RESUMO
The functionalisation of carbon nanotubes has been instrumental in broadening its application field, allowing especially its use in biological studies. Although numerous covalent and non-covalent functionalisation methods have been described, the characterisation of the final materials has always been an added challenge. Among the various techniques available, Raman spectroscopy is one of the most widely used to determine the covalent functionalisation of these species. However, Raman spectroscopy is not a quantitative technique, and no studies are reported comparing its performance when the same number of functional groups are added but using completely different reactions. In this work, we have experimentally and theoretically studied the functionalisation of carbon nanotubes using two of the most commonly used reactions: 1,3-dipolar cycloaddition of azomethylene ylides and diazonium-based radical addition. The number of groups introduced onto the tubes by these reactions has been determined by different characterisation techniques. The results of this study support the idea that data obtained by Raman spectra are only helpful for comparing functionalisations produced using the same type of reaction. However, they should be carefully analysed when comparing functionalisations produced using different reaction types.
RESUMO
A family of acylhydrazones have been prepared and characterized with the aim of investigating their potential as information storage systems. Their well-established synthetic methodologies allowed for the preparation of seven chemically stable acylhydrazones in excellent yields that have been photophysically and photochemically characterized. In addition, DFT and TD-DFT calculations have been performed to gain more insights into the structural, energetic and photophysical properties of the E/Z isomers. Our results reveal that E/Z configurational isomerization upon irradiation is highly dependent on the stabilization of the E or Z isomers due to the formation of intramolecular H bonds and the electronic/steric effects intrinsically related to their structures. In addition, Raman spectroscopy is also used to confirm the molecular structural changes after the formation of hydrogen bonds in the isomers.
Assuntos
Análise Espectral Raman , Modelos Moleculares , Isomerismo , Espectroscopia de Ressonância Magnética , Teoria da Densidade FuncionalRESUMO
A series of donor-π-acceptor-π-donor (D-π-A-π-D) compounds based on naphthalendiimide (NDI) and perylenediimide (PDI) central cores combined with triphenylamine and phenylcarbazole donor groups have been synthesized, characterized and tested in top-contact/bottom gate organic field-effect transistors (OFETs). The results showed high electron mobilities, up to 0.3â cm2 V-1 s-1 , in the case of NDI derivatives and moderate values of around 10-3 â cm2 V-1 s-1 for PDI-based semiconductors. Quantum chemical calculations were performed in order to support the experimental data. The results suggest that adequate molecular characteristics and larger crystalline domains in NDI vs. PDI semiconducting films may be the reasons behind the enhanced electrical properties of NDI derivatives. Furthermore, when the lateral donor substituents are triphenylamine groups, the mobilities were slightly higher in comparison to phenylcarbazole donor groups due to an improved electron-donating character. Other characterization techniques, such as AFM, X-ray diffraction or spectroelectrochemistry, among others, have been performed to analyze supramolecular order, charge carriers' nature and stability, parameters closely related to charge transport characteristics.
RESUMO
In this study, a set of 10 positional indolocarbazole (ICz) isomers substituted with dicyanomethylene groups connected via para or meta positions are computationally investigated with the aim of exploring the efficiency of structural isomerism and substitution position in controlling their optical and electronic properties. Unrestricted density functional theory (DFT), a spin-flip time-dependent DFT approach, and the multireference CASSCF/NEVPT2 method have been applied to correlate the diradical character with the energetic trends (i.e., singlet-triplet energy gaps). In addition, the nucleus-independent chemical shift together with ACID plots and Raman intensity calculations were used to strengthen the relationship between the diradical character and (anti)aromaticity. Our study reveals that the substitution pattern and structural isomerism represent a very effective way to tune the diradical properties in ICz-based systems with meta-substituted systems with a V-shaped structure displaying the largest diradical character. Thus, this work contributes to the elucidation of the challenging chemical reactivity and physical properties of diradicaloid systems, guiding experimental chemists to produce new molecules with desirable properties.
RESUMO
A series of model oligomers consisting of combinations of a traditional strong donor unit (3,4-ethylenedioxythiophene), a traditional strong acceptor unit (benzo[c][1,2,5]thiadiazole), and the ambipolar unit thieno[3,4-b]pyrazine were synthesized via cross-coupling methods. The prepared oligomers include all six possible dimeric combinations in order to characterize the extent and nature of donor-acceptor effects commonly used in the design of conjugated materials, with particular focus on understanding how the inclusion of ambipolar units influences donor-acceptor frameworks. The full oligomeric series was thoroughly investigated via photophysical and electrochemical studies, in parallel with density functional theory (DFT) calculations, in order to correlate the nature and extent of donor-acceptor effects on both frontier orbital energies and the desired narrowing of the HOMO-LUMO energy gap. The corresponding relationships revealed should then provide a deeper understanding of donor-acceptor interactions and their application to conjugated materials.
RESUMO
In this study, the theoretical and experimental results on the molecular structure and reactivity of the plant flavonoids naringenin chalcone and naringenin are reported. UV-vis and Raman spectra were recorded and their main bands have been assigned theoretically. Moreover, the analysis of the naringenin chalcone-naringenin cyclization-isomerization reaction and the formation of homodimers and heterodimers have been performed within a DFT framework. The presence of H-bonded water networks is mandatory to make the cyclization energetically suitable, suggesting that this equilibrium will occur in an aqueous intracellular environment rather than in the extracellular and hydrophobic plant cuticles. Additionally, the preferential formation of homodimers stabilized by π-π stacking that will interact with other dimers by H-bonding over the formation of naringenin chalcone-naringenin heterodimers is also proposed in a hydrophobic environment. These results give a plausible model to explain how flavonoids are located within the cuticle molecular arrangement.
Assuntos
Flavanonas/química , Teoria da Densidade Funcional , Dimerização , Estrutura Molecular , EstereoisomerismoRESUMO
Ultralong organic phosphorescence holds great promise as an important approach for optical materials and devices. Most of phosphorescent organic molecules with long lifetimes are substituted with heavy atoms or carbonyl groups to enhance the intersystem crossing (ISC), which requires complicated design and synthesis. Here, we report a cyclization-promoted phosphorescence phenomenon by boosting ISC. N-butyl carbazole exhibits a phosphorescence lifetime (τp) of only 1.45 ms and a low phosphorescence efficiency in the solution state at 77 K due to the lack of efficient ISC. In order to promote its phosphorescence behavior, we explored the influence of conjugation. By linear conjugation of four carbazole units, possible ISC channels are increased so that a longer τp of 2.24 s is observed. Moreover, by cyclization, the energy gap between the singlet and triplet states is dramatically decreased to 0.04 eV for excellent ISC efficiency accompanied by increased rigidification to synergistically suppress the nonradiative decay, resulting in satisfactory phosphorescence efficiency and a prolonged τp to 3.41 s in the absence of any heavy atom or carbonyl group, which may act as a strategy to prepare ultralong phosphorescent organic materials by enhancing the ISC and rigidification.
RESUMO
This work describes the synthesis and properties of a dicyanomethylene-substituted indolo[3,2-b]carbazole diradical ICz-CN. This quinoidal system dimerises almost completely to (ICz-CN)2 , which contains two long C(sp3 )-C(sp3 ) σ-bonds between the dicyanomethylene units. The minor open-shell ICz-CN component in the solid-state mixture was identified by EPR spectroscopy. Cyclic voltammetry and UV-visible spectroelectrochemical data, as well as comparison with reference monomer ICz-Br reveal that the nature of the one-electron oxidation of (ICz-CN)2 at ambient temperature and ICz-CN at elevated temperature is very similar in all these compounds due to the prevailing localization of their HOMO on the ICz backbone. The peculiar cathodic behaviour reflects the co-existence of (ICz-CN)2 and ICz-CN. The involvement of the dicyanomethylene groups stabilizes the close-lying LUMO and LUMO+1 of (ICz-CN)2 and especially ICz-CN compared to ICz-Br, resulting in a distinctive cathodic response at low overpotentials. Differently from neutral ICz-CN, its radical anion and dianion are remarkably stable under ambient conditions. The UV/Vis(-NIR) electronic transitions in parent (ICz-CN)2 and ICz-CN and their different redox forms have been assigned convincingly with the aid of TD-DFT calculations. The σ-bond in neutral (ICz-CN)2 is cleaved in solution and in the solid-state upon soft external stimuli (temperature, pressure), showing a strong chromism from light yellow to blue-green. Notably, in the solid state, the monomeric diradical species is predominantly formed under high hydrostatic pressure (>1â GPa).
RESUMO
Two new luminophore polymorphs of 4-bromo-7-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole (1α and 1ß) exhibiting different color emissions, which switch into each other in response to shear force and solvent vapors, are presented and their X-ray structure is determined. Supramolecular organic framework topology (SOFT) studies on the two polymorphic structures led us to conclude that the mechanochromic phase transformation can be explained on the basis of modifications in their respective topological nets: mab and pcu for 1α and 1ß, respectively, as a result of the breaking and restoration of a number of weak supramolecular interactions. The color changes accompanying this transformation have been rationalized with the help of time-dependent density functional theory. We firmly believe that our findings will inspire future research on the design of novel stimuli-responsive organic materials with switchable properties based on their supramolecular interactions by establishing clear SOFT-property relationships.
RESUMO
Carbon nanohorns have been functionalized with oligothiophene units via the 1,3-dipolar cycloaddition reaction under microwave irradiation and solvent-free conditions. A dramatic Raman enhancement was found for one of the synthesized derivatives. Experimental and in silico studies helped to understand the enhancement, attributed to the modification of electromagnetic fields upon functionalization at the tip of the nanostructures.
RESUMO
A new rod-shaped benzothiadiazole fluorophore, namely, 4,7-di-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole, which strongly emits fluorescence both in solution and in solid state has been synthesized, and its photophysical properties were rationalized with the help of density functional theory calculations. This molecule crystallizes in two distinct light-emitting crystalline phases, which can be interconverted in response to pressure, temperature, and solvent vapors. Powder X-ray diffraction indicates that in both polymorph, molecules adopt a lamellar packing, the different interlayer spacing being the main difference between the two structures. Single-crystal analysis of one of the polymorphs allows us to identify weak interaction planes, which presumably facilitates the polymorphic transformation through mechanically or thermally induced sliding processes. The polymorphic transformation and the origin of the switchable fluorescence have been rationalized through a spectroscopic and theoretical study. This study suggests that the different colors observed are due to different intermolecular aromatic interactions owing to the displacement of the molecules with respect to the layer normal. Interestingly, blending this molecule with a biodegradable polymer such as poly(vinyl alcohol) gives rise to a thermally activated reversible switchable fluorescent system, which entitles this material as an attractive candidate for technological applications, such as thermal sensors, security inks, or rewritable paper.
RESUMO
Unpaired electrons of organic radicals can offer high electrical conductivity without doping, but they typically suffer from low stability. Herein, we report two organic diradicaloids based on quinoidal oligothiophene derivative (QOT), that is, BTICN and QTICN, with high stability and conductivity by employing imide-bridged fused molecular frameworks. The attachment of a strong electron-withdrawing imide group to the tetracyano-capped QOT backbones enables extremely deeply aligned LUMO levels (from -4.58 to -4.69 eV), cross-conjugated diradical characters, and remarkable ambient stabilities of the diradicaloids with half-lives > 60 days, which are among the highest for QOT diradicals and also the widely explored polyaromatic hydrocarbon (PAH)-based diradicals. Specifically, QTICN based on a tetrathiophene imide exhibits a cross-conjugation assisted self-doping in the film state as revealed by XPS and Raman studies. This property in combination with its ordered packing yields a high electrical conductivity of 0.34 S cm-1 for the QTICN films with substantial ambient stability, which is also among the highest values in organic radical-based undoped conductive materials reported to date. When used as an n-type thermoelectric material, QTICN shows a promising power factor of 1.52 uW m-1 K-2. Our results not only provide new insights into the electron conduction mechanism of the self-doped QOT diradicaloids but also demonstrate the great potential of fused quinoidal oligothiophene imides in developing stable diradicals and high-performance doping-free n-type conductive materials.
RESUMO
We report the synthesis and characterization of a novel series of push-pull chromophores bearing 1D linear and ß-branched thiophenes as π-conjugated spacers between a 2,2,4,7-tetramethyl-1,2,3,4-tetrahydroquinoline electron donor unit and dicyano- and tricyanovinylene electron acceptor groups. The effect of the introduction of ß-thiophenes on the linear and nonlinear (NLO) optical properties as well as electrochemical and thermal data is studied in detail by performing a comparative study between the branched and 1D linear systems. In addition, a parallel DFT computational study is used to evaluate structure-property relationships. The non-linear optical behavior of the molecules both in solution and in solid state as electro-optic (EO) films using a guest-host approach shows very promising performance for electro-optic applications with high molecular first hyperpolarizabilities (µß) of 4840 × 10-48 esu and electro-optic coefficients r33 reaching 650 pm V-1. One highlight is that the electro-optic films of the ß-branched chromophores are superior in terms of thermal stability in device operation as measured by a transmissive modified reflective Teng-Man method. This work provides guidelines for the design of improved electro-optic materials including ß-branched chromophores which could be useful for practical EO applications, where both enhanced ß and r33 values together with chemical and thermal stability are necessary.
RESUMO
The synthesis, self-assembly, and semiconducting properties of a series of disk-like truxenone derivatives, functionalized with three peripheral long alkyl chains, either directly attached or distanced by linking phenyl or ethynyl groups, are reported. The strategy of distancing the alkyl chains from the central aromatic cores induces in these discotics well-ordered columnar assemblies and has a favorable effect on their charge-carrier mobility. Electron mobility values above 1â cm2 V-1 S-1 were determined for a truxenone functionalized with three peripheral decynyl chains by means of the space charge-limited current technique. DFT calculations help to rationalize the high mobility values found for these new truxenone-based systems, indicating efficient intermolecular electronic couplings (fostered by a favorable stacking configuration) and moderate intramolecular reorganization energies for electrons in the origin of such high mobilities.
RESUMO
A series of Donor-π-Acceptor-π-Donor compounds based on a 2H-benzo[d][1,2,3]triazole core branched with different alkynyl donor groups has been characterized and tested in organic field-effect transistors (OFETs). The electronic and molecular structures were elucidated through optical and vibrational spectroscopy in conjunction with DFT calculations. The results indicate that the planarity of the structure and the good intramolecular charge transfer from the electron-donating to the electron-withdrawing fragments play a critical role in the application of the compounds as semiconductors in OFET devices. The compounds were tested in a top-contact/bottom-gate thin film transistor architecture, and they behave as p-type semiconductors.
RESUMO
A new design paradigm for the production of low band gap polymers is reported, in which an ambipolar unit exhibiting both donor and acceptor properties is combined with a conventional acceptor. As initial examples of this approach, the synthesis of two alternating copolymers of thieno[3,4-b]pyrazine and 2,1,3-benzothiadiazole via direct arylation polymerization is reported to give soluble, processable materials with band gaps of 0.97 and 1.05 eV. Although direct arylation polymerization has been previously used to synthesize donor-acceptor materials with band gaps below 1.5 eV, this represents only the second material generated by this polymerization method with a band gap below 1.0 eV.
RESUMO
This work reports on a quinodimethane-type molecule, 2,7-dicyanomethylene-9-(2-ethylhexyl)carbazole (1), one of the shortest π-conjugated biradicaloids reported to be stable in solution under ambient conditions. This carbazole-based quinoidal precursor is able to form a macrocyclic σ-bonded tetramer (2). The resolved single-crystal X-ray structure of tetramer 2 shows that four molecules of 1 are linked together through four long (CN)2 C-C(CN)2 bonds (1.631â Å) resulting from coupling of the unpaired electrons in biradicaloid 1. Dynamic interconversion between monomer 1 and cyclophane tetramer 2 is achieved by reversible cleavage and recovery of the four (CN)2 C-C(CN)2 bonds upon soft external stimuli (light absorption, temperature and pressure), which is accompanied by significant color changes. These novel photo-, thermo-, and mechanochromic properties expand the versatility of π-conjugated biradicaloid compounds as novel functional materials that, in combination with spin chemistry and dynamic covalent chemistry, can be relevant in molecular machines, sensors, and switches.
RESUMO
The p-type semiconducting properties of a triphenylene-fused triindole mesogen, have been studied by applying two complementary methods which have different alignment requirements. The attachment of only three flexible alkyl chains to the nitrogen atoms of this π-extended core is sufficient to induce columnar mesomorphism. High hole mobility values (0.65 cm2 V-1 s-1) have been estimated by space-charge limited current (SCLC) measurements in a diode-like structure which are easily prepared from the melt, rendering this material a good candidate for OPVs and OLEDs devices. The mobility predicted theoretically via a hole-hopping mechanism is in very good agreement with the experimental values determined at the SCLC regime. On the other hand the hole mobility determined on solution processed thin film transistors (OFETs) is significantly lower, which can be rationalized by the high tendency of these large molecules to align on surfaces with their extended π-conjugated core parallel to the substrate as demonstrated by SERS. Despite the differences obtained with the two methods, the acceptable performance found on OFETs fabricated by simple drop-casting processing of such an enlarged aromatic core is remarkable and suggests facile hopping between neighboring molecular columns owing to the large conducting/isolating ratio found in this discotic compound.
RESUMO
Inversion of the connections of amidine linkers combined with controlled oligothiophene chain catenation in oligothiophene-naphthalimide assemblies provides an efficient method to tune the HOMO and LUMO values in this type of assemblies. This modification also suppresses the intramolecular charge transfer (ICT) band normally found in this type of derivatives, also delocalizing the frontier molecular orbitals over the whole conjugated skeleton. The resultant assemblies were used in the fabrication of field-effect transistors, which showed well-balanced ambipolar transport.
RESUMO
We present a joint theoretical and experimental study of a series of cyclic indole tetramers aimed at understanding the fundamental electronic properties of this 3D platform and evaluating its potential in the construction of new semiconductors. To this end, we combined absorption and Raman spectroscopy, cyclic voltammetry, and spectroelectrochemistry with DFT calculations. Our results suggest that this platform can be easily and reversibly oxidized. Additionally, it has a HOMO that matches very well with the workfunction of gold, therefore charge injection from a gold electrode is expected to occur without significant barriers. Interestingly, the cyclic tetraindoles allow for good electron delocalization in spite of their saddle-shaped structures. The steric constraints introduced by N-substitution significantly inhibits ring inversion of the central cyclooctatetraene unit, whereas it only barely affects the optical and electrochemical properties (a slightly higher oxidation potential and a blueshifted absorption upon alkylation are observed).