Quantifying Shape Transition in Anisotropic Plasmonic Nanoparticles through Geometric Inversion. Application to Gold Bipyramids.

Unraveling the nuanced interplay between the morphology and the optical properties of plasmonic nanoparticles is crucial for targeted applications. Managing the relationship becomes significantly complex when dealing with anisotropic nanoparticles that defy a simple description using parameters like length, width, or aspect ratio. This complexity requires computationally intensive numerical modeling and advanced imaging techniques. To address these challenges, we propose a detailed structural parameter determination of gold nanoparticles using their two-dimensional projections (e.g., micrographs). Employing gold bipyramids (AuBPs) as a model morphology, we can determine their three-dimensional geometry and extract optical features computationally for comparison with the experimental data. To validate our inversion model's effectiveness, we apply it to derive the structural parameters of AuBPs undergoing shape modification through oxidative etching. In summary, our findings allow for the precise characterization of structural parameters for plasmonic nanoparticles during shape transitions, potentially enhancing the comprehension of nanocrystal growth and optimizing plasmonic material design for various applications.

Enhanced Photocurrent and Electrically Pumped Quantum Dot Emission from Single Plasmonic Nanoantennas.

Integrating cavity-enhanced colloidal quantum dots (QDs) into photonic chip devices would be transformative for advancing room-temperature optoelectronic and quantum photonic technologies. However, issues with efficiency, stability, and cost remain formidable challenges to reach the single antenna limit. Here, we present a bottom-up approach that delivers single QD-plasmonic nanoantennas with electrical addressability. These QD nanojunctions exhibit robust photoresponse characteristics, with plasmonically enhanced photocurrent spectra matching the QD solution absorption. We demonstrate electroluminescence from individual plasmonic nanoantennas, extending the device lifetime beyond 40 min by utilizing a 3 nm electron-blocking polymer layer. In addition, we reveal a giant voltage-dependent redshift of up to 62 meV due to the quantum-confined Stark effect and determine the exciton polarizability of the CdSe QD monolayer to be 4 × 10-5 meV/(kV/cm)2. These developments provide a foundation for accessing scalable quantum light sources and high-speed, tunable optoelectronic systems operating under ambient conditions.

Colloidal quasicrystals engineered with DNA.

In principle, designing and synthesizing almost any class of colloidal crystal is possible. Nonetheless, the deliberate and rational formation of colloidal quasicrystals has been difficult to achieve. Here we describe the assembly of colloidal quasicrystals by exploiting the geometry of nanoscale decahedra and the programmable bonding characteristics of DNA immobilized on their facets. This process is enthalpy-driven, works over a range of particle sizes and DNA lengths, and is made possible by the energetic preference of the system to maximize DNA duplex formation and favour facet alignment, generating local five- and six-coordinated motifs. This class of axial structures is defined by a square-triangle tiling with rhombus defects and successive on-average quasiperiodic layers exhibiting stacking disorder which provides the entropy necessary for thermodynamic stability. Taken together, these results establish an engineering milestone in the deliberate design of programmable matter.

Temperature-Modulated Reversible Clustering of Gold Nanorods Driven by Small Surface Ligands.

Temperature-modulated colloidal phase of plasmonic nanoparticles is a convenient playground for resettable soft-actuators or colorimetric sensors. To render reversible clustering under temperature change, bulky ligands are required, especially if anisotropic morphologies are of interest. This study showcases thermoresponsive gold nanorods by employing small surface ligands, bis (p-sulfonatophenyl) phenyl-phosphine dihydrate dipotassium salt (BSPP) and native cationic surfactant. Temperature-dependent analysis in real-time allowed to describe the structural features (interparticle distance and cluster size) as well as thermal parameters, melting and freezing temperatures. These findings suggest that neither covalent Au-S bonds nor bulky ligands are required to obtain a robust thermoresponsive system based on anisotropic gold nanoparticles, paving the way to stimuli-responsive nanoparticles with a wide range of sizes and geometries.

Photoluminescence upconversion in monolayer WSe2 activated by plasmonic cavities through resonant excitation of dark excitons.

Anti-Stokes photoluminescence (PL) is light emission at a higher photon energy than the excitation, with applications in optical cooling, bioimaging, lasing, and quantum optics. Here, we show how plasmonic nano-cavities activate anti-Stokes PL in WSe2 monolayers through resonant excitation of a dark exciton at room temperature. The optical near-fields of the plasmonic cavities excite the out-of-plane transition dipole of the dark exciton, leading to light emission from the bright exciton at higher energy. Through statistical measurements on hundreds of plasmonic cavities, we show that coupling to the dark exciton leads to a near hundred-fold enhancement of the upconverted PL intensity. This is further corroborated by experiments in which the laser excitation wavelength is tuned across the dark exciton. We show that a precise nanoparticle geometry is key for a consistent enhancement, with decahedral nanoparticle shapes providing an efficient PL upconversion. Finally, we demonstrate a selective and reversible switching of the upconverted PL via electrochemical gating. Our work introduces the dark exciton as an excitation channel for anti-Stokes PL in WSe2 and paves the way for large-area substrates providing nanoscale optical cooling, anti-Stokes lasing, and radiative engineering of excitons.

Determination of 2D Particle Size Distributions in Plasmonic Nanoparticle Colloids via Analytical Ultracentrifugation: Application to Gold Bipyramids.

Multidimensional particle properties determine the product properties in numerous advanced applications. Accurate and statistically meaningful measurements of complex particles and their multidimensional distributions are highly challenging but strongly needed. 2D particle size distributions of plasmonic nanoparticles of complex regular shape can be obtained from analytical ultracentrifugation experiments via the optical back coupling method. A workflow for the calculation of frictional properties of arbitrarily shaped nanoparticles was developed based on bead shell models and applied to gold bipyramids with a pentagonal cross-section. The obtained 2D particle length-diameter distributions and the reduced cumulative 1D length and diameter distributions were compared to transmission electron microscopy measurements. While we find very good agreement for most measurements, the obtained length and diameter distributions were shifted by a few nanometers for some samples. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, electron tomography, and finite element modeling indicate that the shift originated from a slight mismatch between the assumed shape of the simulated perfect bipyramids and the real particle shape and composition due to the presence of silver in the particles. This study demonstrates the feasibility of the applied techniques for complex shape analysis of nanoparticle ensembles with unmatched particle count numbers.

Full Control of Plasmonic Nanocavities Using Gold Decahedra-on-Mirror Constructs with Monodisperse Facets.

Bottom-up assembly of nanoparticle-on-mirror (NPoM) nanocavities enables precise inter-metal gap control down to ≈ 0.4 nm for confining light to sub-nanometer scales, thereby opening opportunities for developing innovative nanophotonic devices. However limited understanding, prediction, and optimization of light coupling and the difficulty of controlling nanoparticle facet shapes restricts the use of such building blocks. Here, an ultraprecise symmetry-breaking plasmonic nanocavity based on gold nanodecahedra is presented, to form the nanodecahedron-on-mirror (NDoM) which shows highly consistent cavity modes and fields. By characterizing > 20 000 individual NDoMs, the variability of light in/output coupling is thoroughly explored and a set of robust higher-order plasmonic whispering gallery modes uniquely localized at the edges of the triangular facet in contact with the metallic substrate is found. Assisted by quasinormal mode simulations, systematic elaboration of NDoMs is proposed to give nanocavities with near hundred-fold enhanced radiative efficiencies. Such systematically designed and precisely-assembled metallic nanocavities will find broad application in nanophotonic devices, optomechanics, and surface science.

Behavior of Au Nanoparticles under Pressure Observed by In Situ Small-Angle X-ray Scattering.

The mechanical properties and stability of metal nanoparticle colloids under high-pressure conditions are investigated by means of optical extinction spectroscopy and small-angle X-ray scattering (SAXS), for colloidal dispersions of gold nanorods and gold nanospheres. SAXS allows us to follow in situ the structural evolution of the nanoparticles induced by pressure, regarding both nanoparticle size and shape (form factor) and their aggregation through the interparticle correlation function S(q) (structure factor). The observed behavior changes under hydrostatic and nonhydrostatic conditions are discussed in terms of liquid solidification processes yielding nanoparticle aggregation. We show that pressure-induced diffusion and aggregation of gold nanorods take place after solidification of the solvent. The effect of nanoparticle shape on the aggregation process is additionally discussed.

Shiga Toxin-B Targeted Gold Nanorods for Local Photothermal Treatment in Oral Cancer Clinical Samples.

Introduction: A great challenge in nanomedicine, and more specifically in theranostics, is to improve the specificity, selectivity, and targeting of nanomaterials towards target tissues or cells. The topical use of nanomedicines as adjuvants to systemic chemotherapy can significantly improve the survival of patients affected by localized carcinomas, reducing the side effects of traditional drugs and preventing local recurrences. Methods: Here, we have used the Shiga toxin, to design a safe, high-affinity protein-ligand (ShTxB) to bind the globotriaosylceramide receptor (GB3) that is overexpressed on the surfaces of preneoplastic and malignant cancer cells in the head and neck tumors. Results: We find that ShTxB functionalized gold nanorods are efficiently retrotranslocated to the GB3-positive cell cytoplasms. After 3 minutes of laser radiation with a wavelength resonant with the AuNR longitudinal localized surface plasmon, the death of the targeted cancer cells is activated. Both preclinical murine models and patient biopsy cells show the non-cytotoxic nature of these functionalized nanoparticles before light activation and their treatment selectivity. Discussion: These results show how the use of nanomedicines directed by natural ligands can represent an effective treatment for aggressive localized cancers, such as squamous cell carcinoma of the oral cavity.

Element Specific Atom Counting at the Atomic Scale by Combining High Angle Annular Dark Field Scanning Transmission Electron Microscopy and Energy Dispersive X-ray Spectroscopy.

A new methodology is presented to count the number of atoms in multimetallic nanocrystals by combining energy dispersive X-ray spectroscopy (EDX) and high angle annular dark field scanning transmission electron microscopy (HAADF STEM). For this purpose, the existence of a linear relationship between the incoherent HAADF STEM and EDX images is exploited. Next to the number of atoms for each element in the atomic columns, the method also allows quantification of the error in the obtained number of atoms, which is of importance given the noisy nature of the acquired EDX signals. Using experimental images of an Au@Ag core-shell nanorod, it is demonstrated that 3D structural information can be extracted at the atomic scale. Furthermore, simulated data of an Au@Pt core-shell nanorod show the prospect to characterize heterogeneous nanostructures with adjacent atomic numbers.

Thermal Activation of Gold Atom Diffusion in Au@Pt Nanorods.

Understanding the thermal stability of bimetallic nanoparticles is of vital importance to preserve their functionalities during their use in a variety of applications. In contrast to well-studied bimetallic systems such as Au@Ag, heat-induced morphological and compositional changes in Au@Pt nanoparticles are insufficiently understood, even though Au@Pt is an important material for catalysis. To investigate the thermal instability of Au@Pt nanorods at temperatures below their bulk melting point, we combined in situ heating with two- and three-dimensional electron microscopy techniques, including three-dimensional energy-dispersive X-ray spectroscopy. The experimental results were used as input for molecular dynamics simulations, to unravel the mechanisms behind the morphological transformation of Au@Pt core-shell nanorods. We conclude that thermal stability is influenced not only by the degree of coverage of Pt on Au but also by structural details of the Pt shell.

Probing the glycans accessibility in the nanoparticle biomolecular corona.

HYPOTHESIS: Following blood administration, the pristine surface of nanoparticles (NPs) associates with biomolecules from the surrounding environment forming the so-called "biomolecular corona". It is well accepted that the biomolecular corona dramatically affects the NP fate in the biological medium while the pristine surface is no longer available for binding. Recent studies have shown that the glycans associated with the proteins forming the corona have a role in the NP interaction with macrophages, but the glycan identities remain unknown. We aim here to identify the glycan composition of the biomolecular corona and to assess the role of these glycans in the interaction of the proteins from the corona with glycan binding biomolecules, such as lectins. EXPERIMENTS: In this study, we have characterized the biomolecular corona of citrate stabilised gold NPs after exposure of the NPs to blood plasma at two different plasma concentrations, mimicking the in vitro and in vivo conditions. We have extensively characterized the biomolecular corona using HILIC chromatography and shotgun proteomics. Following this, a lectin binding assay was carried out using Dynamic Light Scattering (DLS) and Fluorescence Correlation Spectroscopy (FCS) to assess whether proteins with known affinity towards specific glycans would bind to the corona. FINDINGS: Our findings highlighted that the protein corona composition is dependent on the exposing conditions. However, under both plasma concentrations, the biantennary sialylated glycans (A2G2S2) are enriched. DLS and FCS confirmed that the glycans are accessible for binding as the corona interacts with lectins with known affinity towards terminal sialic acids and the enzymatic removal of the glycans leads to a decrease in lectin affinity. This study shows for the first time that the glycans are present in the corona and that they could potentially be responsible for the modulation of NP biological processes as they can directly engage with glycan binding receptors that are highly expressed in an organism.

Rapid Volumetric Optoacoustic Tracking of Nanoparticle Kinetics across Murine Organs.

Large-scale visualization of nanoparticle kinetics is essential for optimizing drug delivery and characterizing in vivo toxicity associated with engineered nanomaterials. Real-time tracking of nanoparticulate agents across multiple murine organs is hindered with the currently available whole-body preclinical imaging systems due to limitations in contrast, sensitivity, spatial, or temporal resolution. Herein, we demonstrate rapid volumetric tracking of gold nanoagent kinetics and biodistribution in mice at a suborgan level with single-sweep volumetric optoacoustic tomography (sSVOT). The imaging system accomplishes whole-body three-dimensional scans in less than 1.8 s, further attaining a high spatial resolution of 130 µm and sub-picomolar sensitivity. We visualized the clearance dynamics of purposely synthesized gold nanorods and nanorod clusters, featuring different sizes and surface chemistries as well as their corresponding accumulation within the liver and spleen. The newly discovered capacity to image rapid whole-body kinetics down to suborgan scales opens up new avenues for the development and characterization of diagnostic and therapeutic nanoagents.

Kinetic Regulation of the Synthesis of Pentatwinned Gold Nanorods below Room Temperature.

The synthesis of gold nanorods requires the presence of symmetry-breaking and shape-directing additives, among which bromide ions and quaternary ammonium surfactants have been reported as essential. As a result, hexadecyltrimethylammonium bromide (CTAB) has been selected as the most efficient surfactant to direct anisotropic growth. One of the difficulties arising from this selection is the low solubility of CTAB in water at room temperature, and therefore the seeded growth of gold nanorods is usually performed at 25 °C or above, which has restricted so far the analysis of kinetic effects derived from lower temperatures. We report a systematic study of the synthesis of gold nanorods from pentatwinned seeds using hexadecyltrimethylammonium chloride (CTAC) as the principal surfactant and a low concentration of bromide as shape-directing agent. Under these conditions, the synthesis can be performed at temperatures as low as 8 °C, and the corresponding kinetic effects can be studied, resulting in temperature-controlled aspect ratio tunability.

In Vivo Evaluation of Multifunctional Gold Nanorods for Boron Neutron Capture and Photothermal Therapies.

The incidence and mortality of cancer demand more innovative approaches and combination therapies to increase treatment efficacy and decrease off-target side effects. We describe a boron-rich nanoparticle composite with potential applications in both boron neutron capture therapy (BNCT) and photothermal therapy (PTT). Our strategy is based on gold nanorods (AuNRs) stabilized with polyethylene glycol and functionalized with the water-soluble complex cobalt bis(dicarbollide) ([3,3'-Co(1,2-C2B9H11)2]-), commonly known as COSAN. Radiolabeling with the positron emitter copper-64 (64Cu) enabled in vivo tracking using positron emission tomography imaging. 64Cu-labeled multifunctionalized AuNRs proved to be radiochemically stable and capable of being accumulated in the tumor after intravenous administration in a mouse xenograft model of gastrointestinal cancer. The resulting multifunctional AuNRs showed high biocompatibility and the capacity to induce local heating under external stimulation and trigger cell death in heterogeneous cancer spheroids as well as the capacity to decrease cell viability under neutron irradiation in cancer cells. These results position our nanoconjugates as suitable candidates for combined BNCT/PTT therapies.

On the Stiffness of Gold at the Nanoscale.

The density and compressibility of nanoscale gold (both nanospheres and nanorods) and microscale gold (bulk) were simultaneously studied by X-ray diffraction with synchrotron radiation up to 30 GPa. Colloidal stability (aggregation state and nanoparticle shape and size) in both hydrostatic and nonhydrostatic regions was monitored by small-angle X-ray scattering. We demonstrate that nonhydrostatic effects due to solvent solidification had a negligible influence on the stability of the nanoparticles. Conversely, nonhydrostatic effects produced axial stresses on the nanoparticle up to a factor 10× higher than those on the bulk metal. Working under hydrostatic conditions (liquid solution), we determined the equation of state of individual nanoparticles. From the values of the lattice parameter and bulk modulus, we found that gold nanoparticles are slightly denser (0.3%) and stiffer (2%) than bulk gold: V0 = 67.65(3) Å3, K0 = 170(3)GPa, at zero pressure.

Coupling plasmonic catalysis and nanocrystal growth through cyclic regeneration of NADH.

In a typical colloidal synthesis, the molecules of the reducing agent are irreversibly oxidized during nanocrystal growth. Such a scenario is of questionable sustainability when confronted with naturally occurring processes in which reducing agent molecules are cyclically regenerated. Here we show that cofactor molecules once consumed in the nucleation and growth of metallic nanocrystals can be photoregenerated using metallic nanocrystals as photocatalysts and reused in the subsequent nucleation process. Cyclic regeneration of cofactor molecules opens up the possibilities for the sustainable synthesis of inorganic nanoparticles.

The Influence of Size, Shape, and Twin Boundaries on Heat-Induced Alloying in Individual Au@Ag Core-Shell Nanoparticles.

Environmental conditions during real-world application of bimetallic core-shell nanoparticles (NPs) often include the use of elevated temperatures, which are known to cause elemental redistribution, in turn significantly altering the properties of these nanomaterials. Therefore, a thorough understanding of such processes is of great importance. The recently developed combination of fast electron tomography with in situ heating holders is a powerful approach to investigate heat-induced processes at the single NP level, with high spatial resolution in 3D. In combination with 3D finite-difference diffusion simulations, this method can be used to disclose the influence of various NP parameters on the diffusion dynamics in Au@Ag core-shell systems. A detailed study of the influence of heating on atomic diffusion and alloying for Au@Ag NPs with varying core morphology and crystallographic details is carried out. Whereas the core shape and aspect ratio of the NPs play a minor role, twin boundaries are found to have a strong influence on the elemental diffusion.

Engineering conductive protein films through nanoscale self-assembly and gold nanoparticles doping.

Protein-based materials are usually considered as insulators, although conductivity has been recently shown in proteins. This fact opens the door to develop new biocompatible conductive materials. While there are emerging efforts in this area, there is an open challenge related to the limited conductivity of protein-based systems. This work shows a novel approach to tune the charge transport properties of protein-based materials by using electron-dense AuNPs. Two strategies are combined in a unique way to generate the conductive solid films: (1) the controlled self-assembly of a protein building block; (2) the templating of AuNPs by the engineered building block. This bottom-up approach allows controlling the structure of the films and the distribution of the AuNPs within, leading to enhanced conductivity. This work illustrates a promising strategy for the development of effective hybrid protein-based bioelectrical materials.