Comparison of the Effect of Kaolin and Bentonite Clay (Raw, Acid-Treated, and Metal-Impregnated) on the Pyrolysis of Waste Tire.

This study investigates the effectiveness of kaolin and bentonite catalysts in improving liquid hydrocarbon yields during the pyrolysis of waste tires. Raw clay, nitric acid-treated clay, and mono- or bimetal-impregnated clay were used as catalysts in the pyrolysis of waste tire. Acid-treated kaolin produced a higher yield of liquid hydrocarbons (43.24-47%) compared to acid-treated bentonite (35.34-41.85%). This improvement in the liquid yield can be attributed to the higher specific surface area and pore diameter of the acid-treated clay in comparison to raw kaolin (39.48%) and raw bentonite (31.62%). Moreover, the use of metal-impregnated catalysts, such as Fe/kaolin and Ni/Fe/kaolin, resulted in higher liquid yields (47%) compared to the 3 M HNO3-treated kaolin catalyst (43.24%). Gas chromatography-mass spectrometry (GC-MS) analysis confirmed the presence of limonene, a crucial ingredient for commercial perfume production, in the liquid products. The calorific values of oil obtained through kaolin and bentonite catalysis were measured at 13,922 and 10,174 kcal/kg, respectively, further highlighting the potential of these catalysts in waste tire valorization.

Molecular Cloning, In Silico Analysis, and Characterization of a Novel Cellulose Microfibril Swelling Gene Isolated from Bacillus sp. Strain AY8.

A novel cellulose microfibril swelling (Cms) gene of Bacillus sp. AY8 was successfully cloned and sequenced using a set of primers designed based on the conserved region of the gene from the genomic database. The molecular cloning of the Cms gene revealed that the gene consisted of 679 bp sequences encoding 225 amino acids. Further in silico analysis unveiled that the Cms gene contained the NlpC/P60 conserved region that exhibited a homology of 98% with the NlpC/P60 family proteins found in both the strains, Burkholderialata sp. and Burkholderia vietnamiensis. The recombinant Cms enzyme had a significant impact on the reduction of crystallinity indices (CrI) of various substrates including a 3%, a 3.97%, a 4.66%, and a substantial 14.07% for filter paper, defatted cotton fiber, avicel, and alpha cellulose, respectively. Additionally, notable changes in the spectral features were observed among the substrates treated with recombinant Cms enzymes compared to the untreated control. Specifically, there was a decrease in band intensities within the spectral regions of 3000-3450 cm-1, 2900 cm-1, 1429 cm-1, and 1371 cm-1 for the treated filter paper, cotton fiber, avicel, and alpha cellulose, respectively. Furthermore, the recombinant Cms enzyme exhibited a maximum cellulose swelling activity at a pH of 7.0 along with a temperature of 40 °C. The molecular docking data revealed that ligand molecules, such as cellobiose, dextrin, maltose 1-phosphate, and feruloyated xyloglucan, effectively bonded to the active site of the Cms enzyme. The molecular dynamics simulations of the Cms enzyme displayed stable interactions with cellobiose and dextrin molecules up to 100 ns. It is noteworthy to mention that the conserved region of the Cms enzyme did not match with those of the bioadditives like expansins and swollenin proteins. This study is the initial report of a bacterial cellulose microfibril swellase enzyme, which could potentially serve as an additive to enhance biofuel production by releasing fermentable sugars from cellulose.

Theoretical and Experimental Studies of Hydrogen Bonded Dihydroxybenzene Isomers Polyurethane Adhesive Material.

Hydrogen bonding in polyurethane (PU) is imposed by molecular parameters. In this study, the effect of structural isomerism of certain monomers on hydrogen bonding of waterborne polyurethane (WBPU) was studied theoretically and experimentally. Two dihydroxybenzene (DHB)-based structural isomers such as catechol (CC) and hydroquinone (HQ), with different OH positions on the inner benzene core, had been used. Two series of WBPU dispersions were prepared using CC and HQ with defined contents. The binding energies between the catechol (CC)/hydroquinone (HQ) (respective OH group) and urethane/urea were calculated theoretically. By using a density functional theory (DFT) method, it was found that the largest binding energy between the urea and CC was higher than that of urea and HQ. The FT-IR analysis of synthesized polymer was also carried out to compare the results with the theoretical values. The CC-based polymers showed a stronger hydrogen bond both theoretically and experimentally than those for HQ-based polymers. The higher level of hydrogen bond was reflected in their properties of CC-based polymers. The adhesive strength, thermal stability, and hydrophobicity were higher for CC-based materials than those for HQ-based materials. The adhesive strength was increased 25% with the addition of 2.0 wt% CC content. This adhesive strength slightly deviated at a moderately high temperature of 80 °C.

Electrode surface modification of graphene-MnO2 supercapacitors using molecular dynamics simulations.

In this study, molecular dynamics (MD) simulations have been performed to explore the variation of ion density and electric potential due to electrode surface modification. Two different surface morphologies, having planer and slit pore with different conditions of surface charge, have been studied for graphene-MnO2 surface using LAMMPS. For different pore widths, the concentration of ions in the double layer is observed to be very low when the surface of the graphene-MnO2 electrode is charged. With a view to identify the optimal pore size for the simulation domain considered, three different widths for the nano-slit type pores and the corresponding ion-ion interactions are examined. Though this effect is negligible for pores with 9.23 and 3.55 Å widths, a considerable increase in the ionic concentration within the 7.10 Å pores is observed when the electrode is kept neutral. The edge region of these nano-slit pores leads to effective energy storage by promoting ion separation and a significantly higher charge accumulation is found to occur on the edges compared to the basal planes. For the simulation domain of the present study, partition coefficient is maximum for a pore size of 7.10 Å, indicating that the ions' penetration and movement into nano-slit pores are most favorable for this optimum pore size for MnO2-graphene electrodes with aqueous NaCl electrolyte. Graphical Abstract The importance of understanding the commercial feasibility of supercapacitor material has made qualitatively predicting the optimized electrode structure one of the main targets of energy related researches. While great progress has been made in recent years, a coherent theoretical picture of the optimized electrode structure remains elusive. This article discusses the most favorable design of supercapacitor electrode for ion-electrode interaction.

Thermal Effect on Positive Patterned Self-Assembled Monolayer Grown from a Droplet of Alkanethiol.

Atomic force microscope technique is widely used for the spatial narrow deposition of molecules inside the bare space of preexisting self-assembled monolayer (SAM) matrix. Using molecular dynamics simulation, we studied the formation of positively patterned SAM from a globule of 1-octadecanethiol (ODT) on predesigned SAM matrix of 1-dodecanethiol (DDT) and effect of temperature on it. The alkyl chains of ODT SAM were densely packed and ordered by means of chemisorption through sulfur atoms. The circular SAM of ODT contained defects due to the molecules those were standing upside down or trapped inside ODT SAM. We found that with the increase of temperature, these defects moved out by flipping of inverted ODT molecules or building spaces to be adsorbed on Au surface. The ODT molecules on the top of the pile of stable circular SAM or those are upside down and trapped disperse in a unique fashion namely serial pushing through which molecules firstly make a free space to enter inside the adsorbed thiol molecules and then push neighboring molecules to get enough space to be adsorbed on the gold surface. The stability of ODT SAM was confirmed by analyzing different structural properties such as tilt angle, tilt orientation. and backbone orientation. We also calculated the diffusion coefficient of the ODT molecules which were on the top of SAM island. © 2019 Wiley Periodicals, Inc.

Gold nanoparticle silica nanopeapods.

A subnanometer gap-separated linear chain gold nanoparticle (AuNP) silica nanotube peapod (SNTP) was fabricated by self-assembly. The geometrical configurations of the AuNPs inside the SNTPs were managed in order to pose either a single-line or a double-line nanostructure by controlling the diameters of the AuNPs and the orifice in the silica nanotubes (SNTs). The AuNPs were internalized and self-assembled linearly inside the SNTs by capillary force using a repeated wet-dry process on a rocking plate. Transmission electron microscopy (TEM) images clearly indicated that numerous nanogap junctions with sub-1-nm distances were formed among AuNPs inside SNTs. Finite-dimension time domain (FDTD) calculations were performed to estimate the electric field enhancements. Polarization-dependent surface-enhanced Raman scattering (SERS) spectra of bifunctional aromatic linker p-mercaptobenzoic acid (p-MBA)-coated AuNP-embedded SNTs supported the linearly aligned nanogaps. We could demonstrate a silica wall-protected nanopeapod sensor with single nanotube sensitivity. SNTPs have potential application to intracellular pH sensors after endocytosis in mammalian cells for practical purposes. The TEM images indicated that the nanogaps were preserved inside the cellular constituents. SNTPs exhibited superior quality SERS spectra in vivo due to well-sustained nanogap junctions inside the SNTs, when compared to simply using AuNPs without any silica encapsulation. By using these SNTPs, a robust intracellular optical pH sensor could be developed with the advantage of the sustained nanogaps, due to silica wall-protection.

Monte Carlo study on the self-assembly of nanoparticles into a nanorod structure.

It is well known that semiconductor nanoparticles (NPs) can assemble into a range of low dimensional structures, such as nanowires, nanorods and nanosheets. In this study, we investigate the self-assembly of CdTe NPs by using Monte Carlo simulation. Using a simple model for the anisotropic interaction of NPs, the present Monte Carlo simulation demonstrated that NPs with large dipole moments assemble spontaneously into a nanorod even if the short range interactions among NPs is isotropic. Interestingly, we found that the present nanorod grew by forming a transient structure which looks similar to a double ring. For NPs similar to CdTe, the dipole-dipole interaction had a dominant effect over van der Waals attractions and steric repulsion on the final structure of the NP aggregates. The simulated rods are similar to those observed in the experimental self-assembly of CdTe NPs. The NPs with relatively small electric dipole moments aggregated into more or less isotropic structures.

Deformation of carbon nanotubes colliding with a silicon surface and its dependence on temperature.

Using molecular dynamics simulation, we investigated the carbon nanotubes (CNTs) colliding with a silicon surface at a speed of 600 m/s, mimicking cold spray experiments of CNTs. Depending on temperature (300-900 K), the CNT is deposited on or bounces off the surface after impact on the surface. The CNT was more deformed as its temperature rose. The deformation of CNT was maximal for the collision geometry where the long axis of CNT lies parallel to the surface plane. However, its vibrational energy was maximal when the CNT collided with its long axis perpendicular to the surface.

Molecular simulation of the water meniscus in dip-pen nanolithography.

We report a molecular dynamics simulation of the nanometer water meniscus formed in dip-pen nanolithography (DPN). When an atomic force microscope tip is in contact with a surface, the meniscus is significantly asymmetric around the tip axis. The meniscus as a whole can move away from the tip axis due to surface diffusion. The structure of the meniscus fluctuates and its periphery has a finite thickness as large as 25% of its width. We simulated the transport of nonpolar hydrophobic molecules through a water meniscus. Molecules move on the surface of, not dissolving into the interior of, the meniscus. As a result, an annular pattern forms in DPN. Even if the meniscus is cylindrically symmetric, the molecular flow from the tip and the subsequent pattern growth on the surface are anisotropic at the nanosecond timescale.