polyunsaturated fatty acids with age. To further explore the molecular mechanisms underlying these biochemical alterations, gene expression profiles of lipid metabolism and oxidative stress pathways were investigated. A decrease in the expression of several genes involved in glutathione metabolism suggests that oxidative damage to lipids may contribute to age-related white matter degeneration.

Probing Heterogeneity in Attenuated Total Reflection Surface-Enhanced Infrared Absorption Spectroscopy (ATR-SEIRAS) Response with Synchrotron Infrared Microspectroscopy.

The heterogeneity of metal island films electrodeposited on conductive metal oxide modified internal reflection elements is shown to provide a variable attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) response. A self-assembled monolayer of a ferrocene-terminated thiol monolayer (FcC11SH) was formed on the gold islands covering a single substrate, which was measured using both a conventional spectrometer and a custom-built horizontal microscope. Cyclic voltammetry and ATR-SEIRAS results reveal that the FcC11SH-modified substrate undergoes a reversible electron transfer and an associated re-orientation of both the ferrocene/ferrocenium headgroup and the hydrocarbon backbone. The magnitude of the absorption signal arising from the redox changes in the monolayer, as well as the IR signature arising from the ingress/egress of the perchlorate counterions, is shown to depend significantly on the size of the infrared beam spot when using a conventional Fourier transform infrared spectrometer. By performing equivalent measurements on a horizontal microscope, the primary cause of the differences in the signal level is found to be the heterogeneity in the density of gold islands on the conductive metal oxide.

Origin of micro-scale heterogeneity in polymerisation of photo-activated resin composites.

Photo-activated resin composites are widely used in industry and medicine. Despite extensive chemical characterisation, the micro-scale pattern of resin matrix reactive group conversion between filler particles is not fully understood. Using an advanced synchrotron-based wide-field IR imaging system and state-of-the-art Mie scattering corrections, we observe how the presence of monodispersed silica filler particles in a methacrylate based resin reduces local conversion and chemical bond strain in the polymer phase. Here we show that heterogeneity originates from a lower converted and reduced bond strain boundary layer encapsulating each particle, whilst at larger inter-particulate distances light attenuation and monomer mobility predominantly influence conversion. Increased conversion corresponds to greater bond strain, however, strain generation appears sensitive to differences in conversion rate and implies subtle distinctions in the final polymer structure. We expect these findings to inform current predictive models of mechanical behaviour in polymer-composite materials, particularly at the resin-filler interface.

Microsecond Resolved Infrared Spectroelectrochemistry Using Dual Frequency Comb IR Lasers.

A dual infrared frequency comb spectrometer with heterodyne detection has been used to perform time-resolved electrochemical attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). The measurement of the potential dependent desorption of a monolayer of a pyridine derivative (4-dimethylaminopyridine, DMAP) with time resolution as high as 4 µs was achieved without the use of step-scan interferometry. An analysis of the detection limit of the method as a function of both time resolution and measurement coadditions is provided and compared to step-scan experiments of an equivalent system. Dual frequency comb spectroscopy is shown to be highly amenable to time-resolved ATR-SEIRAS. Microsecond resolved spectra can be obtained with high spectral resolution and fractional monolayer detection limits in a total experimental duration that is 2 orders of magnitude less than the equivalent step-scan experiment.

Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectromicroscopy Using Synchrotron Radiation and Micromachined Silicon Wafers for Microfluidic Applications.

A custom-designed optical configuration compatible with the use of micromachined multigroove internal reflection elements (µ-groove IREs) for attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and imaging applications in microfluidic devices is described. The µ-groove IREs consist of several face-angled grooves etched into a single, monolithic silicon chip. The optical configuration permits individual grooves to be addressed by focusing synchrotron sourced IR light through a 150 µm pinhole aperture, restricting the beam spot size to a dimension smaller than that of the groove walls. The effective beam spot diameter at the ATR sampling plane is determined through deconvolution of the measured detector response and found to be 70 µm. The µ-groove IREs are highly compatible with standard photolithographic techniques as demonstrated by printing a 400 µm wide channel in an SU-8 film spin-coated on the IRE surface. Attenuated total reflection FT-IR mapping as a function of sample position across the channel illustrates the potential application of this approach for rapid prototyping of microfluidic devices.

Femtomole Infrared Spectroscopy at the Electrified Metal-Solution Interface.

Characterization of surface adsorbed species using infrared (IR) spectroscopy provides valuable information concerning interfacial chemical and physical processes. However, in situ infrared studies of surface areas approaching the IR diffraction limit, such as micrometer scale electrodes, require a hitherto unrealized means to obtain high signal-to-noise (S/N) spectra from femtomole quantities of adsorbed molecules. A major methodological breakthrough is described that couples the high brilliance of synchrotron-sourced infrared microscopy with attenuated total reflection surface enhanced infrared spectroscopy (ATR-SEIRAS). The method is shown to allow the spectral measurement of a monolayer of 4-methoxypyridine (MOP) adsorbed on a surface enhancing gold film electrode under fully operational electrochemistry conditions. A factor of 15 noise improvement is achieved with small apertures using synchrotron IR relative to a thermal IR source. The very low noise levels allow the measurement of high quality IR spectra of 2.5 fmol of molecules confined to a 125 µm2 beam spot.

Step-scan IR spectroelectrochemistry with ultramicroelectrodes: nonsurface enhanced detection of near femtomole quantities using synchrotron radiation.

The result of interfacing step-scan spectroelectrochemistry with an IR microscope and synchrotron infrared (SIR) radiation is provided here. An external reflectance cell containing a 25 µm gold ultramicroelectrode is employed to achieve an electrochemical time constant less than one microsecond. The use of a prototypical electrochemical system, i.e., the mass-transport controlled reduction of ferricyanide, allows for a proof of principle evaluation of the viability of SIR for step-scan spectroelectrochemistry. An analysis of the importance of accounting for synchrotron source variation over the prolonged duration of a step-scan experiment is provided. Modeling of the material flux in the restricted diffusion space afforded by the external reflectance cell allows the quantitative IR results to be compared to theoretical predictions. The results indicate that only at very short times does linear diffusion within the cavity dominate the electrode response and the majority of the transient signal operates under conditions of quasi-hemispherical diffusion. The analytical information provided by the IR signal is found to be considerably less than that derived from the current response due the latter's pronounced edge effects. The results provide a detection limit of 36 fmol for step-scan SIR measurements of ferrocyanide. Implications for future IR spectroelectrochemical studies in the microsecond domain are discussed.

Interface for time-resolved electrochemical infrared microspectroscopy using synchrotron infrared radiation.

A description of a coupled electrochemical and spectrometer interface using synchrotron infrared radiation is provided. The interface described allows for the precise and accurate timing needed for time-resolved IR spectroscopic studies of electrochemical systems. The overall interface uses a series of transistor-transistor logic trigger signals generated from the commercial FTIR spectrometer to regulate the recording of control, electrochemical, and IR signals with reproducible and adjustable timing. The instrument has been tested using a thin-layer electrochemical cell with synchrotron light focused through microscope optics. The time-resolved response of the benzoquinone/dihydroxybenzoquinone redox couple is illustrated as an example of the instrument's capability.

Synchrotron infrared radiation for electrochemical external reflection spectroscopy: a case study using ferrocyanide.

Synchrotron infrared radiation has been successfully coupled through an infrared (IR) microscope to a thin-cavity external reflectance cell to study the diffusion controlled redox of a ferrocyanide solution. Excellent signal-to-noise ratios were achieved even at aperture settings close to the diffraction limit. Comparisons of noise levels as a function of aperture size demonstrate that this can be attributed to the high brilliance of synchrotron radiation relative to a conventional thermal source. Time resolved spectroscopic studies of diffusion controlled redox behavior have been measured and compared to purely electrochemical responses of the thin-cavity cell. Marked differences between the two measurements have been explained by analyzing diffusion in both the axial (linear) and radial dimensions. Whereas both terms contribute to the measured current and charge, only species that originate in the volume element above the electrode and diffuse in the direction perpendicular to the electrode surface are interrogated by IR radiation. Implications for the use of ultramicroelectrodes and synchrotron IR (SIR) to study electrochemical processes in the submillisecond time domain are discussed.

Surface enhanced infrared absorption spectroscopy studies of DMAP adsorption on gold surfaces.

Attenuated total reflectance surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) measurements have been employed to study the adsorption of dimethylaminopyridine (DMAP) and its conjugate acid (DMAPH+) on gold surfaces as a function of applied potential and solution pH. Based on our transmission measurements, we have been able to demonstrate that the acid/base forms of this pyridine derivative can be readily differentiated due to their distinct IR signals. When the solution pH is equal to the pKa of DMAPH+, we demonstrate that the adsorbing species is DMAP, oriented with its heterocyclic ring perpendicular to the electrode surface. In acidic electrolytes, our SEIRAS data provide direct spectroscopic evidence of DMAP monolayer formation even though the pH is 5 units below the pKa of the conjugate acid. Our data support a potential induced deprotonation of the endocyclic nitrogen and resulting coordination of the nitrogen lone pair to the gold surface. Both of these results confirm our existing model of DMAP adsorption previously based solely on electrochemical measurements. However, the present SEIRAS study also indicates that, at low pH, DMAPH+ can electrostatically coordinate to very negatively charged surfaces. This mode of adsorption was previously unobserved, illustrating the ability of in situ spectroscopic techniques to reveal new information that is not apparent from traditional electrochemical techniques such as differential capacity and chronocoulometry.

Spectroscopy of human plasma for diagnosis of idiopathic Parkinson's disease.

BACKGROUND: No established chemical biomarkers of idiopathic Parkinson's disease (PD) currently exist. Augmented oxidative stress (OS) has been implicated in both neural and peripheral PD tissues. METHODS: In this study, Raman scattering and near-infrared spectroscopy were used to detect and quantify oxidative substrate modifications in blood plasma samples from PD and normal elderly control (NEC) subjects. RESULTS: Hypothesis-driven preselection of OS-sensitive bandwidths distinguished PD from NEC subjects with approximately 75% sensitivity and specificity using both complementary spectroscopic techniques. CONCLUSION: Biospectroscopy of plasma may provide a rapid, minimally invasive and inexpensive chemical biomarker of idiopathic PD.

Noninvasive metabolomic profiling of embryo culture media using Raman and near-infrared spectroscopy correlates with reproductive potential of embryos in women undergoing in vitro fertilization.

OBJECTIVE: To determine if metabolomic profiling of embryo culture media correlates with reproductive potential of individual embryos. DESIGN: Prospective study. SETTING: An academic and a private assisted reproduction program; a university research center. PATIENT(S): Women undergoing assisted reproduction treatment. INTERVENTION(S): Sixty-nine spent media samples from 30 patients with known outcome (0 or 100% sustained implantation rates) were individually collected after embryo transfer on day 3 and were evaluated using Raman and/or near-infrared spectroscopy. The spectra obtained from each instrument were separately analyzed using a wavelength selective genetic algorithm to determine regions predictive of pregnancy outcome. Viability indices reflective of reproductive potential were calculated for each sample. To avoid random correlations, a leave-one-out cross-validation was used. Sensitivity and specificity of predicting viability (described as implantation and delivery) were calculated. MAIN OUTCOME MEASURE(S): Metabolomic profile of culture media and embryo viability. RESULT(S): Viability indices calculated by Raman or near-infrared spectroscopy were higher for embryos that implanted and resulted in a delivery, compared with those that failed to implant. Raman spectroscopy predicted viability of individual embryos with a sensitivity of 86% and a specificity of 76.5%; near-infrared provided a sensitivity of 75% and a specificity of 83.3%. CONCLUSION(S): Rapid, noninvasive metabolomic profiling of human embryo culture media using Raman or near-infrared spectroscopy combined with bioinformatics correlates with pregnancy outcome.