Highly Stable Biotemplated InP/ZnSe/ZnS Quantum Dots for In Situ Bacterial Monitoring.

Despite their unique optical and electrical characteristics, traditional semiconductor quantum dots (QDs) made of heavy metals or carbon are not ideally suited for biomedical applications. Cytotoxicity and environmental concerns are key limiting factors affecting the adoption of QDs from laboratory research to real-world medical applications. Recently, advanced InP/ZnSe/ZnS QDs have emerged as alternatives to traditional QDs due to their low toxicity and optical properties; however, bioconjugation has remained a challenge due to surface chemistry limitations that can lead to instability in aqueous environments. Here, we report water-soluble, biotemplated InP/ZnSe/ZnS-aptamer quantum dots (QDAPTs) with long-term stability and high selectivity for targeting bacterial membrane proteins. QDAPTs show fast binding reaction kinetics (less than 5 min), high brightness, and high levels of stability (3 months) after biotemplating in aqueous solvents. We use these materials to demonstrate the detection of bacterial membrane proteins on common surfaces using a hand-held imaging device, which attests to the potential of this system for biomedical applications.

Reactive capture of CO2 via amino acid.

Reactive capture of carbon dioxide (CO2) offers an electrified pathway to produce renewable carbon monoxide (CO), which can then be upgraded into long-chain hydrocarbons and fuels. Previous reactive capture systems relied on hydroxide- or amine-based capture solutions. However, selectivity for CO remains low (<50%) for hydroxide-based systems and conventional amines are prone to oxygen (O2) degradation. Here, we develop a reactive capture strategy using potassium glycinate (K-GLY), an amino acid salt (AAS) capture solution applicable to O2-rich CO2-lean conditions. By employing a single-atom catalyst, engineering the capture solution, and elevating the operating temperature and pressure, we increase the availability of dissolved in-situ CO2 and achieve CO production with 64% Faradaic efficiency (FE) at 50 mA cm-2. We report a measured CO energy efficiency (EE) of 31% and an energy intensity of 40 GJ tCO-1, exceeding the best hydroxide- and amine-based reactive capture reports. The feasibility of the full reactive capture process is demonstrated with both simulated flue gas and direct air input.

High-efficiency and thermally stable FACsPbI3 perovskite photovoltaics.

α-FA1-xCsxPbI3 is a promising absorber material for efficient and stable perovskite solar cells (PSCs)1,2. However, the most efficient α-FA1-xCsxPbI3 PSCs require the inclusion of methylammonium chloride (MACl) additive3,4, which generates volatile organic residues (i.e., MA) that limit device stability at elevated temperatures5. To date, the highest certified power-conversion efficiency (PCE) of α-FA1-xCsxPbI3 PSCs without MACl was only ~24% (ref.6,7), and has yet to exhibit any stability advantages. Here, we identify interfacial contact loss caused by the Cs+ accumulation for the conventional α-FA1-xCsxPbI3 PSCs, which deteriorates the device performance and stability. Through in-situ GIWAXS analysis and DFT calculations, we demonstrate an intermediate phase-assisted crystallization pathway enabled by acetate surface coordination to fabricate high-quality α-FA1-xCsxPbI3 film, without using MA-additive. We herein report a certified stabilized power output (SPO) efficiency of 25.94% and a reverse-scanning PCE of 26.64% for α-FA1-xCsxPbI3 PSCs, exhibiting negligible contact losses and enhanced operational stability. The devices retain >95% of their initial PCEs after over 2,000 hours operating at maximum power point under 1 sun, 85 °C, and 60% relative humidity (ISOS-L-3).

Reduced-Dimensional Perovskites: Quantum Well Thickness Distribution and Optoelectronic Properties.

Reduced-dimensional perovskites (RDPs), a large category of metal halide perovskites, have attracted considerable attention and shown high potential in the fields of solid-state displays and lighting. RDPs feature a quantum-well-based structure and energy funneling effects. The multiple quantum well (QW) structure endows RDPs with superior energy transfer and high luminescence efficiency. The effect of QW confinement directly depends on the number of inorganic octahedral layers (QW thickness, i.e., n value), so the distribution of n values determines the optoelectronic properties of RDPs. Here, it is focused on the QW thickness distribution of RDPs, detailing its effect on the structural characteristics, carrier recombination dynamics, optoelectronic properties, and applications in light-emitting diodes. The reported distribution control strategies is also summarized and discuss the current challenges and future trends of RDPs. This review aims to provide deep insight into RDPs, with the hope of advancing their further development and applications.

Acid-Stable Cu Cluster Precatalysts Enable High Energy and Carbon Efficiency in CO2 Electroreduction.

The electrochemical reduction of CO2 in acidic media offers the advantage of high carbon utilization, but achieving high selectivity to C2+ products at a low overpotential remains a challenge. We identified the chemical instability of oxide-derived Cu catalysts as a reason that advances in neutral/alkaline electrolysis do not translate to acidic conditions. In acid, Cu ions leach from Cu oxides, leading to the deactivation of the C2+-active sites of Cu nanoparticles. This prompted us to design acid-stable Cu cluster precatalysts that are reduced in situ to active Cu nanoparticles in strong acid. Operando Raman and X-ray spectroscopy indicated that the bonding between the Cu cluster precatalyst ligand and in situ formed Cu nanoparticles preserves a high density of undercoordinated Cu sites, resulting in a C2H4 Faradaic efficiency of 62% at a low overpotential. The result is a 1.4-fold increase in energy efficiency compared with previous acidic CO2-to-C2+ electrocatalytic systems.

Scaling CO2 Electrolyzer Cell Area from Bench to Pilot.

To contribute meaningfully to carbon dioxide (CO2) emissions reduction, CO2 electrolyzer technology will need to scale immensely. Bench-scale electrolyzers are the norm, with active areas <5 cm2. However, cell areas on the order of 100s or 1000s of cm2 will be required for industrial deployment. Here, we study the effects of increasing cell area, scaling over 2 orders of magnitude from a 5 cm2 lab-scale cell to an 800 cm2 pilot plant-scale cell. A direct scaling of the bench-scale cell architecture to the larger area results in a ∼20% drop in ethylene (C2H4) selectivity and an increase in the parasitic hydrogen (H2) evolution reaction (HER). We instrument an 800 cm2 electrolyzer cell to serve as a diagnostic tool and determine that nonuniformities in electrode compression and flow-influenced local CO2 availability are the key drivers of performance loss upon scaling. Machining of an initial 800 cm2 cell results in a standard deviation in MEA compression that is 7-fold that of a similarly produced 5 cm2 cell (0.009 mm). Using these findings, we redesign an 800 cm2 cell for compression tolerance and increased CO2 transport and achieve an H2 FE in the revised 800 cm2 cell similar to that of the 5 cm2 case (16% at 200 mA cm-2). These results demonstrate that by ensuring uniform compression and fluid flow, the CO2 electrolyzer area can be scaled over 100-fold and retain C2H4 selectivity (within 10% of small-scale selectivity).

Efficient Deep-Blue Light-Emitting Diodes Through Decoupling of Colloidal Perovskite Quantum Dots.

Metal halide perovskite light-emitting diodes (PeLEDs) have exceptional color purity but designs that emit deep-blue color with high efficiency have not been fully achieved and become more difficult in the thin film of confined perovskite colloidal quantum dots (PeQDs) due to particle interaction. Here it is demonstrated that electronic coupling and energy transfer in PeQDs induce redshift in the emission by PeQD film, and consequently hinder deep-blue emission. To achieve deep-blue emission by avoiding electronic coupling and energy transfer, a QD-in-organic solid solution is introduced to physically separate the QDs in the film. This physical separation of QDs reduces the interaction between them yielding a blueshift of ≈7 nm in the emission spectrum. Moreover, using a hole-transporting organic molecule with a deep-lying highest occupied molecular orbital (≈6.0 eV) as the organic matrix, the formation of exciplex emission is suppressed. As a result, an unprecedently high maximum external quantum efficiency of 6.2% at 462 nm from QD-in-organic solid solution film in PeLEDs is achieved, which satisfies the deep-blue color coordinates of CIEy < 0.06. This work suggests an important material strategy to deepen blue emission without reducing the particle size to <≈4 nm.

Resurfacing of InAs Colloidal Quantum Dots Equalizes Photodetector Performance across Synthetic Routes.

The synthesis of highly monodispersed InAs colloidal quantum dots (CQDs) is needed in InAs CQD-based optoelectronic devices. Because of the complexities of working with arsenic precursors such as tris-trimethylsilyl arsine ((TMSi)3As) and tris-trimethylgermyl arsine ((TMGe)3As), several attempts have been made to identify new candidates for synthesis; yet, to date, only the aforementioned two highly reactive precursors have led to excellent photodetector device performance. We begin the present study by investigating the mechanism, finding that the use of the cosurfactant dioctylamine plays a crucial role in producing monodispersed InAs populations. Through quantitative analysis of ligands on the surface of InAs CQDs, we find that (TMGe)3As leads to In-rich characteristics, and we document the presence of an amorphous In-oleate shell on the surface. This we find causes surface defects, and thus, we develop materials processing strategies to remove the surface shell with a view to achieving efficient charge transfer in CQD solids. As a result, we develop resurfacing protocols, tailored to each dot synthesis, that produce balanced In-to-As stoichiometry regardless of synthetic input, enabling us to fabricate NIR photodetectors that achieve best-in-class EQEs at 940 nm excitons (25-28%, biased), independent of the synthetic pathway.

A synthetic cell-free pathway for biocatalytic upgrading of one-carbon substrates.

Biotechnological processes hold tremendous potential for the efficient and sustainable conversion of one-carbon (C1) substrates into complex multi-carbon products. However, the development of robust and versatile biocatalytic systems for this purpose remains a significant challenge. In this study, we report a hybrid electrochemical-biochemical cell-free system for the conversion of C1 substrates into the universal biological building block acetyl-CoA. The synthetic reductive formate pathway (ReForm) consists of five core enzymes catalyzing non-natural reactions that were established through a cell-free enzyme engineering platform. We demonstrate that ReForm works in a plug-and-play manner to accept diverse C1 substrates including CO2 equivalents. We anticipate that ReForm will facilitate efforts to build and improve synthetic C1 utilization pathways for a formate-based bioeconomy.

Two-dimensional perovskitoids enhance stability in perovskite solar cells.

Two-dimensional (2D) and three-dimensional (3D) perovskite heterostructures have played a key role in advancing the performance of perovskite solar cells1,2. However, the migration of cations between 2D and 3D layers results in the disruption of octahedral networks, leading to degradation in performance over time3,4. We hypothesized that perovskitoids, with robust organic-inorganic networks enabled by edge- and face-sharing, could impede ion migration. We explored a set of perovskitoids of varying dimensionality and found that cation migration within perovskitoid-perovskite heterostructures was suppressed compared with the 2D-3D perovskite case. Increasing the dimensionality of perovskitoids improves charge transport when they are interfaced with 3D perovskite surfaces-this is the result of enhanced octahedral connectivity and out-of-plane orientation. The 2D perovskitoid (A6BfP)8Pb7I22 (A6BfP: N-aminohexyl-benz[f]-phthalimide) provides efficient passivation of perovskite surfaces and enables uniform large-area perovskite films. Devices based on perovskitoid-perovskite heterostructures achieve a certified quasi-steady-state power conversion efficiency of 24.6% for centimetre-area perovskite solar cells. We removed the fragile hole transport layers and showed stable operation of the underlying perovskitoid-perovskite heterostructure at 85 °C for 1,250 h for encapsulated large-area devices in ambient air.

Spiky Gold Nanoparticles, a Nanoscale Approach to Enhanced Ex Vivo T-Cell Activation.

While existing synthetic technologies for ex vivo T-cell activation face challenges like suboptimal expansion rates and low effectiveness, artificial antigen-presenting cells (aAPCs) hold great promise for enhanced T-cell based therapies. In particular, gold nanoparticles (AuNPs), known for their biocompatibility, ease of synthesis, and versatile surface chemistry, are strong candidates for use as nanoscale aAPCs. In this study, we developed spiky AuNPs with branched geometries to present activating ligands to primary human T-cells. The special structure of spiky AuNPs enhances biomolecule loading capacity and significantly improves T-cell activation through multivalent binding of costimulatory ligands and receptors. Our spiky AuNPs outperform existing systems including Dynabeads and soluble activators by promoting greater polyclonal expansion of T-cells, boosting sustained cytokine production, and generating highly functional T-cells with reduced exhaustion. In addition, spiky AuNPs effectively activate and expand CD19 CAR-T cells while demonstrating increased in vitro cytotoxicity against target cells using fewer effector cells than Dynabeads. This study underscores the potential of spiky AuNPs as a powerful tool, bringing new opportunities to adoptive cell therapy applications.

Pourbaix Machine Learning Framework Identifies Acidic Water Oxidation Catalysts Exhibiting Suppressed Ruthenium Dissolution.

The demand for green hydrogen has raised concerns over the availability of iridium used in oxygen evolution reaction catalysts. We identify catalysts with the aid of a machine learning-aided computational pipeline trained on more than 36,000 mixed metal oxides. The pipeline accurately predicts Pourbaix decomposition energy (Gpbx) from unrelaxed structures with a mean absolute error of 77 meV per atom, enabling us to screen 2070 new metallic oxides with respect to their prospective stability under acidic conditions. The search identifies Ru0.6Cr0.2Ti0.2O2 as a candidate having the promise of increased durability: experimentally, we find that it provides an overpotential of 267 mV at 100 mA cm-2 and that it operates at this current density for over 200 h and exhibits a rate of overpotential increase of 25 µV h-1. Surface density functional theory calculations reveal that Ti increases metal-oxygen covalency, a potential route to increased stability, while Cr lowers the energy barrier of the HOO* formation rate-determining step, increasing activity compared to RuO2 and reducing overpotential by 40 mV at 100 mA cm-2 while maintaining stability. In situ X-ray absorption spectroscopy and ex situ ptychography-scanning transmission X-ray microscopy show the evolution of a metastable structure during the reaction, slowing Ru mass dissolution by 20× and suppressing lattice oxygen participation by >60% compared to RuO2.

Phenotypic targeting using magnetic nanoparticles for rapid characterization of cellular proliferation regulators.

Genome-wide CRISPR screens have provided a systematic way to identify essential genetic regulators of a phenotype of interest with single-cell resolution. However, most screens use live/dead readout of viability to identify factors of interest. Here, we describe an approach that converts cell proliferation into the degree of magnetization, enabling downstream microfluidic magnetic sorting to be performed. We performed a head-to-head comparison and verified that the magnetic workflow can identify the same hits from a traditional screen while reducing the screening period from 4 weeks to 1 week. Taking advantage of parallelization and performance, we screened multiple mesenchymal cancer cell lines for their dependency on cell proliferation. We found and validated pan- and cell-specific potential therapeutic targets. The method presented provides a nanoparticle-enabled approach means to increase the breadth of data collected in CRISPR screens, enabling the rapid discovery of drug targets for treatment.

Bimetallic Metal Sites in Metal-Organic Frameworks Facilitate the Production of 1-Butene from Electrosynthesized Ethylene.

Converting CO2 to synthetic hydrocarbon fuels is of increasing interest. In light of progress in electrified CO2 to ethylene, we explored routes to dimerize to 1-butene, an olefin that can serve as a building block to ethylene longer-chain alkanes. With goal of selective and active dimerization, we investigate a series of metal-organic frameworks having bimetallic catalytic sites. We find that the tunable pore structure enables optimization of selectivity and that periodic pore channels enhance activity. In a tandem system for the conversion of CO2 to 1-C4H8, wherein the outlet cathodic gas from a CO2-to-C2H4 electrolyzer is fed directly (via a dehumidification stage) into the C2H4 dimerizer, we study the highest-performing MOF found herein: M' = Ru and M″ = Ni in the bimetallic two-dimensional M'2(OAc)4M″(CN)4 MOF. We report a 1-C4H8 production rate of 1.3 mol gcat-1 h-1 and a C2H4 conversion of 97%. From these experimental data, we project an estimated cradle-to-gate carbon intensity of -2.1 kg-CO2e/kg-1-C4H8 when CO2 is supplied from direct air capture and when the required energy is supplied by electricity having the carbon intensity of wind.

Energy transition needs new materials.

The decreasing cost of electricity worldwide from wind and solar energy, as well as that of end-use technologies such as electric vehicles, reflect substantial progress made toward replacing fossil fuels with alternative energy sources. But a full transition to clean energy can only be realized if numerous challenges are overcome. Many problems can be addressed through the discovery of new materials that improve the efficiency of energy production and consumption; reduce the need for scarce mineral resources; and support the production of green hydrogen, clean ammonia, and carbon-neutral hydrocarbon fuels. However, research and development of new energy materials are not as aggressive as they should be to meet the demands of climate change.

Nickel Oxide Hole Injection Layers for Balanced Charge Injection in Quantum Dot Light-Emitting Diodes.

Quantum dot (QD) light-emitting diodes (QLEDs) are promising for next-generation displays, but suffer from carrier imbalance arising from lower hole injection compared to electron injection. A defect engineering strategy is reported to tackle transport limitations in nickel oxide-based inorganic hole-injection layers (HILs) and find that hole injection is able to enhance in high-performance InP QLEDs using the newly designed material. Through optoelectronic simulations, how the electronic properties of NiOx affect hole injection efficiency into an InP QD layer, finding that efficient hole injection depends on lowering the hole injection barrier and enhancing the acceptor density of NiOx is explored. Li doping and oxygen enriching are identified as effective strategies to control intrinsic and extrinsic defects in NiOx, thereby increasing acceptor density, as evidenced by density functional theory calculations and experimental validation. With fine-tuned inorganic HIL, InP QLEDs exhibit a luminance of 45 200 cd m-2 and an external quantum efficiency of 19.9%, surpassing previous inorganic HIL-based QLEDs. This study provides a path to designing inorganic materials for more efficient and sustainable lighting and display technologies.

Ligand-modified nanoparticle surfaces influence CO electroreduction selectivity.

Improving the kinetics and selectivity of CO2/CO electroreduction to valuable multi-carbon products is a challenge for science and is a requirement for practical relevance. Here we develop a thiol-modified surface ligand strategy that promotes electrochemical CO-to-acetate. We explore a picture wherein nucleophilic interaction between the lone pairs of sulfur and the empty orbitals of reaction intermediates contributes to making the acetate pathway more energetically accessible. Density functional theory calculations and Raman spectroscopy suggest a mechanism where the nucleophilic interaction increases the sp2 hybridization of CO(ad), facilitating the rate-determining step, CO* to (CHO)*. We find that the ligands stabilize the (HOOC-CH2)* intermediate, a key intermediate in the acetate pathway. In-situ Raman spectroscopy shows shifts in C-O, Cu-C, and C-S vibrational frequencies that agree with a picture of surface ligand-intermediate interactions. A Faradaic efficiency of 70% is obtained on optimized thiol-capped Cu catalysts, with onset potentials 100 mV lower than in the case of reference Cu catalysts.

Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands.

Inverted (pin) perovskite solar cells (PSCs) afford improved operating stability in comparison to their nip counterparts but have lagged in power conversion efficiency (PCE). The energetic losses responsible for this PCE deficit in pin PSCs occur primarily at the interfaces between the perovskite and the charge-transport layers. Additive and surface treatments that use passivating ligands usually bind to a single active binding site: This dense packing of electrically resistive passivants perpendicular to the surface may limit the fill factor in pin PSCs. We identified ligands that bind two neighboring lead(II) ion (Pb2+) defect sites in a planar ligand orientation on the perovskite. We fabricated pin PSCs and report a certified quasi-steady state PCE of 26.15 and 24.74% for 0.05- and 1.04-square centimeter illuminated areas, respectively. The devices retain 95% of their initial PCE after 1200 hours of continuous 1 sun maximum power point operation at 65°C.

Engineering colloidal semiconductor nanocrystals for quantum information processing.

Quantum information processing-which relies on spin defects or single-photon emission-has shown quantum advantage in proof-of-principle experiments including microscopic imaging of electromagnetic fields, strain and temperature in applications ranging from battery research to neuroscience. However, critical gaps remain on the path to wider applications, including a need for improved functionalization, deterministic placement, size homogeneity and greater programmability of multifunctional properties. Colloidal semiconductor nanocrystals can close these gaps in numerous application areas, following years of rapid advances in synthesis and functionalization. In this Review, we specifically focus on three key topics: optical interfaces to long-lived spin states, deterministic placement and delivery for sensing beyond the standard quantum limit, and extensions to multifunctional colloidal quantum circuits.

Selective Electrified Propylene-to-Propylene Glycol Oxidation on Activated Rh-Doped Pd.

Renewable-energy-powered electrosynthesis has the potential to contribute to decarbonizing the production of propylene glycol, a chemical that is used currently in the manufacture of polyesters and antifreeze and has a high carbon intensity. Unfortunately, to date, the electrooxidation of propylene under ambient conditions has suffered from a wide product distribution, leading to a low faradic efficiency toward the desired propylene glycol. We undertook mechanistic investigations and found that the reconstruction of Pd to PdO occurs, followed by hydroxide formation under anodic bias. The formation of this metastable hydroxide layer arrests the progressive dissolution of Pd in a locally acidic environment, increases the activity, and steers the reaction pathway toward propylene glycol. Rh-doped Pd further improves propylene glycol selectivity. Density functional theory (DFT) suggests that the Rh dopant lowers the energy associated with the production of the final intermediate in propylene glycol formation and renders the desorption step spontaneous, a concept consistent with experimental studies. We report a 75% faradic efficiency toward propylene glycol maintained over 100 h of operation.