Influence of Architecture on the Interfacial Properties of Polymers: Linear Chains, Stars, and Microgels.

Surface-active polymers have important applications as effective and responsive emulsifiers, foaming agents, and coatings. In this contribution, we explore the impact of the polymer architecture on the behavior at oil-water interfaces by comparing different poly(N-isopropylacrylamide) (pNIPAM)-based systems, namely, monolayers of linear and star-shaped macromolecules, ultralow cross-linked, regular cross-linked, and hollow microgels. Compression isotherms were determined experimentally as well as by computer simulations. The latter provides information about the conformational changes of the individual macromolecules as well as the interfacial properties of the monolayer, including the surface structure and the density distribution of an ensemble of interacting macromolecules near an interface. Surprisingly, the isotherms of the linear polymer, of the star polymer, and of the ultralow cross-linked microgel have an identical shape that differs from the isotherms of regular and hollow microgels. We introduced the mass fraction of adsorbed polymer, which gives a measure of the polymer segments contributing to the isotherm in relation to the most flexible architecture, i.e., the linear polymer, and allows a comparison of polymers with different architectures. The data demonstrate that increasing the number of cross-links leads to a significantly lower amount of polymer in the proximity of the interface as the increase in cross-linker reduces the deformability or softness of the polymers at the interface. The volume fraction profiles along the normal to the interface are essentially different in the microgel monolayers as compared to those in the linear and star polymer. The profiles through the microgel contact line and their growth upon initial compression are similar to those of the linear chains. Herewith, the profiles through the center of mass practically do not change upon compression. Therefore, the initial growth in the microgel surface pressure reveals the polymer-like behavior and is related to the deformation of the peripheral part of the microgel. Further compression of the microgel monolayer leads to 3D interactions of the microgels within the aqueous side of the interface and soft colloid-like behavior.

Compression and Ordering of Hollow Microgels in Monolayers Formed at Liquid-Liquid Interfaces.

Monolayers of polymer microgels with a spherical cavity adsorbed at the liquid-liquid interface were studied using mesoscopic computer simulations. One liquid, named water, was always considered as a good solvent, while the microgel solubility in the second liquid, named oil, was varied. The symmetric and asymmetric cases of vanishing and the strong differences in solubility between the network particles and the liquids were considered. The simulations provided us with an insight into the shape and volume changes of the microgels upon compression, making it possible to relate the response of the individual network with the collective order and structure of the monolayer. Similar to regular microgels, the compression of the monolayer of hollow particles led to a decrease in lateral sizes accompanied by shape transformation from a flattened to a nearly spherical shape. However, the presence of a cavity filled with solvent caused some unique differences in the behavior of the system. The adsorption pathway of hollow microgels at the liquid interface predefines: (a) the position of the particles with respect to the interface and (b) the structure of the monolayer. A striking discovery is that in the symmetric case of similar solubility of the microgel in both liquids, it is possible to produce a monolayer in which one part of the network faces the aqueous phase and the other part faces the oil phase. The polymer concentration profiles plotted along the normal to the interface reveal a redistribution of polymeric mass of the microgels relative to the interface, distinguishing between the microgels whose cavities are filled with water and oil, respectively. Moreover, the ratio between the microgels faced in water and oil does not change upon compression and predetermines the response and order of the monolayer.

Structure of swollen hollow polyelectrolyte nanogels with inhomogeneous cross-link distribution.

HYPOTHESIS: Recently, it has become possible to synthesize hollow polyelectrolyte nano- and microgels. The shell permeability can be controlled by external stimuli, while the cavity can serve as a storage place for guest molecules. However, there is a lack of a detailed understanding at the molecular level regarding the role of the network topology, inhomogeneities of the distribution of cross-links, and the impact of the electrostatics on the structural response of hollow microgel to external stimuli. To bridge these gaps, molecular dynamics (MD) of computer simulations are used. EXPERIMENTS: Here, we propose a fresh methodology to create realistic hollow microgel particles in silico. The technique involves a gradual change in the average local length of subchains depending on the distance to the center of mass of the microgel particles resulting in the microgels with a non-uniform distribution of cross-linking species. In particular, a series of microgels with (i) a highly cross-linked inner part of the shell and gradually decreased cross-linker concentration towards the periphery, (ii) microgels with loosely cross-linked inner and outer parts, as well as (iii) microgels with a more-or-less homogeneous structure, have been created and validated. Counterions and salt ions are taken into account explicitly, and electrostatic interactions are described by the Coulomb potential. FINDINGS: Our studies reveal a strong dependence of the microgel swelling response on the network topology. Simple redistribution of cross-links plays a significant role in the structure of the microgels, including cavity size, microgel size, fuzziness, and extension of the inner and outer parts of the microgels. Our results indicate the possibilities of qualitative justification of the structure of the hollow microgels in the experiments by measuring the relative change in the size of the sacrificial core to the size of the cavity and by estimation of a power law function, [Formula: see text] , of the hydrodynamic radius of the hollow microgels as a function of added salt concentration.

Interfacial Assembly of Anisotropic Core-Shell and Hollow Microgels.

Microgels, cross-linked polymers with submicrometer size, are ideal soft model systems. While spherical microgels have been studied extensively, anisotropic microgels have hardly been investigated. In this study, we compare the interfacial deformation and assembly of anisotropic core-shell and hollow microgels. The core-shell microgel consists of an elliptical core of hematite covered with a thin silica layer and a thin shell made of poly(N-isopropylacrylamide). The hollow microgels were obtained after a two-step etching procedure of the inorganic core. The behavior of these microgels at the oil-water interface was investigated in a Langmuir-Blodgett trough combined with ex situ atomic force microscopy. First, the influence of the architecture of anisotropic microgels on their spreading at the interface was investigated experimentally and by dissipative particle dynamic simulations. Hereby, the importance of the local shell thickness on the lateral and longitudinal interfacial deformation was highlighted as well as the differences between the core-shell and hollow architectures. The shape of the compression isotherms as well as the dimensions, ordering, and orientation of the microgels at the different compressions were analyzed. Due to their anisotropic shape and stiffness, both anisotropic microgels were found to exhibit significant capillary interactions with a preferential side-to-side assembly leading to stable microgel clusters at low interfacial coverage. Such capillary interactions were found to decrease in the case of the more deformable hollow anisotropic microgels. Consequently, anisotropic hollow microgels were found to distribute more evenly at high surface pressure compared to stiffer core-shell microgels. Our findings emphasize the complex interplay between the colloid design, anisotropy, and softness on the interfacial assembly and the opportunities it therefore offers to create more complex ordered interfaces.

Anisotropic Microgels Show Their Soft Side.

Anisotropic, submicrometer-sized particles are versatile systems providing interesting features in creating ordering in two-dimensional systems. Combining hard ellipsoids with a soft shell further enhances the opportunities to trigger and control order and alignment. In this work, we report rich 2D phase behavior and show how softness affects the ordering of anisotropic particles at fluid oil-water interfaces. Three different core-shell systems were synthesized such that they have the same elliptical hematite-silica core but differ with respect to thickness and stiffness of the soft microgel shell. Compression isotherms, the shape of individual core-shell microgels, and their 2D order at a decane-water interface are investigated by means of the Langmuir-Blodgett technique combined with ex-situ atomic force microscopy (AFM) imaging as well as dissipative particle dynamics (DPD) simulations. We show how the softness, size, and anisotropy of the microgel shell affect the side-to-side vs tip-to-tip ordering of anisotropic hybrid microgels as well as the alignment with respect to the direction of compression in the Langmuir trough. A large, soft microgel shell leads to an ordered structure with tip-to-tip alignment directed perpendicular to the direction of compression. In contrast, a thin and harder microgel shell leads to side-to-side ordering orientated parallel to the compression direction. In addition, the thin and harder microgel shell induces clustering of the microgels in the dilute state, indicating the presence of strong capillary interactions. Our findings highlight the relevance of softness for the complex ordering of anisotropic hybrid microgels at interfaces.

Controlling microgel deformation via deposition method and surface functionalization of solid supports.

Soft matter at solid-liquid interfaces plays an important role in multiple scientific disciplines as well as in various technological fields. For microgels, representing highly interesting soft matter systems, we demonstrate that the preparation method, i.e. the way how the microgel is applied to the specific surface, plays a key role. Focusing on the three most common sample preparation methods (spin-coating, drop-casting and adsorption from solution), we performed a comparative study of the deformation behavior of microgels at the solid-liquid interface on three different surfaces with varying hydrophilicities. For in situ visualization of the deformation of pNIPMAM microgels, we conducted highly sensitive 3D super resolution fluorescence microscopy methods. We furthermore performed complementary molecular dynamics simulations to determine the driving force responsible for the deformation depending on the surface and the deposition method. The combination of experiments and simulations revealed that the simulated equilibrium structure obtained after simulation of the completely dry microgel after deposition is retained after rehydration and subsequent fluorescent imaging.

Synthesis of Polyampholyte Janus-like Microgels by Coacervation of Reactive Precursors in Precipitation Polymerization.

Controlling the distribution of ionizable groups of opposite charge in microgels is an extremely challenging task, which could open new pathways to design a new generation of stimuli-responsive colloids. Herein, we report a straightforward approach for the synthesis of polyampholyte Janus-like microgels, where ionizable groups of opposite charge are located on different sides of the colloidal network. This synthesis approach is based on the controlled self-assembly of growing polyelectrolyte microgel precursors during the precipitation polymerization process. We confirmed the morphology of polyampholyte Janus-like microgels and demonstrate that they are capable of responding quickly to changes in both pH and temperature in aqueous solutions.

Deformation of Microgels at Solid-Liquid Interfaces Visualized in Three-Dimension.

Solid-liquid interfaces play an important role for functional devices. Hence, a detailed understanding of the interaction of soft matter objects with solid supports and of the often concomitant structural deformations is of great importance. We address this topic in a combined experimental and simulation approach. We investigated thermoresponsive poly(N-isopropylmethacrylamide) microgels (µGs) at different surfaces in an aqueous environment. As super-resolution fluorescence imaging method, three-dimensional direct stochastical optical reconstruction microscopy (dSTORM) allowed for visualizing µGs in their three-dimensional (3D) shape, for example, in a "fried-egg" conformation depending on the hydrophilicity of the surface (strength of adsorption). The 3D shape, as defined by point clouds obtained from single-molecule localizations, was analyzed. A new fitting algorithm yielded an isosurface of constant density which defines the deformation of µGs at the different surfaces. The presented methodology quantifies deformation of objects with fuzzy surfaces and allows for comparison of their structures, whereby it is completely independent from the data acquisition method. Finally, the experimental data are complemented with mesoscopic computer simulations in order to (i) rationalize the experimental results and (ii) to track the evolution of the shape with changing surface hydrophilicity; a good correlation of the shapes obtained experimentally and with computer simulations was found.

Distribution of Ionizable Groups in Polyampholyte Microgels Controls Interactions with Captured Proteins: From Blockade and "Levitation" to Accelerated Release.

A striking discovery in our work is that the distribution of ionizable groups in polyampholyte microgels (random and core-shell) controls the interactions with the captured proteins. Polyampholyte microgels are capable to switch reversibly their charges from positive to negative depending on pH. In this work, we synthesized differently structured polyampholyte microgels with controlled amounts and different distribution of acidic and basic moieties as colloidal carriers to study the loading and release of the model protein cytochrome c (cyt-c). Polyampholyte microgels were first loaded with cyt-c using the electrostatic attraction under pH 8 when the microgels were oppositely charged with respect to the protein. Then the protein release was investigated under different pH (3, 6, and 8) both with experimental methods and molecular dynamics simulations. For microgels with a random distribution of ionizable groups complete and accelerated (compared to polyelectrolyte counterpart) release of cyt-c was observed due to electrostatic repulsive interactions. For core-shell structured microgels with defined ionizable groups, it was possible to entrap the protein inside the neutral core through the formation of a positively charged shell, which acts as an electrostatic potential barrier. We postulate that this discovery allows the design of functional colloidal carriers with programmed release kinetics for applications in drug delivery, catalysis, and biomaterials.

An anionic shell shields a cationic core allowing for uptake and release of polyelectrolytes within core-shell responsive microgels.

To realize carriers for drug delivery, cationic containers are required for anionic guests. Nevertheless, the toxicity of cationic carriers limits their practical use. In this study, we investigate a model system of polyampholyte N-isopropylacrylamide (NIPAM)-based microgels with a cationic core and an anionic shell to study whether the presence of a negative shell allows the cationic core to be shielded while still enabling the uptake and release of the anionic guest polyelectrolytes. These microgels are loaded with polystyrene sulfonate of different molecular weights to investigate the influence of their chain length on the uptake and release process. By means of small-angle neutron scattering, we evaluate the spatial distribution of polystyrene sulfonate within the microgels. The guest molecules are located in different parts of the core-shell microgels depending on their size. By combining these scattering results with UV-vis spectroscopy, electrophoretic mobility and potentiometric titrations we gain complementary results to investigate the uptake and release process of polyelectrolytes in polyampholyte core-shell microgels. Moreover, Brownian molecular dynamic simulations are performed to compare the experimental and theoretical results of this model. Our findings demonstrate that the presence of a shell still enables efficient uptake of guest molecules into the cationic core. These anionic guest molecules can be released through an anionic shell. Furthermore, the presence of a shell enhances the stability of the microgel-polyelectrolyte complexes with respect to the cationic precursor microgel alone.

Amphiphilic Arborescent Copolymers and Microgels: From Unimolecular Micelles in a Selective Solvent to the Stable Monolayers of Variable Density and Nanostructure at a Liquid Interface.

Amphiphilic arborescent block copolymers of two generations (G2 and G3) and polymer microgels, obtained via cross-linking of diblock copolymers, were studied in a selective solvent and at liquid interface via dissipative particle dynamics (DPD) simulations. Depending on the primary structure, single arborescent macromolecules in selective solvent can have both core-corona and multicore structures. Self-assembly of the G2, G3, and microgels in the selective solvent is compared with equivalent linear diblock copolymers. The latter self-assemble into spherical micelles of large enough aggregation number. On the contrary, stability of unimolecular micelles is a feature of the arborescent copolymers and microgels, whereas their ability to aggregate is very low. Adsorption of the single molecules at liquid (oil-water) interface leads to their flattening and segregation of the amphiphilic blocks: hydrophilic and hydrophobic blocks are exposed toward water and oil, respectively. Depending on the character of interactions between monomer units, which can be controlled by temperature or solvent(s) quality, Janus, patchy, and nanosegregated structures can be formed within the macromolecules. Their self-assembly at the interface can lead to the formation of both loose and dense monolayers, which can be homogeneous and nanostructured. The pretty fast adsorption kinetics of G2 macromolecules make them efficient stabilizers of emulsions.

Multi-Shell Hollow Nanogels with Responsive Shell Permeability.

We report on hollow shell-shell nanogels with two polymer shells that have different volume phase transition temperatures. By means of small angle neutron scattering (SANS) employing contrast variation and molecular dynamics (MD) simulations we show that hollow shell-shell nanocontainers are ideal systems for controlled drug delivery: The temperature responsive swelling of the inner shell controls the uptake and release, while the thermoresponsive swelling of the outer shell controls the size of the void and the colloidal stability. At temperatures between 32 °C < T < 42 °C, the hollow nanocontainers provide a significant void, which is even larger than the initial core size of the template, and they possess a high colloidal stability due to the steric stabilization of the swollen outer shell. Computer simulations showed, that temperature induced switching of the permeability of the inner shell allows for the encapsulation in and release of molecules from the cavity.

Mixing of Two Immiscible Liquids within the Polymer Microgel Adsorbed at Their Interface.

We report on the behavior of two immiscible liquids within polymer microgel adsorbed at their interface. By means of dissipative particle dynamics (DPD) simulations and theoretical analysis in the framework of the Flory-Huggins (FH) lattice theory, we demonstrate that the microgel acts as a "compatibilizer" of these liquids: their miscibility within the microgel increases considerably. If the incompatibility of the liquids is moderate, although strong enough to induce phase separation in their 1:1 composition, they form homogeneous mixture in the microgel interior. The mixture of highly incompatible liquids undergoes separation into two (micro)phases within the microgel likewise out of it; however, the segregation regime is weaker and the concentration profiles are characterized by a weaker decay (gradient) in comparison with those of two pure liquids. The enhanced miscibility is a result of the screening of unfavorable interactions between unlike liquid molecules by polymer subchains. We have shown that better miscibility of the liquids is achieved with densely cross-linked microgels. Our findings are very perspective for many applications where immiscible species have to be mixed at interfaces (like in heterogeneous catalysis).

When Colloidal Particles Become Polymer Coils.

This work concerns interfacial adsorption and attachment of swollen microgel with low- to medium-level cross-linking density. Compared to colloids that form a second, dispersed phase, the suspended swollen microgel particles are ultrahigh molecular weight molecules, which are dissolved like a linear polymer, so that solvent and solute constitute only one phase. In contrast to recent literature in which microgels are treated as particles with a distinct surface, we consider solvent-solute interaction as well as interfacial adsorption based on the chain segments that can form trains of adsorbed segments and loops protruding from the surface into the solvent. We point out experimental results that support this discrimination between particles and microgels. The time needed for swollen microgels to adsorb at the air/water interface can be 3 orders of magnitude shorter than that for dispersed particles and decreases with decreasing cross-linking density. Detailed analysis of the microgels deformation, in the dry state, at a solid surface enabled discrimination particle like microgel in which case spreading was controlled predominantly by the elasticity and molecule like adsorption characterized by a significant overstreching, ultimately leading to chain scission of microgel strands. Dissipative particle dynamics simulations confirms the experimental findings on the interfacial activity and spreading of microgel at liquid/air interface.

Hollow and Core-Shell Microgels at Oil-Water Interfaces: Spreading of Soft Particles Reduces the Compressibility of the Monolayer.

We investigate the influence of a solid core and of the cross-link density on the compression of microgel particles at oil-water interfaces by means of compression isotherms and computer simulations. We investigate particles with different morphology, namely core-shell particles containing a solid silica core surrounded by a cross-linked polymer shell of poly(N-isopropylacrylamide), and the corresponding hollow microgels where the core was dissolved. The polymer shell contains different amounts of cross-linker. The compression isotherms show that the removal of the core leads to an increase of the surface pressure at low compression, and the same effect can be observed when the polymer cross-link density is decreased. Low cross-link density and a missing core thus facilitate spreading of the polymer chains at the interface and, at high compression, hinder the transition to close hexagonal packing. Furthermore, the compression modulus only depends on the cross-link density at low compression, and no difference can be observed between the core-shell particles and the corresponding hollow microgels. It is especially remarkable that a low cross-link density leads to a high compression modulus at low compression, while this behavior is reversed at high compression. Thus, the core does not influence the particle behavior until the polymer shell is highly compressed and the core is directly exposed to the pressure. This is related to an enhanced spreading of polymer chains at the interface and thus high adsorption energy. These conclusions are fully supported by computer simulations which show that the cross-link density of the polymer shell defines the degree of deformation at the interface. Additionally, the core restricts the spreading of polymer chains at the interface. These results illustrate the special behavior of soft microgels at liquid interfaces.

Communication: Intraparticle segregation of structurally homogeneous polyelectrolyte microgels caused by long-range Coulomb repulsion.

Structurally homogeneous polyelectrolyte microgels in dilute aqueous solutions are shown to exhibit inhomogeneous density profile including intraparticle "phase" coexistence of hollow core and dense "skin." This effect is a consequence of long-range Coulomb repulsion of charged groups which appear because of entropy-driven escape of monovalent counterions into the outer solvent. Excess of the charged groups at the periphery of the microgel particle reduces electrostatic energy and overall free energy of the system despite a penalty in the elastic free energy of strongly stretched subchains in the hole. This finding can serve as additional tool controlling encapsulation, transport, and release of high- and low-molecular-weight species in processes where the microgels are used as delivery systems.

Morphology-Controlled Kinetics of Solvent Uptake by Block Copolymer Films in Nonselective Solvent Vapors.

We compare the swelling behavior of a compositionally symmetric diblock copolymer in films with nonbulk micellar morphology and with vertically oriented lamellae. The morphologies preformed by spin-coating from selective/nonselective solvents differ in shape and total area of the AB interfaces between incompatible units. Experimental measurements and dissipative particle dynamics (DPD) simulations demonstrate that AB interfaces dominate as the diffusion pathways of nonselective solvent molecules in strongly segregated films. In experiments, the lamellar films swell about 20× faster as compared to densely packed micellar structures, while the degrees of swelling at saturation are equal for the two types of morphologies. The difference in the kinetics of solvent uptake vanishes as soon as the solvent plasticizing effect allows for micelles-to-lamellae transition. DPD simulations confirm the inhomogeneous distribution of the solvent inside the film, with the higher fraction of the solvent localized at the AB interface and reveal morphology-dependent kinetics of the solvent uptake. The effect of dissimilar abilities of the nanodomains and of AB interface to serve as diffusion pathways for small molecules may find potential in designing nanosensors and heterogeneous barrier layers.