Biochemical characterization and crystal structures of a fungal family 3 ß-glucosidase, Cel3A from Hypocrea jecorina.

Cellulase mixtures from Hypocrea jecorina are commonly used for the saccharification of cellulose in biotechnical applications. The most abundant ß-glucosidase in the mesophilic fungus Hypocrea jecorina is HjCel3A, which hydrolyzes the ß-linkage between two adjacent molecules in dimers and short oligomers of glucose. It has been shown that enhanced levels of HjCel3A in H. jecorina cellulase mixtures benefit the conversion of cellulose to glucose. Biochemical characterization of HjCel3A shows that the enzyme efficiently hydrolyzes (1,4)- as well as (1,2)-, (1,3)-, and (1,6)-ß-D-linked disaccharides. For crystallization studies, HjCel3A was produced in both H. jecorina (HjCel3A) and Pichia pastoris (Pp-HjCel3A). Whereas the thermostabilities of HjCel3A and Pp-HjCel3A are the same, Pp-HjCel3A has a higher degree of N-linked glycosylation. Here, we present x-ray structures of HjCel3A with and without glucose bound in the active site. The structures have a three-domain architecture as observed previously for other glycoside hydrolase family 3 ß-glucosidases. Both production hosts resulted in HjCel3A structures that have N-linked glycosylations at Asn(208) and Asn(310). In H. jecorina-produced HjCel3A, a single N-acetylglucosamine is present at both sites, whereas in Pp-HjCel3A, the P. pastoris-produced HjCel3A enzyme, the glycan chains consist of 8 or 4 saccharides. The glycosylations are involved in intermolecular contacts in the structures derived from either host. Due to the different sizes of the glycosylations, the interactions result in different crystal forms for the two protein forms.

α-Fucosidases with different substrate specificities from two species of Fusarium.

Two fungal-secreted α-fucosidases and their genes were characterized. FoFCO1 was purified from culture filtrates of Fusarium oxysporum strain 0685 grown on L-fucose and its encoding gene identified in the sequenced genome of strain 4287. FoFCO1 was active on p-nitrophenyl-α-fucoside (pNP-Fuc), but did not defucosylate a nonasaccharide (XXFG) fragment of pea xyloglucan. A putative α-fucosidase gene (FgFCO1) from Fusarium graminearum was expressed in Pichia pastoris. FgFCO1 was ~1,800 times less active on pNP-Fuc than FoFCO1, but was able to defucosylate the XXFG nonasaccharide. Although FgFCO1 and FoFCO1 both belong to Glycosyl Hydrolase family 29, they share <25 % overall amino acid identity. Alignment of all available fungal orthologs of FoFCO1 and FgFCO1 indicated that these two proteins belong to two subfamilies of fungal GH29 α-fucosidases. Fungal orthologs of subfamily 1 (to which FoFCO1 belongs) are taxonomically more widely distributed than subfamily 2 (FgFCO1), but neither was universally present in the sequenced fungal genomes. Trichoderma reesei and most species of Aspergillus lack genes for either GH29 subfamily.

Ribosomal biosynthesis of α-amanitin in Galerina marginata.

Amatoxins, including α-amanitin, are bicyclic octapeptides found in mushrooms (Agaricomycetes, Agaricales) of certain species in the genera Amanita, Galerina, Lepiota, and Conocybe. Amatoxins and the chemically similar phallotoxins are synthesized on ribosomes in Amanita bisporigera, Amanita phalloides, and Amanita ocreata. In order to determine if amatoxins are synthesized by a similar mechanism in another, distantly related mushroom, we obtained genome survey sequence data from a monokaryotic isolate of Galerinamarginata, which produces α-amanitin. The genome of G. marginata contains two copies of the α-amanitin gene (GmAMA1-1 and GmAMA1-2). The α-amanitin proprotein sequences of G. marginata (35 amino acids) are highly divergent from AMA1 of A. bisporigera except for the toxin region itself (IWGIGCNP in single-letter amino acid code) and the amino acids immediately upstream (N[A/S]TRLP). G. marginata does not contain any related toxin-encoding sequences besides GmAMA1-1 and GmAMA1-2. DNA from two other α-amanitin-producing isolates of Galerina (G. badipes and G. venenata) hybridized to GmAMA1, whereas DNA from the toxin non-producing species Galerinahybrida did not. Expression of the GmAMA1 genes was induced by growth on low carbon. RNASeq evidence indicates that both copies of GmAMA1 are expressed approximately equally. A prolyl oligopeptidase (POP) is strongly implicated in processing of the cyclic peptide toxins of A. bisporigera and Conocybe apala. G. marginata has two predicted POP genes; one, like AbPOPB of A. bisporigera, is present only in the toxin-producing isolates of Galerina and the other, like AbPOPA of A. bisporigera, is present in all species. Our results indicate that G.marginata biosynthesizes amatoxins on ribosomes by a pathway similar to Amanita species, involving a genetically encoded proprotein of 35 amino acids that is post-translationally processed by a POP. However, due to the high degree of divergence, the evolutionary relationship between AMA1 in the genera Amanita and Galerina is unclear.

Biochemical and molecular characterization of secreted α-xylosidase from Aspergillus niger.

α-Linked xylose is a major component of xyloglucans in the cell walls of higher plants. An α-xylosidase (AxlA) was purified from a commercial enzyme preparation from Aspergillus niger, and the encoding gene was identified. The protein is a member of glycosyl hydrolase family 31. It was active on p-nitrophenyl-α-d-xyloside, isoprimeverose, xyloglucan heptasaccharide (XXXG), and tamarind xyloglucan. When expressed in Pichia pastoris, AxlA had activity comparable to the native enzyme on pNPαX and IP despite apparent hyperglycosylation. The pH optimum of AxlA was between 3.0 and 4.0. AxlA together with ß-glucosidase depolymerized xyloglucan heptasaccharide. A combination of AxlA, ß-glucosidase, xyloglucanase, and ß-galactosidase in the optimal proportions of 51:5:19:25 or 59:5:11:25 could completely depolymerize tamarind XG to free Glc or Xyl, respectively. To the best of our knowledge, this is the first characterization of a secreted microbial α-xylosidase. Secreted α-xylosidases appear to be rare in nature, being absent from other tested commercial enzyme mixtures and from the genomes of most filamentous fungi.

Alkaline peroxide pretreatment of corn stover: effects of biomass, peroxide, and enzyme loading and composition on yields of glucose and xylose.

BACKGROUND: Pretreatment is a critical step in the conversion of lignocellulose to fermentable sugars. Although many pretreatment processes are currently under investigation, none of them are entirely satisfactory in regard to effectiveness, cost, or environmental impact. The use of hydrogen peroxide at pH 11.5 (alkaline hydrogen peroxide (AHP)) was shown by Gould and coworkers to be an effective pretreatment of grass stovers and other plant materials in the context of animal nutrition and ethanol production. Our earlier experiments indicated that AHP performed well when compared against two other alkaline pretreatments. Here, we explored several key parameters to test the potential of AHP for further improvement relevant to lignocellulosic ethanol production. RESULTS: The effects of biomass loading, hydrogen peroxide loading, residence time, and pH control were tested in combination with subsequent digestion with a commercial enzyme preparation, optimized mixtures of four commercial enzymes, or optimized synthetic mixtures of pure enzymes. AHP pretreatment was performed at room temperature (23°C) and atmospheric pressure, and after AHP pretreatment the biomass was neutralized with HCl but not washed before enzyme digestion. Standard enzyme digestion conditions were 0.2% glucan loading, 15 mg protein/g glucan, and 48 h digestion at 50°C. Higher pretreatment biomass loadings (10% to 20%) gave higher monomeric glucose (Glc) and xylose (Xyl) yields than the 2% loading used in earlier studies. An H2O2 loading of 0.25 g/g biomass was almost as effective as 0.5 g/g, but 0.125 g/g was significantly less effective. Optimized mixtures of four commercial enzymes substantially increased post-AHP-pretreatment enzymatic hydrolysis yields at all H2O2 concentrations compared to any single commercial enzyme. At a pretreatment biomass loading of 10% and an H2O2 loading of 0.5 g/g biomass, an optimized commercial mixture at total protein loadings of 8 or 15 mg/g glucan gave monomeric Glc yields of 83% or 95%, respectively. Yields of Glc and Xyl after pretreatment at a low hydrogen peroxide loading (0.125 g H2O2/g biomass) could be improved by extending the pretreatment residence time to 48 h and readjusting the pH to 11.5 every 6 h during the pretreatment. A Glc yield of 77% was obtained using a pretreatment of 15% biomass loading, 0.125 g H2O2/g biomass, and 48 h with pH adjustment, followed by digestion with an optimized commercial enzyme mixture at an enzyme loading of 15 mg protein/g glucan. CONCLUSIONS: Alkaline peroxide is an effective pretreatment for corn stover. Particular advantages are the use of reagents with low environmental impact and avoidance of special reaction chambers. Reasonable yields of monomeric Glc can be obtained at an H2O2 concentration one-quarter of that used in previous AHP research. Additional improvements in the AHP process, such as peroxide stabilization, peroxide recycling, and improved pH control, could lead to further improvements in AHP pretreatment.

Rapid optimization of enzyme mixtures for deconstruction of diverse pretreatment/biomass feedstock combinations.

BACKGROUND: Enzymes for plant cell wall deconstruction are a major cost in the production of ethanol from lignocellulosic biomass. The goal of this research was to develop optimized synthetic mixtures of enzymes for multiple pretreatment/substrate combinations using our high-throughput biomass digestion platform, GENPLAT, which combines robotic liquid handling, statistical experimental design and automated Glc and Xyl assays. Proportions of six core fungal enzymes (CBH1, CBH2, EG1, ß-glucosidase, a GH10 endo-ß1,4-xylanase, and ß-xylosidase) were optimized at a fixed enzyme loading of 15 mg/g glucan for release of Glc and Xyl from all combinations of five biomass feedstocks (corn stover, switchgrass, Miscanthus, dried distillers' grains plus solubles [DDGS] and poplar) subjected to three alkaline pretreatments (AFEX, dilute base [0.25% NaOH] and alkaline peroxide [AP]). A 16-component mixture comprising the core set plus 10 accessory enzymes was optimized for three pretreatment/substrate combinations. Results were compared to the performance of two commercial enzymes (Accellerase 1000 and Spezyme CP) at the same protein loadings. RESULTS: When analyzed with GENPLAT, corn stover gave the highest yields of Glc with commercial enzymes and with the core set with all pretreatments, whereas corn stover, switchgrass and Miscanthus gave comparable Xyl yields. With commercial enzymes and with the core set, yields of Glc and Xyl were highest for grass stovers pretreated by AP compared to AFEX or dilute base. Corn stover, switchgrass and DDGS pretreated with AFEX and digested with the core set required a higher proportion of endo-ß1,4-xylanase (EX3) and a lower proportion of endo-ß1,4-glucanase (EG1) compared to the same materials pretreated with dilute base or AP. An optimized enzyme mixture containing 16 components (by addition of α-glucuronidase, a GH11 endoxylanase [EX2], Cel5A, Cel61A, Cip1, Cip2, ß-mannanase, amyloglucosidase, α-arabinosidase, and Cel12A to the core set) was determined for AFEX-pretreated corn stover, DDGS, and AP-pretreated corn stover. The optimized mixture for AP-corn stover contained more exo-ß1,4-glucanase (i.e., the sum of CBH1 + CBH2) and less endo-ß1,4-glucanase (EG1 + Cel5A) than the optimal mixture for AFEX-corn stover. Amyloglucosidase and ß-mannanase were the two most important enzymes for release of Glc from DDGS but were not required (i.e., 0% optimum) for corn stover subjected to AP or AFEX. As a function of enzyme loading over the range 0 to 30 mg/g glucan, Glc release from AP-corn stover reached a plateau of 60-70% Glc yield at a lower enzyme loading (5-10 mg/g glucan) than AFEX-corn stover. Accellerase 1000 was superior to Spezyme CP, the core set or the 16-component mixture for Glc yield at 12 h, but the 16-component set was as effective as the commercial enzyme mixtures at 48 h. CONCLUSION: The results in this paper demonstrate that GENPLAT can be used to rapidly produce enzyme cocktails for specific pretreatment/biomass combinations. Pretreatment conditions and feedstock source both influence the Glc and Xyl yields as well as optimal enzyme proportions. It is predicted that it will be possible to improve synthetic enzyme mixtures further by the addition of additional accessory enzymes.

Colocalization of amanitin and a candidate toxin-processing prolyl oligopeptidase in Amanita basidiocarps.

Fungi in the basidiomycetous genus Amanita owe their high mammalian toxicity to the bicyclic octapeptide amatoxins such as α-amanitin. Amatoxins and the related phallotoxins (such as the heptapeptide phalloidin) are encoded by members of the "MSDIN" gene family and are synthesized on ribosomes as short (34- to 35-amino-acid) proproteins. Antiamanitin antibodies and confocal microscopy were used to determine the cellular and subcellular localizations of amanitin accumulation in basidiocarps (mushrooms) of the Eastern North American destroying angel (Amanita bisporigera). Consistent with previous studies, amanitin is present throughout the basidiocarp (stipe, pileus, lamellae, trama, and universal veil), but it is present in only a subset of cells within these tissues. Restriction of amanitin to certain cells is especially marked in the hymenium. Several lines of evidence implicate a specific prolyl oligopeptidase, A. bisporigera POPB (AbPOPB), in the initial processing of the amanitin and phallotoxin proproteins. The gene for AbPOPB is restricted taxonomically to the amatoxin-producing species of Amanita and is clustered in the genome with at least one expressed member of the MSDIN gene family. Immunologically, amanitin and AbPOPB show a high degree of colocalization, indicating that toxin biosynthesis and accumulation occur in the same cells and possibly in the same subcellular compartments.

Synthetic multi-component enzyme mixtures for deconstruction of lignocellulosic biomass.

A high throughput enzyme assay platform, called GENPLAT, was used to guide the development of an optimized mixture of individual purified enzymes from ten "accessory" and six "core" enzymes. Enzyme mixtures were optimized for release of Glu, Xyl, or a combination of the two from corn stover pretreated by ammonia-fiber expansion (AFEX). Assay conditions were a fixed enzyme loading of 15 mg/g glucan, 48 h digestion, and 50 degrees C. Five of the ten tested accessory proteins enhanced Glu or Xyl yield compared to the core set alone, and five did not. An 11-component mixture containing the core set and five accessory enzymes optimized for Glu released 52.1% of the available Glu, compared to 38.5% with the core set alone. A mixture optimized for Xyl released 39.9% of the Xyl, compared to 26.4% with the core set alone. We predict that there is still considerable opportunity for further improvement of synthetic mixtures. Furthermore, the strategy described here is applicable to the development of more efficient enzyme cocktails for any pretreatment/biomass combination and for detecting enzymes that make a heretofore unrecognized contribution to lignocellulose deconstruction.

Synthetic enzyme mixtures for biomass deconstruction: production and optimization of a core set.

The high cost of enzymes is a major bottleneck preventing the development of an economically viable lignocellulosic ethanol industry. Commercial enzyme cocktails for the conversion of plant biomass to fermentable sugars are complex mixtures containing more than 80 proteins of suboptimal activities and relative proportions. As a step toward the development of a more efficient enzyme cocktail for biomass conversion, we have developed a platform, called GENPLAT, that uses robotic liquid handling and statistically valid experimental design to analyze synthetic enzyme mixtures. Commercial enzymes (Accellerase 1000 +/- Multifect Xylanase, and Spezyme CP +/- Novozyme 188) were used to test the system and serve as comparative benchmarks. Using ammonia-fiber expansion (AFEX) pretreated corn stover ground to 0.5 mm and a glucan loading of 0.2%, an enzyme loading of 15 mg protein/g glucan, and 48 h digestion at 50 degrees C, commercial enzymes released 53% and 41% of the available glucose and xylose, respectively. Mixtures of three, five, and six pure enzymes of Trichoderma species, expressed in Pichia pastoris, were systematically optimized. Statistical models were developed for the optimization of glucose alone, xylose alone, and the average of glucose + xylose for two digestion durations, 24 and 48 h. The resulting models were statistically significant (P < 0.0001) and indicated an optimum composition for glucose release (values for optimized xylose release are in parentheses) of 29% (5%) cellobiohydrolase 1, 5% (14%) cellobiohydrolase 2, 25% (25%) endo-beta1,4-glucanase 1, 14% (5%) beta-glucosidase, 22% (34%) endo-beta1,4-xylanase 3, and 5% (17%) beta-xylosidase in 48 h at a protein loading of 15 mg/g glucan. Comparison of two AFEX-treated corn stover preparations ground to different particle sizes indicated that particle size (100 vs. 500 microm) makes a large difference in total digestibility. The assay platform and the optimized "core" set together provide a starting point for the rapid testing and optimization of alternate core enzymes from other microbial and recombinant sources as well as for the testing of "accessory" proteins for development of superior enzyme mixtures for biomass conversion.

Gene family encoding the major toxins of lethal Amanita mushrooms.

Amatoxins, the lethal constituents of poisonous mushrooms in the genus Amanita, are bicyclic octapeptides. Two genes in A. bisporigera, AMA1 and PHA1, directly encode alpha-amanitin, an amatoxin, and the related bicyclic heptapeptide phallacidin, a phallotoxin, indicating that these compounds are synthesized on ribosomes and not by nonribosomal peptide synthetases. alpha-Amanitin and phallacidin are synthesized as proproteins of 35 and 34 amino acids, respectively, from which they are predicted to be cleaved by a prolyl oligopeptidase. AMA1 and PHA1 are present in other toxic species of Amanita section Phalloidae but are absent from nontoxic species in other sections. The genomes of A. bisporigera and A. phalloides contain multiple sequences related to AMA1 and PHA1. The predicted protein products of this family of genes are characterized by a hypervariable "toxin" region capable of encoding a wide variety of peptides of 7-10 amino acids flanked by conserved sequences. Our results suggest that these fungi have a broad capacity to synthesize cyclic peptides on ribosomes.

Comparative proteomics of extracellular proteins in vitro and in planta from the pathogenic fungus Fusarium graminearum.

High-throughput MS/MS was used to identify proteins secreted by Fusarium graminearum (Gibberella zeae) during growth on 13 media in vitro and in planta during infection of wheat heads. In vitro secreted proteins were collected from the culture filtrates, and in planta proteins were collected by vacuum infiltration. A total of 289 proteins (229 in vitro and 120 in planta) were identified with high statistical confidence. Forty-nine of the in planta proteins were not found in any of the in vitro conditions. The majority (91-100%) of the in vitro proteins had predicted signal peptides, but only 56% of the in planta proteins. At least 13 of the nonsecreted proteins found only in planta were single-copy housekeeping enzymes, including enolase, triose phosphate isomerase, phosphoglucomutase, calmodulin, aconitase, and malate dehydrogenase. The presence of these proteins in the in planta but not in vitro secretome might indicate that significant fungal lysis occurs during pathogenesis. On the other hand, several of the proteins lacking signal peptides that were found in planta have been reported to be potent immunogens secreted by animal pathogenic fungi, and therefore could be important in the interaction between F. graminearum and its host plants.

Isolation of the carbon catabolite repressor (CREA) gene from the plant-pathogenic fungus Cochliobolus carbonum.

The CREA gene has been implicated in glucose repression in several fungi. The product of this gene, CreA, binds to the promoter region of several enzymes and down-regulates gene expression. An ortholog of CREA was isolated and characterized from the maize pathogenic fungus, Cochliobolus carbonum. The deduced amino acid sequence of the C. carbonum CREA gene is very similar to the CreA proteins of Aspergillus niger, Gibberella fujikuroi, Sclerotinia sclerotiorum and Trichoderma reesei, as well as the Mig1 protein of Saccharomyces cerevisiae. And like the other fungal proteins, C. carbonum CreA has two zinc finger regions and a nuclear localization signal. Putative CreA binding sequences were also identified in the 5' region of three C. carbonum cell wall degrading enzyme genes suggesting that the protein may play a role in the regulatory process that controls these enzymes expression.