Development of a Microplate Platform for High-Throughput Sample Preparation Based on Microwave Metasurfaces.

Sample preparation is one of the most time-consuming steps in diagnostic assays, particularly those involving biological samples. In this paper we report the results of finite-difference time-domain (FDTD) simulations and thermographic imaging experiments carried out with the intent of designing a microplate for rapid, high-throughput sample preparation to aid diagnostic assays. This work is based on devices known as microwave lysing triangles (MLTs) that have been proven capable of rapid sample preparation when irradiated in a standard microwave cavity. FDTD software was used to model a microplate platform as a polystyrene substrate with an array of various passive scattering elements (PSEs) of different sizes, shapes, and interelement spacings in a 2.45 GHz field identical to that of a common microwave oven. Based on the FDTD modeling, several PSE arrays were fabricated by cutting PSEs out of aluminum foil and adhering them to the bottom of regular polystyrene microplates to make prototypes. Each prototype microplate was then irradiated in a microwave cavity for a range of different times, powers, and source angles and the heating effects were observed via a forward looking infrared (FLIR) camera. Based on the results, two prototype microplate platforms have been shown to demonstrate electromagnetic and thermal enhancements similar to those seen with MLTs as well as tunable thermal responses to radio frequency (RF) irradiation.

Elucidation of a non-thermal mechanism for DNA/RNA fragmentation and protein degradation when using Lyse-It.

Rapid sample preparation is one of the leading bottlenecks to low-cost and efficient sample component detection. To overcome this setback, a technology known as Lyse-It has been developed to rapidly (less than 60 seconds) lyse Gram-positive and-negative bacteria alike, while simultaneously fragmenting DNA/RNA and proteins into tunable sizes. This technology has been used with a variety of organisms, but the underlying mechanism behind how the technology actually works to fragment DNA/RNA and proteins has hitherto been studied. It is generally understood how temperature affects cellular lysing, but for DNA/RNA and protein degradation, the temperature and amount of energy introduced by microwave irradiation of the sample, cannot explain the degradation of the biomolecules to the extent that was being observed. Thus, an investigation into the microwave generation of reactive oxygen species, in particular singlet oxygen, hydroxyl radicals, and superoxide anion radicals, was undertaken. Herein, we probe one aspect, the generation of reactive oxygen species (ROS), which is thought to contribute to a non-thermal mechanism behind biomolecule fragmentation with the Lyse-It technology. By utilizing off/on (Photoinduced electron transfer) PET fluorescent-based probes highly specific for reactive oxygen species, it was found that as oxygen concentration in the sample and/or microwave irradiation power increases, more reactive oxygen species are generated and ultimately, more oxidation and biomolecule fragmentation occurs within the microwave cavity.

Effects of Lyse-It on endonuclease fragmentation, function and activity.

Nucleases are enzymes that can degrade genomic DNA and RNA that decrease the accuracy of quantitative measures of those nucleic acids. Here, we study conventional heating, standard microwave irradiation, and Lyse-It, a microwave-based lysing technology, for the potential to fragment and inactivate DNA and RNA endonucleases. Lyse-It employs the use of highly focused microwave irradiation to the sample ultimately fragmenting and inactivating RNase A, RNase B, and DNase I. Nuclease size and fragmentation were determined visually and quantitatively by SDS polyacrylamide gel electrophoresis and the mini-gel Agilent 2100 Bioanalyzer system, with a weighted size calculated to depict the wide range of nuclease fragmentation. Enzyme activity assays were conducted, and the rates were calculated to determine the effect of various lysing conditions on each of the nucleases. The results shown in this paper clearly demonstrate that Lyse-It is a rapid and highly efficient way to degrade and inactivate nucleases so that nucleic acids can be retained for down-stream detection.

A comparison of Lyse-It to other cellular sample preparation, bacterial lysing, and DNA fragmentation technologies.

The ability for safe and rapid pathogenic sample transportation and subsequent detection is an increasing challenge throughout the world. Herein, we describe and use bead-beating, vortex, sonication, 903 protein saver cards, and Lyse-It methods, aiming to inactivate Gram-positive and -negative bacteria with subsequent genome DNA (quantitative Polymerase Chain Reaction) qPCR detection. The basic concepts behind the four chosen technologies is their versatility, cost, and ease of use in developed and underdeveloped countries. The four methods target the testing of bacterial resilience, cellular extraction from general and complex media and subsequent DNA extraction for qPCR detection and amplification. These results demonstrate that conventional high temperature heating, 903 protein saver cards, and Lyse-It are all viable options for inactivating bacterial growth for safe shipping. Additionally, Lyse-It was found to be particularly useful as this technology can inactivate bacteria, extract cells from 903 protein saver cards, lyse bacterial cells, and additionally keep genomic DNA viable for qPCR detection.

Rapid sample preparation with Lyse-It® for Listeria monocytogenes and Vibrio cholerae.

Sample preparation is a leading bottleneck in rapid detection of pathogenic bacteria. Here, we use Lyse-It® for bacterial cellular lysis, genomic DNA fragmentation, and protein release and degradation for both Listeria monocytogenes and Vibrio cholerae. The concept of Lyse-It® employs a conventional microwave and Lyse-It® slides for intensely focused microwave irradiation onto the sample. High microwave power and a <60 second irradiation time allow for rapid cellular lysis and subsequent intracellular component release. The pathogenic bacteria are identified by quantitative polymerase chain reaction (qPCR), which subsequently demonstrates the viability of DNA for amplification post microwave-induced lysis. Intracellular component release, degradation, and detection of L. monocytogenes and V. cholerae has been performed and shown in this paper. These results demonstrate a rapid, low-cost, and efficient way for bacterial sample preparation on both food and water-borne Gram-positive and -negative organisms alike.

In Situ Enzymatic Conversion of Nannochloropsis oceanica IMET1 Biomass into Fatty Acid Methyl Esters.

Conventionally, production of methyl ester fuels from microalgae occurs through an energy-intensive two-step chemical extraction and transesterification process. To improve the energy efficiency, we performed in situ enzymatic conversion of whole algae biomass from an oleaginous heterokont microalga Nannochloropsis oceanica IMET1 with the immobilized lipase from Candida antarctica. The fatty acid methyl ester yield reached 107.7% for dry Nannochloropsis biomass at biomass to t-butanol to methanol weight ratio of 1:2:0.5 and a reaction time of 12 h at 25 °C, representing the first report of efficient whole algae biomass conversion into fatty acid methyl esters at room temperature. Different forms of algal biomass including wet Nannochloropsis biomass were tested. The maximum yield of wet biomass was 81.5%. Enzyme activity remained higher than 95% after 55 days of treatment (equal to 110 cycles of reaction) under the conditions optimized for dry algae biomass conversion. The low reaction temperature, high enzyme stability, and high yield from this study indicate in situ enzymatic conversion of dry algae biomass may potentially be used as an energy-efficient method for algal methyl ester fuel production while allowing co-product recovery.

Microwave-accelerated method for ultra-rapid extraction of Neisseria gonorrhoeae DNA for downstream detection.

Nucleic acid-based detection of gonorrhea infections typically require a two-step process involving isolation of the nucleic acid, followed by detection of the genomic target often involving polymerase chain reaction (PCR)-based approaches. In an effort to improve on current detection approaches, we have developed a unique two-step microwave-accelerated approach for rapid extraction and detection of Neisseria gonorrhoeae (gonorrhea, GC) DNA. Our approach is based on the use of highly focused microwave radiation to rapidly lyse bacterial cells, release, and subsequently fragment microbial DNA. The DNA target is then detected by a process known as microwave-accelerated metal-enhanced fluorescence (MAMEF), an ultra-sensitive direct DNA detection analytical technique. In the current study, we show that highly focused microwaves at 2.45 GHz, using 12.3-mm gold film equilateral triangles, are able to rapidly lyse both bacteria cells and fragment DNA in a time- and microwave power-dependent manner. Detection of the extracted DNA can be performed by MAMEF, without the need for DNA amplification, in less than 10 min total time or by other PCR-based approaches. Collectively, the use of a microwave-accelerated method for the release and detection of DNA represents a significant step forward toward the development of a point-of-care (POC) platform for detection of gonorrhea infections.