Mechanical properties, sustained release, and oxygen scavenging properties of nanocomposite films loaded with bimetallic nanoparticles (Fe2O3/TiO2) in extra virgin olive oil.

The aim of this study was the synthesis of bimetallic nanoparticles based on Fe2O3/TiO2 and its use in the poly(lactic acid) (PLA) films as an oxygen scavenger in extra virgin olive oil (EVOO) packaging. Bimetallic nanocomposites were prepared by two different precipitation methods (precipitation with ammonia and sodium hydroxide). The characteristics of bimetallic nanoparticles precipitated with sodium hydroxide (Na-Ti0.01Fe0.048O0.08) and bimetallic nanoparticles precipitated with ammonia (NH-Ti0.01Fe0.022O0.09) were compared. Relative amounts of elements in bimetallic nanocomposites and their morphological characteristics were determined using field emission scanning electron microscopy coupled with energy-dispersive X-ray spectrometer. Porosity volume and surface area of bimetallic nanoparticles were calculated using adsorption-desorption isotherms and the Brunauer-Emmett-Teller method. The formation/characterization of bimetallic nanoparticles and their location in the matrix of PLA-based nanocomposite film was studied using X-ray diffraction and Fourier transform infrared. In nanocomposite films based on PLA, bimetallic nanoparticles lead to better oxidative stability (peroxide value, p-anisidine index, K232, and K270) of the EVOO and oxygen scavenging during storage compared to free nanoparticles. Mechanical properties of nanocomposite films were improved due to bimetallic nanoparticles, which were better for Na-Ti0.01Fe0.048O0.08. In vitro release modeling of the bimetallic nanoparticles in EVOO proved that Fickian diffusion is the dominant mechanism, and the Peleg model was the best description of the release behavior of nanoparticles.

Improving biomass and carbohydrate production of microalgae in the rotating cultivation system on natural carriers.

Biofilm-based algal technologies have gained popularity due to higher biomass productivity, efficient harvesting, and water-saving over suspended growth systems. A rotating attached system was designed to assess the biofilm-forming capacity of different isolated microalgal strains from the Persian Gulf. Four microalgal strains, including two Chlorella sp., one Picochlorum sp. and one filamentous cyanobacterium Desmonostoc sp. were cultivated on four carriers: jute, cotton, yarn and nylon. The carriers' physicochemical surface characteristics and attachment effects, like contact angle, were investigated. The incorporated biomass and exopolysaccharides (EPS) content in the suspended and biofilm system was calculated and compared. The results showed that the cyanobacterium strain had the biofilm formation capability on both jute and cotton in the attached cultivation system. Under the same culture conditions, the biomass productivity on jute and cotton carriers was significantly higher (4.76 and 3.61 g m- 2 respectively) than the growth in aqueous suspension (1.19 g m- 2 d- 1). The greatest incorporated exopolysaccharides amount was observed on jute (43.62 ± 4.47%) and the lowest amount was obtained from the growth on positive charge yarn (18.62 ± 1.88%). This study showed that in comparison with planktonic growth, the colonization of cyanobacterial cells and subsequent production of extracellular matrix and biofilm formation can lead to increased biomass production.

Selective catalytic reduction of NO by Fe-Mn nanocatalysts: effect of structure type.

One of the most prominent features of selective catalytic reduction (SCR) of NOx is using a well-structured catalyst to advance the reaction in a desirable condition. At the present work, various crystal structures of Fe-Mn nanocatalysts, FeMn2O4 spinel, FeMnO3 perovskite and Fe2O3 (hematite)/Mn2O3 (bixbyite) nanocatalysts fabricated by co-precipitation method were evaluated for selective catalytic reduction of NO by NH3 (NH3-SCR). The studies specified that the crystal structure type had a high impact on structural properties and thereby the catalytic performance of the samples. The physicochemical characteristics of the nanocatalysts including molar ratio of metals, phase composition, crystallite size, particle size distribution, specific surface area, average pore diameter, pore volume, agglomeration degree, and amount and strength of the acidic site on the catalysts surfaces have been distinguished. From the catalytic activity evaluation, it was identified that the perovskite nanocatalyst had the best performance in NH3-SCR reaction.