RESUMO
BACKGROUND: The force-velocity relationship suggests that maximal power (Pmax) can only be produced in optimal torque (Topt) and cadence (Copt). However, the cadence at which mean maximal power (MMP) is produced has never been studied. This study aimed to determine the individual MMP-cadence relationship from in situ data. METHOD: We analyzed 1 year of data from 14 under-19 cyclists and calculated the MMP for each cadence between 50 and 120 rpm for 2-, 5-, and 20-minute durations. The MMP-cadence relationship was fit with a second-order polynomial function. The goodness of fit (r2) and odd-day-even-day absolute and relative reliability were evaluated, respectively, for Pmax, Topt, and Copt. RESULTS: The goodness of fit was very high for every duration studied. Topt and Pmax, but not Copt, were significantly higher for shorter durations. Pmax was significantly correlated only with Topt for the 3 durations (r2 = .63, .71, and .64 for 2, 5, and 20 min, respectively). DISCUSSION: Evaluation of the MMP-cadence relationship from in situ data is feasible and reliable for 2-, 5-, and 20-minute durations. This profiling approach would enable better detection of the strengths and weaknesses of cyclists and make it possible to design more effective training interventions. PRACTICAL APPLICATIONS: The analysis makes it possible to identify the torque versus cadence component that individually limits power production. Knowing the Copt for a given duration of maximal effort could help athletes choose the right gear ratio and regulate cadence during a race in order to maximize performance.
Assuntos
Ciclismo , Torque , Humanos , Ciclismo/fisiologia , Fatores de Tempo , Masculino , Adolescente , Fenômenos Biomecânicos , Desempenho Atlético/fisiologia , Reprodutibilidade dos Testes , Estudo de Prova de ConceitoRESUMO
BACKGROUND: Alpine skiing involves the conversion of potential energy into kinetic energy, with the "velocity barrier" (VB) at each moment corresponding to the maximal velocity at which the athlete can ski while staying within the boundaries of the gates and maintaining control. Nevertheless, this concept has never been proven by evidence. The aim of this study was to experimentally test the existence of the VB and clarify its relationship with skier's force production/application capacities. METHODS: Fourteen skiers were equipped with ski-mounted force plates and a positional device and ran a 2-turn Giant Slalom section starting from eight different heights on the slope. Three conditions were selected for further analysis: minimal entrance velocity (vmin ); entrance velocity allowing the better section time (VB); maximal entrance velocity (vmax ). Entrance velocity, section time, mean force output, ratio of force application effectiveness, velocity normalized energy dissipation, and path length were compared between the three conditions. Moreover, skier's mechanical energy and velocity curves were compared all along the section between the three conditions using SPM analysis. RESULTS: The section time was reduced in VB compared to vmin (p < 0.001) and vmax (p = 0.002). Skiers presented an incapacity to increase force output beyond the VB (p = 0.441) associated with a lower force application effectiveness (p = 0.005). Maximal entrance velocity was associated to higher energy dissipation (p < 0.001) and path length (p = 0.005). CONCLUSION: The present study experimentally supports the existence of the VB. The force production/application capacities seem to limit the skiing effectiveness beyond the VB, associated to increased energy dissipations and path length.
Assuntos
Esqui , Humanos , Fenômenos Biomecânicos , AtletasRESUMO
The purpose of this investigation was (1) to test the effect of movement restriction of the free leg during unilateral vertical jump on performance and power output comparing 2 different jump techniques: flexed (Classic technique) and straight (FC Luzern technique) free leg, and (2) to test the correlation between performance and power output obtained using these 2 techniques. Twenty elite soccer players performed squat (SJ) and countermovement (CMJ) jumps on each leg. The jump height and peak power output were compared between the 2 techniques for both legs. The jump height and peak power were significantly higher for the classic test for SJ and CMJ (P < .001) with no side effects or interactions. The angular range of motion of the free leg was higher for the Classic test than for the FC Lucerne test (P < .001), with no difference in the angular range of motion of the trunk. A moderate correlation was found between the 2 techniques on peak power (SJ: r = .626; CMJ: r = .649) and jump height (SJ: r = .742; CMJ: r = .891). Consequently, FC Lucerne technique, limiting the contribution of the free leg, is more appropriate to assess lower limb strength capacities during unilateral jump test.
Assuntos
Desempenho Atlético , Futebol , Humanos , Perna (Membro) , Músculo Esquelético , Movimento , Fenômenos Biomecânicos , Força MuscularRESUMO
BACKGROUND: Warm-up is commonly performed by track-and-field athletes before performing maximal sprinting activities. Whilst some warm-up strategies may enhance athletes' physical and mental readiness, less is known about the current athletes' behaviors and warm-up practices in track and field. Therefore, this study aimed to identify the warm-up practices in a population of athletes performing in sprinting disciplines. METHODS: A cross-sectional exploratory study was performed in which track-and-field athletes, performing in athletics at a competitive level in disciplines requiring maximal acceleration and sprinting were recruited. We collected, using an online survey, information about 1) "General and Anthropometric data;" 2) "Athletics training practices" questioning the level of practices and the training frequency; and 3) "Athletics warm-up practices before maximal sprinting" questioning warm-up structure, duration and specific content. RESULTS: A total of 114 athletes replied to the survey. They reported a mean weekly training duration of 10.5 (±4.0) hours and a pre-maximal sprint warm-up duration of 40.5 (±13.5) minutes. During warm-up, they were engaged in five principal activities: predominantly moderate jogging (95% participation, 8±3.3 minutes), succeeded by dynamic and/or ballistic stretching (78% participation, 9±4.3 minutes), followed by athletic drills (96% participation, 15±5.4 minutes), culminating in accelerations (100% participation) along with high-speed running (77% participation). Warm-up duration and composition differed across athletes' levels of practice and disciplines. CONCLUSIONS: Most of the participants' warm-up practices were typically structured in a three-phase manner, comprising jogging, stretching, and specific training (athletic drills and accelerations). Most athletes followed scientific-based warm-up recommendations there are some areas where the evidence is limited, and more research is needed to determine the optimal warm-up routine for athletes.
Assuntos
Desempenho Atlético , Corrida , Atletismo , Humanos , Estudos Transversais , AtletasRESUMO
PURPOSE: To compare linear and curvilinear models describing the force-velocity relationship obtained in lower-limb acyclic extensions, considering experimental data on an unprecedented range of velocity conditions. METHODS: Nine athletes performed lower-limb extensions on a leg-press ergometer, designed to provide a very broad range of force and velocity conditions. Previously inaccessible low inertial and resistive conditions were achieved by performing extensions horizontally and with assistance. Force and velocity were continuously measured over the push-off in six resistive conditions to assess individual force-velocity relationships. Goodness of fit of linear and curvilinear models (second-order polynomial function, Fenn and Marsh's, and Hill's equations) on force and velocity data were compared via the Akaike Information Criterion. RESULTS: Expressed relative to the theoretical maximal force and velocity obtained from the linear model, force and velocity data ranged from 26.6 ± 6.6 to 96.0 ± 3.6% (16-99%) and from 8.3 ± 1.9 to 76.6 ± 7.0% (5-86%), respectively. Curvilinear and linear models showed very high fit (adjusted r2 = 0.951-0.999; SEE = 17-159N). Despite curvilinear models better fitting the data, there was a ~ 99-100% chance the linear model best described the data. CONCLUSION: A combination between goodness of fit, degrees of freedom and common sense (e.g., rational physiologically values) indicated linear modelling is preferable for describing the force-velocity relationship during acyclic lower-limb extensions, compared to curvilinear models. Notably, linearity appears maintained in conditions approaching theoretical maximal velocity. Using horizontal and assisted lower-limb extension to more broadly explore resistive/assistive conditions could improve reliability and accuracy of the force-velocity relationship and associated parameters.
RESUMO
PURPOSE: This study aimed to determine relationships between parameters of force-production capacity in sprinting and opposition skill efficiency in rugby union games according to position. METHODS: The sprint force-velocity profile of 33 professional rugby union players divided into 2 subgroups (forwards and backs) was measured on a 30-m sprint. Skill efficiencies (in percentage) of offensive duels, tackles, and rucks were assessed using objective criteria during 12 consecutive competitive games. Pearson correlation was used to determine the relationships between parameters of horizontal force-production capacity in sprinting (maximum propulsive power, theoretical maximum force [F0], theoretical maximum velocity, maximum ratio of horizontal force [RFmax], and rate of decrease of this ratio of forces with increasing velocity) and skill efficiencies. Two multiple linear regression models were used to observe whether skill efficiencies could depend on determinants of horizontal force application in low- or high-velocity conditions. A first model including F0 and theoretical maximum velocity was used as a macroscopic analysis, while a second model including RFmax and rate of decrease of this ratio of forces with increasing velocity was used as microscopic analysis to determine the most significant determinants of skill efficiency. RESULTS: All skill efficiencies were strongly correlated with maximum propulsive power in forwards and backs. In forwards, F0 and RFmax were the key predictors of dueling, rucking, and tackling efficiency. In backs, F0 was the main predictor of dueling and rucking efficiency, whereas RFmax was the key predictor of dueling and tackling efficiency. F0 and theoretical maximum velocity equivalently contributed to tackling performance. CONCLUSIONS: In rugby union forward and back players, skill efficiency is correlated with maximum propulsive power and may be more explained by horizontal force-production capacity and mechanical effectiveness at lower velocities than at higher velocities.
Assuntos
Desempenho Atlético , Futebol Americano , Corrida , Humanos , RugbyRESUMO
Our study aimed to compare explosive performance and underlying mechanical determinants explored through F-V profiles in jumping and sprinting among young soccer players based on their playing position. Ninety elite soccer players were categorized into the following positions: goalkeepers, central defenders, wide defenders, central midfielders, wide midfielders, and forwards. Two testing sessions were conducted to measure the 30-metre sprint time (T30) using an over-ground sprint test and jump height (Hmax) through the SJ test. Results demonstrated performance variations among positions. In sprinting, forwards showed greater T30 (4.5 ± 0.14 s) compared to other positions, with goalkeepers exhibiting the lowest T30 (4.86 ± 0.18 s). Forwards also displayed higher maximal theoretical velocity (8.8 ± 0.4 m.s-1) and power output (Pmax) (19.4 ± 2.6 W.kg-1) than other positions, while goalkeepers had the lowest Pmax (16.5 ± 2 W.kg-1). In jumping, forwards (33.2 ± 3.9 cm) and wide-midfielders (33.6 ± 3.8 cm) achieved higher Hmax compared to goalkeepers (29.2 ± 5 cm) and central-midfielders (29.2 ± 3.8 cm). Wide-midfielders (28.5 ± 4.8 W.kg-1) and forwards (27.1 ± 4.3 W.kg-1) surpassed goalkeepers (23 ± 2.8 W.kg-1) and central-midfielders (25.1 ± 3.8 W.kg-1) in Pmax. Our findings reveal substantial position-related disparities in F-V profiles among elite young soccer players, in sprinting and jumping emphasizing the need for position-specific training programmes to optimize player development and on-field performance from an early age.
Assuntos
Desempenho Atlético , Corrida , Futebol , HumanosRESUMO
To directly compare five commonly used on-field systems (motorized linear encoder, laser, radar, global positioning system, and timing gates) during sprint acceleration to (i) measure velocity−time data, (ii) compute the main associated force−velocity variables, and (iii) assess their respective inter-trial reliability. Eighteen participants performed three 40 m sprints, during which five systems were used to simultaneously and separately record the body center of the mass horizontal position or velocity over time. Horizontal force−velocity mechanical outputs for the two best trials were computed following an inverse dynamic model and based on an exponential fitting of the position- or velocity-time data. Between the five systems, the maximal running velocity was close (7.99 to 8.04 m.s−1), while the time constant showed larger differences (1.18 to 1.29 s). Concurrent validity results overall showed a relative systematic error of 0.86 to 2.28% for maximum and theoretically maximal velocity variables and 4.78 to 12.9% for early acceleration variables. The inter-trial reliability showed low coefficients of variation (all <5.74%), and was very close between all of the systems. All of the systems tested here can be considered relevant to measure the maximal velocity and compute the force−velocity mechanical outputs. Practitioners are advised to interpret the data obtained with either of these systems in light of these results.
Assuntos
Desempenho Atlético , Corrida , Humanos , Aceleração , Fenômenos Biomecânicos , Reprodutibilidade dos TestesRESUMO
When poor reliability of "output" variables is reported, it can be difficult to discern whether blame lies with the measurement (ie, the inputs) or the overarching concept. This commentary addresses this issue, using the force-velocity-power (FvP) profile in jumping to illustrate the interplay between concept, method, and measurement reliability. While FvP testing has risen in popularity and accessibility, some studies have challenged the reliability and subsequent utility of the concept itself without clearly considering the potential for imprecise procedures to impact reliability measures. To this end, simulations based on virtual athletes confirmed that push-off distance and jump-height variability should be <4% to 5% to guarantee well-fitted force-velocity relationships and acceptable typical error (<10%) in FvP outputs, which was in line with previous experimental findings. Thus, while arguably acceptable in isolation, the 5% to 10% variability in push-off distance or jump height reported in the critiquing studies suggests that their methods were not reliable enough (lack of familiarization, inaccurate procedures, or submaximal efforts) to infer underpinning force-production capacities. Instead of challenging only the concept of FvP relationship testing, an alternative conclusion should have considered the context in which the results were observed: If procedures' and/or tasks' execution is too variable, FvP outputs will be unreliable. As for some other neuromuscular or physiological testing, the FvP relationship, which magnifies measurement errors, is unreliable when the input measurements or testing procedures are inaccurate independently from the method or concept used. Field "simple" methods require the same methodological rigor as "lab" methods to obtain reliable output data.
Assuntos
Atletas , Teste de Esforço , Humanos , Teste de Esforço/métodos , Reprodutibilidade dos Testes , Força Muscular/fisiologiaRESUMO
PURPOSE: The aims of this study were to (1) assess the concurrent validity of global positioning systems (GPSs) against a radar device to measure sprinting force-velocity (F-v) profiles and (2) evaluate the interunit reliability of 10-Hz GPS devices (Vector S7, Catapult Innovations). METHODS: Sixteen male elite U18 rugby union players (178.3 [7.6] cm; 78.3 [13.2] kg) participated. Two 50-m sprints interspersed with at least 5 minutes of recovery were completed to obtain input (maximal sprint speed and acceleration time constant τ) and output (theoretical maximal horizontal force, sprinting speed, and horizontal power) F-v profile variables. Sprint running speed was concurrently measured with a radar and 2 GPS units placed on the upper back of each player. Concurrent validity and interunit reliability analyses were performed. RESULTS: Moderate to nearly perfect correlations were observed between radar and GPS-derived F-v variables, with small to large typical errors. Trivial to small coefficients of variation were found regarding the GPS interunit reliability. CONCLUSION: The GPS devices tested in this study represent a valid and reliable alternative to a radar device when assessing sprint acceleration F-v profiles in team-sport players.
Assuntos
Desempenho Atlético , Corrida , Aceleração , Atletas , Sistemas de Informação Geográfica , Humanos , Masculino , Reprodutibilidade dos TestesRESUMO
ABSTRACT: Le Scouarnec, J, Samozino, P, Andrieu, B, Thubin, T, Morin, JB, and Favier, FB. Effects of repeated sprint training with progressive elastic resistance on sprint performance and anterior-posterior force production in elite young soccer players. J Strength Cond Res 36(6): 1675-1681, 2022-This study aimed to determine whether repeated sprint training with progressive high elastic resistance could improve sprint performance and anterior-posterior (AP) force production capacities of elite young soccer players. Seven elite U19 soccer players underwent 10 sessions of elastic-resisted repeated sprints on 8 weeks, whereas 8 U17 players from the same academy (control group) followed the same protocol without elastic bands. Sprint performance and mechanical parameters were recorded on a 30-m sprint before and after training. The control group did not show change for any of the measured variables. In contrast, the elastic-resisted training resulted in a significant improvement of the sprint time (-2.1 ± 1.3%; p = 0.026; Hedges' g = -0.49) and maximal velocity (Vmax; +3.9 ± 2%; p = 0.029; Hedges' g = 0.61) reached during the 30-m sprint. These enhancements were concurrent with an increase in the maximal power output related to AP force (Pmax; +4.9 ± 5.1%%; p = 0.026; Hedges' g = 0.42). Although the theoretical maximal AP force (F0) remained unchanged in both groups, there was a medium but nonsignificant increase in theoretical maximal velocity (V0; +3.7 ± 2.5%; p = 0.13; Hedges' g = 0.5) only in the elastic group. Therefore, the present results show that sprint capacity of elite young soccer players can be further improved by adding incremental resistance against runner displacement to raise the ability to produce AP force, rather at high velocity in the final phase of the acceleration.
Assuntos
Desempenho Atlético , Corrida , Futebol , Aceleração , Humanos , Modalidades de FisioterapiaRESUMO
Movement velocity has been viewed as one of the bilateral deficit (BLD) determinants. This research tested the velocity effect on BLD during a half-squat exercise. The role of muscle excitation in BLD was also assessed. BLD amplitude was assessed in 12 male soccer players while performing a half-squat exercise with incremental load. During the exercise's pushing phase, the average force and velocity were measured in bilateral and unilateral conditions to provide the bilateral index (BI) at each interpolated velocity. The vastus lateralis and medialis excitation was assessed during the exercise by calculating the surface electromyography signal root mean square (sEMGRMS). The BI for sEMGRMS (sEMG BI) was calculated. The theoretical maximum force (F0) and velocity (v0) were also determined. F0 was +43 (28)% in bilateral compared with unilateral conditions (p < 0.001), whereas v0 was similar in both conditions (p = 0.386). The BI magnitude rose with the increase in velocity from -34 (7)% at 50%v0 to -70 (17)% at 90%v0 (p 0.03-<0.001), whereas no sEMG BI occurred (p: 0.07-0.991 in both muscles). The study reported velocity-dependent changes in the BLD amplitude, with the largest BLD amplitudes occurring at the highest velocities. This behaviour could provide useful information for setting specific contraction velocities to exploit/limit the BLD amplitude as a possible training stimulus.
Assuntos
Exercício Físico , Músculo Esquelético , Eletromiografia , Exercício Físico/fisiologia , Humanos , Masculino , Movimento/fisiologia , Músculo Esquelético/fisiologia , Músculo QuadrícepsRESUMO
An a-posteriori multicentre reliability study was conducted to compare the between-session reliability of the force-velocity relationship parameters (force-intercept [F0], velocity-intercept [v0], and maximum power [Pmax]) between different regression models during the bench press (BP) and bench press throw (BPT) exercises. Data from four and three studies were considered for the BP (n = 102) and BPT (n = 81) exercises, respectively. The force-velocity relationships were determined using five regression models: linear multiple-point, linear two-point, quadratic polynomial, hyperbolic, and exponential. All regression models provided F0 and Pmax with acceptable reliability (cut-off CV ≤ 9.45%; cut-off ICC ≥ 0.79) with the exceptions of F0 for the quadratic polynomial and hyperbolic models (BPT) and Pmax for the exponential model (BP and BPT). Only the linear multiple- and linear two-point models provided v0 with acceptable absolute reliability (cut-off CV ≤ 7.72%). Regardless of the exercise, the reliability of the three parameters was generally higher for the linear multiple- and two-point models compared to the other models (CVratio ≥ 1.22), and no significant differences were observed between multiple- and linear two-point models (CVratio ≤ 1.11). Linear regression models are recommended to maximise the reliability of the force-velocity relationship parameters during the BP and BPT exercises.
RESUMO
Over the years, the foot tapping test protocol has been proposed by scientists to identify the capabilities of the lower limb neuromuscular system in the medical context; however, to our knowledge, no studies have established its usefulness and relationship to athletic performance. The aim of the present study was to test the reliability, criterion validity and sensitivity of a new foot tapping (TAP) test, and to examine its relationship with proxies of athletic performance in soccer players. Forty voluntary soccer players of two different levels participated in this study (20 players from the national level: age: 22.6 ± 2.5 years and 20 players from regional level: 25.1 ± 3.6 years). They performed the TAP test on two separate occasions to test its relative and absolute reliability. To examine the criterion validity of the TAP test, all participants performed four types of jumps, sprint tests, agility tests, the Wingate test and the finger tapping test considered a gold standard tapping test. The sensitivity was assessed with national and regional player levels. The TAP test presented a high relative and absolute reliability with intra-class correlation coefficient ICC > 0.90, standard errors of measurement SEM < 5% and mean difference ±95% limits of agreement equal to 0.2 ± 0.8 tap·s−1. National level players showed a higher TAP score (p < 0.001; dz = 1.96, large) compared to regional players (9.68 ± 1.41 tap·s−1 vs. 7.28 ± 1.01 tap·s−1, respectively) and the value of area under curve measured by the receiver operating characteristic curve technique was 0.95 (95% CI: 0.827−0.990). The TAP test showed a significant association with the finger tapping test (r = 0.84, p < 0.001), whereas no correlation was seen between the TAP test and all the other physical tests measured. The TAP test could be considered a valid and reliable test to assess lower limb neuromuscular ability in soccer players.
Assuntos
Corrida , Futebol , Adulto , Teste de Esforço/métodos , Humanos , Extremidade Inferior , Reprodutibilidade dos Testes , Adulto JovemRESUMO
This study investigated time-courses of physiological and psychological parameters of rowers during the first 1,500 m of a simulated race on a rowing ergometer using different pacing strategies. This provided a picture of the physiological and psychological state of the rowers at the start of the last 500 m of their race. Investigated strategies corresponded either to a degressive (degr), a progressive (prog), or a stable (stab) power output over the traveled distance. Thirteen French rowers (4 oarswomen and 9 oarsmen) of national and ex-international levels volunteered to participate. Handle force and velocity, oxygen uptake, heart rate, blood lactate concentration, and peripheral oxygen saturation were measured during the trials. Power output, generated energy [by O 2 consumption (E oxi ) and blood lactate accumulation (E non-oxi )] and efficiency were computed. Rowers also rated their perceived exertion (RPE) and protocol preference. In the explored strategies, no significant differences were found for E oxi . Final blood lactate concentration ([La] blood ) and RPE were similar for all strategies. However, the increase in [La] blood and RPE occurred sooner for degr than for stab and prog. Therefore, the time spent at higher [La] blood and RPE was longer for degr than for stab and prog. According to the questionnaire, degr was the least preferred protocol. While during 2000 m races, the first 1500 m are usually and empirically often conducted in a degr way, the present results indicate that this strategy was the least preferred by the rowers and led to a higher time spent at high [La] blood and RPE.
RESUMO
The aim was to determine the respective influences of sprinting maximal power output ( P H max ) and mechanical Force-velocity (F-v) profile (ie, ratio between horizontal force production capacities at low and high velocities) on sprint acceleration performance. A macroscopic biomechanical model using an inverse dynamics approach applied to the athlete's center of mass during running acceleration was developed to express the time to cover a given distance as a mathematical function of P H max and F-v profile. Simulations showed that sprint acceleration performance depends mainly on P H max , but also on the F-v profile, with the existence of an individual optimal F-v profile corresponding, for a given P H max , to the best balance between force production capacities at low and high velocities. This individual optimal profile depends on P H max and sprint distance: the lower the sprint distance, the more the optimal F-v profile is oriented to force capabilities and vice versa. When applying this model to the data of 231 athletes from very different sports, differences between optimal and actual F-v profile were observed and depend more on the variability in the optimal F-v profile between sprint distances than on the interindividual variability in F-v profiles. For a given sprint distance, acceleration performance (<30 m) mainly depends on P H max and slightly on the difference between optimal and actual F-v profile, the weight of each variable changing with sprint distance. Sprint acceleration performance is determined by both maximization of the horizontal power output capabilities and the optimization of the mechanical F-v profile of sprint propulsion.
Assuntos
Desempenho Atlético , Corrida , Aceleração , Atletas , Fenômenos Biomecânicos , HumanosRESUMO
The goal of this study was to analyse the effects of ground technicity on cardio-respiratory and biomechanical responses during uphill running. Ten experienced male trail-runners ran â¼10.5 min at racing pace on two trails with different (high and low) a priori technicity levels. These two runs were replicated (same slope, velocity, and distance) indoor on a motor-driven treadmill. Oxygen uptake, minute ventilation (VÌE), heart rate as well as step frequency and medio-lateral feet accelerations (i.e. objective indices of uneven terrain running patterns adjustments) were continuously measured throughout all sessions. Rating of perceived exertion (RPE) and perceived technicity were assessed at the end of each bout. Oxygen cost of running (O2Cr) (+10.5%; p < 0.001), VÌE (+21%; p < 0.004) and the range and variability of feet medio-lateral accelerations (+116% and +134%, respectively; p < 0.001), were significantly greater when running on trail compared to the treadmill, regardless of the a priori technicity level. Despite perceived technicity being lower on treadmill (p < 0.001), RPE was not different between trail and treadmill runs (p < 0.68). It is concluded that running uphill on a trail vs. a treadmill significantly elevates both O2Cr and magnitude/variability of feet medio-lateral accelerations but no difference could be identified between trails of different a priori technicities. These results strengthen the need for trainers and race organisers to consider terrain technicity per se as a challenging cardio-respiratory and biomechanical component in uphill trail running.Highlights Ten experienced male trail-runners ran â¼10.5 min at racing pace on two trails with different a priori technicity levels. The two runs were replicated (same slope, velocity, and distance) indoor on a motor-driven treadmill.Oxygen cost of running (O2Cr), minute ventilation (VÌE) as well as medio-lateral feet accelerations (i.e. objective indices of uneven terrain running patterns adjustments) were continuously measured throughout all sessions. Rating of perceived exertion (RPE) and perceived technicity were assessed at the end of each bout.O2Cr (+10.5%; p < 0.001), VÌE (+21%; p < 0.004) and the magnitude and variability of feet medio-lateral accelerations (+116% and +134%, respectively; p < 0.001) were significantly greater when running on trail compared to treadmill, regardless of the a priori technicity level. Despite O2Cr being different between trail and treadmill runs, RPE was not.Thus, running uphill on a trail vs. on a treadmill significantly elevates both O2Cr and magnitude/variability of feet medio-lateral accelerations but no difference could be identified between trails of different a priori technicities.
Assuntos
Consumo de Oxigênio , Corrida , Masculino , Humanos , Consumo de Oxigênio/fisiologia , Corrida/fisiologia , Teste de Esforço/métodos , Frequência Cardíaca/fisiologia , OxigênioRESUMO
This study aimed to compare the magnitude of the force-velocity (F-V) relationship parameters (maximum force [F0], maximum velocity [V0], F-V slope, and maximum power [Pmax]) between the squat jumps (SJ) performed from different knee angles. The F-V relationships of 12 men were assessed in 3 sessions during the SJ performed from a knee angle of 80° (SJ80), 90° (SJ90) and 100° (SJ100). The SJ100 provided likely to very likely higher values of F0 and Pmax compared to SJ80 (86% and 98%, respectively) and SJ90 (73% and 94%, respectively), while unclear and trivial differences were observed for the remaining comparisons. The magnitude of the correlations between the 3 SJ types was very large to nearly perfect for Pmax (r range = 0.864 to 0.940), moderate to very large for F0 (r range = 0.438 to 0.778), and small to large for V0 (r range = 0.361 to 0.642) and the F-V slope (r range = 0.178 to 0.645). These results suggest that the F-V relationship assessed during the SJ exercise is affected by the initial knee angle with the increase of the knee angle from 80° to 100° being associated with higher values of F0 and Pmax, while V0 remains unchanged.