A magnetically responsive photonic crystal of graphene oxide nanosheets.

Magnetically responsive photonic crystals of colloidal nanosheets hold great promise for various applications. Here, we systematically investigated the magnetically responsive behavior of a photonic crystal consisting of graphene oxide (GO) nanosheets and water. After applying a 12 T magnetic field perpendicular and parallel to the observation direction, the photonic crystal exhibited a more vivid structural color and no structural color, respectively, based on the magnetic orientation of GO nanosheets. The reflection wavelength can be modulated by varying the GO concentration, and the peak intensity can be basically enhanced by increasing both the time and strength of the magnetic application. To improve color quality, we developed a novel approach of alternately applying a magnetic field to two orthogonal directions, instead of using a rotating magnetic field. Finally, we achieved color switching by changing the direction of applied magnetic fields.

Reconfigurable Photonic Crystal Reversibly Exhibiting Single and Double Structural Colors.

Unlike absorption-based colors of dyes and pigments, reflection-based colors of photonic crystals, so called "structural colors", are responsive to external stimuli, but can remain unfaded for over ten million years, and therefore regarded as a next-generation coloring mechanism. However, it is a challenge to rationally design the spectra of structural colors, where one structure gives only one reflection peak defined by Bragg's law, unlike those of absorption-based colors. Here, we report a reconfigurable photonic crystal that exhibits single-peak and double-peak structural colors. This photonic crystal is composed of a colloidal nanosheet in water, which spontaneously adopts a layered structure with single periodicity (407 nm). After a temperature-gradient treatment, the photonic crystal segregates into two regions with shrunken (385 nm) and expanded (448 nm) periodicities, and thus exhibits double reflection peaks that are blue- and red-shifted from the original one, respectively. Notably, the transition between the single-peak and double-peak states is reversible.

Countercation Engineering of Graphene-Oxide Nanosheets for Imparting a Thermoresponsive Ability.

Graphene-oxide (GO) nanosheets, which are oxidized derivatives of graphene, are regarded as promising building blocks for functional soft materials. Especially, thermoresponsive GO nanosheets have been widely employed to develop smart membranes/surfaces, hydrogel actuators, recyclable systems, and biomedical applications. However, current synthetic strategies to generate such thermoresponsive GO nanosheets have exclusively relied on the covalent or non-covalent modification of their surfaces with thermoresponsive polymers, such as poly(N-isopropylacrylamide). To impart a thermoresponsive ability to GO nanosheets themselves, we focused on the countercations of the carboxy and acidic hydroxy groups on the GO nanosheets. In this study, we established a general and reliable method to synthesize GO nanosheets with target countercations and systematically investigated their effects on thermoresponsive behaviors of GO nanosheets. As a result, we discovered that GO nanosheets with Bu4N+ countercations became thermoresponsive in water without the use of any thermoresponsive polymers, inducing a reversible sol-gel transition via their self-assembly and disassembly processes. Owing to the sol-gel transition capability, the resultant dispersion can be used as a direct writing ink for constructing a three-dimensionally designable gel architecture of the GO nanosheets. Our concept of "countercation engineering" can become a new strategy for imparting a stimuli-responsive ability to various charged nanomaterials for the development of next-generation smart materials.

Mechanical nonreciprocity in a uniform composite material.

Mechanical nonreciprocity, or the asymmetric transmission of mechanical quantities between two points in space, is crucial for developing systems that can guide, damp, and control mechanical energy. We report a uniform composite hydrogel that displays substantial mechanical nonreciprocity, owing to direction-dependent buckling of embedded nanofillers. This material exhibits an elastic modulus more than 60 times higher when sheared in one direction compared with the opposite direction. Consequently, it can transform symmetric vibrations into asymmetric ones that are applicable for mass transport and energy harvest. Furthermore, it exhibits an asymmetric deformation when subjected to local interactions, which can induce directional motion of various objects, including macroscopic objects and even small living creatures. This material could promote the development of nonreciprocal systems for practical applications such as energy conversion and biological manipulation.

Anisotropic fluid with phototunable dielectric permittivity.

Dielectric permittivity, a measure of polarisability, is a fundamental parameter that dominates various physical phenomena and properties of materials. However, it remains a challenge to control the dielectric permittivity of materials reversibly over a large range. Herein, we report an anisotropic fluid with photoresponsive dielectric permittivity (200 < ε < 18,000) consisting of a fluorinated liquid-crystalline molecule (96 wt%) and an azobenzene-tethered phototrigger (4 wt%). The reversible trans-cis isomerisation of the phototrigger under blue and green light irradiation causes a switch between two liquid-crystalline phases that exhibit different dielectric permittivities, with a rapid response time (<30 s) and excellent reversibility (~100 cycles). This anisotropic fluid can be used as a flexible photovariable capacitor that, for example, allows the reversible modulation of the sound frequency over a wide range (100 < f < 8500 Hz) in a remote manner using blue and green wavelengths.

Propagating wave in a fluid by coherent motion of 2D colloids.

Just like in living organisms, if precise coherent operation of tiny movable components is possible, one may generate a macroscopic mechanical motion. Here we report that ~1010 pieces of colloidally dispersed nanosheets in aqueous media can be made to operate coherently to generate a propagating macroscopic wave under a non-equilibrium state. The nanosheets are initially forced to adopt a monodomain cofacial geometry with a large and uniform plane-to-plane distance of ~420 nm, where they are strongly correlated by competitive electrostatic repulsion and van der Waals attraction. When the electrostatic repulsion is progressively attenuated by the addition of ionic species, the nanosheets sequentially undergo coherent motions, generating a propagating wave. This elaborate wave in time and space can transport microparticles over a long distance in uniform direction and velocity. The present discovery may provide a general principle for the design of macroscopically movable devices from huge numbers of tiny components.

Algal biomass production by phosphorus recovery and recycling from wastewater using amorphous calcium silicate hydrates.

The phosphorous supply crisis is a major challenge for a sustainable society, and the algal industry is not unrelated to this crisis. Recycling phosphorus from sewage wastewater is a potential way to address this issue. We previously developed amorphous calcium silicate hydrates (aCSH) as excellent phosphorus recovery materials. In this study, we designed a phosphorus recovery process using aCSH in a pilot-scale facility connected to a sewage wastewater treatment plant, and demonstrated the production of microalgal biomass using phosphorous-containing aCSH (P_aCSH). As a result, high phosphorous recovery rates (>80%) were obtained throughout the year. The carbohydrate-rich microalga Pseudoneochloris sp. NKY372003 was cultivable with P_aCSH. The biomass and carbohydrate productivity of this microalga with P_aCSH was comparable to that with conventional media. Approximately 94% of the phosphorus in P_aCSH was recycled into the biomass. This study successfully demonstrated the recycling the phosphorus recovered from wastewater for microalgal cultivation by aCSH.

A mechanically adaptive hydrogel with a reconfigurable network consisting entirely of inorganic nanosheets and water.

Although various biomimetic soft materials that display structural hierarchies and stimuli responsiveness have been developed from organic materials, the creation of their counterparts consisting entirely of inorganic materials presents an attractive challenge, as the properties of such materials generally differ from those of living organisms. Here, we have developed a hydrogel consisting of inorganic nanosheets (14 wt%) and water (86 wt%) that undergoes thermally induced reversible and abrupt changes in its internal structure and mechanical elasticity (23-fold). At room temperature, the nanosheets in water electrostatically repel one another and self-assemble into a long-periodic lamellar architecture with mutually restricted mobility, forming a physical hydrogel. Upon heating above 55 °C, the electrostatic repulsion is overcome by competing van der Waals attraction, and the nanosheets rearrange into an interconnected 3D network of another hydrogel. By doping the gel with a photothermal-conversion agent, the gel-to-gel transition becomes operable spatiotemporally on photoirradiation.

Molecularly Engineered "Janus GroEL": Application to Supramolecular Copolymerization with a Higher Level of Sequence Control.

Herein we report the synthesis and isolation of a shape-persistent Janus protein nanoparticle derived from the biomolecular machine chaperonin GroEL (AGroELB) and its application to DNA-mediated ternary supramolecular copolymerization. To synthesize AGroELB with two different DNA strands A and B at its opposite apical domains, we utilized the unique biological property of GroEL, i.e., Mg2+/ATP-mediated ring exchange between AGroELA and BGroELB with their hollow cylindrical double-decker architectures. This exchange event was reported more than 24 years ago but has never been utilized for molecular engineering of GroEL. We leveraged DNA nanotechnology to purely isolate Janus AGroELB and succeeded in its precision ternary supramolecular copolymerization with two DNA comonomers, A** and B*, that are partially complementary to A and B in AGroELB, respectively, and programmed to self-dimerize on the other side. Transmission electron microscopy allowed us to confirm the formation of the expected dual-periodic copolymer sequence -(B*/BGroELA/A**/A**/AGroELB/B*)- in the form of a laterally connected lamellar assembly rather than a single-chain copolymer.

One-pot universal initiation-growth methods from a liquid crystalline block copolymer.

The construction of hierarchical nanostructures with precise morphological and dimensional control has been one of the ultimate goals of contemporary materials science and chemistry, and the emulation of tailor-made nanoscale superstructures realized in the nature, using artificial building blocks, poses outstanding challenges. Herein we report a one-pot strategy to precisely synthesize hierarchical nanostructures through an in-situ initiation-growth process from a liquid crystalline block copolymer. The assembly process, analogous to living chain polymerization, can be triggered by small-molecule, macromolecule or even nanoobject initiators to produce various hierarchical superstructures with highly uniform morphologies and finely tunable dimensions. Because of the high degree of controllability and predictability, this assembly strategy opens the avenue to the design and construction of hierarchical structures with broad utility and accessibility.

Extra-Large Mechanical Anisotropy of a Hydrogel with Maximized Electrostatic Repulsion between Cofacially Aligned 2D Electrolytes.

In our previous work, we have shown that "electrostatic forces", when generated anisotropically in aqueous media by 2D electrolytes upon cofacial orientation, enable the formation of a hydrogel with an anisotropic parameter, as defined by the ratio of elastic moduli E⊥ /E∥ , of 3.0. Herein, we successfully developed the design strategy for a hydrogel with an anisotropic parameter of no less than 85. This value is not only 28 times greater than that of our previous anisotropic hydrogel but also 6 times larger than the current champion record in synthetic hydrogels (E⊥ /E∥ ∼15). Firstly, we simply lowered ionic contaminants in the hydrogel and were able to enhance the anisotropic parameter from 3.0 to 18. Then, we chose a supporting polymer network allowing the hydrogel to carry a higher interior permittivity. Consequently, the anisotropic parameter was further enhanced from 18 to 85. Owing to the enhanced mechanical anisotropy, our new hydrogel displayed a superb ability of seismic isolation.

Synthesis of Anisotropic Hydrogels and Their Applications.

Owing to their water-rich structures, which are similar to those of biological tissues, hydrogels have long been regarded as promising scaffolds for artificial tissues and organs. However, in terms of the structural anisotropy, most synthetic hydrogels are substantially different from biological systems. Synthetic hydrogels are usually composed of randomly oriented three-dimensional polymer networks whereas biological systems adopt anisotropic structures with hierarchically integrated building units. Such anisotropic structures often play essential roles in biological systems to exhibit particular functions. In this context, anisotropic hydrogels provide an entry point for exploring biomimetic applications of hydrogels. Reflecting these aspects, an increasing number of studies on anisotropic hydrogels have been reported recently. This Minireview highlights the use and perspectives of these anisotropic hydrogels, particularly focusing on their preparation, structures, and applications.

Photonic water dynamically responsive to external stimuli.

Fluids that contain ordered nanostructures with periodic distances in the visible-wavelength range, anomalously exhibit structural colours that can be rapidly modulated by external stimuli. Indeed, some fish can dynamically change colour by modulating the periodic distance of crystalline guanine sheets cofacially oriented in their fluid cytoplasm. Here we report that a dilute aqueous colloidal dispersion of negatively charged titanate nanosheets exhibits structural colours. In this 'photonic water', the nanosheets spontaneously adopt a cofacial geometry with an ultralong periodic distance of up to 675 nm due to a strong electrostatic repulsion. Consequently, the photonic water can even reflect near-infrared light up to 1,750 nm. The structural colour becomes more vivid in a magnetic flux that induces monodomain structural ordering of the colloidal dispersion. The reflective colour of the photonic water can be modulated over the entire visible region in response to appropriate physical or chemical stimuli.