Self-Assembly of a Hierarchical Metal-Organic Framework at the Liquid/Liquid Interface via π-π Stacking Manipulations in Organoplatinum(IV) Complexes for Methanol Fuel Cells.

This study focuses on the facile synthesis of the hierarchical architecture of zeolitic imidazolate framework-8 (ZIF-8) films containing an ultrasmall amount of Pt(0) by investigating the synthesis of different organoplatinum complexes and manipulating the π-π stacking effect in these complexes at the liquid/liquid interface. The organometallic Pt(IV) precursors were complexes with a formula of [PtXMe2(R)(bpy)] (bpy = 2,2'-bipyridine; for complex 2, R = CH2CH═CHC6H5 and X = Br; for complex 3, R = CH2CH═CH2 and X = Br; for complex 4, R = Me and X = I) prepared by oxidative addition of cinnamyl bromide, allyl bromide, or methyl iodide to [PtMe2(bpy)] (complex 1). Different thin films were synthesized starting from three organometallic Pt(IV) precursors (i) by reduction of the Pt complexes at the toluene/water interface (TF2-TF4), (ii) by encapsulation of the Pt precursors in a ZIF-8 (TF5-TF7), and (iii) by reduction of the Pt precursors onto a ZIF-8 (TF8-TF10). The self-assembly of ZIF-8 and different organoplatinum precursors at the interface of two immiscible liquids leads to the preparation of films with well-engineered structures such as rhombic dodecahedra, nanorods, hierarchical architectures, and nanowires, which are very difficult and complicated to synthesize under normal conditions. The ultralow loading of platinum complexes with different degrees of π-π stacking of dangling moieties has a great impact on the structure and morphology (directing agent), which in turn drastically changes the catalytic properties. The obtained films were applied as electrocatalysts for methanol oxidation in fuel cells. The electrocatalytic performance of organoplatinum containing a cinnamyl group in hierarchical architecture TF8 was found to be superior to those of nonhierarchical structures.

{[(E)-(1,3-Benzodioxol-5-yl)methyl-idene]amino}thio-urea.

The synthesis and crystallographic analysis of the title compound, C9H9N3O2S, are reported. The compound crystallizes in the monoclinic space group P21/c, revealing characteristic bond lengths and angles typical of thio-semicarbazone groups. The supra-molecular organization primarily arises from hydrogen bonding and π-π stacking inter-actions, leading to distinctive dimeric formations.

A Commercial Clay-Based Material as a Carrier for Targeted Lysozyme Delivery in Animal Feed.

The controlled supply of bioactive molecules is a subject of debate in animal nutrition. The release of bioactive molecules in the target organ, in this case the intestine, results in improved feed, as well as having a lower environmental impact. However, the degradation of bioactive molecules' in transit in the gastrointestinal passage is still an unresolved issue. This paper discusses the feasibility of a simple and cost-effective procedure to bypass the degradation problem. A solid/liquid adsorption procedure was applied, and the operating parameters (pH, reaction time, and LY initial concentration) were studied. Lysozyme is used in this work as a representative bioactive molecule, while Adsorbo®, a commercial mixture of clay minerals and zeolites which meets current feed regulations, is used as the carrier. A maximum LY loading of 32 mgLY/gAD (LY(32)-AD) was obtained, with fixing pH in the range 7.5-8, initial LY content at 37.5 mgLY/gAD, and reaction time at 30 min. A full characterisation of the hybrid organoclay highlighted that LY molecules were homogeneously spread on the carrier's surface, where the LY-carrier interaction was mainly due to charge interaction. Preliminary release tests performed on the LY(32)-AD synthesised sample showed a higher releasing capacity, raising the pH from 3 to 7. In addition, a preliminary Trolox equivalent antioxidant capacity (TEAC) assay showed an antioxidant capacity for the LY of 1.47 ± 0.18 µmol TroloxEq/g with an inhibition percentage of 33.20 ± 3.94%.

Dark State of the Thiele Hydrocarbon: Efficient Solvatochromic Emission from a Nonpolar Centrosymmetric Singlet Diradicaloid.

In this work, a comprehensive investigation of the photoinduced processes and mechanisms linked to the luminescence of a novel nonperchlorinated Thiele hydrocarbon (TTH) is presented. Despite the comparable diradical character of TTH (y0 = 0.32-0.44) and the unsubstituted Thiele hydrocarbon (TH) (y0 = 0.30), the polyhalogenated species is inert and photostable, showing an intense deep-red/near-infrared (NIR) fluorescence (photoluminescence quantum yield (PLQY) = 0.84 in toluene) even at room temperature and in the solid state (PLQY = 0.19). TTH displays a large Stokes shift (307 nm in benzonitrile) and solvatochromic behavior, which is unusual for a centrosymmetric, nonpolar, and low-conjugated species. These outstanding emission features are interpreted through quantum-chemical calculations, indicating that its fluorescence arises from the low-lying dark doubly excited zwitterionic state, typically found at low excitation energies in diradicaloids, acquiring dipole moment and intensity by state mixing via twisting around the strongly elongated exocyclic CC bonds of the excited p-quinodimethane (pQDM) core, with a mechanism similar to sudden polarization occurring in olefins. Such a mechanism is derived from ns and fs transient absorption measurements.

Use of Chènevotte, a Valuable Co-Product of Industrial Hemp Fiber, as Adsorbent for Pollutant Removal. Part I: Chemical, Microscopic, Spectroscopic and Thermogravimetric Characterization of Raw and Modified Samples.

FINEAU (2021-2024) is a trans-disciplinary research project involving French, Serbian, Italian, Portuguese and Romanian colleagues, a French agricultural cooperative and two surface-treatment industries, intending to propose chènevotte, a co-product of the hemp industry, as an adsorbent for the removal of pollutants from polycontaminated wastewater. The first objective of FINEAU was to prepare and characterize chènevotte-based materials. In this study, the impact of water washing and treatments (KOH, Na2CO3 and H3PO4) on the composition and structure of chènevotte (also called hemp shives) was evaluated using chemical analysis, X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray computed nanotomography (nano-CT), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, solid state NMR spectroscopy and thermogravimetric analysis. The results showed that all these techniques are complementary and useful to characterize the structure and morphology of the samples. Before any chemical treatment, the presence of impurities with a compact unfibrillated structure on the surfaces of chènevotte samples was found. Data indicated an increase in the crystallinity index and significant changes in the chemical composition of each sample after treatment as well as in surface morphology and roughness. The most significant changes were observed in alkaline-treated samples, especially those treated with KOH.

Using a natural chlorite as catalyst in chemical recycling of waste plastics: Hydrolytic depolymerization of poly-[bisphenol A carbonate] promoted by clinochlore.

The present study describes the first example of utilization of a natural clay mineral as catalyst in a process addressed to chemical valorization of poly-[bisphenol A carbonate] (PC; (1)) wastes. A natural clinochlore was investigated for the first time as the catalyst of the hydrolysis reaction of 1, a potential route to chemical recycling of wastes of this polymeric material. At 473 K, in tetrahydrofuran (THF) as the solvent, the mineral promoted effectively the depolymerization (up to 99%, after 6 h) of 1 by H2O and the selective (~99%) regeneration of the monomer bisphenol A (BPA, (2)). Temperature, catalyst loading, reaction time, H2O/PC weight ratio affected markedly the productivity of the process. The role of the catalyst was also focused: the experimental data showed that the exposed brucite-like sheets of clinochlore are involved in the hydrolysis reaction and take active part in promoting the depolymerization process.

Effect of Methyl-ß-Cyclodextrin on the antimicrobial activity of a new series of poorly water-soluble benzothiazoles.

The antibacterial activity of the S-unsubstituted- and S-benzyl-substituted-2-mercapto-benzothiazoles 1-4 has been evaluated after complexation with Methyl-ß-Cyclodextrin (Me-ß-CD) or incorporation in solid dispersions based on Pluronic® F-127 and compared with that of the pure compounds. This with the aim to gain further insights on the possible mechanism(s) involved in the CD-mediated enhancement of antimicrobial effectiveness, a promising methodology to overcome the microbial resistance issue. Together with Differential Scanning Calorimetry, FT-IR spectroscopy and X-ray Powder Diffraction investigations, a molecular modeling study focused on compounds 2 and 4 showed that the S-unsubstituted compound 2/Me-ß-CD complex should be more stable than S-benzyl-substituted 4/Me-ß-CD. Only for 1/Me-ß-CD or, particularly, 2/Me-ß-CD complexes, the antibacterial effectiveness was enhanced in the presence of selected bacterial strains. The results herein presented support the mechanisms focusing on the interactions of the bacterial membrane with CD complexes more than those focusing on the improvement of dissolution properties consequent to CD complexation.

Hydrocarbons in phlogopite from Kasenyi kamafugitic rocks (SW Uganda): cross-correlated AFM, confocal microscopy and Raman imaging.

This study presents a cross-correlated surface and near surface investigation of two phlogopite polytypes from Kasenyi kamafugitic rocks (SW Uganda) by means of advanced Atomic Force Microscopy (AFM), confocal microscopy and Raman micro-spectroscopy. AFM revealed comparable nanomorphology and electrostatic surface potential for the two mica polytypes. A widespread presence of nano-protrusions located on the mica flake surface was also observed, with an aspect ratio (maximum height/maximum width) from 0.01 to 0.09. Confocal microscopy showed these features to range from few nm to several µm in dimension, and shapes from perfectly circular to ellipsoidic and strongly elongated. Raman spectra collected across the bubbles showed an intense and convolute absorption in the range 3000-2800 cm-1, associated with weaker bands at 1655, 1438 and 1297 cm-1, indicating the presence of fluid inclusions consisting of aliphatic hydrocarbons, alkanes and cycloalkanes, with minor amounts of oxygenated compounds, such as carboxylic acids. High-resolution Raman images provided evidence that these hydrocarbons are confined within the bubbles. This work represents the first direct evidence that phlogopite, a common rock-forming mineral, may be a possible reservoir for hydrocarbons.

Use of natural clays as sorbent materials for rare earth ions: Materials characterization and set up of the operative parameters.

Two mineral clays of the montmorillonite group were tested as sorbents for the removal of Rare Earths (REs) from liquid solutions. Lanthanum and neodymium model solutions were used to perform uptake tests in order to: (a) verify the clays sorption capability, (b) investigate the sorption mechanisms and (c) optimize the experimental parameters, such as contact time and pH. The desorption was also studied, in order to evaluate the feasibility of REs recovery from waters. The adsorption-desorption procedure with the optimized parameters was also tested on a leaching solution obtained by dissolution of a dismantled NdFeB magnet of a hard-disk. The clays were fully characterized after REs adsorption and desorption by means of X-ray powder diffraction (XRPD) and X-ray photoelectron spectroscopy (XPS); the liquid phase was characterized via Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) analyses. The experimental results show that both clays are able to capture and release La and Nd ions, with an ion exchange mechanism. The best total efficiency (capture ≈ 50%, release ≈ 70%) is obtained when the uptake and release processes are performed at pH=5 and pH=1 respectively; in real leached scrap solutions, the uptake is around 40% but release efficiency is strongly decreased passing from a mono-ion system to a real system (from 80% to 5%). Furthermore, a strong matrix effect is found, with the matrix largely affecting both the uptake and the release of neodymium.

Synthesis and structure of conjugated molecules with the benzofulvene core.

A general method to synthesize conjugated molecules with a benzofulvene core is reported. Up to four conjugated substituents have been introduced via a three-step sequence including (1) synthesis of 1,2-bis(arylethynyl)benzenes; (2) exo-dig electrophilic cyclization promoted by iodine; and (3) cross-coupling reaction of the resulting bis-iodobenzofulvenes with organoboron, organotin, or ethynyl derivatives under Pd catalysis. Structural aspects of the new compounds are discussed.

Mechanochemical degradation of pentachlorophenol onto birnessite.

The existence of a lot of worldwide pentachlorophenol-contaminated sites has induced scientists to concentrate their effort in finding ways to degrade it. Therefore, an effective tool to decompose it from soil mixtures is needed. In this work the efficiency of the phyllomanganate birnessite (KBi) in degrading pentachlorophenol (PCP) through mechanochemical treatments was investigated. To this purpose, a synthesized birnessite and the pollutant were ground together in a high energy mill. The ground KBi-PCP mixtures and the liquid extracts were analyzed to demonstrate that mechanochemical treatments are more efficient in removing PCP than a simple contact between the synthesized birnessite and the pollutant, both in terms of time and extent. The mechanochemically induced PCP degradation mainly occurs through the formation of a surface monodentate inner-sphere complex between the phenolic group of the organic molecules and the structural Mn(IV). This is indicated by the changes induced in birnessite MnO(6) layers as a consequence of the prolonged milling with the pollutant. This mechanism includes the Mn(IV) reduction, the consequent formation of Mn(III) and new vacancies, and free Mn(2+) ions release. The PCP degradation extent is limited by the presence of chloro-substituents on the aromatic ring.

Mechanochemical transformation of an organic ligand on mineral surfaces: the efficiency of birnessite in catechol degradation.

The aim of this work is to investigate the efficiency of the phyllomanganate birnessite in degrading catechol after mechanochemical treatments. A synthesized birnessite and the organic molecule were grounded together in a high energy mill and the xenobiotic-mineral surface reactions induced by the grinding treatment have been investigated by means of X-ray powder diffraction, X-ray fluorescence, thermal analysis and spectroscopic techniques as well as high-performance liquid chromatography and voltammetric techniques. If compared to the simple contact between the birnessite and the organic molecule, mechanochemical treatments have revealed to be highly efficient in degrading catechol molecules, in terms both of time and extent. Due to the two phenolic groups of catechol and the small steric hindrance of the molecule, the extent of the mechanochemically induced degradation of catechol onto birnessite surfaces is quite high. The degradation mechanism mainly occurs via a redox reaction. It implies the formation of a surface bidentate inner-sphere complex between the phenolic group of the organic molecules and the Mn(IV) from the birnessite structure. Structural changes occur on the MnO(6) layers of birnessite as due to the mechanically induced surface reactions: reduction of Mn(IV), consequent formation of Mn(III) and new vacancies, and free Mn(2+) ions production.

Effect of aging on catalytic properties in mechanochemical degradation of pentachlorophenol by birnessite.

Mechanochemistry, a technique concerning with milling contaminated samples for prolonged times, induces massive degradation of pollutants by grinding them in ball mills with different soil components or additives. In the present study, laboratory experiments were conducted to evaluate the effect of aging on the mechanochemical efficiency of the Mn-oxide birnessite in degrading pentachlorophenol (PCP). A comparative study on an aged birnessite (KBiA), used after 3years from synthesis, and a fresh birnessite (KBiF), employed immediately after synthesis, was carried out. The differences between the two birnessites, evidenced by spectroscopic and diffractometric techniques, are mainly relative to reduction of the Mn(IV) centered at the MnO6 octahedra layers from the birnessite structure, which represent the most reactive sites for PCP degradation. The long term air drying at room temperature, by favouring reduction of Mn(IV) to Mn(III), produces an inorganic substrate that offers paucity of the less reactive sites for PCP degradation, thus reducing the oxidative potential of the KBiA. Accordingly, the more reactive fresh birnessite was employed in the experiment with a polluted soil. Adding a small amount of KBiF to soil only induces a light increase in PCP removal, probably due to the mechanically induced PCP adsorption and transformation onto clay minerals present in the soil. Besides, adding a higher dose of birnessite causes a stronger degradation of PCP.

Ti and Fe speciation by X-ray photoelectron spectroscopy(XPS) and Mössbauer spectroscopy for a full crystal chemical characterisation of Ti-garnets from Colli Albani (Italy).

Different analytical and structural methods (Electron Probe Micro-Analysis, Single Crystal X-ray diffraction, X-ray Photoelectron Spectroscopy, Mössbauer spectroscopy) were combined to fully characterise the crystal chemistry of natural Ti-bearing garnets from Colli Albani (Lazio, Italy). The study of the relevant complex crystal chemistry ( large number of cation substitutions affecting the three independent X(8-fold), Y(6-fold) and Z(4-fold) crystallographic sites and Fe and Ti transition elements exhibiting several oxidation states and coordination environments) benefited from the multi-technique approach. Electron probe microanalysis provided elemental composition of the analysed samples, which have low Ti-content (TiO2 in the range 1.99 - 3.48 wt %) and slightly different Fe/Al ratios. For all samples, two doublets were fitted to room temperature Mössbauer spectra and assigned to Fe3+(Y) (approximately 95%) and Fe2+(X) (approximately 5%). Up to three doublets (Ti3+(Y), Ti4+(Y), Ti4+(Z)) were fitted to XPS spectra and yielded direct evaluation of Ti site population. XPS technique confirmed its potential for the study of speciation of Ti in minerals.

Stereoselective synthesis of tetrasubstituted 2,3-dihydrofurans by one-step cyclization of beta-ketosulfides of benzothiazole and aldehydes in ionic liquids.

A stereoselective synthesis of tetrasubstituted 2,3-dihydrofurans was carried out in n-butylpyridinium tetrafluoroborate ([bpy(+)][BF(4)(-)]) as solvent. The reaction proceeds smoothly in one step starting from simple materials such as aldehydes and beta-ketosulfides of benzothiazole. A comparison between several ionic liquids (ILs) is presented, and the role of the benzothiazolyl moiety is discussed. Workup proved to be very easy and recycling of IL possible.