RESUMO
PURPOSE: To describe the development and integration of an electronic health record-driven, student dashboard that displays real-time data relative to the students' patient management and clinic experiences at the University of Illinois Chicago, College of Dentistry. MATERIALS AND METHODS: Following development and implementation of the student dashboard, various objective metrics were evaluated to identify any improvements in the clinical patient management. A cross-sectional retrospective chart review was completed of the electronic health record (axiUm, Exan, Coquitlam, BC, Canada) from January 2019 to April 2022 evaluating four performance metrics: student lockouts, note/code violations, overdue active patients, and overdue recall patients. Descriptive statistics were analyzed. The Kolmogorov-Smirnov test was applied to assess the normal distribution of data. Data were analyzed by the Kruskal-Wallis tests for potential differences between pre-dashboard and post-dashboard implementation years with the mean overdue active/recall patient to student ratio variables. Mann-Whitney U-tests for between-groups comparisons with Bonferroni correction for multiple comparisons were performed (α = 0.05). Descriptive statistics were performed to analyze the student utilization frequency of the dashboard. RESULTS: Post-implementation analysis indicated a slight decrease in the number of lockouts and note/code violation; and a statistically significant decrease in overdue active patients post-dashboard (P < 0.001). On average, students accessed their dashboards 3.3 times a week. CONCLUSIONS: Implementation of a student dashboard through the electronic health record platform within an academic dental practice has the potential to assist students with patient management and is utilized regularly by the students.
RESUMO
INTRODUCTION: Orthognathic surgery (OGS) is a highly sophisticated surgical technique that aims to repair a variety of skeletal and dental abnormalities, including misaligned jaws and teeth. It requires precise preoperative preparation and advanced surgical skills, which are typically learned through years of practical experience in operating rooms or laboratory-based surgical training facilities utilizing cadavers or models. The traditional physical hands-on method of surgical training is still used at OGS. However, this method requires a longer time of preparation. Currently, mixed reality (MR)-a combination of virtual reality and augmented reality technology-is an innovation of OGS. The present study aimed to present a comprehensive review of studies that assessed the advantages of utilizing mixed reality technology in OGS. METHODS: A modified Population, Intervention, Comparison, Outcome strategy was performed using a combination of electronic (PubMed, Cochrane, Embase) and manual searches between 2013 and 2023 exploring mixed reality (MR) technology in OGS in the last 10 years. The inclusion criteria were limited to the patient and study model focusing on the clinical application of MR and the associated field of OGS. RESULT: The initial search indicated 1731 studies, of which 17 studies were included for analysis. The main results indicated that the use of MR technology in OGS led to high accuracy and time reduction as primary outcomes and cost-effectiveness and skill improvement as secondary outcomes. The review firmly concluded that MR technology exhibited a positive impact on students, trainees, and oromaxillofacial surgeons. However, due to the heterogeneity of the included studies, meta-analyses could not be performed. Collectively, these findings provide strong evidence for the advantages of MR technology in orthognathic surgery. CONCLUSION: MR technology significantly improves OGS planning efficiency by providing pre-surgical information and serving as an intraoperative navigation tool, reducing surgical time without compromising outcomes. Virtual training using MR technology exerts a positive impact on knowledge and skill improvement for OGS. This innovative technology will revolutionize the healthcare system and enhance patient care.
RESUMO
PURPOSE/OBJECTIVES: Admission into dental school involves selecting applicants for successful completion of the course. This study aimed to predict the academic performance of Kulliyyah of Dentistry, International Islamic University Malaysia pre-clinical dental students based on admission results using artificial intelligence machine learning (ML) models, and Pearson correlation coefficient (PCC). METHODS: ML algorithms logistic regression (LR), decision tree (DT), random forest (RF), and support vector machine (SVM) models were applied. Academic performance prediction in pre-clinical years was made using three input parameters: age during admission, pre-university Cumulative Grade Point Average (CGPA), and total matriculation semester. PCC was deployed to identify the correlation between pre-university CGPA and dental school grades. The proposed models' classification accuracy ranged from 29% to 57%, ranked from highest to lowest as follows: RF, SVM, DT, and LR. Pre-university CGPA was shown to be predictive of dental students' academic performance; however, alone they did not yield optimal outcomes. RF was the most precise algorithm for predicting grades A, B, and C, followed by LR, DT, and SVM. In forecasting failure, LR predicted three grades with the highest recall, SVM predicted two grades, and DT predicted one. RF performance was insignificant. CONCLUSION: The findings demonstrated the application of ML algorithms and PCC to predict dental students' academic performance. However, it was limited by several factors. Each algorithm has unique performance qualities, and trade-offs between different performance metrics may be necessary. No definitive model stood out as the best algorithm for predicting student academic success in this study.
RESUMO
PURPOSE: To evaluate the effect of mechanical, chemical, and mechanical-chemical surface treatment methods on shear bond strength between acrylic denture teeth and thermoplastic nylon denture base. MATERIALS AND METHODS: Maxillary central incisor teeth were treated with five different surface treatment methods: mechanical (sandblasting, T-shape diatoric holes), chemical (5% acetic acid solution, bonding agent), and mechanical-chemical (sandblasting + bonding agent) were embedded in thermoplastic nylon denture base (n = 10). A universal testing machine with a crosshead speed of 0.5 mm per minute was used to test the shear bond strength. Data obtained were statistically evaluated using one-way ANOVA and followed with Tukey post hoc test (α = 0.05) RESULTS: T-shaped diatoric holes exhibited significantly higher shear bond strength among the surface treatment groups, followed by sandblasting + bonding agent, sandblasting, bonding agent, and the acetic acid group (p < 0.001) CONCLUSION: T-shaped diatoric holes as a mechanical surface treatment showed higher shear bond strength than other methods.
RESUMO
Purpose: The purpose of this study was to synthesize and structurally characterize four ant nest membranes in four different concentrations and determine the best concentration that could potentially be used as an alternative material for the production of new collagen barrier membranes. Materials and Methods: Membranes were created by mixing ant nest extracts at various concentrations of 0.5%, 1%, 1.5%, and 2%, as well as collagen, chitosan, and Polyvinyl Alcohol (PVA) using a film casting. A Universal Testing Machine (UTM) was used to evaluate mechanical properties including elastic modulus, tensile strength, maximum elongation, elongation at break, and maximum force. Water absorption was performed, FTIR was used for functional group identification, and morphology was examined using SEM. Additionally, EDS was used to identify the composition and distribution of elements in membranes. Statistical analysis was conducted using ANOVA (analysis of variance) and post hoc testing with a significance level of p <0.01 for quantitative data. Results: The results showed that the mechanical properties produced the following mean (standard deviation): elastic modulus 0.87 Mpa (0.11), tensile strength 16.32 N/mm2 (2.46), maximum elongation 4.96% (1.72), elongation at break 5.23% (1.87), and maximum force 22.50 N (5.06). The average water absorption capacity of all four membranes had a p-value <0.01. FTIR spectrum showed various peaks corresponding to functional groups, while SEM results indicated a homogeneous mixture. EDS analysis confirmed that the addition of ant plant extract at 0.5%, 1%, and 1.5% resulted in the presence of elements C, O, and Ca. Meanwhile, membranes prepared with 2% concentration had a different composition, namely C, O, Ca, and Na. Conclusion: Increasing the concentration of ant nest affects the values of the membrane's mechanical properties parameters, including the elastic modulus (0.87 Mpa), tensile strength (16.32 N/mm2), maximum elongation (4.96%), elongation at break (5.23%), and maximum force (22.50 N). The average membrane absorption of water (p value <0.01) was also affected. SEM images showed homogeneous mixing, and membrane EDS results consisted of C, O, and Ca composition. However, there was no effect on FTIR functional groups. The anthill membrane with a 1% concentration has the potential to serve as an alternative membrane in guided tissue regeneration.
RESUMO
Purpose: The purpose of this study was to examine the level of evidence (LOE) characteristics and associated factors that change over time in three leading prosthodontics journals. Materials and methods: Articles published in The Journal of Prosthetic Dentistry (JPD), International Journal of Prosthodontics (IJP), and Journal of Prosthodontics (JP) in 2013 and 2020 were reviewed by eight independent reviewers. After applying exclusion and inclusion criteria, the number of authors, the corresponding author's educational degree, corresponding author's origin in each clinical research article were recorded. The included articles were rated by reviewers according to the level of evidence criteria and proposed level of evidence-associated factors. Descriptive statistics, univariable, and binary logistic regression analysis were performed to investigate dependent variables and potentially associated factors. All independent variables with a significant effect were analyzed by using a multivariable test. The entry and exit alpha level were set at αE = 0.15. The statistical significance was set at α = 0.05. Results: A total of 439 articles from 3 selected journals for the years studied met the inclusion criteria. The percentages of level 1, 2, 3, 4, and 5 articles were 2.7 %, 11.4 %, 9.6 %, 13.4 % and 62.9 %, respectively. Univariable analysis results demonstrated significant associations related to the number of authors (P = 0.005), the corresponding author's educational degree (P = 0.022), and the corresponding author's geographic origin (P = 0.042). Multivariable analysis results demonstrated significant associations related to the number of authors (P = 0.002), and the corresponding author's geographic origin (P = 0.014). Conclusions: The number of authors, CA degree, and CA origin had a significant association with the LOE of included prosthodontic studies. Although there was an increase in the number of publications from 2013 to 2020, the level of evidence trend shows no improvement over the years.
RESUMO
This study compared the clinical experiences of foreign-trained dentists (FTDs) enrolled in an Advance Standing DMD Dental Program (DMDAS) with those of the domestic dental students (DMD) at the University of Illinois Chicago, College of Dentistry (UIC-COD). A cross-sectional retrospective chart review of patients treated by 295 DMD and 253 DMDAS predoctoral dental students was completed at the UIC-COD. The data were retrieved from the electronic health record system (axiUm) for the graduated classes of 2018, 2019, 2020, 2021, and 2022 on various performed clinical procedures as measured by relative value units (RVUs). The retrieved data were used to compare the clinical experiences of DMDAS vs. DMD students. Descriptive (mean) and statistical (independent t-test) analyses were used (α = 0.05). The results indicated that DMD and DMDAS students had comparable clinical experiences in several disciplines, including diagnosis, prevention, direct/indirect restorations, endodontics, periodontics, complete dentures, removable partial dentures, implants/fixed partial dentures, and oral surgery. There was a statistical difference in total RVUs for diagnosis (p = 0.002) and direct restorations (p < 0.001), in which DMD students had more experience. The 28 month program for FTDs appeared to be a reasonable timeframe to obtain an adequate number of varied clinical experiences as compared with the traditional four-year program at the UIC-COD.
RESUMO
STATEMENT OF PROBLEM: Despite their widespread use in various educational contexts, the integration of chatbots into dental clinical education has not been thoroughly investigated. The noted discrepancy signifies a lack of understanding of how chatbots could enhance the personalized and interactive learning experiences of predoctoral dental students. PURPOSE: The purpose of this study was to evaluate the awareness and perceptions of artificial intelligence (AI) technology, interaction experiences, and concerns about a custom-developed chatbot (CB) intervention in the clinical education of predoctoral dental students at the University of Illinois Chicago, College of Dentistry (UIC-COD) compared with the traditional Blackboard (BB) online platform. MATERIAL AND METHODS: Eligible participants (n=86) providing verbal consent were allocated via the random block method into BB (n=43) and CB (n=43) groups and asked to engage with their designated platforms for 10 to 15 minutes by focusing on clinical inquiries in a predoctoral implant clinic and supported by a list of 35 typical questions. After the interaction, participants responded on a 5-point Likert scale to a 19-item survey probing AI awareness, platform engagement, and technological concerns. Survey data were anonymized and analyzed using descriptive, inferential statistics and nonparametric Mann-Whitney U tests to compare interventions. The Bonferroni correction for multiple comparisons was performed (α=.0045). RESULTS: Neither the BB or CB group showed any difference in their awareness and perception of AI technology. The CB group demonstrated improved timeliness (P<.001), more interaction (P<.001), reduced faculty workload (P=.001), enhanced receptiveness (P=.002), and less anxiety (P<.001) and was more satisfied (P<.001) when compared with the BB group. However, concerns regarding the potential for incorrect information (P=.003) were more pronounced in the CB group. CONCLUSIONS: The integration of chatbot technology into dental clinical education significantly enhanced learning and student engagement, highlighting the potential for future technological enrichment of the educational landscape.
RESUMO
STATEMENT OF PROBLEM: Information regarding facial landmark measurement using machine learning (ML) techniques in prosthodontics is lacking. PURPOSE: The objective of this study was to evaluate and compare the reliability, validity, and accuracy of facial anthropological measurements using both manual and ML landmark detection techniques. MATERIAL AND METHODS: Two-dimensional (2D) frontal full-face photographs of 50 men and 50 women were made. The interpupillary width (IPW), interlateral canthus width (LCW), intermedial canthus width (MCW), interalar width (IAW), and intercommissural width (ICW) were measured on 2D digital images using manual and ML methods. The automated measurements were recorded using a programming language (Python), and a convolutional neural network (CNN) model was trained to detect human facial landmarks. The obtained data from the manual and ML methods were analyzed using intraclass correlation coefficients (ICCs), the paired sample t test, Bland-Altman plots, and the Pearson correlation analysis (α=.05). RESULTS: Intrarater and interrater reliability values were greater than 0.90, indicating excellent reliability. The mean difference between the manual and ML measurements of IPW, MCW, IAW, and ICW was 0.02 mm, while it was 0.01 mm for LCW. No statistically significant differences were found between the measurements obtained by the manual and ML methods (P>.05). Highly significant positive correlations (P<.001) were obtained between the results of the manual and ML methods: (r=0.996[IPW], r=0.977[LCW], r=0.944[MCW], r=0.965[IAW], and r=0.997[ICW]). CONCLUSIONS: In the field of prosthodontics, the use of ML methods provides a reliable alternative to manual digital techniques for carrying out facial anthropometric measurements.
RESUMO
OBJECTIVE: the aim of this study was to analyze the influence of ozone therapy (OZN) on peri-implant bone repair in critical bones by installing osseointegrated implants in the tibia of ovariectomized rats. METHODOLOGY: ovariectomy was performed on 30 Wistar rats, aged six months (Rattus novergicus), and, after 90 days, osseointegrated implants were installed in each tibial metaphysis. The study groups were divided into the animals that received intraperitoneal ozone at a concentration of 700 mcg/kg - OZ Group (n=15) - and a control group that received an intraperitoneal saline solution and, for this reason, was named the SAL group (n=15). The applications for both groups occurred during the immediate post-operative period on the 2nd, 4th, 6th, 8th, 10th, and 12th day post-surgery. At various stages (14, 42, and 60 days), the animals were euthanized, and tests were performed on their tibiae. These tests include histomorphometric and immunohistochemical analyses, computerized microtomography, sampling in light-cured resin for calcified sections, and confocal microscopy. The obtained data were then analyzed using One-way ANOVA and the Shapiro-Wilk, Kruskal-Wallis, and student t-tests (P<0.05). RESULTS: our findings indicate that the OZ group (3.26±0.20 mm) showed better cellular organization and bone neoformation at 14 days (SAL group, 0.90±1.42 mm) (P=0.001). Immunohistochemistry revealed that osteocalcin labeling was moderate in the OZ group and mild in the SAL group at 14 and 42 days post-surgery. The data from the analysis of calcified tissues (microtomography, histometric, and bone dynamism analysis) at 60 days showed no statistically significant differences between the groups (P=0.32). CONCLUSION: it was concluded that ozone therapy anticipated the initial phases of the peri-implant bone repair process.
Assuntos
Implantes Dentários , Osseointegração , Feminino , Ratos , Animais , Humanos , Ratos Wistar , Osteocalcina/análise , Tíbia/cirurgia , Titânio , OvariectomiaRESUMO
PURPOSE: The Medical Education Research Study Quality Instrument (MERSQI) has been used frequently to assess the methodological quality of medical education but not for dental education. The present study aimed to assess the methodological quality using MERSQI scores of articles published in the Journal of Dental Education (JDE) and the European Journal of Dental Education (EJDE). METHODS: A cross-sectional assessment of the quality of manuscripts published in 2012, 2017, and 2022 JDE and EJDE was conducted. MERSQI data, numbers of authors, first and corresponding author degrees, geographic origins, and funding information were also extracted for each included study. Descriptive and analytical statistics were conducted, and significance level was set at α < 0.05. RESULTS: Four hundred ninety-five articles met the inclusion criteria. The most common study design was a single-group cross-sectional or single-group posttest and conducted in one institution for all studied years. In all journals and years, studies were assessed mainly by participants. The study outcome was mostly satisfaction, attitudes, perceptions, opinions, and general facts. The total mean MERSQI score for each journal and year varied. Year and geographic origin significantly affected the total MERSQI score. Papers originating from Asia had the highest score, followed by South America, Europe, North America, Oceania, and Africa. CONCLUSION: MERSQI score is applicable to the assessment of the methodological quality of dental educational research. The MERSQI score for most of the domains was similar for both journals. The MERSQI score was affected by publication years and geographic origins.
Assuntos
Educação em Odontologia , Publicações Periódicas como Assunto , Estudos Transversais , Publicações Periódicas como Assunto/normas , Educação em Odontologia/normas , Humanos , Projetos de Pesquisa/normas , Pesquisa em Odontologia/normasRESUMO
Statement of problem: One of the main challenges facing dental implant success is peri-implantitis. Recent evidence indicates that titanium (Ti) corrosion products and undetected-residual cement are potential risk factors for peri-implantitis. The literature on the impact of various types of dental cement on Ti corrosion is very limited. Purpose: This study aimed to determine the influence of dental cement on Ti corrosion as a function of cement amount and type. Materials and methods: Thirty commercially pure Ti grade 4 discs (19 × 7mm) were polished to mirror-shine (Ra ≈ 40 nm). Samples were divided into 10 groups (n = 3) as a cement type and amount function. The groups were no-cement as control, TempBond NE (TB3mm, TB5mm, and TB8mm), FujiCEM-II (FC3mm, FC5mm, and FC8mm), and Panavia-F-2.0 (PC3mm, PC5mm, and PC8mm). Tafel's method estimated corrosion rate (icorr) and corresponding potential (Ecorr) from potentiodynamic curves. Electrochemical Impedance Spectroscopy (EIS) data was utilized to obtain Nyquist and Bode plots. An equivalent electrical circuit estimated polarization resistance (Rp) and double-layer capacitance (Cdl). Inductively coupled plasma mass spectrometry (ICP-MS) analysis was conducted to analyze the electrolyte solution after corrosion. pH measurements of the electrolyte were recorded before and after corrosion tests. Finally, the corroded surface was characterized by a 3D white-light microscope and scanning electron microscope. Statistical analysis was conducted using either one-way ANOVA followed by Tukey's Post Hoc test or Kruskal-Wallis followed by Dunn's test based on data distribution. Results: Based on cement amount, FC and PC significantly increased icorr in higher amounts (FC8mm-icorr = 8.22 × 10-8A/cm2, PC8mm-icorr = 5.61 × 10-8A/cm2) compared to control (3.35 × 10-8A/cm2). In contrast, TB3mm decreased icorr significantly compared to the control. As a function of cement type, FC increased icorr the most. EIS data agrees with these observations. Finally, corroded surfaces had higher surface roughness (Ra) compared to non-corroded surfaces. Conclusion: The study indicated that cement types FC and PC led to increased Ti-corrosion as a function of a higher amount. Hence, the implant stability could be impacted by the selection, excessive cement, and a potentially increased risk of peri-implantitis.
RESUMO
Abstract Objective the aim of this study was to analyze the influence of ozone therapy (OZN) on peri-implant bone repair in critical bones by installing osseointegrated implants in the tibia of ovariectomized rats. Methodology ovariectomy was performed on 30 Wistar rats, aged six months (Rattus novergicus), and, after 90 days, osseointegrated implants were installed in each tibial metaphysis. The study groups were divided into the animals that received intraperitoneal ozone at a concentration of 700 mcg/kg — OZ Group (n=15) — and a control group that received an intraperitoneal saline solution and, for this reason, was named the SAL group (n=15). The applications for both groups occurred during the immediate post-operative period on the 2nd, 4th, 6th, 8th, 10th, and 12th day post-surgery. At various stages (14, 42, and 60 days), the animals were euthanized, and tests were performed on their tibiae. These tests include histomorphometric and immunohistochemical analyses, computerized microtomography, sampling in light-cured resin for calcified sections, and confocal microscopy. The obtained data were then analyzed using One-way ANOVA and the Shapiro-Wilk, Kruskal-Wallis, and student t-tests (P<0.05). Results our findings indicate that the OZ group (3.26±0.20 mm) showed better cellular organization and bone neoformation at 14 days (SAL group, 0.90±1.42 mm) (P=0.001). Immunohistochemistry revealed that osteocalcin labeling was moderate in the OZ group and mild in the SAL group at 14 and 42 days post-surgery. The data from the analysis of calcified tissues (microtomography, histometric, and bone dynamism analysis) at 60 days showed no statistically significant differences between the groups (P=0.32). Conclusion it was concluded that ozone therapy anticipated the initial phases of the peri-implant bone repair process.
RESUMO
STATEMENT OF PROBLEM: Patients with vascularized bone flaps from the fibula have reduced bone height, in which case a higher prosthetic abutment is needed for their implant-supported prosthesis. Although the double-flap technique seems promising, systematic reviews and meta-analyses of prospective studies are lacking. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the grafted areas of single barrel fibular flaps (SBFF) and double-barrel fibular flaps (DBFF) by considering failure rates, dental implant complications, and bone union at the osteotomy sites. MATERIAL AND METHODS: A systematic review and meta-analysis was performed in accordance with the preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement, population, intervention, control, and outcomes (PICO) question, and the National Health and Medical Research Council scales. The event rate of complications and failures was calculated with a confidence interval (CI) of 95%. RESULTS: A total of 13 prospective studies with 441 participants and 330 graft sites were identified. A total of 235 participants had SBFF with 445 implants, and 95 had DBFF with 164 implants. The overall combined graft failure rates were 4.2% for SBFF and 3.2% for DBFF. The complication rate was 10% for SBFF and 1.9% for DBFF. Implant failure was at 4.7% in the SBFF group and 3.4% in the DBFF group. CONCLUSIONS: Complication rates and implant failures were similar for SBFF and DBFF. Therefore, for long-term oral rehabilitation, both SBFF and DBFF are suitable procedures for mandibular reconstruction.
RESUMO
PURPOSE: To improve smile esthetics, clinicians should comprehensively analyze the face and ensure that the sizes selected for the maxillary anterior teeth are compatible with the available anthropological measurements. The inter commissural (ICW), interalar (IAW), intermedial-canthus (MCW), interlateral-canthus (LCW), and interpupillary (IPW) widths are used to determine the width of maxillary central incisors (CW). The aim of this study was to develop an automated approach using machine learning (ML) algorithms to predict central incisor width in a young Turkish population using anthropological measurements. This automation can contribute to digital dentistry and clinical decision-making. METHODS: In the initial phase of this cross-sectional study, several ML regression models-including multiple linear regression (MLR), multi-layer-perceptron (MLP), decision-tree (DT), and random forest (RF) models-were validated to confirm the central width prediction accuracy. Datasets containing only male and female measurements, as well as combined were considered for ML model implementation, and the performance of each model was evaluated for an unbiased population dataset. RESULTS: Compared with the other algorithms, the RF algorithm showed improved performance for all cases, with an accuracy of 96%, which represents the percentage of correct predictions. The plot reveals the applicability of the RF model in predicting the CW from anthropological measurements irrespective of the candidate's sex. CONCLUSIONS: These results demonstrated the possibility of predicting central incisor widths based on anthropometric measurements using ML models. The accurate central incisor width prediction from these trials also indicates the applicability of the proposed model to be deployed for enhanced clinical decision-making.
RESUMO
Early detection and prediction of bio-tribocorrosion can avert unexpected damage that may lead to secondary revision surgery and associated risks of implantable devices. Therefore, this study sought to develop a state-of-the-art prediction technique leveraging machine learning(ML) models to classify and predict the possibility of mechanical degradation in dental implant materials. Key features considered in the study involving pure titanium and titanium-zirconium (zirconium = 5, 10, and 15 in wt%) alloys include corrosion potential, acoustic emission(AE) absolute energy, hardness, and weight-loss estimates. ML prototype models deployed confirms its suitability in tribocorrosion prediction with an accuracy above 90%. Proposed system can evolve as a continuous structural-health monitoring as well as a reliable predictive modeling technique for dental implant monitoring.
RESUMO
STATEMENT OF PROBLEM: Information regarding dental implants can be difficult to understand for participants. Improving patients' dental implant health literacy remains a challenging process. PURPOSE: The purpose of this clinical study was to develop and evaluate patients' understanding of the implant treatment procedure, components, and sequences using traditional typodont and augmented reality (AR) applications (e-typodont), with the goal of improving their oral health literacy. MATERIAL AND METHODS: Participants who had sought dental implant treatment at the group practice and implant clinic at the University of Illinois Chicago (UIC) College of Dentistry were invited to enroll in this study. Participants were asked to fill out the first questionnaire (Q1) assessing their understanding of implant treatment procedures, components, and sequences. The participants were randomly exposed to 1 of the 2 modes of delivering education, typodont or AR e-typodont. The participants were asked to complete the additional 2 questionnaires (Q2 and Q3), and the posttest questionnaire (Q1) to re-evaluate their understanding of the implant treatment procedure, components, and sequences. All data were entered and coded into a spreadsheet. Descriptive (mean) and statistical (Wilcoxon Signed Ranks and Mann-Whitney U test) analyses were used (α=.05). RESULTS: Both interventions significantly increased participants' understanding of implant treatments (typodont: P=.004; e-typodont: P<.001), implant components (typodont: P=.003; e-typodont: P<.001), and implant treatment sequences (typodont: P=.001; e-typodont: P<.001). The e-typodont group significantly improved participants' understanding of implant treatments (P=.006), implant components (P=.023), and implant treatment sequences (P=.008) compared with the typodont group. Participants perceived the e-typodont mode of delivery to be significantly more interesting (P=.002), interactive (P=.008), educational (P=.002), user-friendly (P=.016), and "Wow" (P=.002) compared with the traditional typodont mode of delivery. CONCLUSIONS: Both interventions improved participants' understanding of implant treatment procedures, components, and sequences. The e-typodont showed better improvement in participants' understanding of dental implants compared with the traditional typodont.
RESUMO
Peri-implantitis is a substantially prevailing condition. A potential risk factor for peri-implantitis is Ti implant corrosion. During inflammation, substantial quantities of reactive oxygen species (ROS) secretion and local acidification occur. Little is known about the interaction between the inflammatory and corrosion products on Ti surface corrosion. Therefore, the objective of the current study was to evaluate the synergistic effect of hydrogen peroxide (H2O2), lactic acid, and Ti ions on Ti corrosion. Twenty-seven commercially pure Ti samples were polished (Ra ≈ 45 nm) and divided into 9 groups as a function of electrolyte: (1) artificial saliva (AS) as control (C), (2) AS + Ti ions 20 ppm (Ti), (3) AS + lactic acid (pH = 5.5) (L), (4) AS + lactic acid + Ti ions 20 ppm (TiL), (5) AS + H2O2 0.5 mM (HP0.5), (6) AS + H2O2 1.0 mM (HP1.0), (7) AS + H2O2 0.5 mM + Ti ions 20 ppm (HP0.5Ti), (8) AS + H2O2 0.5 mM + lactic acid (HP0.5L), and (9) AS + H2O2 0.5 mM + Ti ions 20 ppm + lactic acid (HP0.5TiL). Electrochemical tests were performed following ASMT guidelines. Based on Tafel's method, current density (icorr) and corresponding potential (Ecorr) were acquired from potentiodynamic curves. Using electrochemical intensity spectroscopy (EIS), Nyquist and Bode plots were derived. Using a modified Randles circuit, charge transfer resistance (Rct) and capacitance (Cdl) were estimated. Based on open-circuit potential data, groups C and Ti had the lowest potentials (around -0.3 and -0.4 V vs SCE, respectively), indicating a lower passivation tendency compared to the other groups. From potentiodynamic curves, groups HP0.5 and HP1.0 increased icorr the most. From EIS data, groups HP0.5 and HP1.0 demonstrated the lowest impedance and phase angle on the Bode plot, indicating the highest corrosion kinetics. Based on EIS modeling, the combination of Ti ions, lactic acid, and H2O2 (group HP0.5TiL) significantly decreased Rct (p < 0.05). In conclusion, the concurrent presence of Ti ions, lactic acid, and H2O2 in the vicinity of the Ti surface increased the corrosion kinetics. High corrosion may produce more Ti products in the peri-implant tissues, which may increase the potential risk of peri-implantitis.
Assuntos
Implantes Dentários , Peri-Implantite , Humanos , Peróxido de Hidrogênio , Titânio , Íons , Ácido LácticoRESUMO
Artificial bone grafting materials such as collagen are gaining interest due to the ease of production and implantation. However, collagen must be supplemented with additional coating materials for improved osteointegration. Here, we report room-temperature atomic layer deposition (ALD) of MgO, a novel method to coat collagen membranes with MgO. Characterization techniques such as X-ray photoelectron spectroscopy, Raman spectroscopy, and electron beam dispersion mapping confirm the chemical nature of the film. Scanning electron and atomic force microscopies show the surface topography and morphology of the collagen fibers were not altered during the ALD of MgO. Slow release of magnesium ions promotes bone growth, and we show the deposited MgO film leaches trace amounts of Mg when incubated in phosphate-buffered saline at 37 °C. The coated collagen membrane had a superhydrophilic surface immediately after the deposition of MgO. The film was not toxic to human cells and demonstrated antibacterial properties against bacterial biofilms. Furthermore, in vivo studies performed on calvaria rats showed MgO-coated membranes (200 and 500 ALD) elicit a higher inflammatory response, leading to an increase in angiogenesis and a greater bone formation, mainly for Col-MgO500, compared to uncoated collagen. Based on the characterization of the MgO film and in vitro and in vivo data, the MgO-coated collagen membranes are excellent candidates for guided bone regeneration.