Enhancing surgical occlusion setting in orthognathic surgery planning using mixed reality technology: a comparative study.

OBJECTIVES: Orthognathic surgery necessitates precise occlusal alignment during surgical planning, traditionally achieved through manual alignment of physical dental models as the recognized gold standard. This study aims to evaluate the efficacy of mixed reality technology in enhancing surgical occlusion setting compared to traditional physical alignment and an established virtual method, addressing the research question: Can mixed reality technology improve the accuracy and efficiency of occlusion setting in orthognathic surgery planning? MATERIALS & METHODS: This experimental study compared the surgical occlusion settings of 30 orthognathic cases using three methods: a new virtual method with mixed reality technology, the traditional gold standard of physical alignment, and an established virtual occlusion method using the IPS Case Designer (KLS Martin SE & Co. KG, Tuttlingen, Germany). RESULTS: Results indicated that surgical occlusions set with mixed reality technology were comparable to the conventional method in terms of maxillary movement and occlusal relationship. Differences observed were within the inter-observer variability of the gold standard. Both virtual methods tended to position the maxilla more anteriorly, resulting in fewer occlusal contacts. However, virtual occlusion demonstrated clinical applicability, achieving an average of 11 occlusal contacts with a bilaterally symmetrical distribution along the dental arch. CONCLUSIONS: The mixed reality environment provides an intuitive and flexible experience for setting surgical occlusion, eliminating the need for costly 3D-printed physical models or the automatic calculations required by other virtual occlusion methods, thereby offering maximum freedom. CLINICAL RELEVANCE: As a novel form of virtual occlusion, it presents a comprehensive tool that contributes to a timely and cost-effective full digital workflow of orthognathic surgery planning.

3-Dimensional accuracy of navigation-guided bimaxillary orthognathic surgery: A systematic review and meta-analysis.

The transfer of a virtual orthognathic surgical plan to the patient still relies on the use of occlusal splints, which have limitations for vertical positioning of the maxilla. The use of real-time navigation has been proposed to enhance surgical accuracy. This systematic review (PROSPERO CRD42024497588) aimed to investigate if surgical navigation can improve the three-dimensional accuracy of orthognathic surgery. The inclusion criteria were orthognathic surgery, use of intra-operative navigation and quantitative assessment of surgical accuracy. The exclusion criteria were non-bimaxillary orthognathic surgeries, non-clinical studies, studies without post-operative 3D analysis and publications not in the English language. A search of PubMed, Embase and Cochrane Library generated 940 records, of which 12 were found relevant. Risk of bias was assessed done using the Joanna Briggs Institute Critical Appraisal Checklist Tool. Among the included studies, there were nine of observational character and three randomized control studies (RCTs). All studies demonstrated promising outcomes with reported good surgical accuracy within a 2 mm difference between the planned and post-surgical result. Meta-analysis of two RCTs was carried out and results were in favor of surgical navigation with a total odds ratio of 4.44 [2.11, 9.37] and an overall effect outcome of Z = 3.92 (p < 0.0001). Navigation was up to 0.60 mm more accurate than occlusal wafers only (p < 0.001). However, there were variations in the application of surgical navigation and methods of analysis, leading to a heterogenous data set. Future studies should focus on standardized protocols and analysis methods to further validate the use of surgical navigation in orthognathic surgery. Despite some limitations, surgical navigation shows potential as a valuable tool in improving the accuracy of orthognathic surgery.

Intraoral Scanning Enables Virtual-Splint-Based Non-Invasive Registration Protocol for Maxillofacial Surgical Navigation.

Background/Objectives: Surgical navigation has advanced maxillofacial surgery since the 1990s, bringing benefits for various indications. Traditional registration methods use fiducial markers that are either invasively bone-anchored or attached to a dental vacuum splint and offer high accuracy but necessitate additional imaging with increased radiation exposure. We propose a novel, non-invasive registration protocol using a CAD/CAM dental splint based on high-resolution intraoral scans. Methods: The effectiveness of this method was experimentally evaluated with an ex vivo 3D-printed skull measuring the target registration error (TRE). Surgical application is demonstrated in two clinical cases. Results: In the ex vivo model, the new CAD/CAM-splint-based method achieved a mean TRE across the whole facial skull of 0.97 ± 0.29 mm, which was comparable to traditional techniques like using bone-anchored screws (1.02 ± 0.23 mm) and dental vacuum splints (1.01 ± 0.33 mm), while dental anatomical landmarks showed a lower accuracy with a mean TRE of 1.84 ± 0.44 mm. Multifactorial ANOVA confirmed significant differences in TRE based on the registration method and the navigated level of the facial skull (p < 0.001). In clinical applications, the presented method demonstrated high accuracy for both midfacial and mandibular surgeries. Conclusions: Our results suggest that this non-invasive CAD/CAM-splint-based method is a viable alternative to traditional fiducial marker techniques, with the potential for broad application in maxillofacial surgery. This approach retains high accuracy while eliminating the need for supplementary imaging and reduces patient radiation exposure. Further clinical trials are necessary to confirm these findings and optimize splint design for enhanced navigational accuracy.

A New Approach to Virtual Occlusion in Orthognathic Surgery Planning Using Mixed Reality-A Technical Note and Review of the Literature.

Orthognathic surgery plays a vital role in correcting various skeletal discrepancies of the maxillofacial region. Achieving optimal occlusion is a fundamental aspect of orthognathic surgery planning, as it directly influences postoperative outcomes and patient satisfaction. Traditional methods for setting final occlusion involve the use of dental casts which are time-consuming, prone to errors and cannot be easily shared among collaborating specialties. In recent years, advancements in digital technology have introduced innovative approaches, such as virtual occlusion, which may offer enhanced accuracy and efficiency in orthognathic surgery planning. Furthermore, the emergence of mixed reality devices and their 3D visualization capabilities have brought about novel benefits in the medical field, particularly in computer-assisted planning. This paper presents for the first time a prototype tool for setting virtual occlusion during orthognathic surgery planning using mixed reality technology. A complete walkthrough of the workflow is presented including an explanation of the implicit advantages of this novel tool. The new approach to defining virtual occlusion is set into context with other published methods of virtual occlusion setting, discussing advantages and limitations as well as concepts of surgical occlusion for orthognathic surgery.

Virtual surgical planning in orthognathic surgery: a dental hospital's 10-year experience.

PURPOSE: The primary objective of this study was to evaluate how the utilization of virtual surgical planning (VSP) and the epidemiological profile of patients undergoing orthognathic surgery (OGS) have changed in the past decade. METHODS: The records of patients who had undergone orthognathic surgery at a national dental hospital were reviewed. Trends in VSP, epidemiological data, presentation of dentofacial deformity, and management details were recorded. RESULTS: A total of 1184 patients were included in this study. The majority of the patients seeking treatment in this dental hospital were young Chinese adults with dentofacial deformities requiring bimaxillary surgeries. Most patients presented with a skeletal Class III pattern (79.0%), and asymmetry was diagnosed in 80.8% of all cases. CONCLUSION: There was an initial slow pick-up rate for VSP, but this rapidly increased to a high adoption rate of 98.7-100% between 2019 and 2021. Together with an increasing body of evidence suggesting greater accuracy in VSP, utilization in this technology can be enhanced with greater familiarity with the technology and improvements in the VSP services.

Alveolar Ridge Augmentation with a Novel Combination of 3D-Printed Scaffolds and Adipose-Derived Mesenchymal Stem Cells-A Pilot Study in Pigs.

Alveolar ridge augmentation is an important dental procedure to increase the volume of bone tissue in the alveolar ridge before the installation of a dental implant. To meet the high demand for bone grafts for alveolar ridge augmentation and to overcome the limitations of autogenous bone, allografts, and xenografts, researchers are developing bone grafts from synthetic materials using novel fabrication techniques such as 3D printing. To improve the clinical performance of synthetic bone grafts, stem cells with osteogenic differentiation capability can be loaded into the grafts. In this pilot study, we propose a novel bone graft which combines a 3D-printed polycaprolactone-tricalcium phosphate (PCL-TCP) scaffold with adipose-derived mesenchymal stem cells (AD-MSCs) that can be harvested, processed and implanted within the alveolar ridge augmentation surgery. We evaluated the novel bone graft in a porcine lateral alveolar defect model. Radiographic analysis revealed that the addition of AD-MSCs to the PCL-TCP scaffold improved the bone volume in the defect from 18.6% to 28.7% after 3 months of healing. Histological analysis showed the presence of AD-MSCs in the PCL-TCP scaffold led to better formation of new bone and less likelihood of fibrous encapsulation of the scaffold. Our pilot study demonstrated that the loading of AD-MSCs improved the bone regeneration capability of PCL-TCP scaffolds, and our novel bone graft is suitable for alveolar ridge augmentation.

Accuracy of conventional versus cone-beam CT-synthesised lateral cephalograms for cephalometric analysis: A systematic review.

OBJECTIVE: To assess the accuracy of cone-beam computed tomography (CBCT)-synthesised lateral cephalograms (CSLCs) compared with conventional lateral cephalograms for cephalometric analysis in human participants and skull models. METHODS: The authors performed a search of PubMed, Scopus, Google Scholar and Embase databases on 4 October 2021. Included studies met the following criteria: published in English; compared conventional lateral cephalograms and CSLCs; assessed hard- and soft-tissue landmarks; and were performed on human or skull models. Data extraction from eligible studies was performed by two independent reviewers. The quality of evidence was assessed using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist tool - diagnostic accuracy studies. RESULTS: A total of 20 eligible articles were included in this systematic review. Of these 20 studies, 17 presented with a low risk of bias, while three were found to have a moderate risk of bias. Hard- and soft-tissue analyses were evaluated for each imaging modality. The findings reveal that CSLCs are accurate and comparable to conventional lateral cephalograms for cephalometric analysis and demonstrate good inter-observer reliability. Four studies reported a higher accuracy with CSLCs. CONCLUSION: Overall, the diagnostic accuracy and reproducibility of CSLCs were comparable to conventional lateral cephalograms in cephalometric analysis. It is justified that patients who have an existing CBCT scan do not need an additional lateral cephalogram, minimising unnecessary radiation exposure, expenses and time for the patient. Larger voxel sizes and low-dose CBCT protocols can be considered to minimise radiation exposure. REGISTRATION: This study was registered with PROSPERO (CRD42021282019).

Is there a comorbid relationship between temporomandibular disorders and otologic signs/symptoms?: An umbrella review.

OBJECTIVE: This umbrella review (UR) explored the possible associations between temporomandibular disorders (TMDs) and otologic signs/symptoms (OSs) and established the potential impact of TMD interventions on OSs. METHODS: A systematic review of systematic reviews (SRs)/meta-analyses (MAs) was conducted according to the PRISMA guidelines and Joanna Briggs Institute UR protocol. Electronic search of the PubMed, Scopus, Web of Science, and Open Grey databases was conducted and the quality of the identified studies was assessed using the AMSTAR2 criteria. RESULTS: Out of 923 and 157 articles screened for the first and second focus questions respectively, a total of 8 SRs/MAs fulfilled the eligibility criteria. The prevalence of OSs in TMD patients and contrariwise varied substantially up to 85.0-95.0%. Available evidence indicates that TMDs are associated with OSs, and TMD treatment reduced OSs. CONCLUSION: Findings suggest that a comorbid relationship between TMDs and OSs exists, and therapeutic TMD interventions improve OSs.

A Porcine Model Using Adipose Stem Cell-Loaded Scaffolds for Alveolar Ridge Augmentation.

Tooth loss greatly affects a person's quality of life and many turn to dental implants to replace lost teeth. The success of a dental implant depends on the amount of alveolar bone supporting the implant, and thus, bone augmentation is often necessary to preserve or build up bone volume in the alveolar ridge. Bone can be augmented with autogenous bone, allografts, or xenografts, but the limitations of such natural bone grafts prompt researchers to develop synthetic scaffolds supplemented with cells and/or bioactive agents as alternative bone grafts. The translation of these combination scaffolds from the laboratory to the clinic requires reliable experimental models that can simulate the clinical conditions in human patients. In this article, we describe the use of a porcine alveolar defect model as a platform to evaluate the efficacy of a novel combination of a three-dimensional-printed polycaprolactone-tricalcium phosphate (PCL-TCP) scaffold and adipose-derived mesenchymal stem cells (AD-MSCs) in lateral alveolar augmentation. The surgical protocol for the defect creation and regenerative surgery, as well as analytical methods to determine the extent of tissue regeneration, are described and discussed.

In Vivo Efficacy of Neutrophil-Mediated Bone Regeneration Using a Rabbit Calvarial Defect Model.

Reconstruction of bone due to surgical removal or disease-related bony defects is a clinical challenge. It is known that the immune system exerts positive immunomodulatory effects on tissue repair and regeneration. In this study, we evaluated the in vivo efficacy of autologous neutrophils on bone regeneration using a rabbit calvarial defect model. Methods: Twelve rabbits, each with two surgically created calvarial bone defects (10 mm diameter), were randomly divided into two groups; (i) single application of neutrophils (SA-NP) vs. SA-NP control, and (ii) repetitive application of neutrophils (RA-NP) vs. RA-NP control. The animals were euthanized at 4 and 8 weeks post-operatively and the treatment outcomes were evaluated by micro-computed tomography, histology, and histomorphometric analyses. Results: The micro-CT analysis showed a significantly higher bone volume fraction (bone volume/total volume) in the neutrophil-treated groups, i.e., median interquartile range (IQR) SA-NP (18) and RA-NP (24), compared with the untreated controls, i.e., SA-NP (7) and RA-NP (14) at 4 weeks (p < 0.05). Similarly, new bone area fraction (bone area/total area) was significantly higher in neutrophil-treated groups at 4 weeks (p < 0.05). Both SA-NP and RA-NP had a considerably higher bone volume and bone area at 8 weeks, although the difference was not statistically significant. In addition, immunohistochemical analysis at 8 weeks revealed a higher expression of osteocalcin in both SA-NP and RA-NP groups. Conclusions: The present study provides first hand evidence that autologous neutrophils may have a positive effect on promoting new bone formation. Future studies should be performed with a larger sample size in non-human primate models. If proven feasible, this new promising strategy could bring clinical benefits for bone defects to the field of oral and maxillofacial surgery.

Collagen sponge functionalized with chimeric anti-BMP-2 monoclonal antibody mediates repair of nonunion tibia defects in a nonhuman primate model: An exploratory study.

Recombinant human bone morphogenetic protein (BMP)-2 is an FDA-approved therapy for nonunion tibia fracture, though it has a number of biological and practical disadvantages. Our research group has developed a novel tissue engineering strategy termed antibody-mediated osseous regeneration. This entails application of anti-BMP-2 monoclonal antibodies (mAbs) to capture endogenous BMP's to mediate in vivo bone formation. This has been documented in a number of animal models. The present exploratory study sought to investigate the application of antibody-mediated osseous regeneration for repair of nonunion tibia defect in a nonhuman primate model. A 20 mm segmental osteotomy was performed in tibia of 6 Macaca fascicularis and was implanted with absorbable collagen sponge that was functionalized with chimeric anti-BMP-2 or isotype matched control mAb. Cone beam computed tomography (CBCT), histologic and histomorphometric analyses were performed 12 weeks post-operatively. CBCT analyzed by quantitative 3D volumetric analysis revealed that sites implanted with absorbable collagen sponge functionalized with anti-BMP-2 mAb demonstrated numerically higher mineralized tissue (408 ± 127 mm3) compared with sites implanted with isotype matched control mAb (214 ± 81 mm3), though the difference was not statistically significant ( p = 0.09). Histologic and histomorphometric analysis showed de novo bone formation with greater ( p < 0.01) percentage of bone volume in sites implanted with anti-BMP-2 (41.3 ± 4.4%), compared with isotype matched control mAb (14.6 ± 5.6%). Results from the present exploratory study provide evidence for the potential of anti-BMP-2 mAb to mediate repair of a large segmental tibia defects in a nonhuman primate model. Therapeutic antibodies have generally been shown to have great safety and efficacy profile, though their application in tissue engineering has been limited in the past. Following further investigation, anti-BMP-2 mAbs immobilized on appropriate scaffold may have application in repair of large skeletal defects without the need for exogenous growth factors.

Collagen Sponge Functionalized with Chimeric Anti-BMP-2 Monoclonal Antibody Mediates Repair of Critical-Size Mandibular Continuity Defects in a Nonhuman Primate Model.

Antibody-mediated osseous regeneration (AMOR) has been introduced by our research group as a tissue engineering approach to capture of endogenous growth factors through the application of specific monoclonal antibodies (mAbs) immobilized on a scaffold. Specifically, anti-Bone Morphogenetic Protein- (BMP-) 2 mAbs have been demonstrated to be efficacious in mediating bone repair in a number of bone defects. The present study sought to investigate the application of AMOR for repair of mandibular continuity defect in nonhuman primates. Critical-sized mandibular continuity defects were created in Macaca fascicularis locally implanted with absorbable collagen sponges (ACS) functionalized with chimeric anti-BMP-2 mAb or isotype control mAb. 2D and 3D analysis of cone beam computed tomography (CBCT) imaging demonstrated increased bone density and volume observed within mandibular continuity defects implanted with collagen scaffolds functionalized with anti-BMP-2 mAb, compared with isotype-matched control mAb. Both CBCT imaging and histologic examination demonstrated de novo bone formation that was in direct apposition to the margins of the resected bone. It is hypothesized that bone injury may be necessary for AMOR. This is evidenced by de novo bone formation adjacent to resected bone margins, which may be the source of endogenous BMPs captured by anti-BMP-2 mAb, in turn mediating bone repair.

Erratum to "Collagen Sponge Functionalized with Chimeric Anti-BMP-2 Monoclonal Antibody Mediates Repair of Critical-Size Mandibular Continuity Defects in a Nonhuman Primate Model".

[This corrects the article DOI: 10.1155/2017/8094152.].