Three-tiered approach for standard information requirements for polymers requiring registration under REACH.

Polymers are a very large class of chemicals comprising often complex molecules with multiple functions used in everyday products. The EU Commission is seeking to develop environmental and human health standard information requirements (SIRs) for man-made polymers requiring registration (PRR) under a revised Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Regulation. Conventional risk assessment approaches currently used for small molecules may not apply to most polymers. Therefore, we propose a conceptual three-tiered regulatory approach for data generation to assess individual and groups of polymers requiring registration (PRR). A key element is the grouping of polymers according to chemistry, physico-chemical properties and hazard similarity. The limited bioavailability of many polymers is a prominent difference to many small molecules and is a key consideration of the proposed approach. Methods assessing potential for systemic bioavailability are integral to Tier 1. Decisions for further studies are based on considerations of properties and effects, combined with systemic bioavailability and use and exposure considerations. For many PRRs, Tier 1 data on hazard, use and exposure will likely be sufficient for achieving the protection goals of REACH. Vertebrate animal studies in Tiers 2 and 3 can be limited to targeted testing. The outlined approach aims to make use of current best scientific evidence and to reduce animal testing whilst providing data for an adequate level of protection.

Assessment of the contribution of surfactants to mixture toxicity in French surface waters.

Surfactants are widely used 'down-the-drain' chemicals with the potential to occur at high concentrations in local water bodies and to be part of unintentional environmental mixtures. Recently, increased regulatory focus has been placed on the impacts of complex mixtures in aquatic environments and the substances that are likely to drive mixture risk. This study assessed the contribution of surfactants to the total mixture pressure in freshwater ecosystems. Environmental concentrations, collated from existing French monitoring data, were combined with estimated ecotoxicological thresholds to calculate hazard quotients (HQ) for each substance, and hazard indices (HI) for each mixture. Two scenarios were investigated to correct for concentrations below the limit of quantification (LOQ) in the dataset. The first (best-case) scenario assumed all values

Toward harmonizing ecotoxicity characterization in life cycle impact assessment.

Ecosystem quality is an important area of protection in life cycle impact assessment (LCIA). Chemical pollution has adverse impacts on ecosystems on a global scale. To improve methods for assessing ecosystem impacts, the Life Cycle Initiative hosted by the United Nations Environment Programme established a task force to evaluate the state-of-the-science in modeling chemical exposure of organisms and the resulting ecotoxicological effects for use in LCIA. The outcome of the task force work will be global guidance and harmonization by recommending changes to the existing practice of exposure and effect modeling in ecotoxicity characterization. These changes will reflect the current science and ensure the stability of recommended practice. Recommendations must work within the needs of LCIA in terms of 1) operating on information from any inventory reporting chemical emissions with limited spatiotemporal information, 2) applying best estimates rather than conservative assumptions to ensure unbiased comparison with results for other impact categories, and 3) yielding results that are additive across substances and life cycle stages and that will allow a quantitative expression of damage to the exposed ecosystem. We describe the current framework and discuss research questions identified in a roadmap. Primary research questions relate to the approach toward ecotoxicological effect assessment, the need to clarify the method's scope and interpretation of its results, the need to consider additional environmental compartments and impact pathways, and the relevance of effect metrics other than the currently applied geometric mean of toxicity effect data across species. Because they often dominate ecotoxicity results in LCIA, we give metals a special focus, including consideration of their possible essentiality and changes in environmental bioavailability. We conclude with a summary of key questions along with preliminary recommendations to address them as well as open questions that require additional research efforts. Environ Toxicol Chem 2018;37:2955-2971. © 2018 SETAC.

Comprehensive review of several surfactants in marine environments: Fate and ecotoxicity.

Surfactants are a commercially important group of chemicals widely used on a global scale. Despite high removal efficiencies during wastewater treatment, their high consumption volumes mean that a certain fraction will always enter aquatic ecosystems, with marine environments being the ultimate sites of deposition. Consequently, surfactants have been detected within marine waters and sediments. However, aquatic environmental studies have mostly focused on the freshwater environment, and marine studies are considerably underrepresented by comparison. The present review aims to provide a summary of current marine environmental fate (monitoring, biodegradation, and bioconcentration) and effects data of 5 key surfactant groups: linear alkylbenzene sulfonates, alcohol ethoxysulfates, alkyl sulfates, alcohol ethoxylates, and ditallow dimethyl ammonium chloride. Monitoring data are currently limited, especially for alcohol ethoxysulfates and alkyl sulfates. Biodegradation was shown to be considerably slower under marine conditions, whereas ecotoxicity studies suggest that marine species are approximately equally as sensitive to these surfactants as freshwater species. Marine bioconcentration studies are almost nonexistent. Current gaps within the literature are presented, thereby highlighting research areas where additional marine studies should focus.

A compilation of life cycle studies for six household detergent product categories in Europe: the basis for product-specific A.I.S.E. Charter Advanced Sustainability Profiles.

BACKGROUND: A.I.S.E., the International Association for Soaps, Detergents and Maintenance Products, launched the 'A.I.S.E. Charter for Sustainable Cleaning' in Europe in 2005 to promote sustainability in the cleaning and maintenance products industry. This Charter is a proactive programme for translating the concept of sustainable innovation into reality and actions. Per product category, life cycle assessments (LCA) are used to set sustainability criteria that are ambitious, but also achievable by all market players. RESULTS: This paper presents and discusses LCAs of six household detergent product categories conducted for the Charter, i.e.: manual dishwashing detergents, powder and tablet laundry detergents, window glass trigger spray cleaners, bathroom trigger spray cleaners, acid toilet cleaners, and bleach toilet cleaners. Relevant impact categories are identified, as well as the life cycle stages with the largest contribution to the environmental impact. CONCLUSIONS: It was concluded that the variables that mainly drive the results (i.e. the environmental hotspots) for manual dishwashing detergents and laundry detergents were the water temperature, water consumption (for manual dishwashing detergents), product dosage (for laundry detergents), and the choice and amount of surfactant. By contrast, for bathroom trigger sprays, acid and bleach toilet cleaners, the driving factors were plastic packaging, transportation to retailer, and specific ingredients. Additionally, the type of surfactant was important for bleach toilet cleaners. For window glass trigger sprays, the driving factors were the plastic packaging and the type of surfactant, and the other ingredients were of less importance. A.I.S.E. used the results of the studies to establish sustainability criteria, the so-called 'Charter Advanced Sustainability Profiles', which led to improvements in the marketplace.

Probabilistic risk assessment for linear alkylbenzene sulfonate (LAS) in sewage sludge used on agricultural soil.

Deterministic and probabilistic risk assessments were developed for commercial LAS in agricultural soil amended with sewage sludge. The procedure done according to ILSI Europe's Conceptual Framework [Schowanek, D., Carr, R., David, H., Douben, P., Hall, J., Kirchmann, H., Patria, L., Sequi, P., Smith, S., Webb, S.F., 2004. A risk-based methodology for deriving quality standards for organic contaminants in sewage sludge for use in agriculture-conceptual Framework. Regul. Toxicol. Pharmacol. 40 (3), 227-251], consists of three main steps. First, the most sensitive endpoint was determined. This was found to be the chronic ecotoxicity of LAS to soil invertebrates and plants. Additional endpoints, such as potential for plant uptake and transfer in the food chain, leaching to groundwater, surface erosion run-off, human health risk via drinking water, plant consumption and soil ingestion were also systematically evaluated but were all assessed to be of little toxicological significance. In the second step, a back-calculation was conducted from the Predicted No-Effect Concentration in soil (PNECsoil) to a safe level of LAS in sludge (here called 'Sludge Quality Standard'; SQS). The deterministic approach followed the default agricultural soil exposure scenario in the EU-Technical Guidance Document (TGD). The SQS for LAS was calculated as 49 g/kg sludge Dry Matter (DM). In order to assess the potential variability as a result of varying agricultural practices and local environmental conditions, two probabilistic exposure assessment scenarios were also developed. The mean SQS was estimated at 55 and 27.5 g/kg DM for the homogeneous soil mixing and soil injection scenarios, respectively. In the final step, the resulting SQS values were evaluated for consistency and relevance versus available information from agricultural experience and field tests. No build-up, adverse impact on soil fertility, agronomic performance, or animal/human health have been reported for agricultural fields which have received sludge with high LAS levels for up to 30 years. Distribution statistics of LAS concentrations in anaerobically digested sewage sludge measured across Europe were created (mean value: 5.56 g LAS/kg sludge DM). When compared to the above mean SQS values, adequate risk characterisation ratios of 0.08-0.2 were found. The 'ecological risk' parameter calculated for anaerobic sludge from the probabilistic approaches was below 3%. A regulatory Limit Value for LAS of 2.60 g/kg sludge DM was originally proposed in the 3rd Draft of the Working Document on Sludge [CEC, 2000b. Working Document on Sludge. Third Draft, Brussels 27 April 2000, DG. Environment, 18 p.]. The current assessment, based on an updated dataset and a refined assessment procedure, suggests that the need for a limit value for LAS in sewage sludge cannot be substantiated on a risk basis.

Exposure simulation for pharmaceuticals in European surface waters with GREAT-ER.

The Geo-referenced Regional Exposure Assessment Tool for European Rivers (GREAT-ER) model was developed as an aquatic chemical exposure prediction tool for use within environmental risk assessment (ERA) schemes and river basin management. The GREAT-ER software calculates the distribution of predicted environmental concentrations (PECs) of consumer chemicals in surface waters, for individual river stretches, as well as representative average PECs for entire catchments. The system uses an ARC/INFO-ArcView (ESRI) based Geographical Information System (GIS) for data storage and visualization, combined with simple mathematical models for prediction of chemical fate. Use of GREAT-ER 1.03 to derive PECs is illustrated for Ethinyl Oestradiol, Paracetamol, Aspirin, Dextropropoxyphene, Clofibrate and Oxytetracycline in three river basins, i.e. Aire (UK), Lambro (Italy) and Rur (Germany). In contrast with household consumer chemicals the transformation of pharmaceuticals in the human body needs to be incorporated in the emission estimation. The "PECinitial" of these pharmaceuticals in surface waters ranges from >1 microg/l (Oxytetracycline and Paracetamol) down to <1 ng/l (Ethinyl Oestradiol). Risk characterization employing PECs or measured environmental concentrations (MECs) and predicted-no-effect-concentrations (PNECs) from available ecotoxicity data is also reported.