RESUMO
Most mechanochromic luminescent compounds are crystalline and highly hydrophobic; however, mechanochromic luminescent molecular assemblies comprising amphiphilic molecules have rarely been explored. This study investigated mechanochromic luminescent supramolecular fibers composed of dumbbell-shaped 9,10-bis(phenylethynyl)anthracene-based amphiphiles without any tetraethylene glycol (TEG) substituents or with two TEG substituents. Both amphiphiles formed water-insoluble supramolecular fibers via linear hydrogen bond formation. Both compounds acquired water solubility when solid samples composed of supramolecular fibers are ground. Grinding induces the conversion of 1D supramolecular fibers into micellar assemblies where fluorophores can form excimers, thereby resulting in a large redshift in the fluorescence spectra. Excimer emission from the ground amphiphile without TEG chains is retained after dissolution in water. The micelles are stable in water because hydrophilic dendrons surround the hydrophobic luminophores. By contrast, when water is added to a ground amphiphile having TEG substituents, fragmented supramolecular fibers with the same molecular arrangement as the initial supramolecular fibers are observed, because fragmented fibers are thermodynamically preferable to micelles as the hydrophobic arrays of fluorophores are covered with hydrophilic TEG chains. This leads to the recovery of the initial fluorescent properties for the latter amphiphile. These supramolecular fibers can be used as practical mechanosensors to detect forces at the mesoscale.
RESUMO
Novel water-dispersible donor-acceptor-donor π-conjugated bolaamphiphiles, having dibenzophenazine as the acceptor and heteroatom-bridged amphiphilic diarylamines as the donors, have been developed. The materials displayed a distinct photoluminescence color change in response to humidity in a poly(vinylalcohol) matrix.
RESUMO
Correction for 'Water-dispersible donor-acceptor-donor π-conjugated bolaamphiphiles enabling a humidity-responsive luminescence color change' by Tomoya Enjou et al., Chem. Commun., 2024, https://doi.org/10.1039/d3cc05749f.
RESUMO
Tetracene cyclophanes: a series of cyclic tetracene dimers bridged by two flexible ethylene glycol units demonstrated enhanced intramolecular singlet fission through through-space orientations by suppressing the H-type excited complex.
RESUMO
Solar steam generation (SSG) is a promising photothermal technology to solve the global water storage issue. The potential of π-conjugated polymers as photothermal materials is significant, because their absorption range can be customized through molecular design. In this study, naphthalenediimide (NDI) and thiadiazolobenzotriazole (TBZ) were employed as bifunctional monomers to produce conjugated polymers. There are two types of polymers, P1 and P2. P1 is based on NDI, while P2 is a copolymer of NDI and TBZ in a ratio of 9:1. Both polymers had high molecular weights and sufficient thermal stability. UV-vis-near-infrared (NIR) absorption spectra revealed that both polymers have large extinction coefficients ascribed to the NDI and TBZ chromophores. Notably, the absorption spectrum of P2 exhibited a significant red shift compared to P1, resulting in a narrow optical bandgap and absorption in the NIR range. This result suggested that P2 has a higher light absorption than P1. Photoluminescence (PL) spectra were measured to elucidate the conversion of the absorbed light into thermal energy. It was found that P2 has a reduced fluorescence quantum yield as a result of the TBZ unit, signifying a proficient conversion of the photothermal energy. Based on the results, it appears that the P2 film has a greater photothermal property compared to that of the P1 film. The surface temperature of the P2 film reached approximately 50 °C under the investigated conditions. In addition, copolymer P2 exhibited an impressive SSG efficiency of 72.4% under 1 sun (1000 W/m2) irradiation. All the results suggested that narrow bandgap conjugated polymers containing the TBZ unit are highly effective materials for achieving optimal performance in SSGs.
RESUMO
The mechanical failure of polymers remains challenging to understand and predict, as it often involves highly localised phenomena that cannot be probed with bulk characterisation techniques. Here, we present a generalisable protocol based on optical microscopy, tensile testing, and image processing that permits the spatially resolved interrogation of mechanical deformation at the molecular level around defects in mechanophore-containing polymers. The approach can be applied to a broad range of polymeric materials, mechanophores, and deformation scenarios.
RESUMO
The molecular shuttling function of rotaxanes can be exploited to design mechanoresponsive reporter molecules. Here, we report a new approach to such rotaxane-based mechanophores, in which the fluorescence resonance energy transfer (FRET) between a donor-acceptor pair is mechanically controlled. A cyclic molecule containing a green-light-emitting FRET donor connected to a red-light-emitting FRET acceptor was threaded onto an axle equipped with a quencher at its center and two stoppers in the peripheral positions. In the force-free state, the green emitter is located near the quencher so that charge transfer interactions or photo-induced electron transfer between the two moieties suppress green emission and prevent the FRET from the green to the red emitter. The mechanophore was covalently incorporated into a linear polyurethane-urea (PUU), and stretchable hydrogels were prepared by swelling this polymer with water. Upon deformation of the PUU hydrogels and under an excitation light that selectively excites the donor, the intensity of the red fluorescence increases, as a result of a force-induced separation of the green emitter from the quencher, which enables the FRET. The switching contrast is much more pronounced in the gels than in dry films, which is due to increased molecular mobility and hydrophobic effects in the hydrogel, which both promote the formation of inclusion complexes between the ring containing the green emitter and the quencher.
RESUMO
Mechanochromic mechanophores are reporter molecules that indicate mechanical events through changes of their photophysical properties. Supramolecular mechanophores in which the activation is based on the rearrangement of luminophores and/or quenchers without any covalent bond scission, remain less well investigated. Here, we report a cyclophane-based supramolecular mechanophore that contains a 1,6-bis(phenylethynyl)pyrene luminophore and a pyromellitic diimide quencher. In solution, the blue monomer emission of the luminophore is largely quenched and a faint reddish-orange emission originating from a charge-transfer (CT) complex is observed. A polyurethane elastomer containing the mechanophore displays orange emission in the absence of force, which is dominated by the CT-emission. Mechanical deformation causes a decrease of the CT-emission and an increase of blue monomer emission, due to the spatial separation between the luminophore and quencher. The ratio of the two emission intensities correlates with the applied stress.
RESUMO
Stimuli-responsive polymers are of great interest due to their ability to translate changing environmental conditions into responses in defined materials. One possibility to impart such behavior is the incorporation of optically active molecules into a polymer host. Here, we describe how sensor molecules that consist of a π-extended benzothiadiazole emitter and a naphthalene diimide quencher can be exploited in this context. The two optically active entities were connected via different spacers and, thanks to attractive intramolecular interactions between them, the new sensor molecules assembled into cyclic structures in which the fluorescence was quenched by up to 43% when compared to solutions of the individual dyes. Detailed spectroscopic investigations of the sensor molecules in solution show that the extent of donor/acceptor interactions is influenced by various factors, including solvent polarity and ion concentration. The new sensor molecule was covalently incorporated into a polyurethane; the investigation of the optical characteristics in both the solid and solvent-swollen states indicates that a stimulus-induced formation of associated dye pairs is possible in polymeric materials. Indeed, a solvatochromic quenching effect similar to the behavior in solution was observed for solvent-swollen polymer samples, leading to an effective change of the green emission color of the dye to a yellow color.
RESUMO
Mechanochromic mechanophores permit the design of polymers that indicate mechanical events through optical signals. Here we report rotaxane-based supramolecular mechanophores that display both reversible and irreversible fluorescence changes. These responses are triggered by different forces and are achieved by exploiting the molecular shuttling function and force-induced dethreading of rotaxanes. The new rotaxane mechanophores are composed of a ring featuring a luminophore, which is threaded onto an axle with a matching quencher and two stoppers. In the stress-free state, the luminophore is preferentially located in the proximity of the quencher, and the emission is quenched. The luminophore slides away from the quencher when a force is applied and the fluorescence is switched on. This effect is reversible, unless the force is so high that the luminophore-carrying ring slips past the stopper and dethreading occurs. We show that the combination of judiciously selected ring and stopper moieties is crucial to attain interlocked structures that display such a dual response. PU elastomers that contain such doubly responsive rotaxanes exhibit reversible fluorescence changes over multiple loading-unloading cycles due to the shuttling function, whereas permanent changes are observed upon repeated deformations to high strains due to breakage of the mechanical bond upon dethreading of the ring from the axle. This response allows one, at least conceptually, to monitor the actual deformation of polymer materials and examine mechanical damage that was inflicted in the past on the basis of an optical signal.
RESUMO
A supramolecular mechanophore that can be integrated into polymers and indicates deformation by a fluorescence color change is reported. Two perylene diimides (PDIs) were connected by a short spacer and equipped with peripheral atom transfer polymerization initiators. In the idle state, the motif folds into a loop and its emission is excimer dominated. Poly(methyl acrylate) (PMA) chains were grown from the motif and the mechanophore-containing polymer was blended with unmodified PMA to afford materials that display a visually discernible fluorescence color change upon deformation, which causes the loops to unfold. The response is instant, and correlates linearly with the applied strain. Experiments with a reference polymer containing only one PDI moiety show that looped mechanophores that display intramolecular excimer formation offer considerable advantages over intermolecular dye aggregates, including a concentration-independent response, direct signaling of mechanical processes, and a more pronounced optical change.
RESUMO
A new approach to cyclophane-based supramolecular mechanophores is presented. We report a mechanically responsive cyclic motif that contains two fluorescent 1,6-bis(phenylethynyl)pyrene moieties that are capable of forming intramolecular excimers. The emission spectra of dilute solutions of this cyclophane and a polyurethane elastomer into which a small amount of the mechanophore (0.08 wt %) had been covalently integrated are dominated by excimer emission. Films of the cyclophane-containing polyurethane also display a considerable portion of excimer emission, but upon deformation, the fluorescence becomes monomer-dominated and a perceptible change from cyan to blue is observed. The response is instant, reversible, and consistent with a mechanically induced change of the molecular conformation of the mechanophore so that the excimer-promoting interactions between the luminophores are suppressed. In-depth investigations show a correlation between the applied strain and the emission color, which can conveniently be expressed by the ratio of monomer to excimer emission intensity. The current study suggests that cyclophanes can be utilized to develop various supramolecular mechanophores that detect and visualize weak forces occurring in polymeric materials or generated by living tissues.
Assuntos
Éteres Cíclicos/química , Substâncias Luminescentes/química , Fenômenos Mecânicos , Polímeros/químicaRESUMO
Introduction of functional groups that can form intermolecular hydrogen bonds into highly-emissive luminophores is a promising way to induce mechanochromic luminescence. Herein, we report that a 9,10-bis(phenylethynyl)anthracene derivative featuring two amide groups forms green-emissive crystals based on two-dimensional hydrogen-bonded molecular sheets. Mechanical grinding changed the emission from green to yellow, owing to a transition from a crystalline to an amorphous phase. Infrared spectroscopy revealed that mechanical stimuli disrupted the linear hydrogen-bonding formation. A thermal treatment recovered the original green photoluminescence.
RESUMO
Triphenylamine-benzothiazole derivatives, N-(4-(benzo[d]thiazol-2-yl)phenyl)-N-phenylbenzenamine (1), N-(4-(benzo[d]thiazol-2-yl)-3-methoxyphenyl)-N-phenylbenzenamine (2), and 2-(benzo[d]thiazol-2-yl)-5-(diphenylamino)phenol (3), showed unusual temperature-controlled locally excited (LE) and twisted intramolecular charge-transfer (TICT) state fluorescence switching in polar solvents. The detailed photophysical studies (absorption, fluorescence, lifetime, and quantum yield) in various solvents confirmed polarity-dependent LE and TICT state formation and fluorescence tuning. 1 and 2 exhibited strong fluorescence with short lifetime in nonpolar solvents compared to polar solvents. 1, 2, and 3 in dimethylformamide (DMF) at room temperature showed low-energy weak TICT state fluorescence, whereas high-energy strong LE state fluorescence was observed at -196 °C. Interestingly, further increasing the temperature from 20 to 100 °C, the DMF solution of 1 and 2 exhibited rare fluorescence enhancement with a slight blue shift of λmax via activating more vibrational bands of the TICT state. Thus, 1 and 2 showed weak TICT state fluorescence at room temperature, strong LE state fluorescence at -196 °C, and activation of TICT state at 100 °C. Moreover, molecular conformation and aggregation in the solid state influenced strongly on the fluorescence properties of 1, 2, and 3. Solid-state fluorescence and pH-responsive imidazole nitrogen have been exploited for demonstrating halochromism-induced fluorescence switching. Computational studies provided further insights into the fluorescence tuning and switching. The present studies provide understanding and opportunity to make use of D-A organic molecules in the LE and TICT states for achieving fluorescence switching and tuning.
RESUMO
A red light-emitting photoluminescent supramolecular mechanophore based on an interlocked molecular motif is presented. The rotaxane-based mechanophore contains a cyclic compound featuring a π-extended 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dye as a red emitter that was threaded onto a dumbbell-shaped molecule containing an electron-poor 1,4,5,8-naphthalenetetracarboxylic diimide quencher at its center. Through two aliphatic hydroxyl groups attached to the dumbbell and the cycle, the mechanophore was covalently embedded into the backbone of a thermoplastic polyurethane elastomer. The mechanophore is only weakly photoluminescent in solution, indicating that the BODIPY's emission is efficiently quenched. Solution-cast films of the rotaxane-containing polymer, by contrast, show an appreciable photoluminescence, which suggests that during film formation, some of the emitting cycles are trapped in positions away from the quencher. Interestingly, the emission intensity could be significantly reduced by swelling the films with an organic solvent and the emission increased again upon drying, suggesting that such solvent plasticization causes a reversible rearrangement. In both dry and solvent-swollen films, uniaxial deformation caused a significant, reversible increase of the emission intensity, on account of mechanically induced shuttling of the emitters away from and back to the quenchers. It is shown that the properties of the polymer can be tuned by the solvent, and that such plasticizing extends the small palette of approaches that allow modification of the activation stress of a given material system.
RESUMO
Three mechanoresponsive polyurethane elastomers whose blue, green, and orange photoluminescence can be reversibly turned on by mechanical force were prepared and combined to create a blend that exhibits deformation-induced white photoluminescence. The three polyurethanes contain rotaxane-based supramolecular mechanoluminophores based on π-extended pyrene, anthracene, or 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) luminophores, respectively, and 1,4,5,8-naphthalenetetracarboxylic diimide as an electronically matched quencher. Each polymer shows instantly reversible, strain-dependent switching of its photoluminescence intensity when stretched and relaxed, as deformation leads to a spatial separation of the luminophore and quencher. The present study shows that the photoluminescence color can easily be tailored by variation of the luminophore and also by combining several mechanophores in one material and demonstrates that adaptability is a key advantage of supramolecular approaches to create mechanoresponsive polymers.
RESUMO
While coupling mechanical and chemical processes is widespread in living organisms, the idea to harness the mechanically induced dissociation of weak covalent and non-covalent bonds to create artificial materials that respond to mechanical stimulation has only recently gained attention. Here we summarize our activities that mainly revolve around the exploitation of non-covalent interactions in (supramolecular) polymeric materials with the goal to translate mechanical stresses into useful, pre-defined events. Focusing on mechano- chromic polymers that alter their optical absorption or fluorescence properties, several new operating principles, mechanosensitive entities, and materials systems were developed. Such materials are expected to be useful for technical applications that range from the detection of very small forces in biological systems to the monitoring of degradation processes and damage in coatings and structural objects.
RESUMO
The mechanoresponsive behavior and photochemical response of a new bis(cyanostyryl)benzene fluorophore (CSB-5) were investigated. Green fluorescence with λem,max of 507â nm was found for CSB-5 in chloroform solution, mirroring the behavior of a previously reported similar dye (CSB-6). Alternatively, crystalline samples of CSB-5 exhibited orange fluorescence with λem,max of 620â nm, attributable to excimer emission. Although the emission color change was not clearly noticeable by naked eye, CSB-5 exhibited mechanochromic luminescence, due to transformation into the amorphous state upon grinding the crystalline powder. Interestingly, rubbed films of CSB-5 prepared on glass substrates exhibited a pronounced emission color change from orange to green when exposed to UV light. This response is the result of a photochemical reaction that occurs in the amorphous state and which causes a decrease of the excimer emission sites so that the emission color changes from excimer to monomer. The crystalline material did not display such a photoinduced emission color change and the difference in photochemical reactivity between crystalline and amorphous states was exploited to pattern the emission color of rubbed films.
RESUMO
A well-known approach toward mechanochromic polymers relies on the incorporation of excimer-forming fluorophores into a matrix polymer and the disruption of aggregated chromophores when such materials undergo macroscopic mechanical deformation. However, the required aggregates and stress-transfer processes have so far only been realized with select dye/polymer combinations. As demonstrated here, the utility of this approach can be extended by tethering an excimer-forming cyano-substituted oligo(p-phenylene vinylene) fluorophore to the two ends of a telechelic poly(ethylene-co-butylene) and blending small amounts (0.1-2 wt%) of the resulting aggregachromic macromolecule into polymer matrices such as poly(ε-caprolactone), poly(isoprene), or poly(styrene-b-butadiene-b-styrene). All blends display mechanofluorochromic responses, and the ratio between the monomer and excimer emission intensities can be used to correlate the luminescence signal to the extent of deformation and to follow subsequent relaxation processes. The developed approach significantly expands the scope of blend-based mechanoresponsive luminescent materials.
Assuntos
Substâncias Luminescentes/química , Polímeros/química , Substâncias Macromoleculares/química , Fenômenos Mecânicos , Estrutura MolecularRESUMO
Molecular photoswitching, light induced reversible color/fluorescence modulation, has mostly been realized in organic molecules via E/Z isomerization of azobenzenes and stilbenes and ring opening/closing reactions of spiropyrans and diarylethenes. We report here new fluorescent molecular photoswitches based on triphenylamine (TPA)-imidazole derivatives, N-phenyl-N-(4-(1,4,5-triphenyl-1H-imidazol-2-yl)phenyl)benzenamine (NTPB) and N-phenyl-N-(4-(1-phenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)benzenamine (NPPB), that exhibited light induced reversible fluorescence switching via conformational change from a twisted molecular structure to more planar. NTPB and NPPB in CHCl3 showed red shift of absorption and fluorescence upon UV light irradiation whereas white light exposure reversed both absorption as well as fluorescence. The role of the TPA-imidazole twisted molecular structure in photoswitching was established based on structure property, computational and photophysical studies. The isobestic point observed in time dependent fluorescence change under UV light irradiation clearly demonstrated the presence of two different conformational isomers. Interestingly, polymorphism and torsion angle (τ) dependent fluorescence of NTPB and NPPB in the solid state also supported the role of the twisted molecular structure of TPA-imidazole in fluorescence switching/tuning. Interestingly, NTPB showed fluorescence photoswitching in the solid state also whereas rigid phenanthrene based NPPB did not show fluorescence photoswitching. Thus the present studies provide structural insight for designing a new type of fluorescent organic molecular photoswitches based on conformational modulation that could be of potential interest in optoelectronic devices.