Unveiling the importance of the C-terminus in the sugar acid dehydratase of the IlvD/EDD superfamily.

Microbial non-phosphorylative oxidative pathways present promising potential in the biosynthesis of platform chemicals from the hemicellulosic fraction of lignocellulose. An L-arabinonate dehydratase from Rhizobium leguminosarum bv. trifolii catalyzes the rate-limiting step in the non-phosphorylative oxidative pathways, that is, converts sugar acid to 2-dehydro-3-deoxy sugar acid. We have shown earlier that the enzyme forms a dimer of dimers, in which the C-terminal histidine residue from one monomer participates in the formation of the active site of an adjacent monomer. The histidine appears to be conserved across the sequences of sugar acid dehydratases. To study the role of the C-terminus, five variants (H579A, H579F, H579L, H579Q, and H579W) were produced. All variants showed decreased activity for the tested sugar acid substrates, except the variant H579L on D-fuconate, which showed about 20% increase in activity. The reaction kinetic data showed that the substrate preference was slightly modified in H579L compared to the wild-type enzyme, demonstrating that the alternation of the substrate preference of sugar acid dehydratases is possible. In addition, a crystal structure of H579L was determined at 2.4 Å with a product analog 2-oxobutyrate. This is the first enzyme-ligand complex structure from an IlvD/EDD superfamily enzyme. The binding of 2-oxobutyrate suggests how the substrate would bind into the active site in the orientation, which could lead to the dehydration reaction. KEY POINTS: • Mutation of the last histidine at the C-terminus changed the catalytic activity of L-arabinonate dehydratase from R. leguminosarum bv. trifolii against various C5/C6 sugar acids. • The variant H579L of L-arabinonate dehydratase showed an alteration of substrate preferences compared with the wild type. • The first enzyme-ligand complex crystal structure of an IlvD/EDD superfamily enzyme was solved.

Structural insights into ternary immunocomplex formation and cross-reactivity: binding of an anti-immunocomplex FabB12 to Fab220-testosterone complex.

Anti-immunocomplex (Anti-IC) antibodies have been used in developing noncompetitive immunoassays for detecting small molecule analytics (haptens). These antibodies bind specifically to the primary antibody in complex with hapten. Although several anti-IC antibody-based immunoassays have been developed, structural studies of these systems are very limited. In this study, we determined the crystal structures of anti-testosterone Fab220 in complex with testosterone and the corresponding anti-IC antibody FabB12. The structure of the ternary complex of testosterone, Fab220, and FabB12 was predicted using LightDock and AlphaFold. The ternary complex has a large (~ 1100 Å2) interface between antibodies. The A-ring of the testosterone bound by Fab220 also participates in the binding of the anti-IC antibody. The structural analysis was complemented by native mass spectrometry. The affinities for testosterone (TES) and three cross-reactive steroids [dihydrotestosterone (DHT), androstenedione (A4), and dehydroepiandrosterone sulfate (DHEA-S)] were measured, and ternary complex formation was studied. The results clearly show the ternary complex formation in the solution. Although DHT showed significant cross-reactivity, A4 and DHEA-S exhibited minor cross-reactivity.

Robust Approach for Quantifying Glucocorticoid Binding to the Anti-Cortisol Fab Fragment via Native Mass Spectrometry.

In the development of proteins, aptamers, and molecular imprints for diagnostic purposes, a major goal is to obtain a molecule with both a high binding affinity and specificity for the target ligand. Cushing syndrome or Addison's disease can be diagnosed by cortisol level tests. We have previously characterized and solved the crystal structure of an anti-cortisol (17) Fab fragment having a high affinity to cortisol but also significant cross-reactivity to other glucocorticoids, especially the glucocorticoid drug prednisolone. We used native mass spectrometry (MS) to determine the binding affinities of nine steroid hormones to anti-cortisol (17) Fab, including steroidogenic precursors of cortisol. Based on the results, the number of hydroxyl groups in the structure of a steroid ligand plays a key role in the antigen recognition by the Fab fragment as the ligands with three hydroxyl groups, cortisol and prednisolone, had the highest affinities. The antibody affinity toward steroid hormones often decreases with a decrease in the number of hydroxyl groups in the structure. The presence of the hydroxyl group at position C11 increased the affinity more than did the other hydroxyl groups at positions C17 or C21. The binding affinities obtained by native MS were compared to the values determined by surface plasmon resonance (SPR), and the affinities were found to correlate well between these two techniques. Our study demonstrates that native MS with a large dynamic range and high sensitivity is a versatile tool for ligand binding studies of proteins.

Structural insight to elucidate the binding specificity of the anti-cortisol Fab fragment with glucocorticoids.

Cortisol is a steroid hormone that is produced by the adrenal gland. It is a primary stress hormone that increases glucose levels in the blood stream. High concentrations of cortisol in the body can be used as a biomarker for acute and chronic stress and related mental and physiological disorders. Therefore, the accurate quantification of cortisol levels in body fluids is essential for clinical diagnosis. In this article, we describe the isolation of recombinant anti-cortisol antibodies with high affinity for cortisol and discover their cross-reactivity with other glucocorticoids. To describe the cortisol binding site and elucidate the structural basis for the binding specificity, the high-resolution crystal structures of the anti-cortisol (17) Fab fragment in the absence of glucocorticoid (2.00 Å) and the presence of cortisol (2.26 Å), corticosterone (1.86 Å), cortisone (1.85 Å) and prednisolone (2.00 Å) were determined. To our knowledge, this is the first determined crystal structure of a cortisol-specific antibody. The recognition of cortisol is driven by hydrophobic interactions and hydrogen bonding at the protein-ligand interface coupled with a conformational transition. Comparison of ligand-free and ligand-bound structures showed that the side chains of residues Tyr58-H and Arg56-H can undergo local conformational changes at the binding site, most likely prior to the binding event via a conformational selection mechanism. Compared to other anti-steroid antibody-antigen complexes, (17) Fab possesses a structurally unique steroid binding site, as the H3 loop from the CDR area has only a minor contribution, but framework residues have a prominent contribution to hapten binding.

Calculation and Visualization of Binding Equilibria in Protein Studies.

A set of simulation applets has been developed for visualizing the behavior of the association and dissociation reactions in protein studies. These reactions are simple equilibrium reactions, and the equilibrium constants, most often dissociation constant K D, are useful measures of affinity. Equilibria, even in simple systems, may not behave intuitively, which can cause misconceptions and mistakes. These applets can be utilized for planning experiments, for verifying experimental results, and for visualization of the equilibria in education. The considered reactions include protein homodimerization, ligand binding to a receptor (or heterodimerization), and competitive ligand binding. The latter one can be considered as either a ligand binding to two receptors or a binding of two ligands to a single receptor. In general, the user is required to input the total concentrations of all proteins and ligands and the dissociation constants of all complexes, and the applets output the equilibrium concentrations of all protein species graphically as functions of concentration and as numerical values at a specified point. Also, a curve fitting tool is provided which roughly estimates the concentrations or the dissociation constants based on the experimental data. The applets are freely available online (URL: https://protsim.github.io/protsim) and readily hackable for custom purposes if necessary.

Three-dimensional structure of xylonolactonase from Caulobacter crescentus: A mononuclear iron enzyme of the 6-bladed ß-propeller hydrolase family.

Xylonolactonase Cc XylC from Caulobacter crescentus catalyzes the hydrolysis of the intramolecular ester bond of d-xylonolactone. We have determined crystal structures of Cc XylC in complex with d-xylonolactone isomer analogues d-xylopyranose and (r)-(+)-4-hydroxy-2-pyrrolidinone at high resolution. Cc XylC has a 6-bladed ß-propeller architecture, which contains a central open channel having the active site at one end. According to our previous native mass spectrometry studies, Cc XylC is able to specifically bind Fe2+ . The crystal structures, presented here, revealed an active site bound metal ion with an octahedral binding geometry. The side chains of three amino acid residues, Glu18, Asn146, and Asp196, which participate in binding of metal ion are located in the same plane. The solved complex structures allowed suggesting a reaction mechanism for intramolecular ester bond hydrolysis in which the major contribution for catalysis arises from the carbonyl oxygen coordination of the xylonolactone substrate to the Fe2+ . The structure of Cc XylC was compared with eight other ester hydrolases of the ß-propeller hydrolase family. The previously published crystal structures of other ß-propeller hydrolases contain either Ca2+ , Mg2+ , or Zn2+ and show clear similarities in ligand and metal ion binding geometries to that of Cc XylC. It would be interesting to reinvestigate the metal binding specificity of these enzymes and clarify whether they are also able to use Fe2+ as a catalytic metal. This could further expand our understanding of utilization of Fe2+ not only in oxidative enzymes but also in hydrolases.

Xylonolactonase from Caulobacter crescentus Is a Mononuclear Nonheme Iron Hydrolase.

Caulobacter crescentus xylonolactonase (Cc XylC, EC 3.1.1.68) catalyzes an intramolecular ester bond hydrolysis over a nonenzymatic acid/base catalysis. Cc XylC is a member of the SMP30 protein family, whose members have previously been reported to be active in the presence of bivalent metal ions, such as Ca2+, Zn2+, and Mg2+. By native mass spectrometry, we studied the binding of several bivalent metal ions to Cc XylC and observed that it binds only one of them, namely, the Fe2+ cation, specifically and with a high affinity (Kd = 0.5 µM), pointing out that Cc XylC is a mononuclear iron protein. We propose that bivalent metal cations also promote the reaction nonenzymatically by stabilizing a short-lived bicyclic intermediate on the lactone isomerization reaction. An analysis of the reaction kinetics showed that Cc XylC complexed with Fe2+ can speed up the hydrolysis of d-xylono-1,4-lactone by 100-fold and that of d-glucono-1,5-lactone by 10-fold as compared to the nonenzymatic reaction. To our knowledge, this is the first discovery of a nonheme mononuclear iron-binding enzyme that catalyzes an ester bond hydrolysis reaction.

Current state of and need for enzyme engineering of 2-deoxy-D-ribose 5-phosphate aldolases and its impact.

Deoxyribose-5-phosphate aldolases (DERAs, EC 4.1.2.4) are acetaldehyde-dependent, Class I aldolases catalyzing in nature a reversible aldol reaction between an acetaldehyde donor (C2 compound) and glyceraldehyde-3-phosphate acceptor (C3 compound, C3P) to generate deoxyribose-5-phosphate (C5 compound, DR5P). DERA enzymes have been found to accept also other types of aldehydes as their donor, and in particular as acceptor molecules. Consequently, DERA enzymes can be applied in C-C bond formation reactions to produce novel compounds, thus offering a versatile biocatalytic alternative for synthesis. DERA enzymes, found in all kingdoms of life, share a common TIM barrel fold despite the low overall sequence identity. The catalytic mechanism is well-studied and involves formation of a covalent enzyme-substrate intermediate. A number of protein engineering studies to optimize substrate specificity, enzyme efficiency, and stability of DERA aldolases have been published. These have employed various engineering strategies including structure-based design, directed evolution, and recently also machine learning-guided protein engineering. For application purposes, enzyme immobilization and usage of whole cell catalysis are preferred methods as they improve the overall performance of the biocatalytic processes, including often also the stability of the enzyme. Besides single-step enzymatic reactions, DERA aldolases have also been applied in multi-enzyme cascade reactions both in vitro and in vivo. The DERA-based applications range from synthesis of commodity chemicals and flavours to more complicated and high-value pharmaceutical compounds. KEY POINTS: • DERA aldolases are versatile biocatalysts able to make new C-C bonds. • Synthetic utility of DERAs has been improved by protein engineering approaches. • Computational methods are expected to speed up the future DERA engineering efforts.

Allergens and their associated small molecule ligands-their dual role in sensitization.

Many allergens feature hydrophobic cavities that allow the binding of primarily hydrophobic small-molecule ligands. Ligand-binding specificities can be strict or promiscuous. Serum albumins from mammals and birds can assume multiple conformations that facilitate the binding of a broad spectrum of compounds. Pollen and plant food allergens of the family 10 of pathogenesis-related proteins bind a variety of small molecules such as glycosylated flavonoid derivatives, flavonoids, cytokinins, and steroids in vitro. However, their natural ligand binding was reported to be highly specific. Insect and mammalian lipocalins transport odorants, pheromones, catecholamines, and fatty acids with a similar level of specificity, while the food allergen ß-lactoglobulin from cow's milk is notably more promiscuous. Non-specific lipid transfer proteins from pollen and plant foods bind a wide variety of lipids, from phospholipids to fatty acids, as well as sterols and prostaglandin B2, aided by the high plasticity and flexibility displayed by their lipid-binding cavities. Ligands increase the stability of allergens to thermal and/or proteolytic degradation. They can also act as immunomodulatory agents that favor a Th2 polarization. In summary, ligand-binding allergens expose the immune system to a variety of biologically active compounds whose impact on the sensitization process has not been well studied thus far.

Structural Insights into the Mechanisms Underlying the Kinetic Stability of GH28 Endo-Polygalacturonase.

Thermostability is a key property of industrial enzymes. Endo-polygalacturonases of the glycoside hydrolase family 28 have many practical applications, but only few of their structures have been determined, and the reasons for their stability remain unclear. We identified and characterized the Talaromyces leycettanus JCM12802 endo-polygalacturonase TlPGA, which differs from other GH28 family members because of its high catalytic activity, with an optimum temperature of 70 °C. Distinctive features were revealed by comparison of thermophilic TlPGA and all known structures of fungal endo-polygalacturonases, including a relatively large exposed polar accessible surface area in thermophilic TlPGA. By mutating potentially important residues in thermophilic TlPGA, we identified Thr284 as a critical residue. Mutant T284A was comparable to thermophilic TlPGA in melting temperature but exhibited a significantly lower half-life and half-inactivation temperature, implicating residue Thr284 in the kinetic stability of thermophilic TlPGA. Structure analysis of thermophilic TlPGA and mutant T284A revealed that a carbon-oxygen hydrogen bond between the hydroxyl group of Thr284 and the Cα atom of Gln255, and the stable conformation adopted by Gln255, contribute to its kinetic stability. Our results clarify the mechanism underlying the kinetic stability of GH28 endo-polygalacturonases and may guide the engineering of thermostable enzymes for industrial applications.

Substrate specificity of 2-deoxy-D-ribose 5-phosphate aldolase (DERA) assessed by different protein engineering and machine learning methods.

In this work, deoxyribose-5-phosphate aldolase (Ec DERA, EC 4.1.2.4) from Escherichia coli was chosen as the protein engineering target for improving the substrate preference towards smaller, non-phosphorylated aldehyde donor substrates, in particular towards acetaldehyde. The initial broad set of mutations was directed to 24 amino acid positions in the active site or in the close vicinity, based on the 3D complex structure of the E. coli DERA wild-type aldolase. The specific activity of the DERA variants containing one to three amino acid mutations was characterised using three different substrates. A novel machine learning (ML) model utilising Gaussian processes and feature learning was applied for the 3rd mutagenesis round to predict new beneficial mutant combinations. This led to the most clear-cut (two- to threefold) improvement in acetaldehyde (C2) addition capability with the concomitant abolishment of the activity towards the natural donor molecule glyceraldehyde-3-phosphate (C3P) as well as the non-phosphorylated equivalent (C3). The Ec DERA variants were also tested on aldol reaction utilising formaldehyde (C1) as the donor. Ec DERA wild-type was shown to be able to carry out this reaction, and furthermore, some of the improved variants on acetaldehyde addition reaction turned out to have also improved activity on formaldehyde. KEY POINTS: • DERA aldolases are promiscuous enzymes. • Synthetic utility of DERA aldolase was improved by protein engineering approaches. • Machine learning methods aid the protein engineering of DERA.

Development of hypoallergenic variants of the major horse allergen Equ c 1 for immunotherapy by rational structure based engineering.

The use of recombinant allergens is a promising approach in allergen-specific immunotherapy (AIT). Considerable limitation, however, has been the ability of recombinant allergens to activate effector cells leading to allergic reactions. Recombinant hypoallergens with preserved protein folding and capacity to induce protective IgG antibodies binding effectively to the native allergen upon sensitization would be beneficial for safer AIT. In this study, hypoallergen variants of the major horse allergen Equ c 1 were designed by introducing one point mutation on the putative IgE epitope region and two mutations on the monomer-monomer interface of Equ c 1 dimer. The recombinant Equ c 1 wild type and the variants were produced and purified to homogeneity, characterized by size-exclusion ultra-high performance liquid chromatography and ultra-high resolution mass spectrometry. The IgE-binding profiles were analyzed by a competitive immunoassay and the biological activity by a histamine release assay using sera from horse allergic individuals. Two Equ c 1 variants, Triple 2 (V47K + V110E + F112K) and Triple 3 (E21Y + V110E + F112K) showed lower allergen-specific IgE-binding capacity and decreased capability to release histamine from basophils in vitro when using sera from six allergic individuals. Triple 3 showed higher reduction than Triple 2 in IgE-binding (5.5 fold) and in histamine release (15.7 fold) compared to wild type Equ c 1. Mutations designed on the putative IgE epitope region and monomer-monomer interface of Equ c 1 resulted in decreased dimerization, a lower IgE-binding capacity and a reduced triggering of an allergic response in vitro.

Thermokinetic Analysis of Protein Subunit Exchange by Variable-Temperature Native Mass Spectrometry.

Many protein complexes are assembled from a varying number of subunits, which are continuously exchanging with diverse time scales. This structural dynamics is considered to be important for many regulatory and sensory adaptation processes that occur in vivo. We have developed an accurate method for monitoring protein subunit exchange by using native electrospray ionization mass spectrometry (ESI-MS), exemplified here for an extremely stable Rad50 zinc hook (Hk) dimer assembly, Zn(Hk)2. The method has two steps: appropriate protein/peptide mutation and native ESI-MS analysis using a variable-temperature sample inlet. In this work, two Hk mutants were produced, mixed with wild-type Hk, and measured at three different temperatures. A thermokinetic analysis of heterodimer formation allowed us to determine the enthalpy, entropy, and Gibbs free energy of activation for subunit exchange, showing that the reaction is slow and associated with a high enthalpic barrier, consistent with the exceptionally high stability of the Zn(Hk)2 assembly.

Quantitation of Thyroid Hormone Binding to Anti-Thyroxine Antibody Fab Fragment by Native Mass Spectrometry.

Thyroid hormones are important regulatory hormones, acting on nearly every cell in the body. The two main thyroid hormones are l-thyroxine (tetraiodo-l-thyronine, T4) and 3,3',5-triiodo-l-thyronine (T3), which are produced in the thyroid gland and secreted into the blood stream. Other important thyroid hormone metabolites are 3,3'-diiodo-l-thyronine (T2) and l-thyronine (T0), which may show increased levels in circulation due to dietary iodine deficiency or other medical disorders. Owing to their central role in cellular functions, sensitive and specific detection methods for thyroid hormones are needed. In this work, native mass spectrometry (MS) was used to quantitate thyroid hormone binding to the anti-T4 antibody Fab fragment. First, the binding affinity for T2 was determined via direct ligand titration experiments. Then, the affinities for the other ligands were determined by competition experiments using T2 as the "low-affinity" reference ligand. The highest affinity was measured for T3, followed by T4, T2, and T0 (K d = 29, 3.4, and 260 nM and 130 µM, respectively). Thus, it is evident that the number and positions of the iodine substituents within the thyronine rings are important for the ligand binding affinity of anti-T4 Fab. Surprisingly, structurally related tetrahalogen bisphenols were also able to bind to anti-T4 Fab with nanomolar affinities.

Bioconjugation with Aminoalkylhydrazine for Efficient Mass Spectrometry-Based Detection of Small Carbonyl Compounds.

Bioconjugation through oxime or hydrazone formation is a versatile strategy for covalent labeling of biomolecules in vitro and in vivo. In this work, a mass spectrometry-based method was developed for the bioconjugation of small carbonyl compounds (CCs) with an aminoalkylhydrazine to form stable hydrazone conjugates that are readily detectable with electrospray ionization mass spectrometry (ESI-MS). Out of all hydrazine reagents tested, 2-(dimethylamino)ethylhydrazine (DMAEH) was selected for further analysis due to the fastest reaction rates observed. A thorough study of the reaction kinetics between structurally varied short-chain CCs and DMAEH was performed with the second-order reaction rate constants spanning in the range of 0.23-208 M-1 s-1. In general, small aldehydes reacted faster than the corresponding ketones. Moreover, a successful reaction monitoring of a deoxyribose-5-phosphate aldolase-catalyzed reversible retro-aldol cleavage of deoxyribose was demonstrated. Thus, the developed method shows potential also for ESI-MS-based enzyme kinetics studies.

The peroxisomal zebrafish SCP2-thiolase (type-1) is a weak transient dimer as revealed by crystal structures and native mass spectrometry.

The SCP2 (sterol carrier protein 2)-thiolase (type-1) functions in the vertebrate peroxisomal, bile acid synthesis pathway, converting 24-keto-THC-CoA and CoA into choloyl-CoA and propionyl-CoA. This conversion concerns the ß-oxidation chain shortening of the steroid fatty acyl-moiety of 24-keto-THC-CoA. This class of dimeric thiolases has previously been poorly characterized. High-resolution crystal structures of the zebrafish SCP2-thiolase (type-1) now reveal an open catalytic site, shaped by residues of both subunits. The structure of its non-dimerized monomeric form has also been captured in the obtained crystals. Four loops at the dimer interface adopt very different conformations in the monomeric form. These loops also shape the active site and their structural changes explain why a competent active site is not present in the monomeric form. Native mass spectrometry studies confirm that the zebrafish SCP2-thiolase (type-1) as well as its human homolog are weak transient dimers in solution. The crystallographic binding studies reveal the mode of binding of CoA and octanoyl-CoA in the active site, highlighting the conserved geometry of the nucleophilic cysteine, the catalytic acid/base cysteine and the two oxyanion holes. The dimer interface of SCP2-thiolase (type-1) is equally extensive as in other thiolase dimers; however, it is more polar than any of the corresponding interfaces, which correlates with the notion that the enzyme forms a weak transient dimer. The structure comparison of the monomeric and dimeric forms suggests functional relevance of this property. These comparisons provide also insights into the structural rearrangements that occur when the folded inactive monomers assemble into the mature dimer.

Unraveling Substrate Specificity and Catalytic Promiscuity of Aspergillus oryzae Catechol Oxidase.

Catechol oxidases and tyrosinases are coupled binuclear copper enzymes that oxidize various o-diphenolic compounds to corresponding o-quinones. Tyrosinases have an additional monooxygenation ability to hydroxylate monophenol to o-diphenol. It is still not clear what causes the difference in the catalytic activities. We solved a complex structure of Aspergillus oryzae catechol oxidase with resorcinol bound into the active site. Catalytic activity of A. oryzae catechol oxidase was studied, for the first time, by high-resolution FT-ICR mass spectrometry to shed light on the reaction mechanism. The enzyme was also found to catalyze monooxygenation of small phenolics, which provides a novel perspective for the discussion of differences in the catalytic activity between tyrosinases and catechol oxidases. According to the results, two binding modes for resorcinol are suggested and a reaction mechanism for coupled binuclear copper enzymes is discussed.

A new crystal form of Aspergillus oryzae catechol oxidase and evaluation of copper site structures in coupled binuclear copper enzymes.

Coupled binuclear copper (CBC) enzymes have a conserved type 3 copper site that binds molecular oxygen to oxidize various mono- and diphenolic compounds. In this study, we found a new crystal form of catechol oxidase from Aspergillus oryzae (AoCO4) and solved two new structures from two different crystals at 1.8-Å and at 2.5-Å resolutions. These structures showed different copper site forms (met/deoxy and deoxy) and also differed from the copper site observed in the previously solved structure of AoCO4. We also analysed the electron density maps of all of the 56 CBC enzyme structures available in the protein data bank (PDB) and found that many of the published structures have vague copper sites. Some of the copper sites were then re-refined to find a better fit to the observed electron density. General problems in the refinement of metalloproteins and metal centres are discussed.

The crystal structure of D-xylonate dehydratase reveals functional features of enzymes from the Ilv/ED dehydratase family.

The Ilv/ED dehydratase protein family includes dihydroxy acid-, gluconate-, 6-phosphogluconate- and pentonate dehydratases. The members of this family are involved in various biosynthetic and carbohydrate metabolic pathways. Here, we describe the first crystal structure of D-xylonate dehydratase from Caulobacter crescentus (CcXyDHT) at 2.7 Å resolution and compare it with other available enzyme structures from the IlvD/EDD protein family. The quaternary structure of CcXyDHT is a tetramer, and each monomer is composed of two domains in which the N-terminal domain forms a binding site for a [2Fe-2S] cluster and a Mg2+ ion. The active site is located at the monomer-monomer interface and contains residues from both the N-terminal recognition helix and the C-terminus of the dimeric counterpart. The active site also contains a conserved Ser490, which probably acts as a base in catalysis. Importantly, the cysteines that participate in the binding and formation of the [2Fe-2S] cluster are not all conserved within the Ilv/ED dehydratase family, which suggests that some members of the IlvD/EDD family may bind different types of [Fe-S] clusters.

Insights into the roles of non-catalytic residues in the active site of a GH10 xylanase with activity on cellulose.

Bifunctional glycoside hydrolases have potential for cost-savings in enzymatic decomposition of plant cell wall polysaccharides for biofuels and bio-based chemicals. The N-terminal GH10 domain of a bifunctional multimodular enzyme CbXyn10C/Cel48B from Caldicellulosiruptor bescii is an enzyme able to degrade xylan and cellulose simultaneously. However, the molecular mechanism underlying its substrate promiscuity has not been elucidated. Herein, we discovered that the binding cleft of CbXyn10C would have at least six sugar-binding subsites by using isothermal titration calorimetry analysis of the inactive E140Q/E248Q mutant with xylo- and cello-oligosaccharides. This was confirmed by determining the catalytic efficiency of the wild-type enzyme on these oligosaccharides. The free form and complex structures of CbXyn10C with xylose- or glucose-configured oligosaccharide ligands were further obtained by crystallographic analysis and molecular modeling and docking. CbXyn10C was found to have a typical (ß/α)8-TIM barrel fold and "salad-bowl" shape of GH10 enzymes. In complex structures with xylo-oligosaccharides, seven sugar-binding subsites were found, and many residues responsible for substrate interactions were identified. Site-directed mutagenesis indicated that 6 and 10 amino acid residues were key residues for xylan and cellulose hydrolysis, respectively. The most important residues are centered on subsites -2 and -1 near the cleavage site, whereas residues playing moderate roles could be located at more distal regions of the binding cleft. Manipulating the residues interacting with substrates in the distal regions directly or indirectly improved the activity of CbXyn10C on xylan and cellulose. Most of the key residues for cellulase activity are conserved across GH10 xylanases. Revisiting randomly selected GH10 enzymes revealed unreported cellulase activity, indicating that the dual function may be a more common phenomenon than has been expected.