A Novel Plenoptic Camera-Based Measurement System for the Investigation into Flight and Combustion Behavior of Refuse-Derived Fuel Particles.

In the past several decades, refuse-derived fuels (RDFs) have been widely applied in industrial combustion processes, for instance, in cement production. Since RDF is composed of various waste fractions with complex shapes, its flight and combustion behaviors can be relatively complicated. In this paper, we present a novel plenoptic camera-based spatial measurement system that uses image processing approaches to determine the dwell time, the space-sliced velocity in the depth direction, and the ignition time of various applied RDF fractions based on the obtained images. The image processing approach follows the concept of tracking-by-detection and includes a novel combined detection method, a 2.5D multiple particle tracking algorithm, and a postprocessing framework to tackle the issues in the initial tracking results. The thereby obtained complete spatial fuel trajectories enable the analysis of the flight behaviors elaborated in the paper. The acquired particles' properties (duration, velocity, and ignition time) reversely prove the availability and applicability of the developed measurement system. The adequacy and accuracy of the proposed novel measurement system are validated by the experiments of detecting and tracking burning and nonburning fuel particles in a rotary kiln. This new measurement system and the provided experimental results can benefit a better understanding of the RDF's combustion for future research.

Determination of char combustion kinetics parameters: comparison of point detector and imaging-based particle-sizing pyrometry.

In this study, the char burnout characteristics of two German coals (a lignite and a high-volatile bituminous coal) were investigated using two different experimental configurations and optical techniques in two distinct laboratories for measurement of temperature and size of burning particles. The optical diagnostic hardware is quite different in the two systems, but both perform two-color pyrometry and optical sizing measurements on individual particles burning in isolation from each other in high-temperature laminar flows to characterize the char consumption kinetics. The performance of the specialized systems is compared for two different combustion atmospheres (with 6.6 and 12 vol.% O2) and gas temperatures between 1700 and 1800 K. The measured particle temperatures and diameters are converted to char burning rate parameters for several residence times during the course of the particles' burnout. The results confirm that comparable results are obtained with the two configurations, although higher levels of variability in the measured data were observed in the imaging-based pyrometer setup. Corresponding uncertainties in kinetics parameters were larger, and appear to be more sensitive to systematic measurement errors when lower oxygen contents are used in the experiments. Consequently, burnout experiments in environments with sufficiently high O2 contents may be used to measure reliable char burning kinetics rates. Based on simulation results for the two coals, O2 concentrations in the range 10%-30% are recommended for kinetic rate measurements on 100 µm particles.