Validation of reliable reference genes for qPCR of CD4+ T cells exposed to compressive strain.

For accurate interpretation of quantitative real-time PCR (qPCR) data, stable reference genes are essential for normalization of target genes. To date, there is no information on reliable housekeeping genes in CD4+ T cells in a three-dimensional (3D) matrix under pressure stimulation. This in vitro study describes for the first time a method for pressure stimulation of CD4+ T cells in a 3D matrix in the context of orthodontic tooth movement (OTM) and identifies a set of reliable reference genes. CD4+ T cells were isolated from murine spleen and activated with anti-CD3/-CD28 Dynabeads (Thermo Fisher, Langenselbold, Germany) on standard cell culture plates or in 3D scaffolds with or without compressive strain. Expression stability of nine potential reference genes was examined using four mathematical algorithms. Gene expression of Il2 was normalized to all potential reference genes to highlight the importance of correct normalization. Cell proliferation and the expression of the surface markers CD25 and CD69 were also determined. The 3D matrix did not inhibit proliferation after immunological activation of T cells and embedded the cells sufficiently to expose them to pressure load. Expression of ubiquitin C (Ubc) and hypoxanthine phosphoribosyltransferase (Hprt) was the most stable under all conditions tested. A combination of these two genes was suitable for normalization of qPCR data. Normalization of Il2 gene expression showed highly variable results depending on the reference gene used. Pressure reduced cell proliferation and the number of CD69-positive T cells. This study provides a basis for performing valid and reliable qPCR experiments with CD4+ T cells cultured in 3D scaffolds and exposed to compressive forces simulating OTM.

Chiroptical Second-Harmonic Tyndall Scattering from Silicon Nanohelices.

Chirality is omnipresent in the living world. As biomimetic nanotechnology and self-assembly advance, they too need chirality. Accordingly, there is a pressing need to develop general methods to characterize chiral building blocks at the nanoscale in liquids such as water─the medium of life. Here, we demonstrate the chiroptical second-harmonic Tyndall scattering effect. The effect was observed in Si nanohelices, an example of a high-refractive-index dielectric nanomaterial. For three wavelengths of illumination, we observe a clear difference in the second-harmonic scattered light that depends on the chirality of the nanohelices and the handedness of circularly polarized light. Importantly, we provide a theoretical analysis that explains the origin of the effect and its direction dependence, resulting from different specific contributions of "electric dipole-magnetic dipole" and "electric dipole-electric quadrupole" coupling tensors. Using numerical simulations, we narrow down the number of such terms to 8 in forward scattering and to a single one in right-angled scattering. For chiral scatterers such as high-refractive-index dielectric nanoparticles, our findings expand the Tyndall scattering regime to nonlinear optics. Moreover, our theory can be broadened and adapted to further classes where such scattering has already been observed or is yet to be observed.

Frequency and variability of nonmetric dental crown traits of primary and permanent molars in a group of orthodontic patients.

BACKGROUND: The present study aimed to assess the frequency and variation of 13 nonmetric dental crown traits (NDCT) in permanent and primary molars in German orthodontic patients. METHODS: Dental records from orthodontic patients were screened and evaluated. First and second permanent and primary upper and lower molars (from left and right sides) were assessed. Teeth with cavitated dental caries, occlusal wear, restorations and obvious dental deformities were not evaluated. The NDCT for permanent molars were identified and scored according to the odontoscopic system developed by Arizona State University Dental Anthropology System (ASUDAS). The NDCT for primary molars were identified and scored according to ASUDAS, Hanihara's method and Sciulli's method. The χ2 test was used to investigate side preference and sexual dimorphism at a significance level of p ≤ 0.050. RESULTS: A total of 163 orthodontic patients (82 males and 81 females) aged 8-14 years were included. A sexual dimorphism was observed for the hypocone in first upper permanent molar (p = 0.041). The protostylid was observed in lower permanent molars (range 2.1-10%). Males presented more hypoconulid than females (p = 0.019). Only females presented the distal trigonid crest in lower first permanent molars (p = 0.002). The most common groove pattern in primary molars was Y; male presented more Y grade than females in the lower second primary molar (p = 0.039). Asymmetry was observed in some traits, ranging from 0 to 100%. CONCLUSION: The present study showed the frequency of NDCT of molars in German orthodontic patients and demonstrated that some traits present sexual dimorphism.

Controlling the broadband enhanced light chirality with L-shaped dielectric metamaterials.

The inherently weak chiroptical responses of natural materials limit their usage for controlling and enhancing chiral light-matter interactions. Recently, several nanostructures with subwavelength scale dimensions were demonstrated, mainly due to the advent of nanofabrication technologies, as a potential alternative to efficiently enhance chirality. However, the intrinsic lossy nature of metals and the inherent narrowband response of dielectric planar thin films or metasurface structures pose severe limitations toward the practical realization of broadband and tailorable chiral systems. Here, we tackle these problems by designing all-dielectric silicon-based L-shaped optical metamaterials based on tilted nanopillars that exhibit broadband and enhanced chiroptical response in transmission operation. We use an emerging bottom-up fabrication approach, named glancing angle deposition, to assemble these dielectric metamaterials on a wafer scale. The reported strong chirality and optical anisotropic properties are controllable in terms of both amplitude and operating frequency by simply varying the shape and dimensions of the nanopillars. The presented nanostructures can be used in a plethora of emerging nanophotonic applications, such as chiral sensors, polarization filters, and spin-locked nanowaveguides.

Clinical implications of a mathematical-geometrical model to predict changes in the anterior arch dimension.

PURPOSE: Anterior arch length (AL) and the alterations in its dimension following incisor movements were shown to be predictable for an individual patient using a mathematical-geometrical model based on a third-degree parabola. Although the model has been validated previously, it is hard to apply in daily orthodontic routine. Thus, the aim of this study was to modify the model using different approaches to allow its establishment in daily routine. METHODS: This retrospective study was based on a study collective, which was described previously and consisted of 50 randomly chosen dental casts and lateral cephalograms taken before (T0) and after (T1) orthodontic treatment with fixed appliances. A JAVA computer program (Oracle, Austin, TX, USA) was developed to predict AL changes following therapeutic changes of arch width, depth or incisor inclination/position, taking the type of tooth movement into account. Performing exemplary AL calculations with the computer program, general rules and nomograms were set up, followed by multiple linear regression analyses to establish easy-to-use regression equations. RESULTS: The JAVA computer program is available for download. Sagittal changes showed more effect on AL than transverse modifications. Protruding incisors increased AL, but also reduced overbite. The extent of alteration in AL depended on the initial depth, width, incisor inclination, tooth movement type and distance between the incisal edge and the centre of rotation. CONCLUSIONS: The computer program precisely predicts individual changes in AL but is time-consuming. The presented regression equations and nomograms, considering metric variables, are easier to apply clinically and the differences compared to the AL calculated by the computer program are negligible.

Randomized controlled clinical trial on the efficacy of a novel antimicrobial chewing gum in reducing plaque and gingivitis in adolescent orthodontic patients.

OBJECTIVES: Chewing gums containing antiseptics or other antimicrobial substances may be effective in reducing plaque and gingivitis. Therefore, the aim of this randomized placebo-controlled clinical trial was to investigate the efficacy of a novel antimicrobial chewing gum containing essential oils (cinnamon, lemon, peppermint) and extracts on reduction of dental plaque and gingivitis as well as on oral health-related quality of life (OHRQoL) in adolescent orthodontic patients. MATERIALS: 52 patients (11-22 years of age) were randomly assigned to use a test chewing gum (COVIDGUM, Clevergum) or a commercially available control chewing gum over a period of 10 days. Approximal plaque index (API), papillary bleeding index (PBI) and an OHRQoL questionnaire for children (COHIP-G19) were assessed at baseline (BL), after 10 days (10d) and 30 days (30d). In addition, oral health and oral hygiene related questions of the COHIP-G19 questionnaire were evaluated separately in subscales at each timepoint. Data were analyzed using non-parametrical statistical procedures (α = 0.05). RESULTS: API and PBI decreased significantly over time from BL to 10d and from BL to 30d in both groups, without significant differences between the groups. In both groups, the COHIP-G19 score, oral health subscale and oral hygiene subscale decreased significantly over time. Regarding the oral hygiene subscale, the test group showed significantly better scores at 30d (p = 0.011). CONCLUSION: Both chewing gums performed similarly effective in terms of reducing plaque accumulation and gingival inflammation and improving OHRQoL. CLINICAL RELEVANCE: Chewing gums without antimicrobial ingredients may be sufficient to decrease plaque accumulation and gingival inflammation.

Calcification patterns and morphology of Sella turcica are related to anteroposterior skeletal malocclusions: A cross-sectional study.

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

New insights into the genetics of mandibular retrognathism: novel candidate genes.

PURPOSE: Mandibular retrognathism (MR) is a common skeletal malocclusion in humans with a strong genetic component. Single nucleotide polymorphisms (SNPs) in genes encoding epidermal growth factor (EGF) and EGF receptor (EGFR) could be involved in the etiology of mandibular retrognathism. Therefore, in this study, we investigated whether SNPs in the genes encoding for EGF and EGFR are associated with MR in German teenagers. METHODS: This nested case-control study evaluated German orthodontic patients, aged 10-18 years. DNA, which was isolated from buccal epithelial cells using two cytobrushes, was used for genotyping analysis and digital pretreatment lateral cephalograms were examined to calculate SNB and ANB. Patients with a retrognathic mandible (SNB < 78°) were included as cases, while patients with an orthognathic mandible (SNB = 78-82°) were included as controls. Four SNPs in the genes encoding for EGF and EGFR were chosen and genotyped using real-time PCR. Allele, genotype, and haplotype frequency were compared across groups (α = 5%). RESULTS: Finally, 119 patients were included in this study (45 orthognathic mandible, 74 retrognathic mandible). The minor allele G in rs4444903 (EGF) was statistically more frequent in individuals with an orthognathic mandible (p = 0.008). The haplotype formed by the mutant alleles for rs4444903|rs2237051 (EGF; G|A) was statistically more frequent in the orthognathic mandible group (p = 0.007). The SNPs rs4444903 and rs2237051 in EGF, and rs2227983 in EGFR were statistically associated with a decreasing risk of developing a retrognathic mandible according to univariate and multivariate statistical analysis (p < 0.05). CONCLUSION: SNPs in EGF (rs4444903 and rs2237051) and EGFR (rs2227983) were associated with MR in our German sample and could be genetic biomarkers for early and individualized diagnostic identification of retrognathic mandibular development by means of genetic screening tests.