HIV integration and the establishment of latency in CCL19-treated resting CD4(+) T cells require activation of NF-κB.

BACKGROUND: Eradication of HIV cannot be achieved with combination antiretroviral therapy (cART) because of the persistence of long-lived latently infected resting memory CD4(+) T cells. We previously reported that HIV latency could be established in resting CD4(+) T cells in the presence of the chemokine CCL19. To define how CCL19 facilitated the establishment of latent HIV infection, the role of chemokine receptor signalling was explored. RESULTS: In resting CD4(+) T cells, CCL19 induced phosphorylation of RAC-alpha serine/threonine-protein kinase (Akt), nuclear factor kappa B (NF-κB), extracellular-signal-regulated kinase (ERK) and p38. Inhibition of the phosphoinositol-3-kinase (PI3K) and Ras/Raf/Mitogen-activated protein kinase/ERK kinase (MEK)/ERK signalling pathways inhibited HIV integration, without significant reduction in HIV nuclear entry (measured by Alu-LTR and 2-LTR circle qPCR respectively). Inhibiting activation of MEK1/ERK1/2, c-Jun N-terminal kinase (JNK), activating protein-1 (AP-1) and NF-κB, but not p38, also inhibited HIV integration. We also show that HIV integrases interact with Pin1 in CCL19-treated CD4(+) T cells and inhibition of JNK markedly reduced this interaction, suggesting that CCL19 treatment provided sufficient signals to protect HIV integrase from degradation via the proteasome pathway. Infection of CCL19-treated resting CD4(+) T cells with mutant strains of HIV, lacking NF-κB binding sites in the HIV long terminal repeat (LTR) compared to infection with wild type virus, led to a significant reduction in integration by up to 40-fold (range 1-115.4, p = 0.03). This was in contrast to only a modest reduction of 5-fold (range 1.7-11, p > 0.05) in fully activated CD4(+) T cells infected with the same mutants. Finally, we demonstrated significant differences in integration sites following HIV infection of unactivated, CCL19-treated, and fully activated CD4(+) T cells. CONCLUSIONS: HIV integration in CCL19-treated resting CD4(+) T cells depends on NF-κB signalling and increases the stability of HIV integrase, which allow subsequent integration and establishment of latency. These findings have implications for strategies needed to prevent the establishment, and potentially reverse, latent infection.

Establishment of HIV-1 latency in resting CD4+ T cells depends on chemokine-induced changes in the actin cytoskeleton.

Eradication of HIV-1 with highly active antiretroviral therapy (HAART) is not possible due to the persistence of long-lived, latently infected resting memory CD4(+) T cells. We now show that HIV-1 latency can be established in resting CD4(+) T cells infected with HIV-1 after exposure to ligands for CCR7 (CCL19), CXCR3 (CXCL9 and CXCL10), and CCR6 (CCL20) but not in unactivated CD4(+) T cells. The mechanism did not involve cell activation or significant changes in gene expression, but was associated with rapid dephosphorylation of cofilin and changes in filamentous actin. Incubation with chemokine before infection led to efficient HIV-1 nuclear localization and integration and this was inhibited by the actin stabilizer jasplakinolide. We propose a unique pathway for establishment of latency by direct HIV-1 infection of resting CD4(+) T cells during normal chemokine-directed recirculation of CD4(+) T cells between blood and tissue.

The chemical cleavage of mismatch for the detection of mutations in long DNA fragments.

Methods to rapidly scan large regions of DNA that are not dependent on highly specific melting temperatures or suitable only for large-scale discovery are important to reduce the amount of sequencing required for DNA samples that appear to contain a mutation. This protocol describes the chemical cleavage of mismatch method to assess if a region of DNA contains a mutation and accurately localize the position of the mutation in the same reaction. To detect mutations, PCR heteroduplexes are incubated with two mismatch-specific reagents. Hydroxylamine modifies mismatched cytosine residues and potassium permanganate modifies mismatched thymine residues. The samples are then incubated with piperidine, which cleaves the DNA backbone at the site of the modified mismatched base. Cleavage products are separated by electrophoresis, revealing the identity and location of the mutation. The chemical cleavage of mismatch method can efficiently detect point mutations as well as insertions and deletions.

Mismatch oxidation assay: detection of DNA mutations using a standard UV/Vis microplate reader.

Simple, low-cost mutation detection assays that are suitable for low-throughput analysis are essential for diagnostic applications where the causative mutation may be different in every family. The mismatch oxidation assay is a simple optical absorbance assay to detect nucleotide substitutions, insertions, and deletions in heteroduplex DNA. The method relies on detecting the oxidative modification products of mismatched thymine and cytosine bases by potassium permanganate as it is reduced to manganese dioxide. This approach, unlike other methods commonly used to detect sequence variants, does not require costly labeled probes or primers, toxic chemicals, or a time-consuming electrophoretic separation step. The oxidation rate, and hence the presence of a sequence variant, is detected by measuring the formation of the potassium permanganate reduction product (hypomanganate diester), which absorbs at the 420-nm visible wavelength, using a standard UV/vis microplate reader.

Plasmodium falciparum: genetic and immunogenic characterisation of the rhoptry neck protein PfRON4.

The Apicomplexan parasites Toxoplasma and Plasmodium, respectively, cause toxoplasmosis and malaria in humans and although they invade different host cells they share largely conserved invasion mechanisms. Plasmodium falciparum merozoite invasion of red blood cells results from a series of co-ordinated events that comprise attachment of the merozoite, its re-orientation, release of the contents of the invasion-related apical organelles (the rhoptries and micronemes) followed by active propulsion of the merozoite into the cell via an actin-myosin motor. During this process, a tight junction between the parasite and red blood cell plasma membranes is formed and recent studies have identified rhoptry neck proteins, including PfRON4, that are specifically associated with the tight junction during invasion. Here, we report the structure of the gene that encodes PfRON4 and its apparent limited diversity amongst geographically diverse P. falciparum isolates. We also report that PfRON4 protein sequences elicit immunogenic responses in natural human malaria infections.

Scanning the ocular albinism 1 (OA1) gene for polymorphisms in congenital nystagmus by DHPLC.

BACKGROUND: Nystagmus is common to all types of albinism. Some subjects with nystagmus lack convincing signs of albinism, have no other visual pathway disease, and are classified as possessing congenital idiopathic nystagmus (CN). It has been postulated that CN may be a form of ocular albinism. METHODS: The presence of nystagmus, iris transillumination, and visual acuity were recorded in 39 CN and albino patients and their families. Physical characteristics were also noted. DNA from buccal swabs was obtained for use in denaturing high performance liquid chromatography (DHPLC) and chemical cleavage of mismatch (CCM) to scan several hotspots for X-linked ocular albinism (OA1) mutations. RESULTS: Two previously reported polymorphisms were confirmed: neither was found to be a causative mutation. CONCLUSION: No correlation was identified between nystagmus and OA1.

Detection of 100% of mutations in 124 individuals using a standard UV/Vis microplate reader: a novel concept for mutation scanning.

We report the development of a simple and inexpensive assay for the detection of DNA polymorphisms and mutations that is based on the modification of mismatched bases by potassium permanganate. Unlike the chemical cleavage of mismatch assay, which also exploits the reactivity of potassium permanganate to detect genomic variants, the assay we describe here does not require a cleavage manipulation and therefore does not require expensive or toxic chemicals or a separation step, as mismatches are detected using direct optical methods in a microplate format. Studies with individual deoxynucleotides demonstrated that the reactivity with potassium permanganate resulted in a specific colour change. Furthermore, studies with synthetic oligonucleotide heteroduplexes demonstrated that this colour change phenomenon could be applied to detect mismatched bases spectrophotometrically. A collection of plasmids carrying single point mutations in the mouse beta-globin promoter region was used as a model system to develop a functional mutation detection assay. Finally, the assay was validated as 100% effective in detecting mismatches in a blinded manner using DNA from patients previously screened for mutations using established techniques, such as sequencing, SSCP and denaturing high-performance liquid chromatography (DHPLC) analysis in DNA fragments up to 300 bp in length.

Chemical cleavage of mismatch (CCM) to locate base mismatches in heteroduplex DNA.

This protocol describes the use of the chemical cleavage of mismatch (CCM) method to assess whether a region of DNA contains mutations and to localize them. Compared with other mutation-detection techniques (such as single strand-conformation polymorphism (SSCP) analysis, denaturing high-performance liquid chromatography (DHPLC) and denaturing gradient gel electrophoresis (DGGE)) that detect mutations in short DNA fragments and require highly specific melting temperatures, CCM has a higher diagnostic sensitivity suited to the detection of mutations in tumor genes, and can analyze amplicons < or = 2 kb in length. To detect mutations, PCR heteroduplexes are incubated with two mismatch-specific reagents. Hydroxylamine modifies unpaired cytosine and potassium permanganate modifies unpaired thymine. The samples are then incubated with piperidine, which cleaves the DNA backbone at the site of the modified mismatched base. Cleavage products are separated by electrophoresis, revealing the identity and location of the mutation. The CCM method can efficiently detect point mutations as well as insertions and deletions. This protocol can be completed in 10 h.