Development of a morphogenetically active scaffold for three-dimensional growth of bone cells: biosilica-alginate hydrogel for SaOS-2 cell cultivation.

Polymeric silica is formed from ortho-silicate during a sol-gel formation process, while biosilica is the product of an enzymatically driven bio-polycondensation reaction. Both polymers have recently been described as a template that induces an increased expression of the genes encoding bone morphogenetic protein 2 (BMP-2) and osteoprotegerin in osteoblast-related SaOS-2 cells; simultaneously or subsequently the cells respond with enhanced hydroxyapatite formation. In order to assess whether the biocompatible polymeric silica/biosilica can serve as a morphogenetically active matrix suitable for three-dimensional (3D) cell growth, or even for 3D cell bioprinting, SaOS-2 cells were embedded into a Na-alginate-based hydrogel. Four different gelatinous hydrogel matrices were used for suspending SaOS-2 cells: (a) the hydrogel alone; (b) the hydrogel with 400 µM ortho-silicate; (c) the hydrogel supplemented with 400 µM ortho-silicate and recombinant silicatein to allow biosilica synthesis to occur; and (d) the hydrogel with ortho-silicate and BSA. The SaOS-2 cells showed an increased growth if silica/biosilica components were present in the hydrogel. Likewise intensified was the formation of hydroxyapatite nodules in the silica-containing hydrogels. After an incubation period of 2 weeks, cells present in silica-containing hydrogels showed a significantly higher expression of the genes encoding the cytokine BMP-2, the major fibrillar structural protein collagen 1 and likewise of carbonic anhydrase. It is concluded that silica, and to a larger extent biosilica, retains its morphogenetic/osteogenic potential after addition to Na-alginate-based hydrogels. This property might qualify silica hydrogels to be also used as a matrix for 3D cell printing.

The marine sponge-derived inorganic polymers, biosilica and polyphosphate, as morphogenetically active matrices/scaffolds for the differentiation of human multipotent stromal cells: potential application in 3D printing and distraction osteogenesis.

The two marine inorganic polymers, biosilica (BS), enzymatically synthesized from ortho-silicate, and polyphosphate (polyP), a likewise enzymatically synthesized polymer consisting of 10 to >100 phosphate residues linked by high-energy phosphoanhydride bonds, have previously been shown to display a morphogenetic effect on osteoblasts. In the present study, the effect of these polymers on the differential differentiation of human multipotent stromal cells (hMSC), mesenchymal stem cells, that had been encapsulated into beads of the biocompatible plant polymer alginate, was studied. The differentiation of the hMSCs in the alginate beads was directed either to the osteogenic cell lineage by exposure to an osteogenic medium (mineralization activation cocktail; differentiation into osteoblasts) or to the chondrogenic cell lineage by incubating in chondrocyte differentiation medium (triggering chondrocyte maturation). Both biosilica and polyP, applied as Ca²âº salts, were found to induce an increased mineralization in osteogenic cells; these inorganic polymers display also morphogenetic potential. The effects were substantiated by gene expression studies, which revealed that biosilica and polyP strongly and significantly increase the expression of bone morphogenetic protein 2 (BMP-2) and alkaline phosphatase (ALP) in osteogenic cells, which was significantly more pronounced in osteogenic versus chondrogenic cells. A differential effect of the two polymers was seen on the expression of the two collagen types, I and II. While collagen Type I is highly expressed in osteogenic cells, but not in chondrogenic cells after exposure to biosilica or polyP, the upregulation of the steady-state level of collagen Type II transcripts in chondrogenic cells is comparably stronger than in osteogenic cells. It is concluded that the two polymers, biosilica and polyP, are morphogenetically active additives for the otherwise biologically inert alginate polymer. It is proposed that alginate, supplemented with polyP and/or biosilica, is a suitable biomaterial that promotes the growth and differentiation of hMSCs and might be beneficial for application in 3D tissue printing of hMSCs and for the delivery of hMSCs in fractures, surgically created during distraction osteogenesis.

Enzyme-accelerated and structure-guided crystallization of calcium carbonate: role of the carbonic anhydrase in the homologous system.

The calcareous spicules from sponges, e.g. from Sycon raphanus, are composed of almost pure calcium carbonate. In order to elucidate the formation of those structural skeletal elements, the function of the enzyme carbonic anhydrase (CA), isolated from this species, during the in vitro calcium carbonate-based spicule formation, was investigated. It is shown that the recombinant sponge CA substantially accelerates calcium carbonate formation in the in vitro diffusion assay. A stoichiometric calculation revealed that the turnover rate of the sponge CA during the calcification process amounts to 25 CO2s(-1) × molecule CA(-1). During this enzymatically driven process, initially pat-like particles are formed that are subsequently transformed to rhomboid/rhombohedroid crystals with a dimension of ~50 µm. The CA-catalyzed particles are smaller than those which are formed in the absence of the enzyme. The Martens hardness of the particles formed is ~4 GPa, a value which had been determined for other biogenic calcites. This conclusion is corroborated by energy-dispersive X-ray spectroscopy, which revealed that the particles synthesized are composed predominantly of the elements calcium, oxygen and carbon. Surprising was the finding, obtained by light and scanning electron microscopy, that the newly formed calcitic crystals associate with the calcareous spicules from S. raphanus in a highly ordered manner; the calcitic crystals almost perfectly arrange in an array orientation along the two opposing planes of the spicules, leaving the other two plane arrays uncovered. It is concluded that the CA is a key enzyme controlling the calcium carbonate biomineralization process, which directs the newly formed particles to existing calcareous spicular structures. It is expected that with the given tools new bioinspired materials can be fabricated.

Modulation of the initial mineralization process of SaOS-2 cells by carbonic anhydrase activators and polyphosphate.

Ca-phosphate/hydroxyapatite (HA) crystals constitute the mineral matrix of vertebrate bones, while Ca-carbonate is the predominant mineral of many invertebrates, like mollusks. Recent results suggest that CaCO3 is also synthesized during early bone formation. We demonstrate that carbonic anhydrase-driven CaCO3 formation in vitro is activated by organic extracts from the demosponge Suberites domuncula as well as by quinolinic acid, one component isolated from these extracts. Further results revealed that the stimulatory effect of bicarbonate (HCO3 (-)) ions on mineralization of osteoblast-like SaOS-2 cells is strongly enhanced if the cells are exposed to inorganic polyphosphate (polyP), a linear polymer of phosphate linked by energy-rich phosphodiester bonds. The effect of polyP, administered as polyP (Ca²âº salt), on HA formation was found to be amplified by addition of the carbonic anhydrase-activating sponge extract or quinolinic acid. Our results support the assumption that CaCO3 deposits, acting as bio-seeds for Ca-carbonated phosphate formation, are formed as an intermediate during HA mineralization and that the carbonic anhydrase-mediated formation of those deposits is under a positive-negative feedback control by bone alkaline phosphatase-dependent polyP metabolism, offering new targets for therapy of bone diseases/defects.

The enzyme carbonic anhydrase as an integral component of biogenic Ca-carbonate formation in sponge spicules.

The inorganic scaffold of the spicules, the skeletal elements of the calcareous sponges, is formed of calcium carbonate (CaCO3). The growth of the approximately 300-µm large spicules, such as those of the calcareous sponge Sycon raphanus used in the present study, is a rapid process with a rate of about 65 µm/h. The formation of CaCO3 is predominantly carried out by the enzyme carbonic anhydrase (CA). The enzyme from the sponge S. raphanus was isolated and prepared by recombination. The CA-driven deposition of CaCO3 crystallites is dependent on temperature (optimal at 52 °C), the pH value of the reaction assay (7.5/8.0), and the substrate concentration (CO2 and Ca(2+)). During the initial phase of crystallite formation, ≈40 µm large round-shaped deposits are formed that remodel to larger prisms. These crystal-like prisms associate to each other and form either rope-/bundle-like aggregates or arrange perfectly with their smaller planes along opposing surfaces of the sponge spicule rays. The CA-dependent CaCO3 deposition can be inhibited by the CA-specific inhibitor acetazolamide. The Michaelis-Menten constant for the CA-driven mineralization has been determined to be around 8 mM with respect to CaCO3. The deposits formed have a Martens hardness of ≈5 GPa. The data presented here highlights for the first time that calcite deposition in the sponge system is decisively controlled enzymatically. This data will contribute to the development of new strategies applicable for the fabrication of novel biomaterials.

Induction of carbonic anhydrase in SaOS-2 cells, exposed to bicarbonate and consequences for calcium phosphate crystal formation.

Ca-phosphate/hydroxyapatite crystals constitute the mineralic matrix of vertebrate bones, while Ca-carbonate dominates the inorganic matrix of otoliths. In addition, Ca-carbonate has been identified in lower percentage in apatite crystals. By using the human osteogenic SaOS-2 cells it could be shown that after exposure of the cells to Ca-bicarbonate in vitro, at concentrations between 1 and 10 mm, a significant increase of Ca-deposit formation results. The crystallite nodules formed on the surfaces of SaOS-2 cells become denser and larger in the presence of bicarbonate if simultaneously added together with the mineralization activation cocktail (ß-glycerophosphate/ascorbic acid/dexamethasone). In parallel, with the increase of Ca-deposit formation, the expression of the carbonic anhydrase-II (CA-II) gene becomes upregulated. This effect, measured on transcriptional level is also substantiated by immunohistological studies. The stimulatory effect of bicarbonate on Ca-deposit formation is prevented if the carbonic anhydrase inhibitor acetazolamide is added to the cultures. Mapping the surface of the Ca-deposit producing SaOS-2 cells by scanning electron microscopy coupled with energy-dispersive X-ray analysis revealed an accumulation of the signals for the element carbon and, as expected, also for phosphorus. Finally, it is shown that ortho-phosphate and hydrolysis products of polyphosphate inhibit CA-II activity, suggesting a feedback regulatory system between the CA-driven Ca-carbonate deposition and a subsequent inactivation of this process by ortho-phosphate. Based on the presented data we suggest that Ca-carbonate deposits act as bioseeds for a downstream Ca-phosphate deposition process. We propose that activators for CA, especially for CA-II, might be beneficial for the treatment of bone deficiency diseases.

The silicatein propeptide acts as inhibitor/modulator of self-organization during spicule axial filament formation.

Silicateins are crucial enzymes that are involved in formation of the inorganic biosilica scaffold of the spicular skeleton of siliceous sponges. We show that silicatein acquires its structure-guiding and enzymatically active state by processing of silicatein from pro-silicatein to the mature enzyme. A recombinant propeptide (PROP) of silicatein from the siliceous demosponge Suberites domuncula was prepared, and antibodies were raised against the peptide. In sponge tissue, these antibodies reacted with both surface structures and the central region of the spicules. Using phage display expression, spicule-binding 12-mer peptides were identified that are rich in histidine residues. In the predicted tertiary structure of PROP, these histidine residues are only present in the α-helical region. The recombinant PROP was found to inhibit self-assembly of silicatein molecules. By light scattering, it was shown that, in the presence of 4 m urea, the recombinant silicatein is obtained in the mono/oligomeric form with a hydrodynamic radius of 4 nm, while lower urea concentrations promote self-aggregation and assembly of the protein. Finally, it is shown that the enzymatic activity of silicatein is abolished by PROP in silicatein samples that predominantly contain mono- or oligomeric silicatein particles, but the enzyme is not affected if present in the filamentous aggregated form. It is concluded that the functions of silicatein, acting as a structural template for its biosilica product and as an enzyme, are modulated and controlled by its propeptide.

Biosilica aging: from enzyme-driven gelation via syneresis to chemical/biochemical hardening.

BACKGROUND: The distinguished property of the siliceous sponge spicules is their enzyme (silicatein)-catalyzed biosilica formation. The enzymatically formed, non-structured biosilica product undergoes a molding, syneresis, and hardening process to form the species-specifically shaped, hard structured skeletal spicules. Besides of silicatein, a silicatein-associated protein, silintaphin-2, is assumed to be involved in the process of biosilica formation in vivo. METHODS: Biosilica has been synthesized enzymatically and determined quantitatively. In addition, the subsequent hardening/aging steps have been followed by spectroscopic and electron microscopic analyses. RESULTS: The young spicules, newly formed in sponge cell aggregates, comprise high concentrations of sodium (~1w/w%) and potassium (0.3%). During aging the two alkali metals are removed from the spicules by 80%. In parallel, water is withdrawn from the biosilica deposits. A protein, the silicatein-α interactor silintaphin-2, comprises clusters rich in the anionic amino acids aspartic acid [D] and glutamic acid [E]. The very acidic peptide was found to significantly enhance silica polymerization. This peptide also caused a strong aggregation of silicatein/biosilica particles. CONCLUSIONS: The observations are explained by sodium ion removal from the initially formed biosilica deposits to the acidic amino acids in silintaphin-2. The crucial amino acids facilitating/forcing the silicatein-mediated biosilica reaction are D and E. GENERAL SIGNIFICANCE: The data presented here provide a reaction mechanism that at neutral pH the extent of biosilica formation can be strongly intensified by the removal of cations. The results contribute to an understanding of the structuring process taking place during the formation of the solid spicule rods.

Dual effect of inorganic polymeric phosphate/polyphosphate on osteoblasts and osteoclasts in vitro.

Inorganic polymeric phosphate/polyphosphate (polyP) is a natural polymer existing in both pro- and eukaryotic systems. In the present study the effect of polyP as well as of polyP supplied in a stoichiometric ratio of 2 m polyP:1 m CaCl2 [polyP (Ca(2+) complex)] on the osteoblast-like SaOS-2 cells and the osteoclast-like RAW 264.7 cells was determined. Both polymers are non-toxic for these cells up to a concentration of 100 µm. In contrast to polyP, polyP (Ca(2+) complex) significantly induced hydroxyapatite formation at a concentration > 10 µm, as documented by alizarin red S staining and scanning electron microscopic (SEM) inspection. Furthermore, polyP (Ca(2+) complex) triggered in SaOS-2 cells transcription of BMP2 (bone morphogenetic protein 2), a cytokine involved in maturation of hydroxyapatite-forming cells. An additional activity of polyP (Ca(2+) complex) is described by showing that this polymer impairs osteoclastogenesis. At concentrations > 10 µm polyP (Ca(2+) complex) slows down the progression of RAW 264.7 cells to functional osteoclasts, as measured by the expression of TRAP (tartrate-resistant acid phosphatase). Finally, it is shown that 10-100 µm polyP (Ca(2+) complex) inhibited phosphorylation of IκBα by the respective kinase in RAW 264.7 cells. We concluded that polyP (Ca(2+) complex) displays a dual effect on bone metabolizing cells. It promotes hydroxyapatite formation in SaOS-2 cells (osteoblasts) and impairs maturation of the osteoclast-related RAW 264.7 cells.

Hierarchical composition of the axial filament from spicules of the siliceous sponge Suberites domuncula: from biosilica-synthesizing nanofibrils to structure- and morphology-guiding triangular stems.

The major structural and enzymatically active protein in spicules from siliceous sponges, e.g., for Suberites domuncula studied here, is silicatein. Silicatein has been established to be the key enzyme that catalyzes the formation of biosilica, a polymer that represents the inorganic scaffold for the spicule. In the present study, it is shown, by application of high-resolution transmission and scanning transmission electron microscopy that, during the initial phase of spicule synthesis, nanofibrils with a diameter of around 10 nm are formed that comprise bundles of between 10 and 20 nanofibrils. In intracellular vacuoles, silicasomes, the nanofibrils form polar structures with a pointed tip and a blunt end. In a time-dependent manner, these nanofibrillar bundles become embedded into a Si-rich matrix, indicative for the formation of biosilica via silicatein molecules that form the nanofibrils. These biosilicified nanofibrillar bundles become extruded from the intracellular space, where they are located in the silicasomes, to the extracellular environment by an evagination process, during which a cellular protrusion forms the axial canal in the growing spicule. The nanofibrillar bundles condense and progressively form the axial filament that becomes localized in the extracellular space. It is concluded that the silicatein-composing nanofibrils act not only as enzymatic silica bio-condensing platforms but also as a structure-giving guidance for the growing spicule.

Silica as a morphogenetically active inorganic polymer.

At present the scaffolds used for bioprinting of cells do not elicit morphogenetic responses in the cells. In the present study we approached a solution by studying the effect of an inorganic silica supplement added to an Na-alginate matrix. Bone- and osteoblast-like SaOS-2 cells were embedded into this organic polymeric matrix which was additionally enriched with 400 µM prehydrolyzed TEOS [tetra-ethoxy-silane], a source of ortho-silicate. In this silica-based matrix the cells synthesized hydroxyapatite crystallites after exposure to a mineralization activation cocktail composed of ß-glycerophosphate, ascorbic acid and dexamethasone. The degree of hydroxyapatite synthesis, determined by staining the cells with the OsteoImage dye, strongly increased after exposure of the cells to silica. In a previous study we reported that ortho-silicate induces the expression of the gene encoding BMP-2 [bone morphogenetic protein-2]. Now we asked the question whether, in the presence of the mineralization activation cocktail, silica induces differentially the fibrillar proteins type I collagen [COLI] and type V collagen [COLV], as well as the non-collagenous proteins alkaline phosphatase [ALP], osteopontin [OPN], osteonectin [ON], osteocalcin [OC], and bone sialoprotein II [BSP]. Those expression values were correlated with the transcript levels of RUNX2 [Runt-related transcription factor 2]. The data show that the steady-state transcript level of RUNX2 remained unchanged in the presence of silica, while this inorganic polymer caused an elevated BMP-2 transcript level, and simultaneously also a significant upregulation of the COLI, COLV, OPN and ON genes. In contrast, the level of expression of OC and BSP remained unchanged in the presence of silica. It is concluded that silica causes its morphogenetic effect with respect to some bone-specific genes, COLI, COLV, OPN and ON, in a RUNX2-independent way.

Osteogenic potential of a biosilica-coated P(UDMA-co-MPS) copolymer.

A P(UDMA-co-MPS) copolymer was surface-functionalized through the polycondensation activity of the enzyme silicatein. The resulting biosilica coating significantly enhanced mineralization of osteoblastic cells, thereby revealing its osteogenic potential. Consequently, the functionalized copolymer may be explored as an alternative to conventionally used acrylics in applications where stable bone-material interfaces are required.

Biogenic inorganic polysilicates (biosilica): formation and biomedical applications.

The siliceous sponges, the demosponges and hexactinellid glass sponges, are unique in their ability to form biosilica structures with complex architectures through an enzyme-catalyzed mechanism. The biosilica skeleton of these sponges with its hierarchically structure and exceptional opto-mechanical properties has turned out to be an excellent model for the design of biomimetic nanomaterials with novel property combinations. In addition, biosilica shows morphogenetic activity that offers novel applications in the field of bone tissue engineering and repair. In recent years, much progress has been achieved towards the understanding of the principal enzymes, the silicateins that form the sponge skeletal elements, the spicules, and their self-assembling and structure-guiding properties. The discovery of the silicatein-interacting, scaffolding proteins provided new insights in the mechanism of spiculogenesis. The now available toolbox of enzymes and proteins that are involved in biosilica formation and the biosilica material synthesized by them are of great interest for a variety of applications from nanobiotechnology to nanomedicine.

Inorganic polyphosphates: biologically active biopolymers for biomedical applications.

Inorganic polyphosphate (polyP) is a widely occurring but only rarely investigated biopolymer which exists in both prokaryotic and eukaryotic organisms. Only in the last few years, this polymer has been identified to cause morphogenetic activity on cells involved in human bone formation. The calcium complex of polyP was found to display a dual effect on bone-forming osteoblasts and bone-resorbing osteoclasts. Exposure of these cells to polyP (Ca(2+) complex) elicits the expression of cytokines that promote the mineralization process by osteoblasts and suppress the differentiation of osteoclast precursor cells to the functionally active mature osteoclasts dissolving bone minerals. The effect of polyP on bone formation is associated with an increased release of the bone morphogenetic protein 2 (BMP-2), a key mediator that activates the anabolic processes leading to bone formation. In addition, polyP has been shown to act as a hemostatic regulator that displays various effects on blood coagulation and fibrinolysis and might play an important role in platelet-dependent proinflammatory and procoagulant disorders.

Nocturnin in the demosponge Suberites domuncula: a potential circadian clock protein controlling glycogenin synthesis in sponges.

Sponges are filter feeders that consume a large amount of energy to allow a controlled filtration of water through their aquiferous canal systems. It has been shown that primmorphs, three-dimensional cell aggregates prepared from the demosponge Suberites domuncula and cultured in vitro, change their morphology depending on the light supply. Upon exposure to light, primmorphs show a faster and stronger increase in DNA, protein and glycogen content compared with primmorphs that remain in the dark. The sponge genome contains nocturnin, a light/dark-controlled clock gene, the protein of which shares a high sequence similarity with the related molecule of higher metazoans. The sponge nocturnin protein was found showing a poly(A)-specific 3'-exoribonuclease activity. In addition, the cDNA of the glycogenin gene was identified for subsequent expression studies. Antibodies against nocturnin were raised and used in parallel with the cDNA to determine the regional expression of nocturnin in intact sponge specimens; the highest expression of nocturnin was seen in the epithelial layer around the aquiferous canals. Quantitative PCR analyses revealed that primmorphs after transfer from light to dark show a 10-fold increased expression in the nocturnin gene. In contrast, the expression level of glycogenin decreases in the dark by 3-4-fold. Exposure of primmorphs to light causes a decrease in nocturnin transcripts and a concurrent increase in glycogenin transcripts. It was concluded that sponges are provided with the molecular circadian clock protein nocturnin that is highly expressed in the dark where it controls the stability of a key metabolic enzyme, glycogenin.

Biosilica: Molecular Biology, Biochemistry and Function in Demosponges as well as its Applied Aspects for Tissue Engineering.

Biomineralization, biosilicification in particular (i.e. the formation of biogenic silica, SiO(2)), has become an exciting source of inspiration for the development of novel bionic approaches following 'nature as model'. Siliceous sponges are unique among silica-forming organisms in their ability to catalyze silica formation using a specific enzyme termed silicatein. In this study, we review the present state of knowledge on silicatein-mediated 'biosilica' formation in marine demosponges, the involvement of further molecules in silica metabolism and their potential applications in nano-biotechnology and bio-medicine. While most forms of multicellular life have developed a calcium-based skeleton, a few specialized organisms complement their body plan with silica. Only sponges (phylum Porifera) are able to polymerize silica enzymatically mediated in order to generate massive siliceous skeletal elements (spicules) during a unique reaction, at ambient temperature and pressure. During this biomineralization process (i.e. biosilicification), hydrated, amorphous silica is deposited within highly specialized sponge cells, ultimately resulting in structures that range in size from micrometres to metres. This peculiar phenomenon has been comprehensively studied in recent years, and in several approaches, the molecular background was explored to create tools that might be employed for novel bioinspired biotechnological and biomedical applications. Thus, it was discovered that spiculogenesis is mediated by the enzyme silicatein and starts intracellularly. The resulting silica nanoparticles fuse and subsequently form concentric lamellar layers around a central protein filament, consisting of silicatein and the scaffold protein silintaphin-1. Once the growing spicule is extruded into the extracellular space, it obtains final size and shape. Again, this process is mediated by silicatein and silintaphin-1/silintaphin-1, in combination with other molecules such as galectin and collagen. The molecular toolbox generated so far allows the fabrication of novel micro- and nano-structured composites, contributing to the economical and sustainable synthesis of biomaterials with unique characteristics. In this context, first bioinspired approaches implement recombinant silicatein and silintaphin-1 for applications in the field of biomedicine (biosilica-mediated regeneration of tooth and bone defects) with promising results.

Acquisition of structure-guiding and structure-forming properties during maturation from the pro-silicatein to the silicatein form.

Silicateins are the key enzymes involved in the enzymatic polycondensation of the inorganic scaffold of the skeletal elements of the siliceous sponges, the spicules. The gene encoding pro-silicatein is inserted into the pCold TF vector, comprising the gene for the bacterial trigger factor. This hybrid gene is expressed in Escherichia coli and the synthesized fusion protein is purified. The fusion protein is split into the single proteins with thrombin by cleavage of the linker sequence present between the two proteins. At 23 °C, the 87 kDa trigger factor-pro-silicatein fusion protein is cleaved to the 51 kDa trigger factor and the 35 kDa pro-silicatein. The cleavage process proceeds and results in the release of the 23 kDa mature silicatein, a process which very likely proceeds by autocatalysis. Almost in parallel with its formation, the mature enzyme precipitates as pure 23 kDa protein. When the precipitate is dissolved in an urea buffer, the solubilized protein displays its full enzymatic activity which is enhanced multi-fold in the presence of the silicatein interactor silintaphin-1 or of poly(ethylene glycol) (PEG). The biosilica product formed increases its compactness if silicatein is supplemented with silintaphin-1 or PEG. The elastic modulus of the silicatein-mediated biosilica product increases in parallel with the addition of silintaphin-1 and/or PEG from 17 MPa (silicatein) via 61 MPa (silicatein:silintaphin-1) to 101 MPa (silicatein:silintaphin-1 and PEG). These data show that the maturation process from the pro-silicatein state to the mature form is the crucial step during which silicatein acquires its structure-guiding and structure-forming properties.

Common genetic denominators for Ca++-based skeleton in Metazoa: role of osteoclast-stimulating factor and of carbonic anhydrase in a calcareous sponge.

Calcium-based matrices serve predominantly as inorganic, hard skeletal systems in Metazoa from calcareous sponges [phylum Porifera; class Calcarea] to proto- and deuterostomian multicellular animals. The calcareous sponges form their skeletal elements, the spicules, from amorphous calcium carbonate (ACC). Treatment of spicules from Sycon raphanus with sodium hypochlorite (NaOCl) results in the disintegration of the ACC in those skeletal elements. Until now a distinct protein/enzyme involved in ACC metabolism could not been identified in those animals. We applied the technique of phage display combinatorial libraries to identify oligopeptides that bind to NaOCl-treated spicules: those oligopeptides allowed us to detect proteins that bind to those spicules. Two molecules have been identified, the (putative) enzyme carbonic anhydrase and the (putative) osteoclast-stimulating factor (OSTF), that are involved in the catabolism of ACC. The complete cDNAs were isolated and the recombinant proteins were prepared to raise antibodies. In turn, immunofluorescence staining of tissue slices and qPCR analyses have been performed. The data show that sponges, cultivated under standard condition (10 mM CaCl(2)) show low levels of transcripts/proteins for carbonic anhydrase or OSTF, compared to those animals that had been cultivated under Ca(2+)-depletion condition (1 mM CaCl(2)). Our data identify with the carbonic anhydrase and the OSTF the first two molecules which remain conserved in cells, potentially involved in Ca-based skeletal dissolution, from sponges (sclerocytes) to human (osteoclast).

Silicateins, silicatein interactors and cellular interplay in sponge skeletogenesis: formation of glass fiber-like spicules.

Biomineralization processes are characterized by controlled deposition of inorganic polymers/minerals mediated by functional groups linked to organic templates. One metazoan taxon, the siliceous sponges, has utilized these principles and even gained the ability to form these polymers/minerals by an enzymatic mechanism using silicateins. Silicateins are the dominant protein species present in the axial canal of the skeletal elements of the siliceous sponges, the spicules, where they form the axial filament. Silicateins also represent a major part of the organic components of the silica lamellae, which are cylindrically arranged around the axial canal. With the demosponge Suberites domuncula as a model, quantitative enzymatic studies revealed that both the native and the recombinant enzyme display in vitro the same biosilica-forming activity as the enzyme involved in spicule formation in vivo. Monomeric silicatein molecules assemble into filaments via fractal intermediates, which are stabilized by the silicatein-interacting protein silintaphin-1. Besides the silicateins, a silica-degrading enzyme silicase acting as a catabolic enzyme has been identified. Growth of spicules proceeds in vivo in two directions: first, by axial growth, a process that is controlled by evagination of cell protrusions and mediated by the axial filament-associated silicateins; and second, by appositional growth, which is driven by the extraspicular silicateins, a process that provides the spicules with their final size and morphology. This radial layer-by-layer accretion is directed by organic cylinders that are formed around the growing spicule and consist of galectin and silicatein. The cellular interplay that controls the morphogenetic processes during spiculogenesis is outlined.