RESUMO
The chemical and biological conversion of biomass-derived lignin is a promising pathway for producing valuable low molecular weight aromatic chemicals, such as vanillin or guaiacol, known as lignin monomers (LMs). Various methods employing chromatography and electrospray ionization-mass spectrometry (ESI-MS) have been developed for LM analysis, but the impact of LM chemical properties on analytical performance remains unclear. This study systematically optimized ESI efficiency for 24 selected LMs, categorized by functionality. Fractional factorial designs were employed for each LM to assess ESI parameter effects on ionization efficiency using ultra-high-performance supercritical fluid chromatography/ESI-MS (UHPSFC/ESI-MS). Molecular descriptors were also investigated to explain variations in ESI parameter responses and chromatographic retention among the LMs. Structural differences among LMs led to complex optimal ESI settings. Notably, LMs with two methoxy groups benefited from higher gas and sheath gas temperatures, likely due to their lower log P and higher desolvation energy requirements. Similarly, vinyl acids and ketones showed advantages at elevated gas temperatures. The retention in UHPSFC using a diol stationary phase was correlated with the number of hydrogen bond donors. In summary, this study elucidates structural features influencing chromatographic retention and ESI efficiency in LMs. The findings can aid in developing analytical methods for specific technical lignins. However, the absence of an adequate number of LM standards limits the prediction of LM structures solely based on ESI performance data.
RESUMO
The growing interest in lignin valorization in the past decades calls for analytical techniques for lignin characterization, ranging from wet chemistry techniques to highly sophisticated chromatographic and spectroscopic methods. One of the key parameters to consider is the molecular weight profile of lignin, which is routinely determined by size-exclusion chromatography; however, this is by no means straightforward and is prone to being hampered by considerable errors. Our study expands the fundamental understanding of the bias-inducing mechanisms in gel permeation chromatography (GPC), the magnitude of error originating from using polystyrene standards for mass calibration, and an evaluation of the effects of the solvent and type of lignin on the observed bias. The developed partial least-squares (PLS) regression model for lignin-related monomers revealed that lignin is prone to association mainly via hydrogen bonding. This hypothesis was supported by functional group-based analysis of the bias as well as pulse field gradient (pfg) diffusion NMR spectroscopy of model compounds in THF-d8. Furthermore, although the lack of standards hindered drawing conclusions based on functionalities, direct infusion electrospray ionization mass spectrometry indicated that the relative bias decreases considerably for higher molecular weight species. The results from pfg-diffusion NMR spectroscopy on whole lignin samples were comparable when the same solvents were used in both experiments; in addition, the comparison between results obtained by pfg-diffusion NMR in different solvents gives some additional insights into the aggregation.
RESUMO
Extraction of vitamin D, including its hydroxylated and esterified metabolites, from soft tissues such as the liver is challenging due to the lipophilic character of matrix and analytes that are expected in very low concentration levels. In this study, we aimed at the optimization of two-step extraction using solid-liquid extraction as the first step, followed by solid-phase extraction. Various solvents, including ethanol, acetonitrile, methanol, acetone, heptane, and heptane with isopropanol, were investigated to isolate vitamin D compounds from liver tissue in the first step. Acetone was finally selected as the most suitable solvent for the solid-liquid extraction, with the highest recovery in the range of 67 - 98% for polar hydroxylated forms and 3 - 28% for lipophilic vitamin D and esters. Two solid phase extraction (SPE) based on the (i) "bind and elute strategy" and (ii) "removal strategy" using hydrophilic-lipophilic balanced SPE sorbent were optimized as a proceeding step for acetone extracts to increase the method selectivity. Finally, two optimized methods, combining solid-liquid extraction and individual SPE strategy, were examined in terms of sensitivity, recovery, matrix effect, accuracy, and precision. The limits of quantification were in the range of 1 - 10 ng/mL and 3 - 20 ng/mL analyzed by ultra-high performance supercritical fluid chromatography and ultra-high performance liquid chromatography hyphenated a with tandem mass spectrometer, respectively. The absolute recovery determined for the "bind and elute strategy" protocol was in the range of 3 - 24 %. Nevertheless, this method was free of matrix effects, which were determined to be in the 73 - 120 % range. On the contrary, the "removal strategy" approach provided higher recovery values for all compounds (47 - 123 %), but the results for nonpolar vitamin D and esters were strongly affected by signal suppression (matrix effects 3 - 51 %). Both methods fulfilled the criteria for accuracy and precision requested by the European Medicine Agency Guideline on Bioanalysis. "Removal strategy" SPE with decreased manual intervention and lower solvent consumption was finally applied to mouse liver tissue to determine vitamin D and its hydroxylated and esterified metabolites for the first time. The results, i.e., vitamin D esters detected in liver tissue, supported the notion that esters of vitamin D can be stored in lipophilic tissues to release vitamin D.
Assuntos
Espectrometria de Massas em Tandem , Vitamina D , Animais , Camundongos , Espectrometria de Massas em Tandem/métodos , Acetona , Cromatografia Líquida de Alta Pressão/métodos , Solventes , Vitaminas , Fígado , Heptanos , Extração em Fase Sólida/métodosRESUMO
Fat-soluble vitamin D is an essential bioactive compound important for human health. Insufficient vitamin D levels can result not only in bone disease but also in other disorders, such as cancer, metabolic disorders, and diseases related to poor immune function. The current methods commonly used for vitamin D analysis are often applied to determine the levels of the most abundant metabolite in plasma, i.e., 25-OH-D2/D3. These methods do not consider the presence of other hydroxylated and esterified metabolites, including isomers and epimers, which are typically found in low concentrations. In this study, we developed a fast and selective ultra-high performance supercritical fluid chromatography (UHPSFC) method using a 150 mm long 1-amino anthracene (1-AA) column and a mobile phase consisting of carbon dioxide and methanol/isopropanol (1/1, v/v) mixed with 8 % water. After thorough optimization of column temperature and back pressure, the separation of four vitamin D3 esters, vitamin D3 and D2, and eight mono- and di-hydroxylated metabolites, including three groups of isomers, was achieved in 10 min. Two ion sources, atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization optimized within this study, were compared in tandem mass spectrometry (MS/MS) detection. No significant sensitivity differences were observed. Subsequently, the same 1-AA column chemistry was examined in ultra-high performance liquid chromatography (UHPLC) as the stationary phase that could hypothetically bring different selectivity in the separation of vitamin D and its metabolites. However, this hypothesis was rejected, and C18 was used as a stationary phase in the final optimized UHPLC-MS/MS method. Despite detailed optimization, the final 15 min UHPLC method was not able to separate di-hydroxylated isomers of vitamin D3, while it enabled better resolution of esterified forms compared to UHPSFC. Optimized methods provided similar repeatability of retention times and peak areas, with RSD < 2 % and 10 %, respectively. The lowest limits of quantification were in the range of 1.2 - 4.9 ng/mL for UHPSFC-APCI-MS/MS, while for UHPLC-APCI-MS/MS, they were typically in the range of 2.6 - 9.6 ng/mL. Based on the obtained results, the UHPSFC-APCI-MS/MS method was the most promising approach for fast, selective, and sensitive analysis that could be applied in the analysis of biological samples with emphasis on the separation of both hydroxylated and esterified metabolites, including isomeric forms.
Assuntos
Cromatografia com Fluido Supercrítico , Vitamina D , Humanos , Espectrometria de Massas em Tandem/métodos , Cromatografia Líquida de Alta Pressão/métodos , Cromatografia com Fluido Supercrítico/métodos , Vitaminas , ColecalciferolRESUMO
It is well-known that an ideal extraction method enabling quantitative analysis should give complete extraction of the target analytes as well as minimal co-extraction of unwanted matrix substances. If the extraction method is part of a nontarget screening protocol, the desired analytes can differ widely in terms of chemical properties. In chromatography, terminologies such as recovery, selectivity, and comprehensiveness are well-established and can easily be determined. However, in extraction, these concepts are much less developed. Hence, the aim of our research is to develop and scrutinize theory in extraction with respect to numerical descriptors for extractability, selectivity, and comprehensiveness. Our approach is based on experiments determining the extractability of target analytes and selected interferences. As a case study, we use a pooled sample of three species of seaweed (Alaria esculenta, Laminaria digitata and Ascophyllum nodosum). Target analytes are ß-carotene, fucoxanthin, δ-tocopherol, and phloroglucinol; and selected interferences are carbohydrates, proteins, ash, arsenic, and chlorophyll a. As a "green and clean" extraction technique, supercritical fluid extraction (SFE) using mixtures of CO2, ethanol and water were explored using a design of experiment. The temperature was varied between 40-80°C, and the pressure was held constant at 300 bar. Obtained results clearly demonstrate that highest relative selectivity was achieved with CO2 containing only 5 vol% of ethanol and no water, which primarily enabled high extractability of ß-carotene, and yielding an extract free of carbohydrates, proteins, and toxic metals such as arsenic. Best methods for highest extractability of the other target analytes varied quite widely. Analytes requiring the highest water content (fucoxanthin and phloroglucinol), also resulted in the lowest relative selectivity. Maximum relative comprehensiveness was achieved using CO2/ethanol/water (40/55/5, v/v/v) at 70°C and 300 bar. Our study demonstrates the feasibility of using relative quantitative descriptors for extractability, selectivity, and comprehensiveness, in optimization strategies for analytical extractions.
Assuntos
Arsênio , Cromatografia com Fluido Supercrítico , Alga Marinha , Etanol/química , Cromatografia com Fluido Supercrítico/métodos , Dióxido de Carbono/química , beta Caroteno/análise , Clorofila A , CarboidratosRESUMO
Lignin constitutes an impressive resource of high-value low molecular weight compounds. However, robust methods for isolation of the extractable fraction from lignocellulose are yet to be established. In this study, supercritical fluid extraction (SFE) and CO2-expanded liquid extraction (CXLE) were employed to extract lignin from softwood and hardwood chips. Ethanol, acetone, and ethyl lactate were investigated as green organic co-solvents in the extractions. Additionally, the effects of temperature, CO2 percentage and the water content of the co-solvent were investigated using a design of experiment approach employing full factorial designs. Ethyl lactate and acetone provided the highest gravimetric yields. The water content in the extraction mixture had the main impact on the amount of extractable lignin monomers (LMs) and lignin oligomers (LOs) while the type of organic solvent was of minor importance. The most effective extraction was achieved by using a combination of liquid CO2/acetone/water (10/72/18, v/v/v) at 60 °C, 350 bar, 30 min and 2 mL min-1 flow rate. The optimized method provided detection of 13 LMs and 6 lignin dimers (LDs) from the hardwood chips. The results demonstrate the potential of supercritical fluids and green solvents in the field of mild and bening lignin extraction from wood.
RESUMO
The increased interest in utilizing lignin as a feedstock to produce various aromatic compounds requires advanced chemical analysis methods to provide qualitative and quantitative characterization of lignin samples along different technology streamlines. However, due to the lack of commercially available chemical standards, routine quantification of industrially relevant lignin oligomers in complex lignin samples remains a challenge. This study presents a novel method for universal quantification of lignin dimers based on supercritical fluid chromatography with charged aerosol detection (CAD). A series of lignin-derived dimeric compounds that have been reported from reductive catalytic fractionation (RCF) were synthesized and used as standards. The applicability of using linear regression instead of quadratic calibration curves was evaluated over a concentration range of 15-125 mg/L, demonstrating that the former calibration method is as appropriate as the latter. The response factors of lignin dimeric compounds were compared to assess the uniformity of the CAD signal, revealing that the CAD response for the tested lignin dimers did not differ substantially. It was also found that the response factors were not dependent on the number of methoxy groups or linkage motifs, ultimately enabling the use of only one calibrant for these compounds. The importance of chromatographic peak resolution in CAD was stressed, and the use of a digital peak sharpening technique was adopted and applied to address this challenge. The developed method was verified and used for the quantification of lignin dimers in an oil obtained by a RCF of birch sawdust.
Assuntos
Cromatografia com Fluido Supercrítico , Lignina , Lignina/análise , Polímeros/análise , Cromatografia Líquida de Alta Pressão , Aerossóis/análiseRESUMO
In this study, an analytical method has been developed that, for the first time, allows simultaneous determination of vitamin D2 and vitamin D3 along with their hydroxylated and esterified forms. A group of 12 vitamin D analogues including vitamin D2 and vitamin D3, seven hydroxylated metabolites, and three ester forms were separated in a single 8.0 min run using ultrahigh-performance supercritical fluid chromatography coupled with triple quadrupole tandem mass spectrometry. Electrospray ionization and atmospheric pressure chemical ionization were investigated as ion sources, of which the latter showed a higher ionization efficiency. Chromatographic conditions were thoroughly evaluated by a step-by-step method, whereas an experimental design was applied for the optimization of the ionization parameters. Calibration and repeatability studies were carried out to validate the instrumental methodology showing determination coefficients higher than 0.9992 and good intra- and interday precision with relative standard deviations for areas and retention times lower than 10 and 2.1%, respectively, for all target analytes. Limits of quantification were below 3.03 µg/L for all compounds. The methodology was then validated and applied for the evaluation of human plasma samples in order to demonstrate its applicability to the analysis of vitamin D analogues in biological samples. Samples of five individuals were analyzed. Results show that linoleate-D3, vitamin D2, vitamin D3, 25-hydroxyvitamin D2, 24,25-dihydroxyvitamin D3, and 1,25-dihydroxyvitamin D3 could be detected in most samples, while the two latter also were quantified in all analyzed samples.
Assuntos
Cromatografia com Fluido Supercrítico , Espectrometria de Massas em Tandem , Calcifediol , Humanos , Espectrometria de Massas em Tandem/métodos , Vitamina D , VitaminasRESUMO
Lignin is a promising renewable resource and its valorization could help to reduce our dependency on fossil carbon resources. Especially the production of small molecular weight and economically valuable compounds, such as vanillin, are of interest. A good separation of the sample components is crucial for a confident identification of compounds in complex sample mixtures using for instance mass spectrometry. In this work, the resolving power and selectivity of five different stationary phases for ultrahigh-performance supercritical fluid chromatography were studied for the class separation of lignin monomers (LMs) and dimers (LDs). A separation of LMs and LDs will help to identify such compounds in complex technical lignin samples. It could be shown that stationary phases with both hydrogen-bonding acceptor and donator groups offer high overall resolving power, while π-π-interactions are advantageous for the separation of the two compound classes. An almost complete separation combined with an improved overall resolving power was achieved with the 1-aminoanthracene stationary phase, which offers both hydrogen-bonding interactions and π-π-interactions.
Assuntos
Técnicas de Química Analítica , Cromatografia com Fluido Supercrítico , Lignina , Fenóis , Técnicas de Química Analítica/métodos , Lignina/análogos & derivados , Lignina/química , Espectrometria de Massas , Fenóis/isolamento & purificaçãoRESUMO
Base-catalyzed depolymerization of black liquor retentate (BLR) from the kraft pulping process, followed by ultrafiltration, has been suggested as a means of obtaining low-molecular-weight (LMW) compounds. The chemical complexity of BLR, which consists of a mixture of softwood and hardwood lignin that has undergone several kinds of treatment, leads to a complex mixture of LMW compounds, making the separation of components for the formation of value-added chemicals more difficult. Identifying the phenolic compounds in the LMW fractions obtained under different depolymerization conditions is essential for the upgrading process. In this study, a state-of-the-art nontargeted analysis method using ultra-high-performance supercritical fluid chromatography coupled to high-resolution multiple-stage tandem mass spectrometry (UHPSFC/HRMSn) combined with a Kendrick mass defect-based classification model was applied to analyze the monomers and oligomers in the LMW fractions separated from BLR samples depolymerized at 170-210 °C. The most common phenolic compound types were dimers, followed by monomers. A second round of depolymerization yielded low amounts of monomers and dimers, while a high number of trimers were formed, thought to be the result of repolymerization.
RESUMO
Lignin is the second most abundant biopolymer in nature and a promising renewable resource for aromatic chemicals. For the understanding of different lignin isolation and conversion processes, the identification of phenolic compounds is of importance. However, given the vast number of possible chemical transformations, the prediction of produced phenolic structures is challenging and a nontargeted analysis method is therefore needed. In this study, a nontargeted analysis method has been developed for the identification of phenolic compounds by using an ultrahigh-performance supercritical fluid chromatography-high-resolution multiple stage tandem mass spectrometry method, combined with a Kendrick mass defect-based classification model. The method is applied to a Lignoboost Kraft lignin (LKL), a sodium lignosulfonate lignin (SLS), and a depolymerized Kraft lignin (DKL) sample. In total, 260 tentative phenolic compounds are identified in the LKL sample, 50 in the SLS sample, and 77 in the DKL sample.
RESUMO
To circumvent the detrimental effects of large-volume injection with fixed-loop injector in modern supercritical fluid chromatography, the feasibility of performing multiple injection was investigated. By accumulating analytes from a certain number of continual small-volume injections, compounds can be concentrated on the column head, and this leads to signal enhancement compared with a single injection. The signal to noise enhancement of different compounds appeared to be associated with their retention on different stationary phases and with type of sample diluent. The diethylamine column gave the best signal to noise enhancement when acetonitrile was used as sample diluent and the 2-picolylamine column showed the best overall performance with water as the sample diluent. The advantage of multiple injection over one-time large-volume injection was proven with sulfanilamide, with both acetonitrile and water as sample diluents. The multiple injection approach exhibited comparable within- and between-day precision of retention time and peak area with those of single injections. The potential of the multiple injection approach was demonstrated in the analysis of sulfanilamide-spiked honey extract and diclofenac-spiked ground water sample. The limitations of this approach were also discussed.
Assuntos
Cromatografia com Fluido Supercrítico , Mel/análise , Poluentes Químicos da Água/análiseRESUMO
SCOPE: Bile acids (BAs) are known to regulate a number of metabolic activities in the body. However, very little is known about how BAs are affected by diet. This study aims to investigate whether a single dose of turmeric-based beverage (TUR) before ingestion of medium- (MF) or high-fat (HF) breakfasts would improve the BA profile in healthy subjects. METHODS AND RESULTS: Twelve healthy subjects are assigned to a randomized crossover single-blind study. The subjects receive isocaloric MF or HF breakfasts after a drink containing flavored water with or without an extract of turmeric with at least 1-week wash-out period between the treatments. Postprandial BAs are measured using protein precipitation followed by ultra-high-performance liquid chromatography-mass spectrometry analysis. The concentration of BAs is generally higher after HF than MF breakfasts. Ingestion of TUR before MF breakfast increases the serum concentrations of free and conjugated forms of cholic (CA) and ursodeoxycholic acids (UDCA), as well as the concentrations of chenodeoxycholic acid (CDCA) and its taurine-conjugated forms. However, the concentration of conjugated forms of deoxycholic acid (DCA) decreases when TUR is taken before HF breakfast. CONCLUSION: TUR ingestion before MF and HF breakfasts improve BA profiles and may therefore have potential health-promoting effects on BA metabolism.
Assuntos
Ácidos e Sais Biliares/sangue , Curcuma , Período Pós-Prandial , Adulto , Área Sob a Curva , Bebidas , Desjejum , Estudos Cross-Over , Dieta Hiperlipídica , Feminino , Voluntários Saudáveis , Humanos , Masculino , Análise MultivariadaRESUMO
On-line hyphenation of extraction with chromatography has been explored in several different types of combinations. However, monitoring the complete process of a dynamic, continuous-flow extraction is not possible with any hyphenated system reported so far. The current work demonstrates that this challenging task can be effectively fulfilled by using a parallel sampling interface, which mimics the concept of comprehensive two-dimensional chromatography. In this study, pressurised hot water extraction was coupled on-line with ultra-high-performance liquid chromatography. The set-up was utilised in a kinetic study of dynamic pressurised hot water extraction of curcuminoids from turmeric powder. Compound-specific extraction curves were obtained, which clearly indicated the rate-limiting factors of the extraction processes under different conditions. Additionally, thermal degradation of curcumin during the extraction could also be demonstrated in some of the extractions.
RESUMO
3-Methyl-1,2,3-butanetricarboxylic acid (MBTCA) is a secondary organic aerosol and can be used as a unique emission marker of biogenic emissions of monoterpenes. Seasonal variations and differences in vegetation cover around the world may lead to low atmospheric MBTCA concentrations, in many cases too low to be measured. Hence, an important tool to quantify the contribution of terrestrial vegetation to the loading of secondary organic aerosol may be compromised. To meet this challenge, a dispersive liquid-liquid microextraction (DLLME) method, known for the extraction of hydrophobic compounds, was extended to the extraction of polar organic compounds like MBTCA without compromising the efficiency of the method. The extraction solvent was fine-tuned using tri-n-octyl phosphine oxide as additive. A multivariate experimental design was applied for deeper understanding of significant variables and interactions between them. The optimum extraction conditions included 1-octanol with 15% tri-n-octyl phosphine oxide (w/w) as extraction solvent, methanol as dispersive solvent, 25% NaCl dissolved in 5 mL sample (w/w) acidified to pH 2 using HNO3, and extraction time of 15 min. A limit of detection of 0.12 pg/m3 in air was achieved. Furthermore, unique complexation behavior of MBTCA with iron(III) was found when analyzed with ultra-high-performance liquid chromatography coupled with electrospray ionization-quadrupole time-of-flight mass spectrometry (UHPLC-ESI-QToF). A comprehensive overview of this complexation behavior of MBTCA was examined with systematically designed experiments. This newly discovered behavior of MBTCA will be of interest for further research on organometallic photooxidation chemistry of atmospheric aerosols. Graphical abstract a) Additive assisted DLLME and MBTCA complexes with Fe(III), b) A good quality figure is attached in ppt format to facilitate editable objects.
RESUMO
Bile acids (BAs) are known to be involved in cholesterol metabolism but interactions between the diet, BA profiles, gut microbiota and lipid metabolism have not been extensively explored. In the present study, primary and secondary BAs including their glycine and taurine-conjugated forms were quantified in serum of Apoe-/- mice by protein precipitation followed by reversed phase ultra-high-performance liquid chromatography and QTOF mass spectrometry. The mice were fed different lingonberry fractions (whole, insoluble and soluble) in a high-fat setting or cellulose in a high and low-fat setting. Serum concentrations of BAs in mice fed cellulose were higher with the high-fat diet compared to the low-fat diet (20-70%). Among the lingonberry diets, the diet containing whole lingonberries had the highest concentration of chenodeoxycholic acid (CDCA), ursodeoxycholic acid (UDCA), tauro-ursodeoxycholic acid (T-UDCA), α and ω-muricholic acids (MCA) and tauro-α-MCA (T-α-MCA), and the lowest concentration of tauro-cholic acid (T-CA), deoxycholic acid (DCA) and tauro-deoxycholic acid (T-DCA). The glycine-conjugated BAs were very similar with all diets. CDCA, UDCA and α-MCA correlated positively with Bifidobacterium and Prevotella, and T-UDCA, T-α-MCA and ω-MCA with Bacteroides and Parabacteroides.
Assuntos
Apolipoproteínas E/metabolismo , Ácidos e Sais Biliares/sangue , Extratos Vegetais/farmacologia , Vaccinium vitis-Idaea , Animais , Apolipoproteínas E/genética , Cromatografia Líquida de Alta Pressão , Dieta Hiperlipídica , Metabolismo dos Lipídeos/fisiologia , Fígado/metabolismo , Camundongos , Camundongos Knockout , Espectrometria de Massas em TandemRESUMO
Kraft lignin is the main source of technically produced lignin. For the development of valuable products based on Kraft lignin, its molecular structure is important. However, the chemical composition of Kraft lignin is still not well known. So far, the analysis of Kraft lignin by mass spectrometry (MS) has been mainly focused on monomeric compounds. Previous MS studies on lignin oligomers (LOs) considered only synthesised LO standards and/or lignins produced by processes other than the Kraft process. Furthermore, published MS methods suffer from using high resolution only in the MS1 stage in multiple-stage tandem MS methods. A high resolution in all MSn stages would provide more detailed information about LO fragmentation pathways. Since lignin samples are complex mixtures of a large number of similar phenolic compounds, the selection of tentative LOs in the MS data is challenging. In this study, we present a method for non-targeted analysis of LOs in Kraft lignin using ultra-high-performance liquid chromatography/high-resolution multiple-stage tandem mass spectrometry (UHPLC/HRMSn). A pre-selection strategy for LOs has been established based on a data-dependent neutral loss MS3 method in combination with a principal component analysis-quadratic discriminant analysis classification model (PCA-QDA). The method was optimised using a design of experiments (DOE) approach. The developed approach improved the pre-selection of tentative LOs in complex mixtures. From 587 detected peaks, 36 peaks were identified as LOs. Graphical abstract á .
Assuntos
Lignina/química , Cromatografia Líquida de Alta Pressão , Estrutura Molecular , Espectrometria de Massas em TandemRESUMO
The performance of seven sub-2-µm particle packed columns (2-picolylamine, 2-PIC; charged surface hybrid fluoro-phenyl, CSH-FP; high strength silica C18 SB, HSS-C18; diethylamine, DEA; 1-aminoanthracene, 1-AA; high density diol and ethylene bridged hybrid; BEH) was examined for lipid separation in ultra-high performance supercritical fluid chromatography (UHPSFC) coupled to quadrupole time-of-flight mass spectrometry. Based on the results of the column screening a method for profiling of multiple lipid species from the major lipid classes was developed. Stationary phases containing ß-hydroxy amines, i.e. 1-AA, DEA and 2-PIC, yielded strong retention and poor peak shapes of zwitterionic lipids with primary amine groups, such as phosphatidylserines, phosphatidylethanolamines and its lyso forms. The BEH and HSS-C18 columns showed strong retention of polar and nonpolar lipids, respectively. The Diol column retained the majority of major lipid classes and also produced symmetric peaks. In addition, this column also produced the highest resolution within and between major lipid classes. An injection solvent composed of methanol:chloroform (1:2, v:v) and the addition of 20â¯mM ammonium formate in the mobile phase improved chromatographic separation and mass spectrometry detection in comparison to ammonium acetate or absence of additive. Finally, chromatographic and mass spectrometric parameters were optimized for the Diol column using a design of experiments approach. The separation mechanism on the Diol column depended on the lipid functionality and the length and degree of unsaturation of the acyl groups. The developed method could resolve 18 lipid classes and multiple lipids within each class, from blood serum and brain tissue in 11â¯min.
Assuntos
Cromatografia com Fluido Supercrítico/métodos , Metabolismo dos Lipídeos , Metabolômica/métodos , Animais , Lipídeos/análise , Espectrometria de Massas , Reprodutibilidade dos Testes , Solventes/química , Sus scrofaRESUMO
Lignin depolymerisation produces a large variety of low molecular weight phenolic compounds that can be upgraded to value-added chemicals. Detailed analysis of these complex depolymerisation mixtures is, however, hampered by the lack of resolving power of traditional analysis techniques. In this study, a novel online comprehensive two-dimensional reversed-phase liquid chromatography (RPLC)â¯×â¯supercritical fluid chromatography (SFC) method with trapping column interface was developed for the separation of phenolic compounds in depolymerised lignin samples. The trapping capacities of different trapping columns were evaluated. The influence of large volume water-containing injection on SFC performance was studied. The relation between peak capacity and first dimension flow rate and gradient was investigated. The optimized method was applied for the analysis of a depolymerised lignin sample. The RPLCâ¯×â¯SFC system exhibited high degree of orthogonality. Compared with traditional loop based interface, trapping column interface can significantly shorten the analysis time and offer higher detectability, with the disadvantage of more severe undersampling in the first dimension.
Assuntos
Técnicas de Química Analítica/instrumentação , Técnicas de Química Analítica/métodos , Cromatografia de Fase Reversa , Cromatografia com Fluido Supercrítico , Lignina/química , Lignina/isolamento & purificação , Fenóis/química , Água/químicaRESUMO
The conversion of lignin to potentially high-value low molecular weight compounds often results in complex mixtures of monomeric and oligomeric compounds. In this study, a method for the quantitative and qualitative analysis of 40 lignin-derived compounds using ultra-high-performance supercritical fluid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPSFC/QTOF-MS) has been developed. Seven different columns were explored for maximum selectivity. Makeup solvent composition and ion source settings were optimised using a D-optimal design of experiment (DoE). Differently processed lignin samples were analysed and used for the method validation. The new UHPSFC/QTOF-MS method showed good separation of the 40 compounds within only 6-min retention time, and out of these, 36 showed high ionisation efficiency in negative electrospray ionisation mode. Graphical abstract A rapid and selective method for the quantitative and qualitative analysis of 40 lignin-derived compounds using ultra-high-performance supercritical fluid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPSFC/QTOF-MS).