BMP2 rs1005464 is associated with mandibular condyle size variation.

This study aimed to evaluate the association between single nucleotide polymorphisms (SNPs) in endochondral development-related genes and mandibular condyle shape, size, volume, and symmetry traits. Cone-beam Computed Tomographies and genomic DNA from 118 individuals were evaluated (age range: 15-66 years). Data from twelve 3D landmarks on mandibular condyles were submitted to morphometric analyses including Procrustes fit, principal component analysis, and estimation of centroid sizes and fluctuating asymmetry scores. Condylar volumes were additionally measured. Seven SNPs across BMP2, BMP4, RUNX2 and SMAD6 were genotyped. Linear models were fit to evaluate the effect of the SNPs on the mandibular condyles' quantitative traits. Only the association between BMP2 rs1005464 and centroid size remained significant after adjusting to account for the false discovery rate due to multiple testing. Individuals carrying at least one A allele for this SNP showed larger condylar size than common homozygotes GG (ß = 0.043; 95% CI: 0.014-0.071; P value = 0.028). The model including BMP2 rs1005464, age and sex of the participants explained 17% of the variation in condylar size. Shape, volume, and symmetry were not associated with the evaluated SNPs. These results suggest that BMP2 rs1005464 might be associated with variation in the mandibular condyles size.

Oral health-related quality of life, adaptation/discomfort during open bite treatment with spurs: complementary analysis from a randomized clinical trial.

This single-center trial aimed to longitudinally compare the oral health-related quality of life (OHRQOL), adaptation and discomfort during anterior open bite (AOB) treatment with lingual spurs and build-ups (SBU) versus spurs only (S) approaches. Children (7-11 years) with AOB were randomly allocated into two treatment groups (SBU or S). The Child Perception Questionnaire (CPQ8-10) was applied 1 and 12 months after installation of the appliances. Questionnaires evaluating functional adaptation and discomfort during the first month of treatment were also applied. A visual analog scale (VAS) was used in these questionnaires. Generalized mixed models were used for analyzing OHRQOL and discomfort data. Generalized linear models were used to assess adaptation outcomes (α = 0.05). The SBU group included 24 patients (7 males and 17 females; mean age 8.2 years) and the S group included 25 patients (11 males and 14 females; mean age 8.3 years). Regardless of the treatment type, overall OHRQOL scores at 12 months were 0.69 times those recorded at 1 month after the appliances installation (i.e., ~ 31% reduction; exp (ß) = 0.69; 95% CI: 0.55, 0.88). A significant interaction between treatment and time was detected for the 'functional limitations' domain. For this domain, a significant improvement from the first to the twelfth month was observed in the S group (P < 0.001). Patients in both treatment groups showed similar and easy adaptation to the appliances. Independent of the type of treatment, tongue-related discomfort decreased over time. One week and one month after the appliance's delivery, the discomfort scores were 0.19 (i.e., ~ 81% reduction; exp (ß) = 0.19; 95% CI: 0.13, 0.28; P < 0.001) and 0.02 (i.e., ~ 98% reduction; exp (ß) = 0.02; 95% CI: 0.01, 0.07; P < 0.001) times, respectively, those issued immediately after the installation of the appliances. Regardless of treatment type; overall OHRQOL improved from the first to the twelfth month of AOB treatment. The functional limitations score decreased in the S group. Children showed easy adaptation, and their discomfort decreased 1 week after the installation of the appliances.Trial registration: Clinicaltrials.gov; NCT03702881, date of registration: October 11, 2018.

Automated artificial intelligence-based three-dimensional comparison of orthodontic treatment outcomes with and without piezocision surgery.

OBJECTIVE(S): This study aims to evaluate the influence of the piezocision surgery in the orthodontic biomechanics, as well as in the magnitude and direction of tooth movement in the mandibular arch using novel artificial intelligence (AI)-automated tools. MATERIALS AND METHODS: Nineteen patients, who had piezocision performed in the lower arch at the beginning of treatment with the goal of accelerating tooth movement, were compared to 19 patients who did not receive piezocision. Cone beam computed tomography (CBCT) and intraoral scans (IOS) were acquired before and after orthodontic treatment. AI-automated dental tools were used to segment and locate landmarks in dental crowns from IOS and root canals from CBCT scans to quantify 3D tooth movement. Differences in mesial-distal, buccolingual, intrusion and extrusion linear movements, as well as tooth long axis angulation and rotation were compared. RESULTS: The treatment time for the control and experimental groups were 13.2 ± 5.06 and 13 ± 5.52 months respectively (P = .176). Overall, anterior and posterior tooth movement presented similar 3D linear and angular changes in the groups. The piezocision group demonstrated greater (P = .01) mesial long axis angulation of lower right first premolar (4.4 ± 6°) compared with control group (0.02 ± 4.9°), while the mesial rotation was significantly smaller (P = .008) in the experimental group (0.5 ± 7.8°) than in the control (8.5 ± 9.8°) considering the same tooth. CONCLUSION: The open source-automated dental tools facilitated the clinicians' assessment of piezocision treatment outcomes. The piezocision surgery prior to the orthodontic treatment did not decrease the treatment time and did not influence in the orthodontic biomechanics, leading to similar tooth movements compared to conventional treatment.

Asymmetry in Class II subdivision malocclusion: Assessment based on 3D surface models.

INTRODUCTION: There is currently no consensus in the literature whether the aetiology of a Class II subdivision is dental, skeletal or both. The aim of this study was to identify and quantify skeletal and dental asymmetries in Class II subdivision malocclusions. METHODS: CBCTs from 33 Class II subdivision malocclusion patients were used to construct 3D volumetric label maps. Eighteen landmarks were identified. The original scan and associated 3D volumetric label map were mirrored. Registration of the original and mirrored images relative to the anterior cranial base, maxilla and mandible were performed. Surface models were generated, and 3D differences were quantified. Statistical analysis was performed. RESULTS: Anterior cranial base registration showed significant differences for fossa vertical difference, fossa roll, mandibular yaw, mandibular lateral displacement and lower midline displacement. Regional registrations showed significant differences for antero-posterior (A-P) mandibular length, maxillary roll, A-P maxillary first molar position, maxillary first molar yaw and maxillary first molar roll. Class II subdivision patients also show an asymmetric mandibular length as well as an asymmetric gonial angle. Moderate correlations were found between the A-P molar relationship and fossa A-P difference, mandibular first molar A-P difference, maxillary first molar A-P difference and maxillary first molar yaw. CONCLUSIONS: This study suggests that Class II subdivisions can result from both significant skeletal and dental factors. Skeletal factors include a shorter mandible as well as posterior and higher displacement of the fossa on the Class II side, resulting in mandibular yaw. Dental factors include maxillary and mandibular first molar antero-posterior asymmetry.

Clear aligner mandibular advancement in growing patients with Class II malocclusion.

Treatment effects occurring during Class II malocclusion treatment with the clear aligner mandibular advancement protocol were evaluated in two growing patients: one male (12 years, 3 months) and one female (11 years, 9 months). Both patients presented with full cusp Class II molar and canine relationships. Intraoral scans and cone-beam computed tomography were acquired before treatment and after mandibular advancement. Three-dimensional skeletal and dental long-axis changes were quantified, in which the dental long axis was determined by registering the dental crowns obtained from intraoral scans to the root canals in cone-beam computed tomography scans obtained at the same time points. Class II correction was achieved by a combination of mandibular skeletal and dental changes. A similar direction of skeletal and dental changes was observed in both patients, with downward and forward displacement of the mandible resulting from the growth of the mandibular condyle and ramus. Dental changes in both patients included mesialization of the mandibular posterior teeth with flaring of mandibular anterior teeth. In these two patients, clear aligner mandibular advancement was an effective treatment modality for Class II malocclusion correction with skeletal and dental effects and facial profile improvement.

3D analysis of maxillomandibular morphology in hyperdivergent and hypodivergent individuals: A cross-sectional study.

INTRODUCTION: The aim of this cross-sectional study was to investigate maxillomandibular morphology in hyperdivergent and hypodivergent individuals, using 3D surface models generated by cone-beam computed tomography (CBCT). METHODS: The sample consisted of 60 CBCTs (30 males, 30 females) patients aged 12-30 years, divided into two groups comprising hyperdivergent (≥35°) and hypodivergent (≤30°) individuals, according to the mandibular plane (MP) angle. Multiplanar reconstructions were used to mark the landmarks, and 3D surface models were created to evaluate structures of the maxillomandibular complex, including condyle, ramus, symphysis and palatal height. Intergroup comparisons were performed by independent t-test. Pearson's correlation test was used (P < .05) to evaluate the correlation of the MP angle with the angles and linear measurements of other structures. RESULTS: Significant differences were found between the groups regarding condylar width, ramus height, condylar plus ramus height, mandibular length, gonial angle, palatal plane angle and palatal-mandibular angle. No differences (P > .05) were found for the condylar height, symphysis inclination angle or palatal height. Correlations (P < .05) were found between the MP angle and structures of the maxillomandibular complex. CONCLUSIONS: Hyperdivergent (MP ≥ 35°) and hypodivergent (MP ≤ 30°) individuals present different skeletal morphology regarding condylar width, ramus height, condylar plus ramus height, mandibular length, gonial angle, palatal plane angle and palatal-mandibular angle. There is a significant correlation between MP angle and morphological structures such as condyle, ramus, symphysis, palatal plane angle and palatal-mandibular angle.

Three-dimensional changes after maxillary molar distalization with a miniscrew-anchored cantilever.

OBJECTIVES: To evaluate the changes after maxillary molar distalization in Class II malocclusion using the miniscrew-anchored cantilever with an extension arm. MATERIALS AND METHODS: The sample included 20 patients (9 male, 11 female; mean age 13.21 ± 1.54 years) with Class II malocclusion, treated with the miniscrew-anchored cantilever. Lateral cephalograms and dental models obtained before (T1) and after molar distalization (T2) were evaluated using Dolphin software and 3D Slicer. Superimposition of digital dental models using regions of interest on the palate was performed to evaluate three-dimensional displacement of maxillary teeth. Intragroup change comparisons were performed using dependent t-test and Wilcoxon test (P < 0.05). RESULTS: The maxillary first molars were distalized to overcorrected Class I. The mean distalization time was 0.43 ± 0.13 years. Cephalometric analysis demonstrated significant distal movement of the maxillary first premolar (-1.21 mm, 95% confidence interval [CI]: -0.45, -1.96) and maxillary first (-3.38 mm, 95% CI: -2.88, -3.87) and second molars (-2.12 mm, 95% CI: -1.53, -2.71). Distal movements increased progressively from the incisors to the molars. The first molar showed small intrusion (-0.72 mm, 95% CI: 0.49, -1.34). In the digital model analysis, the first and second molars showed a crown distal rotation of 19.31° ± 5.71° and 10.17° ± 3.84°, respectively. The increase in maxillary intermolar distance, evaluated at the mesiobuccal cusps, was 2.63 ± 1.56 mm. CONCLUSIONS: The miniscrew-anchored cantilever was effective for maxillary molar distalization. Sagittal, lateral, and vertical movements were observed for all maxillary teeth. Distal movement was progressively greater from anterior to posterior teeth.

Three-dimensional decision support system for treatment of canine impaction.

INTRODUCTION: This study aimed to develop a 3-dimensional (3D) characterization of the severity of maxillary impacted canines and to test the clinical performance of this characterization as a treatment decision support tool. METHODS: Cone-beam computed tomography images obtained from 83 patients with 120 impacted maxillary canines were included. Quantitative information on the canine 3D position and qualitative assessment of root damage of adjacent teeth were evaluated. A severity index was constructed on the basis of the quantitative findings. Clinical applicability was tested by comparing clinical diagnosis and treatment planning for conventional records vs the 3D characterization via a 2-part survey. RESULTS: The average quantitative assessments of impacted maxillary canine position were 6.4 ± 3.6 mm from the midsagittal plane, 11.6 ± 3.1 mm in height relative to the occlusal plane, 31.5° ± 18° of roll, and 48.8° ± 14.3° of pitch. The severity index ranged from 0-13 with a mean score of 4.5 ± 2.2. Overlap with adjacent teeth was the greatest contributor (33%) to the index. Bicortically impacted canines caused the most severe root damage. Cone-beam computed tomography was preferred for assessing root damage and overall severity, whereas conventional imaging was sufficient for height and angulation assessment. The 3D report was very important or important for evaluating root damage, canine position, overall severity, and overlap. The 3D report changed most of the decisions relating to biomechanics, patient education, and treatment time estimate. The decision of exposure and traction vs extraction was changed 22% of the time after the presentation of the 3D report. CONCLUSIONS: The overlap with adjacent teeth frequently contributes the most to the severity index. The 3D report provided relevant clinical information regarding the canine position, damage to adjacent teeth, and the severity index, with a profound impact on the decisions of the clinicians regarding biomechanics, patient education, and treatment time estimate.

Effect of an aqueous 4% titanium tetrafluoride solution on preventing caries in orthodontic patients: a controlled clinical trial.

INTRODUCTION: Titanium tetrafluoride (TiF4) is a fluoride compound that, when is applied over enamel, promotes a protection against demineralization through a titanium dioxide (TiO2) acid-resistant coat. OBJECTIVES: This study sought to verify the hypothesis that a single application of 4% TiF4 increases the resistance of enamel to dental demineralization in orthodontic patients. MATERIALS AND METHODS: This controlled clinical trial followed CONSORT guidelines and investigated the prevention of enamel demineralization, fluoride retention, and the presence of a Ti layer after TiF4 application on banded teeth exposed to clinical cariogenic biofilm. Forty premolars were divided into a control group (CG; n = 20) and a test group (TG; n = 20). Teeth from both groups received prophylaxis and orthodontic bands with a cariogenic locus. In the TG, all teeth additionally underwent aqueous 4% TiF4 solution application after prophylaxis before being banded. After one month, teeth from both groups were extracted and prepared to assess the microhardness, fluoride retention, and evaluation of the Ti coating over the enamel surface. All data were analyzed with a paired Student's t-test (p<0.05). RESULTS: Enamel microhardness and fluoride uptake were higher in TG than in CG, while the Ti layer could be seen over TG teeth that received TiF4 application. CONCLUSION: Under clinical circumstances, the 4% aqueous TiF4 solution was effective in preventing enamel mineral loss through increasing the enamel resistance to dental demineralization, enhancing its microhardness and fluoride uptake, and forming a Ti coat.

Cone-beam computed tomography study of mandibular morphology and tooth compensation in asymmetrical patients.

INTRODUCTION: This study evaluated mandibular morphology and transverse dental compensation between symmetrical and asymmetrical subjects, allocated according to sagittal skeletal patterns. In addition, the hypothesis that mandibular morphology and dental compensations differed between symmetrical/asymmetrical groups and also among the different types of sagittal skeletal patterns was tested. METHODS: Cone-beam computed tomography images of 96 patients were included in this study and were divided into 2 groups according to the degree of menton deviation: a symmetrical group with deviation up to 2.0 mm (n = 48; mean age, 15 ± 6 years), and an asymmetrical group with deviation from 3.5 mm (n = 48; mean age, 16 ± 8 years). The 2 groups were divided in accordance with the ANB angle: Class I, II, and III. Skeletal and dental measurements were performed. Intergroup and intragroup analyses were carried out, using a 2-way analysis of variance to assess the interaction of factors: symmetry and sagittal skeletal pattern; and the Student t test for differences between deviated (Dv) and nondeviated (NDv) sides. RESULTS: Symmetrical/asymmetrical groups and Class I, II, and III groups were similar in relation to demographic aspects (P = 0.412 and P = 0.357 for sex and age, respectively). Asymmetrical patients had higher values for body length and mandibular ramus and condyle height on the NDv side (P = 0.011, P = 0.024, and P = 0.001, respectively). When comparing the different skeletal patterns, patients with a Class III relationship demonstrated higher values for mandibular ramus height. Intergroup analysis showed no differences in dental parameters. In the comparison between the sides, the asymmetrical group showed a significant difference in canine inclination (P = 0.008), mandibular ramus height (P = 0.004), condyle height (P = 0.010) and gonion to midsagittal plane distance (P = 0.018). CONCLUSIONS: Asymmetrical subjects showed higher values for canine inclination and mandibular body, ramus and condylar height on the NDv side. The hypothesis was partially confirmed that mandibular morphology and dental compensations are different between symmetrical/asymmetrical groups and among different sagittal skeletal patterns.

Effect of an aqueous 4% titanium tetrafluoride solution on preventing caries in orthodontic patients: a controlled clinical trial

ABSTRACT Introduction: Titanium tetrafluoride (TiF4) is a fluoride compound that, when is applied over enamel, promotes a protection against demineralization through a titanium dioxide (TiO2) acid-resistant coat. Objectives: This study sought to verify the hypothesis that a single application of 4% TiF4 increases the resistance of enamel to dental demineralization in orthodontic patients. Materials and Methods: This controlled clinical trial followed CONSORT guidelines and investigated the prevention of enamel demineralization, fluoride retention, and the presence of a Ti layer after TiF4 application on banded teeth exposed to clinical cariogenic biofilm. Forty premolars were divided into a control group (CG; n = 20) and a test group (TG; n = 20). Teeth from both groups received prophylaxis and orthodontic bands with a cariogenic locus. In the TG, all teeth additionally underwent aqueous 4% TiF4 solution application after prophylaxis before being banded. After one month, teeth from both groups were extracted and prepared to assess the microhardness, fluoride retention, and evaluation of the Ti coating over the enamel surface. All data were analyzed with a paired Student's t-test (p<0.05). Results: Enamel microhardness and fluoride uptake were higher in TG than in CG, while the Ti layer could be seen over TG teeth that received TiF4 application. Conclusion: Under clinical circumstances, the 4% aqueous TiF4 solution was effective in preventing enamel mineral loss through increasing the enamel resistance to dental demineralization, enhancing its microhardness and fluoride uptake, and forming a Ti coat.

RESUMO Introdução: O tetrafluoreto de titânio (TiF4) é um composto fluoretado que, quando aplicado sobre o esmalte dentário, promove uma proteção contra desmineralização, por meio da formação de uma camada ácido-resistente de dióxido de titânio (TiO2). Objetivos: O presente estudo buscou verificar a hipótese de que uma única aplicação de TiF4 a 4% aumenta a resistência do esmalte dentário à desmineralização, em pacientes ortodônticos. Material e Métodos: Esse ensaio clínico controlado seguiu as diretrizes do CONSORT e investigou a prevenção da desmineralização do esmalte, retenção de flúor e a presença de uma camada de titânio após a aplicação do TiF4 em dentes bandados expostos ao biofilme cariogênico clínico. Quarenta pré-molares foram divididos em dois grupos: controle (GC; n = 20) e teste (GT; n = 20). Dentes de ambos os grupos receberam profilaxia e bandas ortodônticas com nicho cariogênico. No GT, todos os dentes também foram submetidos a aplicação de solução aquosa de TiF4 4 após profilaxia, antes de serem bandados. Após um mês, os dentes de ambos os grupos foram extraídos e preparados para avaliar a microdureza, retenção de flúor e avaliação da camada de titânio sobre a superfície do esmalte. Todos os dados foram analisados pelo teste t pareado (p<0,05). Resultados: A microdureza do esmalte e a absorção de flúor foram mais elevadas no GT do que no GC, enquanto uma camada de titânio pôde ser observada sobre os dentes do GT, que receberam aplicação TiF4. Conclusão: Em circunstâncias clínicas, a solução de TiF4 a 4% foi eficaz na prevenção da perda mineral do esmalte, por meio do aumento da resistência à desmineralização dentária, aumentando sua microdureza e absorção de flúor, e formando uma camada protetora de titânio.

Presurgical orthodontic decompensation with clear aligners.

INTRODUCTION: Orthodontists, surgeons, and patients have taken an interest in using clear aligners in combination with orthognathic surgery. This study aimed to evaluate the accuracy of tooth movements with clear aligners during presurgical orthodontics using novel 3-dimensional superimposition techniques. METHODS: The study sample consisted of 20 patients who have completed presurgical orthodontics using Invisalign clear aligners. Initial (pretreatment) digital dental models, presurgical digital dental models, and ClinCheck prediction models were obtained. Presurgical models were superimposed onto initial ones using stable anatomic landmarks; ClinCheck models were superimposed onto presurgical models using surface best-fit superimposition. Five hundred forty-five teeth were measured for 3 angular movements (buccolingual torque, mesiodistal tip, and rotation) and 4 linear movements (buccolingual, mesiodistal, vertical, and total scalar displacement). The predicted tooth movement was compared with the achieved amount for each movement and tooth, using both percentage accuracy and numerical difference. RESULTS: Average percentage accuracy (63.4% ± 11.5%) was higher than in previously reported literature. The most accurate tooth movements were buccal torque and mesial displacement compared with lingual torque and distal displacement, particularly for mandibular posterior teeth. Clinically significant inaccuracies were found for the buccal displacement of maxillary second molars, lingual displacement of all molars, intrusion of mandibular second molars, the distal tip of molars, second premolars, and mandibular first premolars, buccal torque of maxillary central and lateral incisors, and lingual torque of premolars and molars. CONCLUSIONS: Superimposition techniques used in this study lay the groundwork for future studies to analyze advanced clear aligner patients. Invisalign is a treatment modality that can be considered for presurgical orthodontics-tooth movements involved in arch leveling and decompensation are highly accurate when comparing the simulated and the clinically achieved movements.

Influence of nasal septum deviation on fluctuating asymmetries of the nasomaxillary complex: A cross-sectional study.

An important parameter in diagnostic analysis and treatment planning of different biological areas is facial symmetry, and several etiological factors have been attributed to skeletal facial asymmetry. Although causality cannot be determined, previous studies have reported a relationship between the anatomical deviation of the nasal septum and facial development. Diagnosis is critical for patients in growth stages due to the association between nasal septum deviation (NSD) and abnormal growth of the nasomaxillary complex. To understand this relationship, this study aimed to investigate the influence of nasal septum deviation on fluctuating asymmetries (FA) of the nasomaxillary complex at different stages of skeletal maturation. Another goal was to determine whether an association exists between the degrees of septal deviation severity and asymmetry of the nasomaxillary complex. This was a retrospective, cross-sectional observational study comprising 60 selected cone-beam computed tomography (CBCT) scans that were divided into four groups (n = 15) according to the degree of septal deviation and skeletal maturation: mild deviation (MD; <10°), moderate to severe deviation (MSD; ≥10°), early group (EG), and late group (LG). The angle and area of deviation were measured for the greatest NSD, and a geometric morphometric approach was used to evaluate the nasal septum (NS) shape. The morphology of the nasomaxillary complex and the presence of fluctuating asymmetries were evaluated using 23 two-dimensional landmarks on the nasomaxillary complex (nasal, lateral, and palatal regions) with Procrustes ANOVA and Mann-Whitney test. Additionally, Spearman's correlation and multivariate regression were used to correlate the NSD with asymmetries in these regions. No significant differences were observed in the Procrustes FA scores of the nasomaxillary complex between the MD-EG × MSD-EG and MD-LG × MSD-LG (p > 0.05). However, the results of the multivariate regression revealed more specific aspects of asymmetry (asymmetry component), there was a positive correlation between the NSD angle and the palatal regions (p = 0.035 and p = 0.047, middle and posterior, respectively), and the nasal septum shape and anterior palatal regions (p = 0.039). The nasal and lateral regions did not correlate with the NSD angle in the multivariate regression analysis (p > 0.05). The results of this study indicate that there were no significant differences in the fluctuating asymmetry of the nasomaxillary complex between the mild and moderate to severe nasal septum deviation groups, in both early and late skeletal maturation stages. However, a positive correlation was observed in the degree of nasal septum deviation angle and asymmetry components of the middle and posterior palatal regions, likewise between the nasal septum shape and asymmetry components of the anterior palatal region. The diagnosis of nasal septum deviation by both physicians and dentists is important, as a relationship was observed with fluctuating asymmetry component of the palatal region. This information can guide the decision of the treatment planning for these individuals, and should be considered, especially in cases of severe septum deviation, due to the great anatomical proximity of these structures.

Three-dimensional cone-beam computed technology evaluation of skeletal and dental changes in growing patients with Class II malocclusion treated with the cervical pull face-bow headgear appliance.

INTRODUCTION: This study aimed to 3-dimensionally quantify and compare the outcomes of growing patients with Class II malocclusion treated with the cervical pull face-bow headgear appliance in combination with full fixed orthodontic appliances. METHODS: The study sample consisted of 22 patients with Class II malocclusion with the following inclusion criteria: ANB >4.75°, Class II molar relationship, and SN-GoGn <37°. The mean age of patients was 12.5 ± 1.1 years at baseline. The average treatment time was 27.7 ± 7.3 months. Cone-beam computed tomography scans were superimposed in the cranial base, maxillary regional, and mandibular regional to evaluate growth, treatment displacements, and bone remodeling. RESULTS: Relevant statistically and clinically significant skeletal changes included average decreases in ANB (2.1 ± 1.1°) and SNA (1.8 ± 1.1°); posterior (1.3 ± 1.4 mm) and inferior (4.6 ± 2.2 mm) displacement of A-point; inferior displacements of B-point (5.4 ± 2.8 mm) and Pogonion (5.8 ± 2.6 mm); superior displacement of Condylion (6.9 ± 2.4 mm); increase in mandibular length (5.4 ± 2.0 mm); and clockwise rotation of palatal plane (1.9 ± 1.9°). Significant proclination of the maxillary incisors (9.8 ± 11.1°) and nonsignificant proclination of the mandibular incisors (4.7 ± 9.6°) were also noted. CONCLUSIONS: Class II skeletal correction was primarily achieved by posterior, inferior displacement of the sagittal position of the maxilla. Change in the sagittal position of the mandible/chin (B-point, Pogonion) was not significant; rather, mandibular displacement was significant in an inferior vertical direction without backward rotation, as seen from marked condylar and ramus growth.

Three-dimensional dentoalveolar changes in open bite treatment in mixed dentition, spurs/posterior build-ups versus spurs alone: 1-year follow-up randomized clinical trial.

This randomized clinical trial aimed to compare the three-dimensional dentoalveolar maxillary changes after anterior open bite treatment with bonded spurs and build-ups versus bonded spurs alone. Patients from 7 to 11 years of age with anterior open bite were randomly allocated into two groups. Bonded spurs and posterior build-ups were used in the experimental group and only bonded spurs were used in the comparison group. The randomization sequence was generated at www.randomization.com . Opaque, sealed and sequentially numbered envelopes were part of the allocation concealment. Digital dental models were acquired before (T1) and after 12 months of treatment (T2) and de-identified for analysis purposes. Three-dimensional changes of maxillary permanent incisors and first molars were evaluated by means of T1 and T2 dental model superimposition. Landmark-based registration on the posterior teeth and registration on the palate using regions of interest were performed. T or Mann-Whitney U tests were used for intergroup comparisons (P < 0.05). Mean difference (MD) and 95% confidence interval (CI) were calculated. Twenty-four children (17 girls and 7 boys) were included in the experimental group (mean age 8.22 ± 1.06 years) and 25 children (14 girls and 11 boys) were included in the comparison group (mean age 8.30 ± 0.99 years). After 12 months of treatment, inferior displacements of maxillary incisors were similar in the experimental (1.55-2.92 mm) and comparison (1.40-2.65 mm) groups. Inferior displacement of the maxillary molars was also similar in both groups (MD: - 0.13 mm; 95% CI - 0.38, 0.12). The experimental and comparison groups showed medial and lateral displacements of the permanent first molars, respectively (MD, - 0.31 mm; 95% CI - 0.51, - 0.11). Lingual inclination of the permanent first molars were observed in the experimental group and buccal inclination in the comparison group (MD, - 2.16°; 95% CI - 3.72, - 0.60). Similar three-dimensional displacements of maxillary central and lateral incisors, and inferior displacements of maxillary permanent first molars were observed in both groups. Bonded spurs associated with posterior build-ups demonstrated some medial displacement and lingual inclination of the maxillary permanent first molars while opposite changes were noticed in the comparison group.Trial registration: Clinicaltrials.gov; NCT03702881, date of registration: October 11, 2018.

Prevalence of mandibular asymmetry in different skeletal sagittal patterns.

OBJECTIVES: To analyze the prevalence of mandibular asymmetry in skeletal sagittal malocclusions. MATERIALS AND METHODS: PubMed/MEDLINE, EMBASE, LILACS, Web of Science, Scopus, LIVIVO and gray literature (OpenGrey, ProQuest, and Google Scholar) were electronically searched. Two independent investigators selected the eligible studies, and assessed risk of bias and certainty of evidence (GRADE). One reviewer independently extracted the data and the second reviewer checked this information. Any disagreement between the reviewers in each phase was resolved by discussion between them and/or involved a third reviewer for final decision. RESULTS: Electronic search identified 5,132 studies, and 5 observational studies were included. Risk of bias was low in two studies, moderate in one, and high in two. The studies showed high heterogeneity. Mandibular asymmetry ranged from 17.43% to 72.95% in overall samples. Horizontal chin deviation showed a prevalence of 17.66% to 55.6% asymmetry in Class I malocclusions, and 68.98% in vertical asymmetry index. In Class II patients, prevalence of mandibular asymmetry varied from 10% to 25.5% in horizontal chin deviation, and 71.7% in vertical asymmetry index. The Class III sample showed a prevalence of mandibular asymmetry ranging from 22.93% to 78% in horizontal chin deviation and 80.4% in vertical asymmetry index. Patients seeking orthodontic or orthognathic surgery treatment showed greater prevalence of mandibular asymmetry. CONCLUSIONS: Skeletal Class III malocclusion showed the greatest prevalence of mandibular asymmetry. Mandibular vertical asymmetry showed a marked prevalence in all malocclusions. However, conclusions should be interpreted with caution due to use of convenience samples and low-quality study outcomes.

Dental long axes using digital dental models compared to cone-beam computed tomography.

OBJECTIVE: Standard methods of evaluating tooth long axes are not comparable (digital dental models [DDMs], panoramic and cephalometric radiographs) or expose patients to more radiation (cone-beam computed tomography [CBCT]). This study aimed to compare angular changes in tooth long axes using DDMs vs using CBCTs. SETTINGS AND SAMPLE POPULATION: Secondary data analysis of DDMs and CBCTs, taken before and after orthodontic treatment with piezocision of 24 patients. METHODS: Angular changes in tooth long axes were evaluated using landmarks on first molars (centre of the occlusal surface and centre of the furcation), canines and incisors (cusp tip and centre of the root at the cementoenamel junction). Wilcoxon test, intraclass correlation coefficient (ICC) and Bland-Altman plots were used to test intra- and inter-rater agreement and compare DDM and CBCT measurements. RESULTS: The mesiodistal angulation and buccolingual inclination DDM measurements were reproducible. Overall mean differences between DDM and CBCT measurements of mesiodistal angulation, 1.9°±1.5°, and buccolingual inclination, 2.2 ± 2.2°, were not significant for all teeth. ICC between DDM and CBCT measurements ranged from good (0.85 molars) to excellent (0.94 canines; 0.96 incisors). The percentages of measurements outside the range of ±5 were 17.4% for molars, 13.8% for canines and 4.5% for incisors. CONCLUSIONS: DDM assessment of changes in tooth long axes has good reproducibility and yields comparable measurements to those obtained from CBCT within a 5° range. These findings lay the groundwork for machine learning approaches that synthesize crown and root canal information towards planning tooth movement without the need for ionizing radiation scans.

Comparison and reproducibility of three methods for maxillary digital dental model registration in open bite patients.

OBJECTIVE: To compare and assess the reproducibility of 3 methods for registration of maxillary digital dental models in patients with anterior open bite. Settings and sample population Digital dental models of 16 children with an anterior open bite in the mixed dentition were obtained before (T1) and after 12 months of treatment with bonded spurs (T2). METHODS: Landmarks were placed on all T2 models and 3 registration methods (R1, R2 and R3) were independently performed by 2 observers. R1 was based on 10 landmarks placed on posterior teeth. R2 was based on 5 landmarks on the palate (2 anterior, 2 posterior and 1 central). R3 used regions of interest around the 5 palatal landmarks used in R2. The differences between the registration methods were calculated by comparing the mean differences and standard deviations between the corresponding x, y and z coordinates of 6 corresponding landmarks in the T2 registered models. Repeated measures analysis of variance followed by post-hoc Bonferroni tests were used for comparisons (P < .05). The agreement between methods and the intra and interobserver reproducibility were assessed with Bland-Altman tests and intraclass correlation coefficients (ICC). RESULTS: Comparisons of R2 with R3 methods showed greater agreement, mean differences ≤0.50 mm for all landmarks, than comparisons of R1 with R2, and R1 with R3, mean differences >0.50 mm for most of the y and z coordinates (P < .05). The R1 and R3 methods presented excellent intra and interobserver reproducibility and R2 method had moderate interobserver reproducibility. CONCLUSIONS: Longitudinal assessments of open bite treatment using digital dental models could consider the posterior teeth and/or the palate as references. The R1 and R3 methods showed adequate reproducibility and yield different quantitative results. The choice will depend on the posterior teeth changes and dental models' characteristics.

Quantification of three-dimensional morphology of craniofacial mineralized tissue defects in Tgfbr2/Osx-Cre mice.

Craniofacial morphology is affected by the growth, development, and three-dimensional (3D) relationship of mineralized structures including the skull, jaws, and teeth. Despite fulfilling different purposes within this region, cranial bones and tooth dentin are derived from mesenchymal cells that are affected by perturbations within the TGF-ß signaling pathway. TGFBR2 encodes a transmembrane receptor that is part of the canonical, SMAD-dependent TGF-ß signaling pathway and mutations within this gene are associated with Loeys-Dietz syndrome, a condition which often presents with craniofacial signs including craniosynostosis and cleft palate. To investigate the role of Tgfbr2 in immature, but committed, mineralized tissue forming cells, we analyzed postnatal craniofacial morphology in mice with conditional Tgfbr2 deletion in Osx-expressing cells. Novel application of a 3D shape-based comparative technique revealed that Tgfbr2 in Osx-expressing cells results in impaired postnatal molar root and anterior cranial growth. These findings support those from studies using similar Tgfbr2 conditional knockout models, highlight the anomalous facial and dental regions/structures using tomographic imaging-based techniques, and provide insight into the role of Tgfbr2 during postnatal craniofacial development.

Mandibular condylar remodeling characteristics after simultaneous condylectomy and orthognathic surgery.

INTRODUCTION: The objectives of this study were to evaluate postsurgical condylar remodeling using a radiographical interpretation, quantify condylar volumetric asymmetry, and assess soft tissue symmetry after simultaneous unilateral high condylectomy and bimaxillary osteotomies. METHODS: Sixteen patients diagnosed with unilateral condylar hyperplasia underwent unilateral high condylectomy and orthognathic surgery to correct skeletal and facial asymmetries. Cone-beam computed tomography scans were acquired before and 1-year after surgery. A radiographic consensus was evaluated for signs of reparative or degenerative changes. The condyles were mirrored and registered for assessment of volumetric and morphologic asymmetry. Soft tissue symmetry was evaluated by measurement of the distance of soft tissue pogonion from the skeletal midsagittal plane. RESULTS: Patients who undergo unilateral high condylectomy and orthognathic surgery present radiographic signs suggestive of degenerative changes, including sclerosis, osteophytes, flattening, and erosion in both the surgical and nonsurgical condyles (P ≤0.01). There was an average volumetric improvement of 531.9 ± 662.3 mm3 1-year postsurgery (P = 0.006). Soft tissue symmetry improved in all patients, with an average improvement of 65.8% (4.0 mm ± 2.6 mm, P ≤ 0.01). There was no correlation between the change in condylar volumetric asymmetry and the stability of the soft tissue correction. CONCLUSIONS: High condylectomy for the correction of a skeletal asymmetry in patients with condylar hyperplasia successfully reduces the volumetric asymmetry between the condyles. Postsurgical dysmorphic remodeling and degenerative changes were noted in both the surgical and nonsurgical condyles. Despite remarkable changes and remaining joint asymmetry, the soft tissue correction is stable 1-year postsurgery.