RESUMO
The metal-organic framework (MOF) H3[(Cu4Cl)3-(BTTri)8, H3BTTri = 1,3,5-tris(1H-1,2,3-triazol-5-yl)benzene] (CuBTTri) is a precatalyst for biomedically relevant nitric oxide (NO) release from S-nitrosoglutathione (GSNO). The questions of the number and nature of the catalytically most active, kinetically dominant sites are addressed. Also addressed is whether or not the well-defined structural geometry of MOFs (as solid-state analogues of molecular compounds) can be used to generate specific, testable hypotheses about, for example, if intrapore vs exterior surface metal sites are more catalytically active. Studies of the initial catalytic rate vs CuBTTri particle external surface area to interior volume ratio show that intrapore copper sites are inactive within the experimental error (≤1.7 × 10-5% of the observed catalytic activity)-restated, the traditional MOF intrapore metal site catalysis hypothesis is disproven for the current system. All observed catalysis occurs at exterior surface Cu sites, within the experimental error. Fourier transform infrared (FT-IR) analysis of CN--poisoned CuBTTri reveals just two detectable Cu sites at a ca. ≥0.5% detection limit, those that bind three or one CN- ("Cu(CN)3" and "CuCN"), corresponding to the CN- binding expected for exterior surface, 3-coordinate (Cusurface) and intrapore, 5-coordinate (Cupore) sites predicted by the idealized, metal-terminated crystal structure. Two-coordinate Cu defect sites are ruled out at the ≥0.5% FT-IR detection limit as such defect sites would have been detectable by the FT-IR studies of the CN--poisoned catalyst. Size-selective poisoning studies of CuBTTri exterior surface sites reveal that 1.3 (±0.4)% of total copper in 0.6 ± 0.4 µm particles is active. That counting of active sites yields a normalized turnover frequency (TOF), TOFnorm = (4.9 ± 1.2) × 10-2 mol NO (mol Cusurface)-1 s-1 (in water, at 20 min, 25 °C, 1 mM GSNO, 30% loss of GSNO, and 1.3 ± 0.4 mol % Cusurface)-a value â¼100× higher than the TOF calculated without active site counting. Overall, Ockham's razor interpretation of the data is that exterior surface, Cusurface sites are the catalytically most active sites present at a 1.3 (±0.4)% level of total Cu.
RESUMO
Selective separation of enantiomers is a substantial challenge for the pharmaceutical industry. Chromatography on chiral stationary phases is the standard method, but at a very high cost for industrial-scale purification due to the high cost of the chiral stationary phases. Typically, these materials are poorly robust, expensive to manufacture, and often too specific for a single desired substrate, lacking desirable versatility across different chiral analytes. Here, we disclose a porous, robust homochiral metal-organic framework (MOF), TAMOF-1, built from copper(II) and an affordable linker prepared from natural l-histidine. TAMOF-1 has shown to be able to separate a variety of model racemic mixtures, including drugs, in a wide range of solvents of different polarity, outperforming several commercial chiral columns for HPLC separations. Although not exploited in the present article, it is worthy to mention that the preparation of this new material is scalable to the multikilogram scale, opening unprecedented possibilities for low-energy chiral separation at the industrial scale.
Assuntos
Estruturas Metalorgânicas/isolamento & purificação , Cromatografia Líquida de Alta Pressão , Cobre/química , Estruturas Metalorgânicas/química , Estrutura Molecular , Estereoisomerismo , Água/químicaRESUMO
Metal-organic frameworks (MOFs) are powerful chemosensors when designed to undergo a detectable change in optical properties upon interacting with target analytes. This work contributes to the overall understanding of metal-ion interactions with MOFs to elicit changes in fluorescence emission, a necessary step en route to developing more sensitive and selective systems for metal-ion sensing. Toward this goal, the photophysical properties of an amino-containing MOF, Cu3(NH2BTC)2, were investigated. The MOF was highly sensitive for the detection of Fe2+ and Fe3+ exhibiting the most intense fluorescence quenching with the lowest detectable change in signal occurring at 1.55 ppm (27.8 µM) at room temperature in minutes. Other metal ions, including Pb2+, Cu2+, Mn2+, Ni2+, and Co2+, were also detected at 5.7, 12, 3.0, 1.6, and 0.2 ppm, respectively, demonstrating the range of sensing capabilities. Additional experiments were performed to elucidate the pathway of metal-ion detection, including the investigation of photoluminescent changes upon the introduction of acids (HCl, ZrCl4, and AlCl3) and several anions (CO32-, OAc-, and Cr2O72-). To determine the influence of the amino functional group on interactions with the analytes, isoreticular Cu3BTC2 and postsynthetically modified Cu3(NH2BTC)2 (to hinder access to the free-amine moiety) were also investigated, revealing that the free amine is essential for the detection of the anions and is likely involved in the detection of several divalent metal ions. On the other hand, divalent metal ion Fe2+ likely induces an emission intensity change by interaction with the carboxylate of the MOF ligand or the open Cu2+ sites. Taken together, this report demonstrates that Cu3(NH2BTC)2 has unique photoluminescent properties and likely elicits detection of ions (ppm, µM) via multiple pathways. As such, future development of MOF-based sensors should include MOFs with free accessible functional handles (such as an amine) to be strategically modified to selectively detect specific metal ions.
RESUMO
Copper containing compounds catalyze decomposition of S-Nitrosoglutathione (GSNO) in the presence of glutathione (GSH) yielding glutathione disulfide (GSSG) and nitric oxide (NO). Extended NO generation from an endogenous source is medically desirable to achieve vasodilation, reduction in biofilms on medical devices, and antibacterial activity. Homogeneous and heterogeneous copper species catalyze release of NO from endogenous GSNO. One heterogeneous catalyst used for GSNO decomposition in blood plasma is the metal-organic framework (MOF), H3[(Cu4Cl)3-(BTTri)8, H3BTTriâ¯=â¯1,3,5-tris(1H-1,2,3-triazol-5-yl) benzene] (CuBTTri). Fundamental questions about these systems remain unanswered, despite their use in biomedical applications, in part because no method previously existed for simultaneous tracking of [GSNO], [GSH], and [GSSG] in water. Tracking these reactions in water is a necessary step towards study in biological media (blood is approximately 80% water) where NO release systems must operate. Even the balanced stoichiometry remains unknown for copper-ion and CuBTTri catalyzed GSNO decomposition. Herein, we report a direct 1H NMR method which: simultaneously monitors [GSNO], [GSH], and [GSSG] in water; provides the experimentally determined stoichiometry for copper-ion vs CuBTTri catalyzed GSNO decomposition; reveals that the CuBTTri-catalyzed reaction reaches 10% GSNO decomposition (16â¯h) without added GSH, yet the copper-ion catalyzed reaction reaches 100% GSNO decomposition (16â¯h) without added GSH; and shows 100% GSNO decomposition upon addition of stoichiometric GSH to the CuBTTri catalyzed reaction. These observations provide evidence that copper-ion and CuBTTri catalyzed GSNO decomposition in water operate through different reaction mechanisms, the details of which can now be probed by 1H NMR kinetics and other needed studies.
Assuntos
Cobre/química , Estruturas Metalorgânicas/química , Óxido Nítrico/química , Espectroscopia de Prótons por Ressonância Magnética/métodos , S-Nitrosoglutationa/química , Água/química , Catálise , Imageamento por Ressonância Magnética , Compostos de Sulfidrila/químicaRESUMO
In the present study, a new copper metal-organic framework (MOF)-cotton material was strategically fabricated to exploit its antibacterial properties for postsynthetic modification (PSM) to introduce a free amine to tune the physicochemical properties of the material. A modified methodology for carboxymethylation of natural cotton was utilized to enhance the number of nucleation sites for the MOF growth. Subsequently, MOF Cu3(NH2BTC)2 was synthesized into a homogenous surface-supported film via a layer-by-layer dip-coating process. The resultant materials contained uniformly distributed 1 µm × 1 µm octahedral MOF crystals around each carboxymethylated fiber. Importantly, the accessible free amine of the MOF ligand allowed for the PSM of the MOF-cotton surface with valeric anhydride, yielding 23.5 ± 2.2% modified. The Cu2+ ion-releasing performance of the materials was probed under biological conditions per submersion in complex media at 37 °C. Indeed, PSM induces a change in the copper flux of the material over the first 6 h. The materials continue to slowly release Cu2+ ions beyond 24 h tested at a flux of 0.22 ± 0.003 µmol·cm-2·h-1 with the unmodified MOF-cotton and at 0.25 ± 0.004 µmol·cm-2·h-1 with the modified MOF-cotton. The antibacterial activity of the material was explored using Escherichia coli by testing the planktonic and attached bacteria under a variety of conditions. MOF-cotton materials elicit antibacterial effects, yielding a 4-log reduction or greater, after 24 h of exposure. Additionally, the MOF-cotton materials inhibit the attachment of bacteria, under both dry and wet conditions. A material of this type would be ideal for clothing, bandages, and other textile applications. As such, this work serves as a precedence toward developing uniform, tunable MOF-composite textile materials that can kill bacteria and prevent the attachment of bacteria to the surface.
Assuntos
Estruturas Metalorgânicas/química , Antibacterianos , Cobre , Escherichia coli , TêxteisRESUMO
Functionalized tryptamines are targets of interest for development as small molecule therapeutics. The ring opening of aziridines with indoles is a powerful method for tryptamine synthesis where isomer formation can be controlled. 3,5-Dinitrobenzoyl (DNB)-protected aziridines undergo regioselective, enantiospecific ring opening to produce ß-substituted tryptamines for a series of indoles. Attack at the more substituted aziridine carbon occurs in an SN2-like fashion to generate DNB-tryptamine products as synthetic precursors.
Assuntos
Triptaminas/química , Aziridinas , Estrutura Molecular , EstereoisomerismoRESUMO
The overall versatility of a material can be immensely expanded by the ability to controllably tune its hydrophobicity. Herein we took advantage of steric bias to demonstrate that tricarboxylate metal-organic frameworks (MOFs) can undergo covalent postsynthetic modification to confer various degrees of hydrophobicity. MOF copper 2-aminobenzene-1,3,5-tricarboxylate was modified with varying-length aliphatic carbon chains. Unmodified Cu3(NH2BTC)2 degrades in minutes upon contact with water, whereas modification as low as 14% results in powders that show significantly enhanced hydrophobic character with contact angles up to 147°. The modified material is capable of withstanding direct contact with water for 30 min with no visual evidence of altered surface characteristics. A linear relationship was observed between the length of the tethered chain and the water contact angle. These results reveal a predictable method for achieving a range of desirable sorption rates and highly controllable hydrophobic character. This work thereby expands the possibilities of rationally modifying MOFs for a plethora of target-specific applications.